Inconsistent Data, can't resolve issue

Hello,
I recently found it necessary to rebuild my Aperture Library, and shortly after I located several hundred grey squares with small red boxes on them (these were photos I had previously delted). I selected all of them and used the command-delete key command. It started to delete photos but was taking a long time so I force quit the application.
Now everytime I lauch Aperture I get the launch window, then the beach ball of death for a min or two, and finally a dialogue that says I have inconsistent data that that Aperture must quit to rebuild. The only problem is it doesn't rebuild.
I looked at some post with similar problems and have tried removing the Library.apdb file as well as the com.apple.Aperture.plist file. Neither of these methods solves the problem.
Any other solutions, or am I going to need to reinstall Aperture?
Kind Regards,
—Eric
Ash Films
<edited by host>

Turns out there were multiple types of the Library.apdb file that needed to be deleted. My Library is back up and running now.

Similar Messages

Can't Resolve Issue via Phone/Genius Bar/iTunes E-mail-iTunes Authorization

Issue with iTunes authorization - Full Conversation with iTunes tech support. ( Top : Most Recent - Less confusing if you read bottom to top )
*This is still not working, I followed the instructions as well as called Apple Support on the Phone. I visited a Genius Bar today and they too could not fix my issue.*
*When i try to authorize the 'other email address' I get this : "your apple id or password was incorrect". I tried to recover the password and i get: "This apple id doesn't exist."*
On Jan 24, 2009, at 6:27 PM, iTunes Store wrote:
Hey Zach,
Liz here! I now see that you had already tried that. I am sorry about my initial misunderstanding. I have gathered some information, and I will be happy to further troubleshoot this with you!
I found an article for you on the iTunes support website. I am sending you a link to this article, which I believe may help. Please review the article using the link below to troubleshoot this authorization issue, and remove the SC folder from your computer.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases:
http://support.apple.com/kb/TS1389
If you are still asked to authorize your computer after following the instructions in the article above, please let me know. I will be happy to help Zach!
I want to thank you once again for being such an extremely valuable member of the iTunes family. I really hope you will continue to be an active iTunes customer. Have a great weekend Zach!
With warm regards,
Elizabeth
iTunes Store customer Support
Thank you for allowing me the opportunity to assist you. You may receive an AppleCare survey email; any feedback you provide would be greatly appreciated.
*I do not believe you answered my question correctly, I said in my*
*question how i tried to authorize my music when a differnt email*
*address was in the apple Id field. I changed it to my current apple id*
*and I get the responce from the system with this computer is already*
*althorized, yet the song is still locked*
On 24/01/2009, at 5:00 PM, iTunes Store <[email protected]>
wrote:
Hello Zach,
I understand that you have been unable to authorize the purchases on
your iTunes account "[email protected]" due to three previous
account names not authorizing for you. I am sorry to hear about this
Zach. I can certainly appreciate how eager you must be to have this
resolved. My name is Liz, and I will be more than happy to help you
with this today!
If your computer is not currently authorized to play your previous
account name's purchases, when you double-click an item you
purchased before you renamed the account, the authorization dialog
may show the old account name. If this happens, you will need to
remove the old account name from the account name field, type the
new account name, and click Authorize. This authorizes your computer
to play the account's purchases.
If you are unsure about which account was used to purchase a
particular item, follow these steps:
1) Control-click (or right-click) the item in your iTunes Library.
2) Choose Get Info from the menu that appears.
3) Click the Summary tab. The account name will be listed on the
right.
If you need further assistance in locating the current account name,
please reply with the account name listed in your items' Summary
tab. In addition, please include the order number for those items if
possible.
You can locate order numbers by following these instructions on
reviewing your purchase history:
Seeing your iTunes Store purchase history and order numbers
http://support.apple.com/kb/HT2727
I sincerely hope that this helps. Please do not hesitate to let me
know if you have any further questions or concerns. I will be happy
to help. I appreciate your patience.
I want to thank you for being a valuable member of the iTunes
family. I hope you will continue to be an active iTunes customer.
Have a great weekend Zach!
With warm regards,
Elizabeth
iTunes Store customer Support
Thank you for allowing me the opportunity to assist you. You may
receive an AppleCare survey email; any feedback you provide would be
greatly appreciated.
*Customer First Name : Zach*
*Customer Last Name : xxxxx*
*email : [email protected]*
*Web Order # :*
*Support Subject : Authorization*
*Sub Issue : I can't authorize my system to play purchases*
*iTunes Account Name : [email protected]*
*Platform : Mac OS X 10.5*
*Country : United States (English)*
*Comments: I have contacted Apple's Phone Support and they could not*
*help me with my issue and referred me to this email address.*
*Problem : I currently have iTunes' Latest Version with a apple id*
*of : [email protected]*
*I've had iTunes for over 3-4 yrs. and over the time i've had changes*
*of email addresses and therefor I would update my itunes info to the*
*new current email address. I noticed how my Apple ID changed to my*
*new email address and proceeded thinking this was normal. Now when I*
*moved my iTunes with the migration assistance built in to Apple's OS*
*- Utilities, I can only play songs with my current apple ID - [email protected]*
*. If i were to play a song i purchased with :*
*"[email protected]" or even recover the password to this Apple*
*ID I get the response telling me "This apple ID does not exist." -*
*After reading online I tried replacing the field with "[email protected]*
*" with my current apple ID : "[email protected]". Once i click*
*'Authorize' the operation goes through and comes back with "This*
*computer is already authorized [ to that Apple ID*
*'[email protected] ]. I still try to play that song and it still*
*requires a authorization.*
*Previous E-mai; / Apple IDs :*
[email protected]
[email protected]
[email protected]
[email protected]
*Current Apple ID and E-mail Address :*
[email protected]
*TrackID: 7152211*
Message was edited by: dirty ankle

