Insert items from two different Multiple Select Lists into a single table

I need help. I have a training tracking system that tracks the courses taken by employees.
I have created two multiple select lists, one is SelectEmployees and the other is SelectCourses. I want to insert
the selected item from those two multiple select lists into Training_Record table.
Note, SelectEmployees" is from Employee table and SelectCourses is from Courses table. Those two table has no intersetion.
Train_Record is the table that joins those two together.
Please advice and your help is appreciate.

Thank you for your help.
I tried your code and changed the table/field name to my actual table/field name and the iitem name to actual item name.
declare
cursor c_Employees is
select PERSONNEL_NEW.EMPLOYEEID from PERSONNEL_NEW where PERSONNEL_NEW.EMPLOYEEID in (:P15_SELECTEDEMP);
cursor c_Courses is
select COURSES.COURSE_ID from COURSES where COURSES.COURSE_ID in
(:P15_SELECTEDCOUR);
begin
foreach :=r_employee in c_Employees loop
foreach :=r_course in c_Courses loop
insert
into COPYOFTRAINREC ( EMPLOYEEID, COURSEID )
values ( r_employee.EMPLOYEEID, r_course.COURSE_ID );
end loop;
end loop;
end;
I got error message as :
ORA-06550: line 12, column 25: PLS-00103: Encountered the symbol "C_EMPLOYEES" when expecting one of the following: (
Error
OK

Similar Messages

  • Create a collection from Shuttle or Multiple Select List items

    Hi all, this may be a dumb question, but I cannot find how to create a collection using the values stored shuttle item? I just want to assign the values of the shuttle which are usually delimited by a colon (ex. 11:22:33:44:55) into a collection that stores each of these values separately so later I can select * from table where id IN(select * from collectionname) --- is this possible?
    I am running into a problem where users want to select more than 1000 items in a shuttle to do a search.... and the IN operator cannot handle more than 1000 instances. I was told to try to use a temporary table to house the values of the shuttle, but temporary tables pose a problem with APEX. I read on the forums to try using a collection instead. Any thoughts?
    Thanks.

    Would this be a good start?? I found this here... Re: Search on a typed in list of values
    Not sure how the View would work though??
    A much easier way of doing all this is to create a collection, create a view off that collection and then do your select from the view. No custom functions or types involved. An example is:
    DECLARE
    l_vc_arr2 HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
    BEGIN
    l_vc_arr2 := HTMLDB_UTIL.STRING_TO_TABLE(:P13_MULTISELECT);
    htmldb_collection.create_or_truncate_collection( p_collection_name => 'MULTISELECTCOL');
    FOR i IN 1..l_vc_arr2.count LOOP
    htmldb_collection.add_member(
    p_collection_name => 'MULTISELECTCOL',
    p_c001 => l_vc_arr2(i));
    END LOOP;
    END;
    where your view looks something like:
    CREATE OR REPLACE FORCE VIEW "WS"."TEMP_MULTISELECT_VIEW" ("MULTISELECTID") AS
    (SELECT c001 FROM htmldb_collections WHERE collection_name = 'MULTISELECTCOL');
    and finally for your report you use something like:
    SELECT t.a
    FROM tablea t
    WHERE t.b IN
    (SELECT roleid FROM temp_multiselect_view)
    This way is simple and works... so by KISS standards its good.
    Hope this helps some other unfortunate....

