Inserting XML data into and XML template

I have XML data structured according to a schema. I also have a
template structured with the same schema, plus a schema for document formatting. I want to merge the XML data into the Template to produce an output file.
I know I can write a program to use XPath or DOM, but I am sure a generic solution already exists for this. I did not have any luck with google.
Suggestions?
thanks
d1

Similar Messages

Xml data into non-xml database.. solution anyone?

Hi,
My current project requires me to store the client's data on our servers. We're using Oracle9i. Daily, I will download the client's data for that day and load it into our database. My problem is that the data file is not a flat file so I can't use sql*loader to load the data. Instead, the data file is an xml file. What is the best way to load xml data into a non-xml database? Are there any tools similar to sql*Loader that will load xml data into non-xml database? Is it the best solution for the client to give me an XML dump of their data to load into our database, or should I request a flat file? My last resort would be to write some sort of a script to parse the xml data into a flat file, and then run it through sql*loader. Is this the best solution? One thing to note is that these files could be very large.
Thanks in advance.
-PV

I assume that just putting the XML file into an
extremely large VARCHAR field is not what you want.
Instead, you want to extract data elements from the
XML and write them to columns in a table in your
database. Right?Yes. Your assumption is correct.
It sounds like you already have a script that loads a
flat file into your database. In that case I would
write an XSL transformation that converts the client's
XML into a correctly-formatted flat file.Thank you. I'll look into that. Other suggestions are welcome.

How to encrypt/decrypt xml data into, and then out of IDS?

Hi,
How would we encrypt NPPI information being passed from an unencrypted xml through IDS, and then decrypt it on exit prior to Gendata.
The IDS SDK gave a reference to IDSEncryptionRule(), but insufficient examples of implementation.
It could be something like a single tag element, or even the entire xml, it's just not clear how to make it happen using native IDS methods.
Any thoughts or help to implement this security measure would be most welcome!
Thanks so much!
Edited by: lodit on Apr 10, 2013 2:56 PM

Hi there,
You would need to write a custom IDS rule that implements this function. You can refer to the IDS SDK book for info on writing a custom rule. IDSEncryptionRule does operations based on the request state received. Normally when an IDS rule is executed, the rules in the request type definition are executed with the RUN_FORWARD request state. Then they are executed with the RUN_REVERSE request state. An example of why this model is used would be the ATCReceiveFile. On RUN_FOWARD, it writes the contents of file segments in a message to a temporary file. Subsequent rules execute. Then on the RUN_REVERSE, the ATCReceiveFile does clean up routines to remove the temporary file.
So, armed with that knowledge, you can use the IDSEncryptionrule to perform on RUN_FORWARD (decrypt message variables for subsequent processing by Documaker) and then on RUN_REVERSE (encrypt message variables to send back to the client).
It should be apparent at this point that you need to use an encryption/decryption mechanism with the IDS client otherwise you won't be able to prepare the message to send or read the response. On the client side there are functions - consult the examples included in the IDS SDK (DSI_DSK in the installer package).
--Andy

XML data connection and XML submit button

Hi Guys,
another one that 'should' be straight forward. I have an xml data connection that is used ot pull in event details (name, location, cost etc) that allows you to select various events, then fill in your contact details and then submit the form. I need to have the form submit with the data that the user entered into the form as well as their selection of event. When I set up the email submit button, the XML file attached to the email is actually the XML file that the form pulls the event details from not the data that the user has entered into the form. Again I reckon this one should be straight forwad to fix, seems like a fairly normal way to operate, but I just cant find a solution. please help

>We are letting user know that u have thrown email to someone and we also let user know how is going to contact them.
This is good, but you cannot stop the email from opening and the user
needing to send it. This is, as I said, fundamental to security and
cannot be switched off.
>I tried using HTTP request but it still opening email option to send mail.
This suggests you did not do it right, because when you use http, no
mail is sent locally. Can you describe what you do?
>
>I want to do the way we do in the html page using javascript to set action event at click event and send data to specified email id.
HTML cannot silently send an email either.
Perhaps you could outline what sort of HTML JavaScript you use, so
that we can suggest an equivalent if there is one.
Aandi Inston

