Info about AUTHORITY-CHECK

Hi all.
in CJ02 I have this autorization check:
AUTHORITY-CHECK OBJECT 'C_DRAD_OBJ'
             ID 'ACTVT' FIELD lt_display-mode
             ID 'DOKOB' FIELD object
             ID 'STATUS' FIELD ls_draw-dokst
             ID 'DOKAR' FIELD ls_draw-dokar.
    IF sy-subrc <> 0 .
no AUTHORITY
the sy-subrc is <> 0. how can I see the data into this object? can i add data into?

Hi Fabrizio,
1. This is a normal
   'authorisation not there'
issue.
2. Contact your basis team
   and they will help out
   by assigning the values
   for the particular auth object
   for the required profile
   for the particular user !
regards,
amit m.

Similar Messages

About authority-check object 'M_MATE_WGR'

hi all
I have a problem about authority-check object 'M_MATE_WGR'. the detail is bleow:
Read table T023 where the material group is in select option s_matkl. Then loop at the results and check for every found material group. If the user is authorized to use it with the ABAP statement AUTHORITY-CHECK with object M_MATE_WGR with parameters ACTVT = 03 (display) and BEGRU = the material group. When the user is allowed to use it, store it in an internal table and continue with the remaining materials groups from T023. When the user is not allowed to use it, set the status flag to X and dont save the current material group in the internal table.
After all checks have been done, empty the select option s_matkl. Loop over the internal table with the allowed material groups and fill up the select option s_matkl again with these records.
Thank you in advance .
Nick

You are on the right track. Authorization object M_MATE_WGR checks the Authorization Group (BEGRU) not the Material Group. You read table T023 with the Material Group to get the Authorization Group.
Step 1: Read table T023 where MATKL = the Material Group you want to check authorization.
Step 2: Retreive the value in field BEGRU from the record in table T023. Use the value in T023-BEGRU to pass to the AUTHORITY-CHECK object M_MATE_WGR.
Hope that helps.

About authority check~

Hi!
Let me ask something.
As usual, when we call a program using T-CODE in command field, R3 checks the authority. even BDC prog.
But, in program text, I programed like this. "CALL TRANSACTION XXX".
the system doesn't check authority.
for example, A user type 'XD01' in command field, system denyed. but, A user call 'XD01' through my progam. system admitted it. and in my program, I coded like this "CALL TRANSACTION 'XD01'.
I don't know why... Have you ever seen like this?
If sb know this, please let me know! what shold I do for it!
sorry for my poor english, I need your help~~

Hi Kyung Woo,
When the user enters the transaction code, let's say XD01, the R/3 system would get the authorization information as defined in the user's profile and check if the authority object required to execute the transaction exists in the user's profile. This is just a preliminary check. It prevents the non-technical users from accessing the transaction.
But when it comes to a technical user like an ABAP Programmer, almost anything can be done within the R/3 system. For example, you can just write a small program of about a few lines and cause serious damage to the entire R/3 System.
The point is that when you use the CALL TRANSACTION statement, it means that you are writing the program to accomplish some functionality. The preliminary check is bypassed in this case. But if there's an authority check coded into the transaction, then even the CALL TRANSACTION method won't work.
But remember one thing - so long as you are an ABAPer, with the authorization to create a program in SE38 and execute it, along with the authorization for Debugging, you can do almost anything within the R/3 system.
It is upto the programmer and the company to take care of any such mishaps happening. Anyways, when it comes to the Production system, your hands are all tied up. you would never have the authorization to do any development directly in there. If you do, then somebody is in very deep trouble !!:-).
As far as the Development system is concerned, nobody really bothers too much about them, because they do not affect any real-time data.
Regards,
Anand Mandalika.