  • How to upload the data from two sheets in one excel into SAP

    Hi experts,
                    My requirement is to upload the data from two sheets in an excel into an internal table.How can this be achieved.Is some OLE application has to be used?
    Thanks
    Abhishek

    Hi
    see this program will upload excel file to application.
    *& Report  ZSD_EXCEL2
    REPORT  ZSD_EXCEL2.
    types: begin of ttab ,
          fld1(30) type c,
          fld2(30) type c,
          fld3(30) type c,
          fld4(30) type c,
          fld5(30) type c,
          end of ttab.
    data: itab type table of ttab with header line.
    selection-screen skip 1.
    parameters: p_file type localfile default
                'C:\test.xls'.
    selection-screen skip 1.
    at selection-screen on value-request for p_file.
      call function 'KD_GET_FILENAME_ON_F4'
           exporting
                static    = 'X'
           changing
                file_name = p_file.
    start-of-selection.
      clear itab. refresh itab.
      perform upload_data.
      loop at itab.
        write:/ itab-fld1, itab-fld2, itab-fld3, itab-fld4, itab-fld5.
      endloop.
    * Upload_Data
    form upload_data.
      data: file type  rlgrap-filename.
      data: xcel type table of alsmex_tabline with header line.
      file = p_file.
      call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
           exporting
                filename                = file
                i_begin_col             = '1'
                i_begin_row             = '1'
                i_end_col               = '200'
                i_end_row               = '5000'
           tables
                intern                  = xcel
           exceptions
                inconsistent_parameters = 1
                upload_ole              = 2
                others                  = 3.
      loop at xcel.
        case xcel-col.
          when '0001'.
            itab-fld1 = xcel-value.
          when '0002'.
            itab-fld2 = xcel-value.
          when '0003'.
            itab-fld3 = xcel-value.
          when '0004'.
            itab-fld4 = xcel-value.
          when '0005'.
            itab-fld5 = xcel-value.
        endcase.
        at end of row.
          append itab.
          clear itab.
        endat.
      endloop.
    endform.

  • Help needed -- Considerations to be taken while migrating 2 different SCCM 2007 hierarchies into a single SCCM 2012 Hierarchy.

    Hi, I need your help on consolidating two different SCCM 2007 infrastructures into a single SCCM 2012.
    We have two different SCCM 2007 Hierarchies, Lets say 123 and ABC
    About 123 SCCM 2007 -- On 123 Hierarchy, we have already started migrating clients from SCCM 2007 to SCCM 2012.
    About ABC SCCM 2007 -- On ABC Hierarchy, This is still running on SCCM 2007 (This hierarchy only be started migrating once                                      we
    are completed migration on 123)
    Out of which, we have few co located offices across the globe for both 123 and ABC. Now we are decided to replace the hardware on all these locations by removing the existing two servers (one for 123 and other for ABC,with two different Forest and domains),
    and consolidate them into a single server.how can we plan/design to ensure that we covering both hierarchies SCCM clients for the operations.
    ===================Below are some possibilities we are discussing on================================
    1.Is there any way on "System management" in AD to enable access either in 123's domain or ABC's domain.
    2.Since we are planning to replace the hardware with Server 2012 R2 with Hyper-V, Create two instances and migrate 123 hierarchy to SCCM 2012 and other instance will serve ABC until we start the migration on this.
    ========================================================================================
    correct me, If i am in wrong direction. Please suggest me the best of doing it. Thanks in advance.
    srkr

    1) In CM 2012 you can publish data to System Management in other forest but you have to configure the permissions manually and create the forest object in the ConfigMgr console.
    2) CM07 and CM2012 instances can co-exist as long as you don't create boundary groups in CM12 for site assignment (that will cause overlapping boundaries if you still have boundaries in Cm07)
    Kent Agerlund | My blogs: blog.coretech.dk and
    SCUG.DK | Twitter: @Agerlund | Linkedin:
    Kent Agerlund

  • Inserting multiple rows into a table using a multiple-select list

    I'm trying to figure out how to take the output of a multiple-select list (":" separated list of values) and use that to update a table by inserting multiple rows based on the values. Is there a straight-forward way to do that in APEX?
    Thanks.
    Chris

    Hi Chris,
    I think this should give you what you need: Working with a Multiple Select List Item
    --Jennifer                                                                                                                                                                                                                                                                                                                                                                                                   

  • Possible solution to avoid deadlock when two inserts happen on same table from two different machines.