Binary data into a XML

Hello,
I'd like to know how I could insert binary data into a XML message, for example, an image.
Does XML Java API support binary data insertion into a XML message? Or should I make my own classes to do this?
As I've read in the next url http://www.javaworld.com/javaworld/javatips/jw-javatip117.html ,
the best approach is to use a Base-64 encoding. The encoding algorithm processes a byte stream in 3-byte sequences. Each 3-byte sequence parcels into four 6-bit data units. Each 6-bit data unit then encodes into the character stream as the corresponding character from the character set: A-Z, a-z, 0-9, +, and /.
Thanks

Does XML Java API support binary data insertion into a
XML message? Or should I make my own classes to do
this?The XML Java API's support producing well-formed XML according to the XML specifications. Those specifications do not say (or even suggest) how you should encode binary data to put it into XML. If you want to encode your binary data in some way then you are free to do so, but you'll have to write your own code.

Insert XML Data Into An Existing PDF Form

I am working on an application, written with XHTML and JavaScript, and running on AIR, so it is a desktop application.
Users enter data into an XHTML form and upon submission I create an XML file of the data using JavaScript.
At any later time users will be able to open the XML file from the application. I will use JavaScript, again, to read the XML and fill in an XHTML form. But at this point I will provide a button for users to generate a PDF with the data. I would then like to insert the XML data into the appropriate fields of the existing PDF form. I would like to continue to do this from within the AIR application using JavaScript.
Is this possible?
What version of Acrobat would I need as the developer? Professional or Standard or Other or None?
What version of Acrobat would the end users need? Professional or Standard or Other or None?
Can this all be done using only JavaScript and the Acrobat SDK? Does using AIR offer any help (all Adobe products)?
When the end user clicks the generate PDF button would Acrobat have to open? Can this be done without the user seeing Acrobat open? Either way is ok, I would just like the user to see an alert saying that the file has be generated and point them to its location on the local machine. But again, this is not a requirement.
Thanks in advance.
Not asking for source code here, just if its possible. :)
I'll figure out the how.

You have two choices
1) You can use JavaScript in your AIR application to communicate with the JavaScript in the PDF to fill in the form directly. This can all be done inside of your AIR app. This is certainly the best route to go and there is (IIRC) a sample in the AIR SDK.
2) You can create an XFDF file from your XML data and then have Acrobat/Reader open the XFDF file to fill in the data.
Both methods will work with Acrobat and Reader - HOWEVER, Reader users won't be able to save the PDF unless it has been Reader Enabled.
Leonard

INSERTION OF XML DATA INTO THE TABLE USING XMLDOM

hello,
i am using XMLDOM to insert the data into the table
i am using different function of it.
but i am facing the problem to retrive the the multiple entry.
like in my example i have two entry of the ' po number '
& i am using the function
dbms_xmldom.item(l_nodelist, 0)
i which i have to pass index no.
& through this i am getting only single entry according to the index no.
Example on which i am working is
declare
l_xml_data CLOB;
l_xml_doc dbms_xmldom.domdocument;
l_nodelist dbms_xmldom.DOMNodeList;
l_node dbms_xmldom.domnode;
l_xmltype XMLTYPE;
l_po_num VARCHAR2(30);
l_cust_ord VARCHAR2(30);
l_item_code VARCHAR2(30);
begin
l_xml_data := '<?xml version="1.0" encoding="UTF-8"?>

