InDesign not appearing on menus following install

InDesign not appearing on menus following install on Windows 7 and MAC.

Assuming that you haven't turned off "Display Navigation Menu" for these pages in the Page inspector, try the troubleshooting steps under "Fix iWeb" here....
http://www.iwebformusicians.com/WebMusic/iWebTips.html
Then republish to a folder and, after emptying the browser cache, launch the site in Safari again.

Similar Messages

Serial ports not appearing in MAX - VISA installed.

Hi All,
Had a rather strange issue today that I couldn't resolve with serial ports not appearing in MAX (and hence being inaccessible to LabVIEW). Under the windows device manager it shows 4 COM ports and I have verified with an external program that they are functioning correctly.
I had the LabVIEW 2011 SP1 f2 runtime installed, DAQmx 9.6.1 and NI-VISA 5.3 (5.2 also didn't work).
Things I have tried:
- Updating VISA from 5.2 to 5.3
- Reinstalling the COM port devices under device manager
- Changing the COM port numbers
- Verifying that the COM ports are functioning correctly
- Tried adding a USB to Serial converter as a new COM port
- Reinstalling MAX
- Reinstalling NI-VISA
- Reinstalling everything (reboot each time when prompted)
- Resetting the hardware configuration from within MAX
- Run installers / MAX as administrator (this is running from the local admin account)
- Checked that NI-VISA appears under software in MAX
- Repaired MAX/NI-VISA
Is there anything else that could cause the COM ports not to appear in MAX when they appear (and work correctly) in device manager when a reinstall of NI VISA / MAX won't solve?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets
Solved!
Go to Solution.

I found the solution - it turns out that the serial ports were available to LabVIEW, they just didn't show up in MAX because installing just the runtime does not show the devices in MAX.
Despite doing a lot of googling earlier, it didn't throw up this knowledgebase article until I searched for it under a different phrase - http://digital.ni.com/public.nsf/allkb/766FD80DAE42E52886256A0200619CFE?OpenDocument
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

BI Publisher Desktop 11.1.1.5 Does Not Appear In Word after install

I have a 2008 version of BI Publisher Installed against Word 2007 (Office Home and Student Edition) which works fine.
I de-installed this and installed the latest version but the BI Publisher tab does not appear in Word now.
I've repeated the exercise several times - I can install the older version and the plugin appears.
Any Ideas?
Mike
Edited by: mikelons on May 27, 2011 10:33 AM

I have a 2008 version of BI Publisher Installed against Word 2007 (Office Home and Student Edition) which works fine.
I de-installed this and installed the latest version but the BI Publisher tab does not appear in Word now.
I've repeated the exercise several times - I can install the older version and the plugin appears.
Any Ideas?
Mike
Edited by: mikelons on May 27, 2011 10:33 AM

HT201302 I am trying to import photos taken on my iPod Touch to my computer. I read the support article and when I connect my iPod the auto play dialogue box does not appear so I followed the steps to enable the behavior but my iPod is not listed. What ca

Am trying to import photos taken with my iPod touch to my windows 7 computer. When I plug in my iPod the Auto play dialogue box doesn't come up. I read the related article and tried to enable the behavior but when I go to the autoplay section and to devices the iPod does not appear in the devices menue . What can I do next? Thanks

So you tried here:
iOS: Importing personal photos and videos from iOS devices to your computer
Have you looked here:
iOS: Unable to import photos or device not recognized as a camera

Oracle Explorer not appearing in VS2005 after installing ODT 11.1.0.6.20

this was installed for both vs2003 & vs2005. Installation completed successfully.
loading up vs2003 for first time after ODT i was able to select Oracle Explorer option from the View menu, connect successfully and perform actions as expected.
loading up vs2005 for first time after ODT install i got an initial error saying "Command with same name already exists" - this error only occured the once.
in vs2005 the Oracle Explorer option does not exist in the view menu, but it has added the oracle data items to my toolbox. And in the VS About option it says Oracle Developer Tools for Visual Studio 11.1.0.6.20 is installed.
Where is my oracle explorer!!
Cheers,
Karen

Hi, Oracle Explorer was replaced by Server Explorer in VS 2005 onward. Please open up Server Explorer, add a new connection, and choose "ODP.NET" from the list of Data Providers.

Fonts not appearing in illustrator after installing

I am installing fonts in windows 7 by right clicking on the file and clicking install. After successfully installing the fonts, they aren't showing up in illustrator (or photoshop). I checked my windows font folder and the new fonts are indeed there. The newly installed fonts do work in other programs like Office. I am using CS3. Any ideas?

I remember fonts update inmediatly in Illustrator/photoshop as soon as you install it (at least in CS5 they do) but I'm unsure in CS3
Have you tried restarting Illustrator and see if the fonts are there? Also, could there be a chance that the fonts are corrupted or not supported by your version of Illustrator?
Just some thoughts.

IDisk does not appear in Finder (Lion installed.) How to access it?

Since installing Lion OS, iDisk no longer appears in the Finder on MacBook. It still appears as before on iPhone and iPad. How does one access iDisk -- or files stored there -- on the MacBook...?

