Incorporate existing iMovie project into new, longer one

I have an 8-minute iMovie project, with lost of careful editing (multiple sounds tracks, transitions, etc.)
I need to incorporate it as one section in a longer iMovie project I'm now working on. But when it becomes the one section of a larger project, I have to shorten it in half, to be only 4 minutes.
Two questions:
1) How do you insert an existing iMovie project into a new one -- bring over all the pieces at once, with everything in tact (music, transitions, etc.)?
2) This is a little more complicated. Since I have to boil down the 8 minute piece to 4 minutes, I'd rather not have to go back into the original and do painstaking editing -- which would involve rejiggering transitions, music fades, and all kinds of things. I'd rather export it to Quicktime, bring that into the new, larger iMovie project, where I can crop out parts I don't want and tie togehter the remaining pieces with transitions.
My concern: when I export original 8 minute project to Quicktime, doesn't that compress it? If so, and I bring that already-compressed Quicktime into new, longer iMovie project, when the new one is finished and I export it out to a DVD (end product) -- won't that be re-compressing the already compressed portion?
Thanks for any insights.
imac 20 inch Intel Mac OS X (10.4.8)
Mac OS X (10.4.7)
imac 20 inch Intel Mac OS X (10.4.8)

... or export as Quicktime/Full Quality file, which is a bit identical copy of your project => no quality loss ...

Similar Messages

Combining iMovie projects into a longer iMovie project

I have built a bunch of iMovie '08 projects and would like to combine some of them into a larger new iMovie project. I know how to drag movie events and photos to the new project, but do not see how to drag projects to the new project.
I already tried building the new project in iDVD without good results so it was suggested that I build it in iMovie. Can anyone help me out?
Thanks

There does not appear to be a way of merging projects together without a lot of manual work involved.
I have tried all the options that I would have expected to work (as I suspect you have), but as you say you only appear to be able to move the video from one project to another in one copy/paste. Then you need to do the other items separately (audio etc).
Perhaps a suggestion here for the next release:
http://www.apple.com/feedback/imovie.html
Ian

Importing older iMovie projects into new iMovie events

I recently upgraded to Snow Leopard and am running iMovie 8.0.5. I like the event library. But I have a number older iMovie projects, created a few years ago -- with pain -- from analog Hi8. I would rather not have to go through the pain of reimporting from the tape. Is there any conversion from iMovie 6 (cannot remember the actual version--it was a few years ago) project to the current event library?

Yes. File/IMPORT/From iMovie HD
See the HELP for the limitations.

Can I copy iPhotos from an existing iMovie Project to a new one?

Hi---I have iPhotos in an existing iMovie project (currently iMovie 11 version). For some reason, I cant seem to find them in my iPhoto library. But I want to use those photos in a new iMovie 11 project. I can highlight the photos and it allows me to click "Copy", but when I go to my new project to hit paste, they just don't show up. What am I doing wrong? Thanks in advance for any help you can give me. I really want to use these photos in my new project, but can't seem to figure out how to use them again. Thanks, Todd

Hi Todd,
It appears that your photos have been converted to video - hence the DV file extension. There are 3 things I can think of that may help.
Firstly, play the movie project full screen. Use the slider to locate the first image you want. While paused in that position, use the key combination Command>Shift>4 - a cross hair cursor will appear. Click and drag this diagonally across the image - as you release the mouse button (or track pad) the image will be saved to your Desktop.
The second option (and probably better) is to use MPEG Streamclip to extract stills from the video. It's available as a free download from the developer here:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Drag the the first video clip containing the still you want onto MPEG Streamclip's interface. Navigate to the exact frame, then from the menu select File>Export Frame - you can choose between JPEG, TIFF and PNG.
Another option is to duplicate the iMovie project then delete everything but the images you want from the duplicate. Rename the duplicate and use that as your starting point for your new project. To duplicate, while in Project Library view (not Edit view), click on the project then select File>Duplicate Project from the menu.
John

Combining several iMovie projects into one, time-not space-being the factor

Hello,
Space is not an issue (large external drive), but I'm trying to figure out the fastest way to combine several iMovie projects into one (so each movie will become a chapter in iDVD). I'm pretty sure there must be a better way than I'm attempting, selecting all the clips in clipviewer, then dragging and dropping to the new project clipviewer. As I've done this, the "time remaining" window keeps growing (started out about 4 minutes, climbed to "92 minutes remaining," then I aborted the move). Details: each movie is about 8-10 minutes long, widescreen, made up of various (sometimes many) dv clips, audio segments, still photos, etc.
I have added dv clips to a project via the media folder (project unopened), but this was a single item and simple to move from trash into the project. In this case, I'm not sure what to move in order to save the entire project intact.
Thanks so much for any help,
b
Message was edited by: Bimp