<MobileInventoryResponse>
 <message>
 <message-header>
 <message-id>16244182</message-id>
 <transaction-name>ship-advice</transaction-name>
 <partner-name>cbeyond</partner-name>
 <source-url>http://www.brightpoint.com</source-url>
 <create-timestamp>20080826150709</create-timestamp>
 <response-request>1</response-request>
 </message-header>
 <ship-advice>
 <header>
 <customer-id>297859</customer-id>
 <shipment-information>
 <ship-first-name>RA_13Aug_1</ship-first-name>
 <ship-last-name>MIND</ship-last-name>
 <ship-address1>test</ship-address1>
 <ship-city>test</ship-city>
 <ship-state>VA</ship-state>
 <ship-post-code>22102-4931</ship-post-code>
 <ship-country-code>US</ship-country-code>
<ship-phone1>0040726335068</ship-phone1>
<ship-email>[email protected]</ship-email>
<ship-via>FX01</ship-via>
<ship-request-date>20080826</ship-request-date>
<ship-request-warehouse>CBY1</ship-request-warehouse>
</shipment-information>
<purchase-order-information>
<purchase-order-number>380928</purchase-order-number>
<purchase-order-number>380929</purchase-order-number> ----modi by Ananda Dubey
<account-description/>
<purchase-order-amount>0.0</purchase-order-amount>
<currency-code>USD</currency-code>
</purchase-order-information>
<order-header>
<customer-order-number>0002759</customer-order-number>
<customer-order-date>20080826</customer-order-date>
<order-sub-total>19.0</order-sub-total>
<order-discount>0.0</order-discount>
<order-tax1>0.0</order-tax1>
<order-tax2>0.0</order-tax2>
<order-tax3>0.0</order-tax3>
<order-shipment-charge>18.0</order-shipment-charge>
<order-total-net>0.0</order-total-net>
<order-status>Completed</order-status>
<order-type/>
<brightpoint-order-number>35028788</brightpoint-order-number>
<warehouse-id>CBY1</warehouse-id>
<ship-date>20080826</ship-date>
</order-header>
</header>
<detail>
<line-item>
<line-no>1</line-no>
<item-code>SKU1</item-code>
<universal-product-code>0</universal-product-code>
<ship-quantity>1.0</ship-quantity>
<unit-of-measure>EA</unit-of-measure>
<serial-list>
<serial-numbers>
<esn>TIMI000013</esn>
</serial-numbers>
</serial-list>
<line-status/>
<base-price>0.0</base-price>
<line-discount>0.0</line-discount>
<line-tax1>0.0</line-tax1>
<line-tax2>0.0</line-tax2>
<line-tax3>0.0</line-tax3>
<bill-of-lading>929406733828</bill-of-lading>
<scac>FX01</scac>
</line-item>
</detail>
</ship-advice>
<transactionInfo>
 <eventID>16244182</eventID>
 </transactionInfo>
 </message>
</MobileInventoryResponse>';
l_xml_doc := dbms_xmldom.newDomDocument(l_xml_data);
-- Method 1 to get data
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_po_num := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_po_num);
l_nodelist := dbms_xslprocessor.selectnodes(dbms_xmldom.makenode(l_xml_doc),
'/MobileInventoryResponse/message/ship-advice/detail/line-item/item-code');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_item_code := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_item_code);
l_xmltype := XMLTYPE(l_xml_data);
l_cust_ord := l_xmltype.extract('/MobileInventoryResponse/message/ship-advice/header/order-header/customer-order-number/text()').getStringVal();
dbms_output.put_line(l_cust_ord);
dbms_xmldom.freeDocument(l_xml_doc);
end;
/

In the following code
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from listYou need to understand what the second parm on the .item call does. See [dbms_xmldom.item|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_xmldom.htm#i1126138]
The nodelist is a 0 based array of information and you are only requesting to pull the node info in the first array position. So to get the info in the second array position, you need to use ", 1)". You can also use .getLength and a loop to parse through everything in the node list.

What is the best and easiest way to get xml data into the rtf document

Hello Frenz
I'm using rtf document(with bi publisher desktop plug in installed in the word document)... please suggest me the best way(to get the xml data from tables) to load the xml data into this rtf document..
I'm not developing oracle apps reports. It is for Oracle retail...
another doubt is... in the rtf document itself there is oracle bi publisher.. can it be used for generating xml data...
please bear with me and suggest me a way out
Thanks and regards

What will you be using in your production system to generate XML? Or are you just trying out BIP?
If you're familiar with dbms_xmlquery.getxml , you can pass your SQL to generate the XML output. Save the output in a file and use it in your RTF template.
If you have Oracle reports, you can create XML output when you run the report.