How to create Authority check object

Hello Gurus,
How to create Authority-check object 'ZABC'
                                                         ID 'TABLE' FIELD 'ZTABLE'.
Please tell me detailed procedure.
Thanks in advance.
Best Regards,
zubera

Dear Zubera,
Creating Authorization Fields
In authorization objects, authorization fields represent the values to be tested during authorization checks.
To create authorization fields, choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects ® Fields.
To create a authorization field:
1. Choose Create authorization field.
2. On the next screen, enter the name of the field. Field names    must be unique and must begin with the letter Y or Z.
3. Assign a data element from the ABAP Dictionary to the field.
4. If desired, enter a check table for the possible entries. For    more information about check tables.
For more information about AUTHORITY-CHECK, see the keyword documentation of the ABAP Editor.
You can often use the fields defined by SAP in your own authorization objects. If you create a new authorization object, you do not need to define your own fields. For example, you can use the SAP field ACTVT in your own authorization objects to represent a wide variety of actions in the system.
Assigning an Authorization Object to an Object Class
Each authorization object must be assigned to an object class when it is created.
Choose Tools --> ABAP Workbench --> Development --> Other tools --> Authorization objects --> Objects.
You can also create authorization objects in the Object Navigator (SE80).
Creating / Choosing Object Classes
The system displays a list of existing object classes.
Object classes are organized according to the components of the system.
Before you can create a new object, you must define the object class for the component in which you are working. The objects are not overwritten when you install new releases.
You can also define your own object classes. If you do so, select class names that begin with Y or Z to avoid conflicts with SAP names.
Creating an Object
Enter a unique object name and the fields that belong to the object. Object names must begin with the letter Y or Z in accordance with the naming convention for customer-specific objects.
You can enter up to ten authorization fields in an object definition. You must also enter a description of the object and create documentation for it.
Ensure that the object definition matches the AUTHORITY-CHECK calls that refer to the object.
Do not change or delete authorization objects defined by SAP. This disables SAP programs that use the objects.
You can regenerate the profile SAP_ALL after creating an authorization object.
Best Regards,
Rajesh
Please reward points if found helpful.

RE: Authority checks included in the info set of the query

Hi all,
I am checking the program code for one of our custom tcodes and i asked ABAP team to add authority check to the program code because there is no auth check in the code and abapers told me that the authority check is included inside the info set of the query and not in the program . the program is used to execute the query in the Tcode.
how to find the Authority checks included in the info set of the query.
Thanks in advance,
Sun.

If you have the BI support roles assigned to you and the security admin roles please login to the BI system
execute transaction RSECADMIN, click on the analysis tab and execute as the user who is assigned the role with restrictions.
For variables in authorizations like ( type customer exit )
use RSECADMIN - maintain authorization tab - Click on value authorization tab.
Keytransaction is RSECADMIN & infoobject maintenance details you can get from RSD1.
Regards

Info, detail about package check ?

Hi,
Does anybody have any documentation about package checks?
I would like to perform cross package checks, already went though <a href="http://help.sap.com/saphelp_47x200/helpdata/en/37/72b3392f65f530e10000000a114084/frameset.htm">Package Builder Online help</a> and found OSS Note Number: 648898 - Switching on the package check, however this area seems to have lack of documentation.
Found some info about table PAKPARAM in the mentioned OSS note, however I couldn't find any info about PAKCHEKTYP and all of the PAK* tables.
It seems checks are performed via PA_SLIN_PACKAGE_CHECK.
Any info or detail is appreciated.
Thanks in advance,
Peter

Hi Fabrizio,
1. This is a normal
   'authorisation not there'
issue.
2. Contact your basis team
   and they will help out
   by assigning the values
   for the particular auth object
   for the required profile
   for the particular user !
regards,
amit m.

How get info about computer app is running on?

I am making an application that will have a license for running on only one computer at a time. I will have a license file that will hold info about the app, its version, etc. But I also want to put info about the computer that it's being installed on (none of that info will be sent to me, just saved in the license - enrypted - so the license can't be used on a diff computer). I do NOT want the OS name and version (they can change that) but the actual computer info.
I know some C/C++ programs can do this, but is there any way to get this info from java? Does anyone have any sample code or even just suggestions of places to look for this information? It'd be greatly appreciated!
Thanks in advance!