I also found, finally, that selecting "manually manage" for the device on the summary page in iTunes for the helped.

How can I resolve issue with Blue screen feature?

I am able to use the green screen feature ( using a green screen background), but when I use a blue screen background and I use the blue screen feature, it does not work. The background on the video with the blue screen turns RED and I see that video and not the selected background with the special effects.
any one has seen this before?

Solution found: https://discussions.apple.com/message/20363383#20363383

I have recently had to have my PC software re-installed due to a virus attack. When I have re installed iTunes my computer keeps closing it with a message that DEP (Data Execution Programme) will not allow iTunes to function. How can I resolve this?

I have recently had a full re-install of my computers software however once I have re installed iTunes it wont allow it to stay open and a message window reads iTunes has been closed due to DEP (Data Execution Programme). How can I resolve this issue?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

TTIMDB Connection issues: Can't resolve a non-optional query descriptor property [DSN]

Hi there,
We currently have the 11g TTIMDB plugin deployed in our EM10g instance without issue and looking to migrate to 12c. We've installed/deployed the 12.1.0.2.0 plugin into our EM12c instance and deployed it to 12cR3 agent on our TTIMDB dev server.
When adding the TTIMDB target in the same manner it's deployed in 10g, the connection tested fine to the DB however the target is showing down with the following errors.....
1. Under Monitoring > All Metrics we get this... "The TimesTen database is down: [data source/db name] is not loaded"
2. Under Target Setup > Monitoring Configuration we test the connection, and though testing the connection when first configuring the plugin worked fine it's now failing... "
Response;Can't resolve a non-optional query descriptor property [DSN] (DSN)"
Any thoughts on what may be causing these errors?
Thanks,
Steve

Maybe you are confusing the main daemon running (TimesTen instance is up) with a specific database being up? When you install TimesTen you create a TimesTen 'instance'. This instance has several daemon components the most critical of which is the main daemon. When the main daemon is running the instance is 'up' and when the main daemon is not running the instance is 'down'. An instance may manage several distinct databases concurrently and those may each be up (in memory) or down (not in memory) independently of each other. In order for anything meaningful to happen within an instance the instance must be up.
The default behaviour for TimesTen is to load a database into memory when something connects to it, to maintain it in memory while there are open connections and to unload it from memory when the last connection is closed. This can be useful for development and testing environments but is not necessarily the best choice for production environments. Generally, in a production environment, you should set the database(s) to 'manual' ramPolicy:
ttAdmin -ramPolicy manual DSN
then you can explicitly load the database into memory (i.e. start up the database):
ttAdmin -ramLoad DSN
and, when all connections have been close, you can explicitly shut it down:
ttAdmin -ramUnload DSN
Many customers find this a better way to manage production databases than the default behaviour.
Chris

After upgrading to lion vevo, youtube, and hbo no longer plays videos. I'm assuming this is some kind of plug-in issue. How can I resolve it?

After upgrading to lion, vevo, youtube, and hbo no longer plays videos. I'm assuming this is some kind of plug-in issue. How can I resolve it?

Adobe has published a list of known issues relating to Mac OS 10.7 Lion here:
http://kb2.adobe.com/cps/905/cpsid_90508.html
The download page for Flash Player for Mac is here:
http://get.adobe.com/flashplayer/?promoid=ISMRZ

"We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

I've been trying to download the photoshop free trial for the past three days but instead of installing a message saying "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I just backed up my photos by copying my iPhoto Library onto an external drive. Now the Library on my MacBook won't open. I can only open the photos if the external is plugged in. How can I resolve this issue?