Inserting large xml data into xmltype

Hi all,
In my project I need to insert very large XML data into xmltype column.
My table:
CREATE TABLE TransDetailstblCLOB ( id number, data_xml XMLType) XmlType data_xml STORE AS CLOB;
I am using JDBC approach to insert values. It works fine for data less than 4000 bytes when using preparedStatement.setString(1, xmlData). As I have to insert large Xml data >4000 bytes I am now using preparedStatement.setClob() methods.
My code works fine for table which has column declared as CLOB expicitly. But for TransDetailstblCLOB where the column is declared as XMLTYPE and storage option as CLOB I am getting the error : "ORA-01461: can bind a LONG value only for insert into a LONG column".
This error means that there is a mismatch between my setClob() and column. which means am I not storing in CLOB column.
I read in Oracle site that
When you create an XMLType column without any XML schema specification, a hidden CLOB column is automatically created to store the XML data. The XMLType column itself becomes a virtual column over this hidden CLOB column. It is not possible to directly access the CLOB column; however, you can set the storage characteristics for the column using the XMLType storage clause."
I dont understand its stated here that it is a hidden CLOB column then why not I use setClob()? It worked fine for pure CLOB column (another table) then Why is it giving such error for XMLTYPE table?
I am struck up with this since 3 days. Can anyone help me please?
My code snippet:
query = "INSERT INTO po_xml_tab VALUES (?,XMLType(?)) ";
 //query = "INSERT INTO test VALUES (?,?) ";
 // Get the statement Object
 pstmt =(OraclePreparedStatement) conn.prepareStatement(query);
 // pstmt = conn.prepareStatement(query);
 //xmlData="test";
// If the temporary CLOB has not yet been created, create new
 temporaryClob = oracle.sql.CLOB.createTemporary(conn, true, CLOB.DURATION_SESSION);
 // Open the temporary CLOB in readwrite mode to enable writing
 temporaryClob.open(CLOB.MODE_READWRITE);
 log.debug("tempClob opened"+"size bef writing data"+"length "+temporaryClob.getLength()+
 "buffer size "+temporaryClob.getBufferSize()+"chunk size "+temporaryClob.getChunkSize());
 OutputStream out = temporaryClob.getAsciiOutputStream();
 InputStream in = new StringBufferInputStream(xmlData);
int length = -1;
int wrote = 0;
int chunkSize = temporaryClob.getChunkSize();
chunkSize=xmlData.length();
byte[] buf = new byte[chunkSize];
while ((length = in.read(buf)) != -1) {
out.write(buf, 0, length);
wrote += length;
temporaryClob.setBytes(buf);
log.debug("Wrote lenght"+wrote);
 // Bind this CLOB with the prepared Statement
 pstmt.setInt(1,100);
 pstmt.setStringForClob(2, xmlData);
 int i =pstmt.executeUpdate();
 if (i == 1) {
 log.debug("Record Successfully inserted!");
 }

try this, in adodb works:
declare poXML CLOB;
BEGIN
poXML := '<OIDS><OID>large text</OID></OIDS>';
UPDATE a_po_xml_tab set podoc=XMLType(poXML) WHERE poid = 102;
END;

How to insert more than 32k xml data into oracle clob column

how to insert more than 32k xml data into oracle clob column.
xml data is coming from java front end
if we cannot use clob than what are the different options available

Are you facing any issue with my code?
String lateral size error will come when you try to insert the full xml in string format.
public static boolean writeCLOBData(String tableName, String id, String columnName, String strContents) throws DataAccessException{
boolean isUpdated = true;
Connection connection = null;
try {
connection = ConnectionManager.getConnection ();
//connection.setAutoCommit ( false );
PreparedStatement PREPARE_STATEMENT = null;
String sqlQuery = "UPDATE " + tableName + " SET " + columnName + " = ? WHERE ID =" + id;
PREPARE_STATEMENT = connection.prepareStatement ( sqlQuery );
// converting string to reader stream
Reader reader = new StringReader ( strContents );
PREPARE_STATEMENT.setClob ( 1, reader );
// return false after updating the clob data to DB
isUpdated = PREPARE_STATEMENT.execute ();
PREPARE_STATEMENT.close ();
} catch ( SQLException e ) {
e.printStackTrace ();
finally{
return isUpdated;
Try this JAVA code.