Thanks for your reply, Klaus. I'm just now getting to try your suggestion to copy and paste from timeline rather than drag and drop from clipviewer. Alas, it seems to be choking terribly on the transfer. This video is not a 60 minute movie, either; it's about ten minutes. I has about 60 files to it. I did get to the point where I felt confident enough to empty the trash and save the project, so I assume the clips that are there are not still "attached" to the unedited dvs.
Earlier I tried to export, in the advanced settings, to the full quality dv, but the quality really dropped, way too much for the intended use. I'm pretty much stumped at this point, unless I can hear some other suggestions.
What I might try doing is simply dragging and dropping all the packet contents of the media folder into the other movie's media folder, but then I suspect I'll have to rebuild the darn thing from bits and pieces and it may be like putting Humpty Dumpty back together again...ugh.
I'm sure I'm not the first person to face this challenge, am I? Of course, my lesson learned is to build one dvd's contents in one imovie project. If it weren't for the fact that I need to offer viewers the option to "play movie" (play all the videos as one movie) I'd simply drag each movie into iDVD and do it that way (the dvd showing each video separately).
Would still love to hear of other possible solutions here, before trying some other forum.
thanks!
B

How do you import multiple iMovie projects into one iDVD project?

Hi.
I'm 17, and am trying to create a DVD of when the family went on a cruise. For different places/days, I've created different iMovie projects.
But, when I want to export to iDVD, it only lets me put one iMovie project into one iDVD project?
I've tried dragging the actual iMovie project files into iDVD but that doesn't work.
I know I could export to QuickTime and then drag it into iDVD, but it seems exporting just to iDVD is much quicker, and the quality is better.
Anyone know how I can do this?
cheers
+P.S. If it helps, it's iMovie '11 with iDVD '09.+

That is not true. You can use them all in one DVD. I have just created my first DVD which has a trailer, a movie with chapters and several different slide shows.
All you have to do is save each project to Media Browser. (Choose Share in toolbar). Open iDVD and choose your theme or no theme. On the right will be all your options such as audio, media photo's etc. Choose your various video's/projects etc and just drag and drop which ones you want to the page and they will automatically put themselves there with the given name of each video/project.

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer.

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer. I copied the project files onto a hard drive, and then connected that drive to the Mac that my main project is on, but when I select "import" the files are faint gray -meaning I can't select them. Help! I want to transfer a sequence of shots from one iMovie 11 project on one computer, into another iMovie 11 project on another computer.

Tell me it ain't so!
I wish I could. The research you've done is correct.
Wether you copy and paste or rebuild the Project from the other computer, you're going to need to get your Evnets copied from the other computer.
The Prjoject files only contain pointer back to the original media.
Matt

Pls advise current info as to combining 3 iMovie projects into one iMovie. Thanks!

Pls advise current info as to combining 3 imovie projects into one imovie. I will finish with idvd.
I am in a rush today to complete a video for my brother's memorial for tomorrow. Thanks!

Thanks for your reply, Klaus. I'm just now getting to try your suggestion to copy and paste from timeline rather than drag and drop from clipviewer. Alas, it seems to be choking terribly on the transfer. This video is not a 60 minute movie, either; it's about ten minutes. I has about 60 files to it. I did get to the point where I felt confident enough to empty the trash and save the project, so I assume the clips that are there are not still "attached" to the unedited dvs.
Earlier I tried to export, in the advanced settings, to the full quality dv, but the quality really dropped, way too much for the intended use. I'm pretty much stumped at this point, unless I can hear some other suggestions.
What I might try doing is simply dragging and dropping all the packet contents of the media folder into the other movie's media folder, but then I suspect I'll have to rebuild the darn thing from bits and pieces and it may be like putting Humpty Dumpty back together again...ugh.
I'm sure I'm not the first person to face this challenge, am I? Of course, my lesson learned is to build one dvd's contents in one imovie project. If it weren't for the fact that I need to offer viewers the option to "play movie" (play all the videos as one movie) I'd simply drag each movie into iDVD and do it that way (the dvd showing each video separately).
Would still love to hear of other possible solutions here, before trying some other forum.
thanks!
B

Cannot import other existing imovie projects

I believe iMovie 5 is suppose to be able to import other existing iMovie projects. When I attempt this through the import function on another iMovie 5 project (in this case a single clip smaller than 600mb) it say "Error:Quicktime cannot parse clip" it says a little more than this actually but this is the part that seems to have any relevance.
It does this with bigger or smaller clips. I am running Quicktime 7 and have all the updates in place
.Anyone have any ideas.
G4dualproc Mac OS X (10.3.9)

