Insert /+ Append / into table...

Hi Guys,
if i use /*+ Append */ hint with insert statment then will redologs generate or not?
Thanks

Easy to find out...
SQL> insert /*+ APPEND */ into junk
2 select *
3 from all_objects;
7870 rows created.
Statistics
        504 recursive calls
         91 db block gets
      86173 consistent gets
          6 physical reads
      11824 redo size
        405 bytes sent via SQL*Net to client
        470 bytes received via SQL*Net from client
          4 SQL*Net roundtrips to/from client
          6 sorts (memory)
          0 sorts (disk)
       7870 rows processedOracle will still generate redo, but much less.

Similar Messages

Slow Insert APPEND into Temporary Table

Hello,
We did the following test on Oracle11g 11.1.0.7 database:
create global temporary table test_tab
as select * from tab1 where rownum <= 1;
insert into test_tab select * from tab1 where rownum <= 500000;
commit;
Elapsed time: 00:00:04.56
Statistic
80 recursive calls
26360 db block gets
10606 consistent gets
4729 physical reads
2543400 redo size
399 bytes sent via SQL*Net to client
340 bytes received via SQL*Net from client
6 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
500000 rows processed
truncate table test_tab;
insert /*+ append */ into test_tab select * from tab1 where rownum <= 500000;
commit;
Elapsed time: 00:00:09.35
Statistic
84 recursive calls
4900 db block gets
4738 consistent gets
4698 physical reads
1128 redo size
376 bytes sent via SQL*Net to client
354 bytes received via SQL*Net from client
6 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
500000 rows processed
Note that insert APPEND generates much less redo size: 1128 vs 2543400 . Now the question: why insert APPEND into the temporary table is two times slower than the ordinary insert? Potentially, it should run faster because of lower redo size... Any ideas?

If you run the truncate / insert / truncate / insert append again are the timings the same ?
Wondering if the temp tablespace needed to extend for the first append.

Insert data into table 1 but remove the duplicate data

hello friends,
i m trying to insert data into table tab0 using hints,
query is like this..
INSERT INTO /*+ APPEND PARALLEL(tab0) */ tab NOLOGGING
(select /*+ parallel(tab1)*/
colu1,col2
from tab1 a
where a.rowid =(select max (b.rowid) from tab2 b))
but this query takes too much time around 5 hrs...
bz data almost 40-50 lacs.
i m using
a.rowid =(select max (b.rowid) from tab2 b))....
this is for remove the duplicate data..
but it takes too much time..
so please can u suggest me any ohter option to remove the duplicate data so it
resolved the optimization problem.
thanks in advance.

In the code you posted, you're inserting two columns into the destination table. Are you saying that you are allowed to have duplicates in those two columns but you need to filter out duplicates based on additional columns that are not being inserted?
If you've traced the session, please post your tkprof results.
What does "table makes bulky" mean? You understand that the APPEND hint is forcing the insert to happen above the high water mark of the table, right? And you understand that this prevents the insert from reusing space that has been freed up because of deleted in the table? And that this can substantially increase the cost of full scans on the table. Did you benchmark the INSERT without the APPEND hint?
Justin

Insert data into table from JSP page using Entity Beans(EJB 3.0)

I want to insert data into a database table from JSP page using Entity Beans(EJB 3.0).
1. I have a table 'FRIENDS', (in Oracle 10g database).
2. It has two columns, 'NAME' and 'CITY'. Both have datatype strings(varchar2).
3. Now from a JSP page, having two textfields, 'NAME' and 'CITY', I want to insert data into table 'FRIENDS'.
4. In between JSP and database is a Entity Bean(EJB 3.0) and a stateless session bean.
5. I am using JDev as editor.
Please provide me code ASAP or link with similar example.
Thank you.
Anurag

Hi,
I am also trying that scenario. So u can
Post the jsp form data to a Servlet which will act as a Controller.
In the servlet invoke the business method.
Similar kind of app is in www.roseindia.net
Hope this would help u.
Meanwhile if u get any optimal solution, pls post it.
Thanks,
Happy Java Coding.

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

Inserting image into table

hi,
i m create table, then create procedure, procedure is successfully compile, but when i m trying to insert image into table it error out.
for inserting image i go with
EXECUTE insert_image_file(1,'C:\sunset.jpg');
sunset.jpg is image which i want to insert in table, and which is present on 'c drive'.
when execute the following error are shown
ORA-22285: non-existent directory or file for FILEOPEN operation
ORA-06512: at "SYS.DBMS_LOB", line 635
ORA-06512: at "SCOTT.INSERT_IMAGE_FILE", line 26
ORA-06512: at line 1
how to solve it.
regards
prashant