I just backed up my photos by copying my iPhoto Library onto an external drive. Now the Library on my MacBook won't open. I can only open the photos if the external is plugged in. How can I resolve this issue?

Exactly what did you do?
The correct steps are
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
My guess is that that you have not switched iphoto to use the external drive yet - opttion launch and select libary
LN

How can I resolve a NAT config issues with Arris router & AE

I'm having NAT conflict issues. None of the existing threads on the forum match my configuration. I have an Arris Cable Router/Modem (Time Warner) with 4 ports. Port 1 feeds an unmanaged switch for ethernet connected devices, and port 2 on the Arris router feeds and Airport Express. Getting "Double NAT Status" on airport utility for the AE. How can I resolve this while not effecting my wired devices ? Thanks so much !

To resolve the NAT conflict you simply need to reconfigure the AirPort Express as a bridge.
You would do so using the AirPort Utility, as follows:
Run the AirPort Utility, and then, select the AirPort Express.
Select Edit.
Select the Network tab.
Change Router Mode to: Off (Bridge Mode)
Select Update and allow the Express to restart.

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query parameter to report parameter i need to pass distinct values. How can i resolve this

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve this

Hi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

When I dictate on my iPad and press done the dictation is erased, how can I resolve this issue

When I dictate on my iPad and press done my dictation is erased, how can I resolve this issue?

Another way besides tapping the text box is to tap the screen to bring the keyboard up, tap the .?123 key, then tap the undo key to bring the erased dictation back.

HT1349 my itunes player is skipping?how can i resolve this issue??

my itunes player is skipping?how can i resolve this issue??

See if anything here helps you: http://www.apple.com/support/itunes/troubleshooting/
perhaps http://support.apple.com/kb/TS1362 or one of the other troubleshooting articles linked there?
Message was edited by: EZ Jim
Mac OSX 10.8.2

TS1424 HI. I recently downloaded music to my devices, and there are 5 different songs that all downloaded as the same song. How can I resolve this issue?

I recently attempted to download 5 different songs to my iPhone, but all 5 downloaded as the same song. The correct titles show up, but when I play the songs they are all the same. How can I resolve this?

Hello there, jmcough.
I understand you are having issues with playback of purchased music. If iTunes in the Cloud is available in your country, it might be best to delete the song(s) from your device, then re-download from your purchase history.
To delete a song the following Knowledge Base article offers how to delete from your iOS device:
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Music
Open the section below for the device you are using.
iPhone, iPad, or iPod touch
Before you delete, find out if you'll be able to download the song you deleted again (it depends on where you live). To delete a song:
Tap the Music app.
Tap the Songs category.
Swipe left to right over the song you want to delete.
Tap Delete.
Afterwards, re-download the purchases from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I purchased an app for my Mac Book Pro. The app is called djay. Unfortunately it won't download. I get the following error message: Error 1004 please try again later. How can I resolve this issue?

I purchased an app for my Mac Book Pro. The app is called djay. Unfortunately it won't download. I get the following error message: Error 1004 please try again later. How can I resolve this issue?

Try contacting the app developer via email here > http://help.algoriddim.com/customer/portal/emails/new

HT4528 Howdy. I keep getting a message stating that my apple ID has been disabled. I recently contacted my CC company, AMEX, for several fradulent iTune charges, which is probably where the problem first originated. How can I resolve this issue?

Howdy. I keep getting a message stating that my apple ID has been disabled. I recently contacted my CC company, AMEX, for several fradulent iTune charges, which is probably where the problem first originated. How can I resolve this issue?

I had to dispute several unauthorized charges to itunes. My apple id was disabled after that. I followed jarnoldus's (older post) advice and it worked. Im duplicating his entry here with a few modifications. I hope this works for you.
1. Go to https://getsupport.apple.com
2. Choose your product (mine was ipad)
3. Click the "iTunes, App Store or iBooks" icon
4. Click "Apple ID account security"
5. Type in "apple id has been disabled"
6. Choose your country (mine was US)
7. Choose the "talk to apple support now" option
8. Provide the info they request (name, email, phone number)
9. They will call you right away.
Explain your apple id has been disabled. The rep will connect you to an iTunes rep. He/she will look up your account. You will be required to answer your 3 security questions. You MUST get a minimum of 2 correct. If you succeed they will enable your id. Good luck!

Inconsistent Data, can't resolve issue

Similar Messages

Maybe you are looking for