Steps to insert xml data into oracle

Please give me next steps to insert xml data into oracle 9i:
i've been doing this steps :
1. create folder in oracle port:8080
2. copy xsd into folder
3. register schema
4. Give me next step...
5.
6.
Thanks

this is my complete xmlschema
<?xml version = "1.0" encoding = "UTF-8"?>
<xs:schema xmlns:xs = "http://www.w3.org/2001/XMLSchema">
 <xs:element name = "A3A8Vers" type = "xs:string"/>
 <xs:element name = "F1F5Vers" type = "xs:string">
 </xs:element>
 <xs:element name = "sequence" type = "xs:string">
 </xs:element>
 <xs:element name = "amf" type = "xs:string">
 </xs:element>
 <xs:element name = "trnsKeyNumber" type = "xs:string">
 </xs:element>
 <xs:element name = "mac" type = "xs:string">
 </xs:element>
 <xs:element name = "encryptionKey" type = "xs:string">
 </xs:element>
 <xs:element name = "signature" type = "xs:string">
 </xs:element>
 <xs:element name = "signer">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref = "entityNumber"/>
 <xs:element ref = "keyNumber"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name = "entityNumber" type = "xs:string">
 </xs:element>
 <xs:element name = "keyNumber" type = "xs:string">
 </xs:element>
 <xs:element name = "pblKey">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref = "entityNumber"/>
 <xs:element ref = "entityRole"/>
 <xs:element ref = "keyNumber"/>
 <xs:element ref = "publicKeyVal"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name = "ntrTime" type = "xs:string">
 </xs:element>
 <xs:element name = "deActionTime" type = "xs:string">
 </xs:element>
 <xs:element name = "actionTime" type = "xs:string">
 </xs:element>
 <xs:element name = "entityRole">
 <xs:complexType>
 <xs:attribute name = "role" default = "INVALID">
 <xs:simpleType>
 <xs:restriction base = "xs:NMTOKEN">
 <xs:enumeration value = "TKD"/>
 <xs:enumeration value = "SKD"/>
 <xs:enumeration value = "INVALID"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:attribute>
 </xs:complexType>
 </xs:element>
 <xs:element name = "publicKeyVal">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref = "exponent"/>
 <xs:element ref = "mod"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name = "exponent" type = "xs:string">
 </xs:element>
 <xs:element name = "mod" type = "xs:string">
 </xs:element>
 <xs:element name = "encriptionTransKey" type = "xs:string">
 </xs:element>
 <xs:element name = "keyType" type = "xs:string">
 </xs:element>
</xs:schema>.
I use command to create table :
create table elements of xmltype
xmlschema "http://192.168.1.1:8080/test.xsd"
element "publicKey"
. But why the result,table as object type. so i cant use command "desc <table_name>;"

How to Convert internal table data into xml and xml data into internal tab

Hi Guys,
I have a requirement that i have to convert the internal table data into xml format and viceversa . for my requirement i came to know that i have to use Transformations concept. i done the converting the data from internal table into xml data by using standard Tranformations. My Question is
1) Can i use same Transformation to convert the xml data into abap internal table. if it is possible then how ???
2) Is it possible using the standard Transformation or I have to go for XSLT approach
Please help me out from this guys,
Thanks and Regards
Koti

Hi Koti,
This is possible. There is a link. With the help of this link you can convert ABAP data to XML and vice versa.
Link: http://www.heidoc.net/joomla/index.php?option=com_content&view=article&id=15:sapxslt&catid=22:sap-xslt&Itemid=31