Prashant wrote:
CREATE OR REPLACE PROCEDURE insert_image_file (p_id NUMBER, p_image_name IN VARCHAR2)
...snipped...Not very nice code... why create an empty image row, then lock it (it is already locked by the uncommitted insert statement), and then update it again? Not very efficient or sensible.
image is on local machine.When a row is created on the server from user input on some PC, who supplied that input? Who read the user's keyboard input on that PC to obtain the values for the columns for the row to create?
Did PL/SQL read the keyboard of that remote PC? Of course not. The client program on that PC read the keyboard input. It then made a client call to the Oracle server. It supplied the data entered via the keyboard by the user to the Oracle server (using a PL/SQL call or using a SQL statement call to Oracle).
Now why would a local image data on that PC be treated any differently than the keyboard data on that PC? How can you expect PL/SQL code running on the Oracle server, to read that image data from the remote PC when the same PL/SQL code is incapable of reading keyboard input from that very same PC?
You need to review your understanding of client-server and how it pertains to using Oracle within client-server architecture.

Please recommend if we have options to read xml file and insert data into table without a temporary table.

Please recommend if we have options to read xml file and insert data into table without a temporary table.

DECLARE @data XML;
SET @data =N'<Root>
<List RecordID="946236" />
<List RecordID="946237" />
<List RecordID="946238" />
<List RecordID="946239" />
<List RecordID="946240" />
</Root>'
INSERT INTO t (id) SELECT T.customer.value('@RecordID', 'INT') AS id
FROM @data.nodes('Root/List')
AS T(customer);
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Large insert op into table with indexes

Hi,
Oracle 8.1.7.0. Empty table (after truncate) with two indexes. Need to insert about 40 billions records. What is better way to complete this task:
1. Drop indexes, insert data then build indexes.
2. Simply insert data into table.
Thanks.

The only way to find out is to test... For example, I did a test on my single-cpu box with Oracle 9i. My test was to load all the rows from DBA_SOURCE (only 650k rows). I found that a single insert statement with bitmap indexes online ran faster than the total elapsed time for taking the indexes offline, inserting, and bringing the indexes back up...
With 40-billion rows, I presume you're using partitioned tables and enabling parrallel DML. Thus, your test will be much different than mine...
In past ETL projects I worked on, I found little difference in timing. I decided that I didn't want to drop indexes (it was ver8i) so I loaded the empty tables with indexes (and constraints) enabled...
Stan

Insert Data into Table from TXT or CSV file !!!!!

Dear All,
Recently I have started working on APEX. In Oracle Forms, we used to use TEXT_IO for inserting records into tables from txt files. Now I want to do the same thing in apex 3.2. How can I insert data into tables from txt of csv files.
Waiting of your valuable suggestions.
With kind regards,
Yousuf.

Yousuf
wwv_flow_files is used by APEX to hold uploaded files.
If you incorporate a file browse item on you page, browse for the selected file, then submit the page (having the PL/SQL process described as an on suibmit process) then what I detailed should work.
If you don't need users to have access to this then just go to Home>Utilities>Data Load/Unload in APEX and there is a handy load utility there that does it all for you.
Cheers
Ben

Data from table in xml Format and Inserting it into Table

Hi All
I have table where xml data is stored in long format with xml tag know i have read the entire xml xoulmn which is xml tag and insert it into diffrent table can any suggest me the code
Thanks & Regards

I believe you are on the wrong forum. You want the XML DB forum.
See:
XML DB

How do you access a web service to insert data into table?

Ok I have a simple html/jsp survey form to host on our web site. Because of firewall issues I cannot do a direct connect to the database and insert the data from the form. So I need to take the data from the survey form, and pass it to an existing web service, or create a web service that will insert this information for me into the database table?
Thanks again.
orozco

Thanks for the reply shanu. Well, because of firewall issues, as a work around we use a web service to insert data into the database table. Since the Web Service already exist, we just thought it would be easy enough just to pass the parameters to it, and have it do the insert. So really all I need is just to communicate with the already existing web service. I will be honest though I have not really worked with web services before.
orozcom

Inserting records into Table with check table logic in place

I want to insert records into a table, and have the check table to not allow invalid entries. Is there a function out there that will allow this? I am currently using the insert statement and it is working except that it is not giving an error when the value does not exist in the check table for the particular fields.
INSERT INTO ZSD_XREF VALUES WA_XREF.
That is the basic statement I'm using ZSD_XREF has several fields one being the material number field tied to the check table which happens to be MAKT file. The insert statement is not validating the material numbers using the check table, or at least it is not giving an error. Any ideas?