    Possible solution to avoid deadlock when two inserts happen on same table from two different machines.
    Below are the details from deadlock trace.
    Deadlock encountered .... Printing deadlock information
    Wait-for graph
    NULL
    Node:1
    KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
    Grant List 2:
    Owner:0x00000013F494A980 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:376 ECID:0 XactLockInfo: 0x000000055014F400
    SPID: 376 ECID: 0 Statement Type: INSERT Line #: 70
    Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
    Requested by:
    ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
    NULL
    Node:2
    KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
    Grant List 2:
    Owner:0x0000000B3486A780 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:238 ECID:0 XactLockInfo: 0x0000002AA53383F0
    SPID: 238 ECID: 0 Statement Type: INSERT Line #: 70
    Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
    Requested by:
    ResType:LockOwner Stype:'OR'Xdes:0x000000055014F3C0 Mode: RangeI-N SPID:376 BatchID:0 ECID:0 TaskProxy:(0x000000080426E538) Value:0x30614e80 Cost:(0/41748)
    NULL
    Victim Resource Owner:
    ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
    deadlock-list
    deadlock victim=process5daddc8
    process-list
    process id=process5daddc8 taskpriority=0 logused=38828 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994026815 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.347 XDES=0x2aa53383b0 lockMode=RangeI-N schedulerid=43 kpid=14156 status=suspended spid=238 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.463 lastbatchcompleted=2014-07-25T12:46:57.463 clientapp=pa hostname=pa02 hostpid=1596 loginname=myuser isolationlevel=serializable (4) xactid=2994026815 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
    executionStack
    frame procname=mydb.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
    INSERT INTO [dbo].[Prod1] .....
    inputbuf
    Proc [Database Id = 8 Object Id = 89923542]
    process id=process5d84988 taskpriority=0 logused=41748 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994024748 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.320 XDES=0x55014f3c0 lockMode=RangeI-N schedulerid=39 kpid=14292 status=suspended spid=376 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.440 lastbatchcompleted=2014-07-25T12:46:57.440 clientapp=pa hostname=pa01 hostpid=1548 loginname=myuser isolationlevel=serializable (4) xactid=2994024748 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
    executionStack
    frame procname=pa.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
    INSERT INTO [dbo].[Prod1]....
    inputbuf
    Proc [Database Id = 8 Object Id = 89923542]
    resource-list
    keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
    owner-list
    owner id=process5d84988 mode=RangeS-S
    waiter-list
    waiter id=process5daddc8 mode=RangeI-N requestType=convert
    keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
    owner-list
    owner id=process5daddc8 mode=RangeS-S
    waiter-list
    waiter id=process5d84988 mode=RangeI-N requestType=convert

    Don't know. Perhaps these can help. I scanned the second link but didn't see much about Ending Deadlocks. I'd say the Fourth link probably has better information than the first three links. But maybe read them all just in case the Fourth is missing something
    one of the first three have.
    Deadlocking
    Detecting and Ending Deadlocks
    Minimizing Deadlocks
    Handling Deadlocks in SQL Server
    Google search for "SQL Deadlock"
    La vida loca

  • Set focus on item that selected in multiple-selection list box field in infopath

    Hi
    I have  multiple-selection list box field in infopath that have for example 40 items. (I customize sharepoint list with infopath),then
     publish infopath form in to sharepoint list. users want to add new item,when they selected or checked each item in multiple selection list box, after that automatically control focus on first item, but I want to focus remain on that item
    I was selected. Why this happen?! I also set postback settings to “never” in multiple-selection list box properties. But didn’t work.
    Thanks.