I know it's not a perfect solution - yes someone could
decompile it, but how many people do that or know how
to do that? Well, most semi-decent Java programmers know how to do that. Then they'll decompile and crack it and distribute it, provided that your
program actually is something good.
While doing what I suggest wouldn't stop
100% of the users from pirating my software (which I'm
attempting to make a living off of), it would stop
MORE than if I didn't do it.Probably it'd annoy more potential customers. It's a very bad idea to piss off the customers.
As for changing the HD, or even the computer it's on,
that would be totally possible. The app is equipped
with a way to invalidate the license so it won't work
on that computer, and contact my site to invalidate
the public key and then allow them to redo it on
another computer/HD. It all would take only about 2
minutes actually, so it's not even an inconvenience.As a potential customer I'd have to disagree.
I see no problem with that.Yes, but you're the author not the customer.
Do you or anyone else know of a way to do this, even
if not through Java, in C (JNI) or C++?Through JNI it's possible naturally, but I don't know the specifics.
The reason
it's a big deal is this: for a company like MS if only
20% of the users of their product actually pay for the
product, they're still making millions. If only 20% of
the users paid for mine, I wouldn't even have enough
money to live for 3 months!Get a job? :) Sorry, but seriously having copy protection isn't really going to make a difference. If your product is really good it will get cracked, if it's a specialized piece of software that won't be circulating in the mainstream, then a simple license check would suffice.

ALV GRID and AUTHORITY-CHECK

Hi all !!!
I'm using the ALV Grid control with checkboxes and I want to control if the actual user have the appropriate authorization to check/uncheck them.
In the AUTHORITY-CHECK call, I want to make the authorization test on the "DEPARTMENT" of the user (from Table USER_ADDR or SU01).
For example :
DEPARTMENT AA1 --> check/uncheck OK
DEPARTMENT AA2 --> check/uncheck NOT OK
DEPARTMENT AA3 --> check/uncheck OK
... etc.
How can I do ? Create an new authorization object/field ?
PS : it's the first time I'm using AUTHORITY-CHECK..

Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
   ID <authority field 1> FIELD <field value 1>.
   ID <authority field 2> FIELD <field value 2>.
   ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
Example ;
REPORT EXAMPLE MESSAGE-ID Z1.
TABLES: USR02.
PARAMETERS: LOCK AS CHECKBOX, LISTLOCK AS CHECKBOX.
DATA: UFLAGVAL TYPE I, LOCKSTRING(8) TYPE C.
---- Authorization check -
AUTHORITY-CHECK OBJECT 'ZPROG_RUN' ID 'PROGRAM' FIELD SY-CPROG.
IF SY-SUBRC <> 0.
IF SY-SUBRC = 4.
    MESSAGE E000 WITH SY-CPROG. "some message about authorization check failure
ELSE.
    MESSAGE E005 WITH SY-SUBRC. "some message about authorization check failure
ENDIF.
ENDIF.
IF LISTLOCK = 'X'.
WRITE:/ 'List all locked users: '.
SELECT * FROM USR02 WHERE UFLAG = 64.
    WRITE: / USR02-BNAME.
ENDSELECT.
EXIT.
ENDIF.
IF LOCK = 'X'.
UFLAGVAL = 64.                       "lock all users
LOCKSTRING = 'locked'.
ELSE.
UFLAGVAL = 0.                        "unlock all users
LOCKSTRING = 'unlocked'.
ENDIF.
SELECT * FROM USR02 WHERE BNAME <> 'SAP*' AND BNAME <> SY-UNAME.
IF USR02-UFLAG <> 0 AND USR02-UFLAG <> 64.
    WRITE: 'User', USR02-BNAME, 'untouched; please handle manually.'.
    CONTINUE.
ENDIF.
check that user has authority to make these changes
AUTHORITY-CHECK OBJECT 'S_USER_GRP'
      ID 'CLASS' FIELD USR02-CLASS
      ID 'ACTVT' FIELD '05'.
IF SY-SUBRC <> 0.
    IF SY-SUBRC = 4.
      WRITE: /'You are not authorized to lock/unlock user ',
        USR02-BNAME, USR02-CLASS.
    ELSE.
      WRITE: /'Authorization error checking user ',
             USR02-BNAME, USR02-CLASS, '(return code', SY-SUBRC, ').'.
    ENDIF.
ELSE.                                "has authority
    UPDATE USR02 SET UFLAG = UFLAGVAL WHERE BNAME = USR02-BNAME.
    WRITE: / 'User', USR02-BNAME, LOCKSTRING, '.'.
ENDIF.

