InetAddress and hostname containing pause(s)

Hi!
I have a problem to get real host name which contains pause. On Windows NT 4.0 is possible to set NETBIOS name containing pause after a lot of warnings :)
It is not good idea to do so, but if some user do it, I'll have to find a way to understand.
Can I?
Simple code as:
InetAddress localHost = InetAddress.getLocalHost();
hostName = localHost.getHostName();
replaces all pauses with '-'.

What's a "pause"?

Similar Messages

  • How to get ip and hostname in application server 10g

    when i am using sys_context('USERENV','HOST') IN MY value based audit trigger it return ip address of application server.
    i want to get client's ip address and hostname that connect to application server 10g.
    Regards,
    Muhammad Touseef

    CKPT wrote:
    i want to get client's ip address and hostname that connect to application server 10g.you can find in listener.log file for all the client connections, or if any active sessions you can find from
    select username,machine from v$session;LOL
    You gave a totally correct answer. Unfortunately not relevant, though.
    Now take a look at that answer in context of the question. The question is "given that the environment is 3 tier, and given that the client to the database is an application server, how do we get the information about the client to the application server - one tier further out?"
    OP - this is a known problem with current application server configurations and applications. The only current way of providing that info is for the app server to capture and pass that info on. An easy way to pass it on, available to the app developer, is to use the DBMS_APPLICATION_INFO package.
    Perhaps one day the WebLogic Server folk will see fit to make that transparent. ;-)

  • How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

    how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

    Numbers can store pdfs pages or clippings but does not directly open pdf files.  To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
    Then hold the option key while selecting a column of data.
    Then copy
    Then switch to numbers and paste the column into a table
    Then repeat for the other columns in the pdf document
    It would be easier (in my opinion) to download the QFX or CSV version from your bank

  • Firefox 4.01 downloads files but the downloads windows greys out the "Open" and "Open containing folder" options and I can't trace the files

    Three days ago I upgraded to Firefox 4.01. I downloaded several files that were ok. Yesterday and today I downloaded one powerpoint file and a an apple *.dmg file.
    On the Download window these two files I can see with the total mb in size. However when I right click the file list in the Download window the "Open" and "Open containing folder" options are greyed out. What is more I cannot find these files anywhere on my computer when I use Windows Explorer to search.
    It seems that this happened after I tried to download a Firefox add on from http://releases.mozilla.org/pub/mozilla.org/addons/64761/amazonassist-0.7.2.6-fx.xpi and my antivirus picked up the JS/Kryptik.AK trojan and terminated the connection. Is there a link with the problem I am experiencing?
    I use Windows 7 professional, Firefox 4.01

    You're welcome

  • VM Server got a new IP and hostname. How to update VM Manager?

    Test environment: VM Server 2.2.1 / VM Manager 2.2.0
    The VM Server has a number of virtual machines running in it. It is all on 1 physical machine with local disks.
    Our VM Server now got a new IP-address and hostname after physical move. How to get VM Manager pick up the modified VM Server again and pick up the Virtual Machines?
    Is this just a matter of 'Delete Server’ followed by ‘Add Server’ in the VM Manager or will I have to configure all Virtual Machines from scratch in that case?
    (Could I possibly update the OVS.OVS_SERVER table with the new IP-address and hostname?)
    Thanks for any help!
    Regards,
    Klaas.

    Hi Klaas,
    not quite that easily, because if you remove a server all information of the images will be deleted as well (just the information, not the images itself!).
    So
    => Delete Server
    => Change IP/Hostname
    => Add Server back (with the then new name)
    Then you have to import and discover all VMs again.
    So go to "Resources" => "Virtual Machine Images" => "Discover" ....
    PS: If you changed the hostname/IP already you can use cleanup.py to remove all registration information from the server (not the VMs.)
    Then you can register the server again.
    Changing the OVS schema table will probably be the easier way... but I don't know if this is supported.
    Sebastian

  • Cloned Dac, Informatica and OBIEE want to change the ip and hostname

    Hi Gurus,
    I recently cloned my OBIEE env on virtual machines on OEL ( Linux)
    I want to change the hostname and ip address to make the services up with new IP and hostname.
    I started the Database(11gR2) single instnace successfully. Please let me know what all changes need to be done to start the dac(10.1.3.4), informatica(9.0.1 Hotfix 2) server and also OBIEE(11.1.1.7.1)
    I did run ./startServerprompt.sh for DAC but still the service cannot be started.
    Thanks in advance.
    Regards

    Hi kt1,
    Informatica and DAC is also on Linux servers. As a first step I'm trying to start the services on  DAC and Informatica servers but still no luck.
    When I'm Trying to start it gives me the following error in the log
    For Informatica:
    Domain service init method is called
    java.net.UnlnownHostException: santa.pti.local (which is the  wrong hostname)
    it should be picking up the new hostname panta.pti.local
    but I don't know where exactly is this information stored and how to get over it.
    The same case is with DAC server when I try to start it it's picking up the wrong hostname
    Anybody who can help me get through this. I have go ogled  it but so far I couldn't solve it.
    Appreciate if anyone could help me solve this.
    Regards,

  • I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • How to change IP address and hostname in solaris 9