    Hi,
    According to your post, my understanding is that you wanted  to find several columns based on user selection of checkboxes in one of the Multiple-selection List Box.
    I recommend to customize the form to concatenate values from choice field (with multiple values) into single line text box, and then hide the fields based on the text box value.
    We can follow the steps as following:
    Add a text box control(filed 3) on the form to hold the value selection in the multiple selection list box.
    Set the default value for the text box control as
    substring-after(eval(eval(Value, 'concat(., ";")'), ".."), ";")
    (you need to change the ‘Value’ in the formula to your multiple selection list box name: filed1).
    Add the conditional formatting on the flied: flied 3 does not contain value (you need to change the ‘Value’ in the formula to your multiple selection list box value.).
    In addition, you can add Formatting action to hide the text box control.
    Here are the result screenshots for you to take a look at:
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How can i display Value in Report which i select from Multiple select list

    Dear All,
    i am using multiple select List in form with report page.
    When i create new Entry with select Multiple value in Multiple Select List then in report Value display me in below format
    my SQL Query are
    select NAME D, CODE R from  COUNTRY_MAS WHERE ACTIVE_FLG ='Y' order by NAME
    AS:AI:AG:AM these are return value .i want to display NAME in report .
    How can i do this ?
    Thanks
    Edited by: Vedant on Apr 25, 2012 11:14 PM

    Short answer, use the apex_util.string_to_table to convert to a table; then you can either iterate through the table to generate a string of names, or accomplish the same with a bulk operation.
    http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDFEEJD
    Encapsulate all this within a pl/sql function.

  • Selecting data from two different tables.

    Do we need to use join two tables with primary/foreign key while trying to use select statement for getting data from those to table.? If no who can i go about do it.

    872959 wrote:
    If i am using From clause to get data from two different tables, is it necessary that both tables have column of identical data in them.In general, they ought to (or you need to join in a third table that tells you how to map rows from one table to rows of the other table).
    It is not strictly necessary that there be any join condition between tables. If you don't provide a join condition, Oracle has to do a Cartesian product. That means that if there are n rows in one table and m rows in the other, the result set will have n * m rows. It is very rarely a good idea to write queries that do Cartesian products but it does occasionally happen.
    Justin

  • Checked some items of multiple-selection list box when form loaded in infopath

    Hi
    I customize sharepoint list with infopath. I have multiple-selection list box and want to checked some items of that automatically when form loaded. how can do this?
    Thanks.

    Hi,
    According to your description, my understanding is that you want to pre-select some items in the Multiple-Selection List Box.
    I recommend to follow the steps below to achieve this goal:
    Click Default Values under Data tab in InfoPath, expand the dataFields and navigate to the Multiple-Selection List Box field.
    Set the Default Value of the Multiple-Selection List Box field.
    Right click the field under the Multiple-Selection List Box group, then select Add another Value Below and set the Default Value for this field.
    Repeat step3 based on the number of the items that you want to be pre-selected.
    More information are provided in the link below:
    http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Change from 4.5 to 5,1 with multiple select list boxes

    Had a multiple select list box which worked fine in 4.5 i.e
              a comma seperated list would be passed to the corresponding set method
              in the bean. We switch to 5.1 and this no longer works any one know of
              the solution or a work around to the problem
              Hugh McBride
              [email protected]
              

    Vladimir,
              I am using a JSP/Java Beans design where the name of the
              set
              method in the bean match the name of the ui component so when the form
              is submitted the method in the bean is automatically called. The method
              request is a workaround but one we wanted to avoid using
              Thanks
              Hugh McBride
              [email protected]
              Vladimir Andral wrote:
              > How are you getting the values? request.getParameter()?
              >
              > You should be using request.getParameterValues() if the parameter
              > has more than one value.
              >
              > Check out the documentation for the HttpServletRequest interface.
              >
              > --
              > Vlad
              >
              > Hugh McBride wrote in message <[email protected]>...
              > >Had a multiple select list box which worked fine in 4.5 i.e
              > >a comma seperated list would be passed to the corresponding set method
              > >in the bean. We switch to 5.1 and this no longer works any one know of
              > >the solution or a work around to the problem
              > >
              > >
              > >Hugh McBride
              > >[email protected]
              > >
              