Best method to load XML data into Oracle

Hi,
I have to load XML data into Oracle tables. I tried using different options and have run into a dead end in each of those. I do not have knowledge of java and hence have restricted myself to PL/SQL solutions. I tried the following options.
1. Using DBMS_XMLSave package : Expects the ROWSET and ROW tags. Connot change format of the incoming XML file (Gives error oracle.xml.sql.OracleXMLSQLException: Start of root element expected).
2. Using the XMLPARSER and XMLDOM PL/SQL APIs : Works fine for small files. Run into memory problems for large files (Gives error java.lang.OutOfMemoryError). Have tried increasing the JAVA_POOL_SIZE but does not work. I am not sure whether I am changing the correct parameter.
I have read that the SAX API does not hog memory resources since it does not build the entire DOM tree structure. But the problem is that it does not have a PL/SQL implementation.
Can anyone PLEASE guide me in the right direction, as to the best way to achieve this through PL/SQL ??? I have not designed the tables so am flexible on using purely relational or object-relational design. Although would prefer to keep a purely relational design. (Had tried used object-relational for 1. and purely relational for 2. above)
The XML files are in the following format, (EXAMINEEs with single DEMOGRAPHIC and multiple TESTs)
<?xml version="1.0"?>
<Root_Element>
<Examinee>
<MACode>A</MACode>
<TestingJID>TN</TestingJID>
<ExamineeID>100001</ExamineeID>
<CreateDate>20020221</CreateDate>
<Demographic>
<InfoDate>20020221</InfoDate>
<FirstTime>1</FirstTime>
<LastName>JANE</LastName>
<FirstName>DOE</FirstName>
<MiddleInitial>C</MiddleInitial>
<LithoNumber>73</LithoNumber>
<StreetAddress>SomeAddress</StreetAddress>
<City>SomeCity</City>
<StateCode>TN</StateCode>
<ZipCode>37000</ZipCode>
<PassStatus>1</PassStatus>
</Demographic>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>1</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>2</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
</Examinee>
</Root_Element>
Thanks for the help.

Please refer to the XSU(XML SQL Utility) or TransX Utility(for Multi-language Document) if you want to load data in XML format into database.
Both of them require special XML formats, please first refer to the following docs:
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/xsu/xsu_userguide.html
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/transx/readme.html
You can use XSLT to transform your document to the required format.
If you document is large, you can use SAX method to insert data into database. But you need to write the code.
The following sample may be useful:
http://otn.oracle.com/tech/xml/xdk_sample/xdksample_040602i.html

Using importdata to import xml data into dynamic PDF form

Hi again,
Me and my colleagues have a problem using the importData service to import some xml data into an empty PDF form (represented as an XFA input variable).
In the server log I get the error that Only XDP data is supported for XFA forms, however I only have the xml data and not the entire xdp available.
Is this really not possible to to (like importing xml data to a form is possible in the Designer when creating forms).
I hope the scenario is understandable
Sincerely
Kim Christensen
Dafolo A/S
Denmark
PS: During the various projects I am working on I keep running into problems...however I am totally new to LiveCycle so I consider this very informative learning steps and appreciate all your help :-)