    Hi experts,
    I want to change IP address and hostname of the server , Plese give steps, or any precise document .
    Thanks
    Mohan
    Message was edited by:
    mohan_sr

    did you already change your ip and host?
    if not, do the following instructions:
    * verify your hostname
    - uname -a
    - cat /etc/nodename
    both should show your hostname
    * alter your hostname
    - uname -S newname
    * verify the hostname
    - uname -a
    - cat /etc/nodename
    both should show your newname
    * edit /etc/hostname.ce0 (type ce0 depends on your net device)
    - echo 'newname' > /etc/hostname.ce0
    * verify /etc/hostname.ce0
    - cat /etc/hostname.ce0
    should show your newname
    * edit the following files
    - /etc/net/ticlts/hosts
    - /etc/net/ticots/hosts
    - /etc/net/ticotsord/hosts
    replace old with new hostname
    * edit /etc/inet/hosts
    replace ip and hostname
    * you have to look for
    - /etc/inet/networks
    - /etc/inet/netmask
    fit yout data
    After doing all changes you have to reboot your system.
    Use ipconfig to verify network data

  • How do i test a record containing status E0008 and not containing status I0002

    hello all,
    how do i test a record containing status E0008 and not containing status I0002  for a given WBS Element....
    the data(like pspnr, posid and objnr from table PRPS are avialable in internal table it_prps)....

    Hi,
    You can check the received table from the function module as per your condition.
    loop at it_prps.
         call function STATUS_READ and pass objnr
              "suppose tables parameter data is in table itab
         Read table itab with key STAT = 'E0008'. "check for E0008
           if sy-subrc = 0.
              read table itab with key stat = 'I0002'. "if E0008 exists then check for I0002
                   if sy-subrc = 0.
                       "both status E0008 & I0002 exists so delete this record from it_prps
                        delete it_prps.
                   else.
                       "only status E0008 exists.
                   endif.
         endif.

  • On mozilla's OWN WEBSITE I get the message 'Your Firefox is out of date and may contain a security risk!" but I just download and installed the latest version?

    I have the latest version of firefox to date (10/15/2014 v32) and I still get messages while on various websites (Youtube, Google, Gmail) telling me that Your Firefox is out of date and may contain a security risk.
    I even get that message on the support pages of mozilla.org??
    I've tried the about:config reset the useragent(s) fix but that doesn't work.
    I've tried browsing in safe mode and still get the error.
    Why is this False/Positive happening?
    Thanks

    hello your useragent (the information the browser sends to websites to identify its version) - apparently mistakenly - shows this:
    Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20140923 '''Firefox/4.0.0; xs-A30GTmfXR3o;CkHZPf;'''
    probably some sort of unwanted software has overwritten it. please refer to this article in order to reset the user-agent settings in firefox:
    [[Websites say that Firefox is outdated or incompatible even though it's the latest version]]
    in case this does not help, please try to reset the whole browser:
    [[Reset Firefox – easily fix most problems]]

  • I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, a

    I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, and it freezes. If I go to Task Manager, I can see the two Adobe apps sucking up CPU cycles. If I end the processes, then the other apps continue. Today, I uninstalled FlashPlayerPluginqand plugin-container. All day since I have had no freezing of an app. What should I do to correct the problem?

    Here's an explanation of what those processes are. 
    Inside Flash Player Protected Mode for Firefox
    I'm curious about what you did to uninstall just those.

  • HT204406 i recently purchased itunes match and it constantly pauses when i try to listen to my library on my iphone 5.  help!!!!!!!!!!!!

    i recently purchased itunes match and it always pauses on my iphone 5 when i try to listen to my library    help!!!!!!!!!!!!!!!!!!!

    Hi mdr1976,
    Thanks for visiting Apple Support Communities.
    You can use iTunes Match to access your entire iTunes library on your computer and iOS devices.
    You can access your iTunes library on your Apple TV using Home Sharing, which is why it only works when your MacBook is turned on.
    See these articles for more information about Home Sharing:
    Understanding Home Sharing
    http://support.apple.com/kb/ht3819
    Setting up Home Sharing for Apple TV (2nd generation and 3rd generation)
    http://support.apple.com/kb/ht4352
    Regards,
    Jeremy

  • I cannot open GarageBand on my iPad gen. The GB icon steps shaded and is labeled 'pause' or 'waiting'. My iOS 5.1.1 GarageBand ver. 1.2.1'

    I cannot open GarageBand on my iPad gen 1. The GB icon stay darkened (shaded) and is labeled 'pause' or 'waiting'. My iOS 5.1.1 GarageBand ver. 1.2.1. Sometimes a dialog box appears and reads, "unable to complete download" and "consider freeing up space, go to settings." Problem is I'm not tying to download GarageBand upgrade because it requires iOS 6 or higher. Does Apple have. Archive sites with older versions of GarageBand?

    No, it will still stay as IOS 7.0.4

  • Can I use ADF Logger in non-ADF applicaiton and outside container?

    Hi all,
    I want to use ADF Logger feature in non-ADF applicaiton and outside container. Is that possible?
    Thanks,
    Xianyi.Ye

    I figured out "partially" the problem, I tried to overrid the create method, and for any reason the commit operation wasn´t working.
    I was trying to set a value for a proprety, but it did not work as a wish.
    My intention was.... when an user execute the form. one specific field brings a value.. however I cannot set default value. cause it´ll change sometimes.
    it´s something like this
    protected void create(AttributeList attributeList) {     
    super.create(attributeList);
    setMyProperty(new Number(0));
    do you know how can I figure out this problem?

  • System name and hostname in Technical system

    while configuring Technical system in SLD of PI 7.0, it asks System name and hostname.
    can you differentiate them or what data we have feed them?

    Hi Gabriel,
      When defining the Technical system in the SLD you have to mention the name of the technical system which is to be given in the system name option and as the technical system is the physical system so you need to mention the host name which is to be provided in the hostname option. Generally we will give the domain name in the hostname parameter.
    Please refer the below link for more info:
    https://www.sdn.sap.com/irj/sdn/wiki --> working with SLD.
    Regards,
    Prasanthi.

Maybe you are looking for