Need info about RH Server 6 and reports

I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.

Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John

Web Service Homepage: Authority check failed

Dear Colleagues,
I have created a Web Service and now I want to test it via its Web Service Homepage (TA WSADMIN). The Homepage is displayed correctly, but testing leads to an error:
Authority check failed
Are there any prerequisites I maybe do not accomplish?
(I tested a very similar web service in another system, and there it works)
Here are some more information about my service:
- Service was build with Web Service Wizzard out of a function module
- Here you can see the conversation resulting of the test:
POST /sap/bc/srt/rfc/sap/Z_TEST_Q73_CONFIG_WS?sap-client=003 HTTP/1.1
Host: bsl8011.wdf.sap.corp:50073
Content-Type: text/xml; charset=UTF-8
Connection: close
Cookie: <value is hidden>
Cookie: <value is hidden>
Authorization: <value is hidden>
Content-Length: 381
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns1:Z_TEST_WS_CONFIG xmlns:ns1='urn:sap-com:document:sap:rfc:functions'>
<INPUT>TEST</INPUT>
</ns1:Z_TEST_WS_CONFIG>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
HTTP/1.1 500 Internal Server Error
content-type: text/xml; charset=utf-8
content-length: 363
sap-srt_id: 20060404/125124/v1.00_final_6.40/1B0831447838C429E10000000A424016
server: SAP Web Application Server (1.0;700)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Body>
<soap-env:Fault>
<faultcode xmlns:n0="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">n0:FailedAuthentication</faultcode>
<faultstring xml:lang="e">Authority check failed</faultstring>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>
The WSDL-Document looks as follows:
<?xml version="1.0" encoding="utf-8"?><wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><wsdl:types><xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified"><xsd:simpleType name="char60"><xsd:restriction base="xsd:string"><xsd:maxLength value="60"/></xsd:restriction></xsd:simpleType><xsd:element name="Z_TEST_WS_CONFIG"><xsd:complexType><xsd:sequence><xsd:element name="INPUT" minOccurs="0" type="tns:char60"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="Z_TEST_WS_CONFIGResponse"><xsd:complexType><xsd:sequence><xsd:element name="OUTPUT" type="tns:char60"/></xsd:sequence></xsd:complexType></xsd:element></xsd:schema></wsdl:types><wsdl:message name="Z_TEST_WS_CONFIG"><wsdl:part name="parameters" element="tns:Z_TEST_WS_CONFIG"/></wsdl:message><wsdl:message name="Z_TEST_WS_CONFIGResponse"><wsdl:part name="parameters" element="tns:Z_TEST_WS_CONFIGResponse"/></wsdl:message><wsdl:portType name="Z_TEST_Q73_CONFIG_WS"><wsdl:operation name="Z_TEST_WS_CONFIG"><wsdl:input message="tns:Z_TEST_WS_CONFIG"/><wsdl:output message="tns:Z_TEST_WS_CONFIGResponse"/></wsdl:operation></wsdl:portType><wsdl:binding name="Z_TEST_Q73_CONFIG_WSSoapBinding" type="tns:Z_TEST_Q73_CONFIG_WS"><soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/><wsdl:operation name="Z_TEST_WS_CONFIG"><soap:operation soapAction=""/><wsdl:input><soap:body use="literal"/></wsdl:input><wsdl:output><soap:body use="literal"/></wsdl:output></wsdl:operation></wsdl:binding><wsdl:service name="Z_TEST_Q73_CONFIG_WSService"><wsdl:port name="Z_TEST_Q73_CONFIG_WSSoapBinding" binding="tns:Z_TEST_Q73_CONFIG_WSSoapBinding"><soap:address location="http://bsl8011.wdf.sap.corp:50073/sap/bc/srt/rfc/sap/Z_TEST_Q73_CONFIG_WS?sap-client=003"/></wsdl:port></wsdl:service></wsdl:definitions>
Can anyone help me, I have no Idea
Message was edited by: Hans-Peter Bauer