Hi again, I have been experimenting a little with both the renderPDFForm and importData services. However I don't seem to be ble to make them work as I need them to. My scenario is simple, I have one (call it a template xdp/PDF form) and lots of data in xml files (around 1000), that I need to import into the template. Therefore I have set up a "Watched Folder" to take the xml as a document (I guess this is a requirement) and then I need either the renderPDF or importData services to import the xml data into the template. I would like to know how I should setup the services to make this work. When I try to use importdata I setup the following: PDF document: set to be the template i need to import the xml to) Input data: the document variable (an xml file) that is passed to the Watched Folder Data merged PDF: set to an out xfaform When I do this I get an Coercion error in the server log: 2007-11-15 13:27:05,324 ERROR [com.adobe.workflow.AWS] stalling action-instance: 1506 with message: ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error. at com.adobe.idp.dsc.util.CoercionUtil.toDOMDocument(CoercionUtil.java:656) at com.adobe.idp.dsc.util.CoercionUtil.toType(CoercionUtil.java:878) at com.adobe.idp.dsc.util.CoercionUtil.toType(CoercionUtil.java:803) at com.adobe.workflow.datatype.runtime.support.AbstractDataTypeRuntimeHandler.coerceFrom(Abs tractDataTypeRuntimeHandler.java:64) at com.adobe.workflow.datatype.runtime.support.AbstractComplexDataTypeRuntimeHandler.getNode (AbstractComplexDataTypeRuntimeHandler.java:47) at com.adobe.workflow.dom.VariableElement.setBoundValue(VariableElement.java:93) at com.adobe.workflow.pat.service.PATExecutionContextImpl.setProcessDataValue(PATExecutionCo ntextImpl.java:729) at com.adobe.workflow.pat.service.PATExecutionContextImpl.setProcessDataWithExpression(PATEx ecutionContextImpl.java:335) at com.adobe.idp.workflow.dsc.service.SetValueService.execute(SetValueService.java:46) ... Caused by: ALC-DSC-119-000: com.adobe.idp.dsc.util.InvalidCoercionException: Cannot coerce object: <document state="passive" senderVersion="3" persistent="false" senderPersistent="true" passivated="true" senderPassivated="true" deserialized="true" senderHostId="127.0.0.1/172.16.10.125" callbackId="0" senderCallbackId="7" callbackRef="null" isLocalizable="true" isTransactionBound="false" defaultDisposalTimeout="600" disposalTimeout="600" maxInlineSize="65536" defaultMaxInlineSize="65536" inlineSize="8039" contentType="application/xml" length="-1"><cacheId/><localBackendId/><globalBackendId/><senderLocalBackendId/><senderGl obalBackendId/><inline>ï»¿<?xml version="1.0" encoding="UTF-8"?> <form1> <sub_BlanketTop /> <sub_SubjectTop> <f...</inline><senderPullServantJndiName>adobe/idp/DocumentPullServant/adobejb_server1</s enderPullServantJndiName><attributes file="c:\NCRConvert\ProcessForm\stage\Wx450d4b32843a0b0bcb8ef99e\NCR-00564_dXAE3soH.xml"/ ></document> of type: com.adobe.idp.Document to type: interface org.w3c.dom.Document at org.apache.xerces.parsers.DOMParser.parse(Unknown Source) at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source) However it is possible to manually import the xml data in Acrobat Professional without any problems. When I use the renderPDFForm with the following settings: Form to render: literal value that points to the template Form data: document variable from watched folder (xml) Content Root URI: repository:// With these settings I also get a coercion error, however it does not seem to be exactly the same. Sincerely Kim

Code to translate xml data into html using jaxp ?

Hi all !!
Could you please send me code to translate xml data into html using jaxp
i am sending my xml file and xsl file
its urgent
my xml file is :
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="scenario.xsl"?>
<scenarioReport>
<node name="node1">
<netObjId>124 </netObjId>
<result>undefined</result>
<report>The cell is 124.</report>
<action>qsdsqdqsd </action>
</node>
<node name="node 3">
<netObjId>124 </netObjId>
<result>undefined</result>
<report>Result is unresolved because ...</report>
<action>No action</action>
</node>
<node name="node 2">
<netObjId>124 </netObjId>
<result>undefined</result>
<report>qsdqsdqs </report>
<action>qsdsqd</action>
</node>
<node name="node 5">
<netObjId>124 </netObjId>
<result></result>
<report> </report>
<action> </action>
</node>
<node name="node 4">
<netObjId>124 </netObjId>
<result></result>
<report> </report>
<action></action>
</node>
</scenarioReport>
my xsl file is::
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html"/>
<xsl:template match="/">
<html>
<body>
<h2> Scenario Report</h2>
<table border="1">
<tr bgcolor="#9acd32">
<th align="left">Nodename</th>
<th align="left">netObjId</th>
<th align="left">Result</th>
<th align="left">Report</th>
<th align="left">Action</th>
</tr>
<xsl:for-each select="scenarioReport/node">
<tr>
<td><xsl:value-of select="@name"/></td>
<td><xsl:value-of select="netObjId"/></td>
<td bgcolor="#ffffff "><xsl:value-of select="result"/></td>
<td><xsl:value-of select="report"/></td>
<td><xsl:value-of select="action"/></td>
</tr>
</xsl:for-each>
</table>
</body>
</html>
</xsl:template>
</xsl:stylesheet>

Must be something wrong with your XSL.
However apparently it was so urgent that you didn't have the time to look at what you posted. They just "fixed" the forum software and apparently it doesn't escape HTML that you type in any more. Or stuff that looks like HTML, either. So your post was unreadable.
If your deadline hasn't passed, try reposting that code surrounded by [pre] and [/pre].

Inserting XML data into and XML template

Similar Messages

Maybe you are looking for