If I read you correctly, you tried to import another iMovie HD project directly into a second project. You selected a project icon to import, correct?
iMovie HD can't do that, although the programmers forgot to tell iMovie HD. When we try, we get a "cannot parse" error. (The import dialog shouldn't allow us to select an iMovie HD project to import. It's a bug.)
There are other ways to do the same thing:
1) Do a Save As to copy Project A to a new Project B. That duplicates the entire project.
2) If you have an existing project you want to import clips to, you can Copy and Paste the clips from Project A to Project B. With Project A running, select all the clips, Copy, open Project B, Paste. Repeat for the audio clips.
Note that when Copying and Pasting try to copy all the clips you want together. If you don't, then any clips you copy and paste separately which share the same source file will cause iMovie HD to deliver TWO copies of the source file to Project B. That can hugely increase the size of Project B.
That occurs because Copy/Paste preserves the non-destructive editing of the clips. The Pasted clips behave just like the clips in Project A. A split clip can be restored to its original length, for example.
Karl

How to copy existing query report into new query report in SQ00

Hi Experts,
Hi Experts,
I want to add fields "company code" "'region" to existing query report AQZZ/SAPQUERY/FKF1============
(list of vendor address) for this i done as following:
1.In SQ01 go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
2.I typed F1 in query field and click change button
3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing query report into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK i am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
please help regarding this which should be very beneficiary to my carrier.
Regards,
naresh

Hi Experts ,
I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
Regards,
naresh.

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

How to splice 2 imovie projects into 1 project?

How to splice 2 imovie projects into 1 project?

Select what you want from one project. Edit - Copy then double-click other project to load it into the time line. Select where you want to add it (default is at end) and select Edit - Paste.
Geoff.

How to import existing jsp project into jdeveloper

can someone help me how to import existing jsp project into jdeveloper?
can give me step by step to import..cause i am new for jdeveloper..
thank you very much

Well there are two options - if you have a WAR file with the code in it, then you can use the file->import WAR.
Or you can use the new->Project from source code.
Note that you'll probably need to do some library settings and some directory setting after that.
Have a look at this demo for basic steps:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/NBtoJDevProject/NBtoJDevProject.html

Low quality of burned DVD even if I drag&drop iMovie project into iDVD

Hi all,
I've a iMovie HD project that I want to burn via iDVD (7.0.4).
If I click "Share with iDVD" the quality of the resultung video (which is burned to DVD) is rather poor. As I've read within this discussions, the preferred way is to close iMovie and "drag and drop" the iMovie project into iDVD.
With this way, iDVD (instead of iMovie) will render the movie, which should give a video with far more quality.
Unfortunately, the burned DVD with the "drag and drop" method has the same low quality as the video with "Share with iDVD".
I've done a little research and noticed that the "shared movie" for iDVD (iMovie project->Show package Contents->Shared Movies->iDVD) for a 1:10 video has a filesize of only 32kb!
Is there any way to set the "export" parameters for this "shared movie" (it is a quicktime file)?
The quality of the completed DVD is acceptable if I export the iMovie project to "DV stream" an import this stream into iDVD. But in this case I lose all my chapter markers of the movie ..
Is there any way to export the movie from iMovie HD and keep all the chapter markers for iDVD?
Importing the iMovie HD project into iMovie 08/09 is not an option, as I lose the chapter markers also ..
Thanks in advice,
Kind regards.

Hi,
the iMovie project was created as "DV" project and I imported DV PAL clips. The iDVD preferences are also PAL (25fps) and the quality setting is "professional quality".
I've also tried the setting "best performance" within iDVD (as suggested within this forum), but with the same poor result.
I can see within the iDVD "project info" that iDVD will use "mymovie.mov" within the "Shared Movies->iDVD" of the iMovie project (Show package contents).
As this converted movie is of low quality, I think this is the root of evil.
If I export the movie from iMovie with "Export as DV stream" and import this converted movie into iDVD the quality is ok - but I lose the chapter markers ..
Is there any way to keep the chapter markers?
Kind regards.

Where can I find "Ripping Software" to use to enable me to download a clip from the dvd of our wedding onto an existing imovie project?

Where can I find "Ripping Software" to use to enable me to download a clip from a dvd made of our wedding onto an existing imovie project?

Just do a search for Handbrake. That will do it for you.

Incorporate existing iMovie project into new, longer one

Similar Messages

Maybe you are looking for