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Spreadsheet Add-in connect dialog box do not appear after clean EPM-install

Clean install of EPM with allmost all values default.
version 11.1.2.1 on Win server 2008R2 and office 2010 32bit.
Smartview seems to function properly.
My impression from the documentation is that an installation of spreadsheet add-in does not require any post configuration, but maybe I am misstaken.
So what needs to be done for spreadsheet add-in to show connect dialog box?
Grant some kind of access in shared services?
Change some environment variable?
etc etc.
Edited by: 859699 on 2011-jul-20 05:30

Seems as if there is something fishy with the Essbase Java API, can this cause trouble for the Add-in?
When using the foundation diagnostic tool I get:
FAILED SVR: Essbase Java API Launch external checker with next command: C:\Oracle\MW\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** xxxxxxxx:****** http://xxxxxxxx:13080/aps/JAPI
Error: EPMVLD-01011: Result at EssbaseJAPIConnect.main(EssbaseJAPIConnect.java; Error message: 19)
Recommended Action: Make sure external checker is working.
When I try to launch that path manually I get: "The system cannot find the path specified."

Invoice document is not appearing in follow-on document list

Dear All,
I am customizing Classic scenario for my client. In our process, Shopping cart only created in SRM 5.0 system where as all follow-on document - PR/PO/GR/IV will be created on back-end SAP ECC 6.0 system.
My Issue:
1. Shopping cart appears in requested 'Check Status' list till the time PR, PO and GR created in back-end ECC system.
    SC disappear in the requester 'Check status' list the moment invoice entered in back-end ECC system. Do the problem
    is due to authorization issue ?
2. Other user who has SRM-Administrator authorization can view all such shopping cart in 'Monitor shopping cart' option.
    All follow-on document such as PR, PO and confirmation are appearing in Status check option both in graphics as well
   as table form. However invoice document is not appearing in the follow on document list. Do I need to enable any
   customization setting so that back-end invoice will appear in follow-on document list ?
<< Moderator message - Please do not offer points >>
Thanks in advance.
Regds,
Jennifer
   I don't find any
Edited by: Jennifer Batty on Nov 30, 2010 3:50 PM
Edited by: Rob Burbank on Dec 1, 2010 4:16 PM

Dear All,
Can some one help me on the below issue.
Thanks,
Jennifer

Invoice document not appearing in follow-on document list

Dear All,
I am customizing Classic scenario for my client. In our process, Shopping cart only created in SRM 5.0 system where as all follow-on document - PR/PO/GR/IV will be created on back-end SAP ECC 6.0 system.
My Issue:
1. Shopping cart appears in requested 'Check Status' list till the time PR, PO and GR created in back-end ECC system.
SC disappear in the requester 'Check status' list the moment invoice entered in back-end ECC system. Do the problem
is due to authorization issue ?
2. Other user who has SRM-Administrator authorization can view all such shopping cart in 'Monitor shopping cart' option.
All follow-on document such as PR, PO and confirmation are appearing in Status check option both in graphics as well
as table form. However invoice document is not appearing in the follow on document list. Do I need to enable any
customization setting so that back-end invoice will appear in follow-on document list ?
<< Moderator message - Please do not offer points >>
Thanks in advance.
Regds,
Jennifer
Edited by: Rob Burbank on Dec 1, 2010 4:10 PM

My problem got resolved.

New Folder does not appear on menu--how do I create new folders?

I have a macbook pro with ox version 10.7.2, and Firefox 7. I cannot create new folders because the option does not appear on menus. Is something missing here?

Hey ems6,
You might need to copy the installer to the USB disk on another computer.
Hope that helps.
Regards,
Anubha

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

Device Synch Menus does not appear in iTunes 11 on Windows 8 PC

My 3rd generation iPod Nano connected to Windows-8 PC and iTunes 11 - Device "Summary" menu does not appear. If you select the <File> menu in iTunes there is an option to "Synch Nano". My iTunes is set to manually manage music on the Nano - because the "Summary" menu does not appear in iTunes it is impossible to select albums to Synch with the Nano.
On the upper right bar there is an eject button for the iPod Nano. This does in fact eject the Nano device and re-appears in iTunes if you disconnect the device then reconnect the iPod Nano.
No other device menus are present in iTunes 11 under Windows-8. The iPod Nano music library also does not appear.
Only the PC based iTunes music library is visible.
Itunes software versions are both current on the Nano and Windows-8 PC.
The computer was deauthorized and then authorized in iTunes.
The Synch History was reset in iTunes Preferences - this did not re-establish the Nano as a device to synch with iTunes. (Typically fixes similar problems)
Resetting nano device by holding Menu after switching unit on/off (Apple Logo Appears then Reboots Nano) makes no difference.
Nano shows as a drive in Windows-8 in "My Computer" and the operating system recognizes the device connection.
No problem ejecting and reconnecting the Nano in Itunes but traditional device menus are gone with the exception of the eject button.
Tested the same iTunes Nano on two other computers with iTunes 11 installed on Windows-7 and Windows XP - works fine. This issue only occurs on Windows-8 computers.
Any suggestions would be appreciated.

I just updated iTunes today and this seems to be the cause
If you're already at version 11.1.5.5, try the procedure in Cerbu's post:
Re: sync problem
... or try section 5 from the following document:
TS1538: iOS: Device not recognized in iTunes for Windows.

Hello I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair. Following my issue relating to a

Hello
I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
This where I stand on this, I have not had my iMac for almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
I trust you will take this complaint seriously and pass it to the relevant department for action.
Yours sincerely
Des Withey
Sent from my iPad
On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
Thanks for contacting us.
Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
Case ID:
Open this case
Sincerely,
Apple Support
Get help online
Visit Apple Support to learn more about your product, download software updates, and much more.
Join the conversation
Find and share solutions with Apple users around the world.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
On behalf of Apple Distribution International

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

InDesign not appearing on menus following install

Similar Messages

Maybe you are looking for