The message server defined in the SAP-Logon is us4278.wdf.sap.corp
But the url of the web service starts with http://us4185:58500/wsnavigator/jsps/explorer.jsp?description=WebServiceZ_TEST_Q73_CONFIG_WS
But I think that's not the problem, is it? As I mentioned above the test page can be shown, but the after filling in the input parameters an pressing send, there appears the authorisation error.
For better illustration I made some screenshots for you:
1) http://wipux2.wifo.uni-mannheim.de/~wi01211/sonstiges/WS_HOMEPAGE_OVERVIEW.gif
2) http://wipux2.wifo.uni-mannheim.de/~wi01211/sonstiges/WS_HOMEPAGE_TEST_INPUT_FORM.gif
3) http://wipux2.wifo.uni-mannheim.de/~wi01211/sonstiges/WS_HOMEPAGE_TEST_reqest_response.gif
What can be wrong, if the error "n0:FailedAuthentication" appears?
Regards,
Peter
Message was edited by: Hans-Peter Bauer

How to use the AUTHORITY-CHECK in ABAP

I am a security guy but am trying to understand how the AUTHORITY-CHECK works. I have read the help on it but it doesn't answer to my understanding. I want a check in a report so that no matter what the user selects the program goes out and checks the authorization in the users master record and only displays what he has access to. I am sure this is basic but I am not a programmer.
Thanks

Hi Greg,
Basically a AUTHORITY-CHECK is a programmatic way to check a auth object a user has. This is only as good as the person writing the code makes is.
Here is a basic example of how it could work. Lets say you have auth objects for users that limit them to see company code. User A can see cc 10, User B can see cc 20 and user C can see both.
In the code the programmer would have to first do the authcheck to see what CC the user has access to. Then they would have to limit his reporting based on the results of the authority check. So they might do it by saying SELECT * FROM XYZTAB WHERE COMPANY CODE = AUTHCC
This is what I think you are looking for. There are other ways to use the auth check. You can do a check and end the program with a message if they don't have authorization.
If you need more info, let me know
John

Oracle 10.1.2 reports create info about alljobs

Hello!
I need to create something like mail info when some reports jobs hang.. sow i think i will need to find way to check reports server for current jobs from command line someone knows that tool? Get info about current jobs from commnad line not from web?
Regards - Marcin

on unix-like systems - rwrqv.sh oracle_home/bin - Oracle OAS 10.1.2
on unix-like systems - rwrqv60.sh oracle_home/bin < Oracle OAS 10.1.2
but on windows... hmmm can`t find maybe somone?

Authority check based on the tables used in a programme

based on the tables used in a programme can I see authority checks available in the system.If yes how do i go about it .

Using the below FM:
SUSR_USER_AUTH_FOR_OBJ_GET
EFG_USER_AUTH_FOR_OBJ_GET
You can get all the autority check available for a user.
Regards,
Prakash.

Need some info about Equium A60

Hi,
I am looking to upgrade RAM on my laptop which is a Equium A60 (PSA67E-001004NO). I need to know what speed my motherboard supports... I posted a question some time back and got the impression that my laptop can take 533mhz but I enquired other places and got the idea that my laptop supports 333mhz. I need to know the correct value my motherboard supports. Whether its 333mhz or up over..
One thing more I need to know is there any way one can check for the configuration that laptop has, because there is nothing about this Equium on the net or Toshiba site...
I remember to see a page on which all hardware and preinstalled software details of Equium A60 PSA67E-001004NO were on the net but I fail to remember where I saw it..
Can someone help in any way?

Hi
Your notebook has 256MB internal memory and just one slot is available for memory expansion. I have found info that your unit can handle with 1280MB max.
The compatible memory modules are:
PC2700 256MB (PA3311U-1M25)
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
If you want check part numbers on Google and you will find out all info about those modules. I have no time now to check it for you.
Bye

Info about AD Domain Controller to which I'm connected

Hi,
Is there a way to find the AD Domain Controller to which I'm connected ?
Some time I find the info in these file :
/Library/Preferences/OpenDirectory/DynamicData/Active Directory/<MYDOMAIN>.plist
under 'last used server' but this field is not always populated..
Is there any other place where find or some command to use ?? (or even more info about the previous plist file and how is created/populated.. i have several Macsac on same domain but not all computers have the file populated in the same way..)
Any help appreciated
Thanks
m.

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Info about AUTHORITY-CHECK

Similar Messages

Maybe you are looking for