Paul,
Unfortunately, open SQL statements such as INSERT, UPDATE do not go through the check table logic as they directly hit the database layer. Check table checks are performed only if you go through application layer that is when you enter the same data through a screen.
You have to do the checks yourself.
Happy checking!!!
Srinivas

Insert data into table

When I try to insert data into the table, I get the error message:
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]The name 'uniqueID' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.
What is wrong in the following code?
String uniqueID, GenericType;
float elevation, CalcTotalHeight, CalcTotalArea, CalcTotalVolume;
stmt.executeUpdate(
"INSERT INTO IFCData VALUES (uniqueID, GenericType, elevation, CalcTotalHeight, CalcTotalArea, CalcTotalVolume)" );

No, sorry, now that I look at it for more than five seconds, your SQL is wrong.
You don't have a list of columns that you are updating; I'm not sure whether this is bad SQL or whether the database will assume you meant to update all the columns in their declared order. But more to the point, the "values" you are assigning to those columns are not what you want. For example, the value you assign to the first column is uniqueid, meaning either the column named uniqueid or some SQL constant named uniqueid. There isn't any such thing, hence the message.
I suppose you wanted to put the value of the Java variable "uniqueid" there. Of course the database and the JDBC driver don't know anything about the names of variables in your code, so they can't replace the string "uniqueid" by the value of the variable. The way to do that is to use a prepared statement, like this:PreparedStatement ps = conn.prepareStatement("INSERT INTO IFCData VALUES (?, ?, ?, ?, ?, ?)");
// fix this SQL so you name the columns you are inserting into as well
ps.setString(1, uniqueID);
ps.setString(2, GenericType);
ps.setFloat(3, elevation);
// and so on
ps.executeUpdate();PC²

Error While Inserting Data into table using OAF

Hi Experts,
I am learning OAF; i am trying into insert the data into table using OAF. I followed the below procedure.
My table(OLF_TEST_TBL) Columns:
EmpID (Number), Ename(VARCHAR2 100), Sal Number, and who columns.
1. created Application Module (AM).
package: oracle.apps.mfg.simplepg.server
name: oaf_test_tbl_am
2. created simple page
name:EmployeePG
package:oracle.apps.mfg.simplepg.webui
3. Assigned the Application Module to Page
4. Created Entity Object(EO)
name:oaf_test_tbl_eo
package:oracle.apps.mfg.simplepg.schema.server
schema:apps
table:OLF_TEST_TBL
note:
1. EMPID column is selected as primary key
2. selected create method, remove method and validation method.
3.checked generate default view object
VO:
name:olf_test_tbl_vo
note: Entity Object was assigned to VO
Coming To page:
page main region:EmployeeMainRN
1.under main region i created one more region using wizard
selected AM and VO, region style-default single column
2. under main region i created one more region
region style- pagebuttonbar, ID:pagebutoonsRN
3. under pagebuttonRN, created two submit buttons(ID:SUBMIT, ID:CANCEL).
In AM java page:
created a method to insert row and for commit.
Insert Method:
public void insertrow(){
OAViewObject vo=(OAViewObject)getoaf_test_tbl_vo1();
if(!vo.isPreparedForExecution()){
vo.executeQuery();
Row row=vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Commit Method:
public void savaDataTooaftesttable(){
getDBTransaction().commit();
In EmployeeMainRN, created a controller.
In this controller process request method, 'insertrow' method was called.
import oracle.apps.fnd.framework.OAApplicationModule;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("insertrow");
To commit the transaction when SUBMIT button pressed, commit method was called in process form request method.
import oracle.apps.fnd.framework.OAViewObject;
public void processformRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("SUBMIT") != null)
am.invokemethod("savaDataTooaftesttable");
Error After clicking the submit button_
I ran the page, page was opened successfully. Once i enter data and click submit button, it's giving the following error.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object oaf_test_tbl_am.oaf_test_tbl_vo1700_oaf_test_tbl_vo1_practice_test_prc1_oracle_apps_mfg_simplepg_server_oaf_test_tbl_am.oaf_test_tbl_vo1 contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
Experts, Kindly help me why i am getting this error.
Awating your replies.
Thanks in advance.

If you dont want to create message. You can throw exception like below as well
throw new OAException("Emp Id is "+empId+" and employee name is "+empName, OAException.CONFIRMATION);Thanks
--Anil

Inserting text into table cells in Powerpoint

Hi
I have a named table ClientInfo on Slide 3 in Powerpoint. How can I programmatically insert text into the table's cells?
Thanks
Regards

Hi Yahya,
What did you mean named table? Did you mean the name of shape?
If I understood correctly, we can use table object to manipulate a table shape on a slide. And here is a sample to insert text into the first cell for your reference:
Application.ActivePresentation.Slides(3).Shapes("ClientInfo").Table.Cell(1, 1).Shape.TextFrame.TextRange.Text = "Hello"
Also here are some helpful links for learning PowerPoint developing:
How do I... (PowerPoint 2013 developer reference)
Object model reference (PowerPoint 2013 developer reference)
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Insert /*+ Append */ into table...

Similar Messages

Maybe you are looking for

Insert /+ Append / into table...