  • Setting current values in Multiple Select List in SQL Query based Report

    Hi,
    I have a report based on a sql query that contains a multiple select list. Unfortunately I cannot get the multiple select list to display the current values (p_value) correctly. I have created a page item, :p311_current_versions, that is set using a pre-header process and it returns a value with a colon delimited format e.g. '10.1.2.1.0:10.1.2.2.0'. Then this item is used in the sql query to set the current value (p_value) of the apex_item.select_list_from_query function. However when the table is displayed, instead of having two entries, 10.1.2.1.0 and 10.1.2.2.0 selected, it has an extra entry '10.1.2.1.0:10.1.2.2.0' selected.
    Here is my code:
    select distinct a.product, a.version from (
    select distinct
    apex_item.display_and_save(2,product)||apex_item.hidden(1,env_product_id) PRODUCT,
    APEX_ITEM.SELECT_LIST_FROM_QUERY(3,decode(product, 'HTTP Server' , :p311_current_versions, version), 'SELECT distinct version d, version r FROM ebs_tech_stack where
    product ='''||PRODUCT||'''',
    decode(PRODUCT, 'HTTP Server' ,'multiple="multiple" style="width:170px"','style="width:170px"'),
    'NO') as version
    from ebs_environment_tech_stack
    where environment_id = :p311_umgebung_id) a order by a.product
    If anyone can help me figure out how to set the current values correctly I'd be really grateful!!
    Thanks in advance,
    Jean

    Jean,
    I don't think this is possible using the apex_item package. The select_list_from_query function accepts only a single value for the second parameter.
    Scott

  • How to submit a multiple-selection list box in an Infopath Sharepoint form as multiple entries on a Sharepoint list?

    I would like to be able to submit an Infopath form with a multiple selection list box in Sharepoint as multiple entries on a Sharepoint list.
    For example, a user has to complete the following fields:
    First Name:
    Last Name:
    Favorite Color (can select more than one):
    [] Blue
    [] Red
    [] Yellow
    [] Green
    If the user picks blue AND red and submits the form, the Sharepoint list would feature TWO entries, both with their first and last names, but with different colors in the "Favorite Color" column.
    Please let me know if there is a way to do this. Any guidance would be helpful!

    Hi redhotc,
    According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
    I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
    was fine.Please have a try as the below link:
    http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
    Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
    http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Select MULTIPLE default values for a multiple selection list box based on another field in Infopath 2010

    Hello there - Before I explain my issue, I would like to point out that I have reviewed some other discussions on selecting default values for multiple selection listbox. But my issue is specific and different, and not answered by any of the discussions
    I visited.
    I have a multiple selection list box (say for example all countries in the world as values), and I would like to pre-select or setup multiple default values (say five countries) based on some criteria that I query from MS SQL database table.
    I know we can go to Data | Default Values option to setup one or many default values for multiple selection list box. When I enter the default values manually this works. I also right click the field under the Multiple-Selection List Box group, then select
    Add another Value Below and set the Default Value for this field to setup multiple default values.
    However, if I reference a field (either an infopath field or a field from SQL database) I am not able to setup multiple default values. Infopath automatically selects the last field I selected for all instances and in the end I am able to see only one
    default value selected instead of many. How to fix this problem? Why would infopath allow multiple default values when we enter it manually but not when we reference some fields?
    Please let me know if you need more info. Appreciate your help.
    Thanks!

    Hi redhotc,
    According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
    I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
    was fine.Please have a try as the below link:
    http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
    Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
    http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to create Analysis from two different subject areas with diff models

    Hello,
    I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
    First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
    Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
    I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
    whether it is possible to do in OBIEE?
    Please help me
    Kind regard
    robix

    Hi
    One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
    But if you indeed interested in UNION (or intersect) queries, then do this:
    Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
    Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
    Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
    Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
    That should give you a start.
    http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
    http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
    Award Points it is useful.
    Thanks
    satya

Maybe you are looking for