Install error FJS-00003: JAVA Add-In on AMD64 platform (NW04 SR1)

Hi gurus:
I came over an ugly error while trying to install the XI.
1. - I downloaded the corresponding software from the SAP Marketplace, as in the normal DVDs the AMD64 platform was not included.
2. - I copied the CDs for the EXPORT and the JAVA-Engine to one directory each, respective called export and JavaDVD. In directory JavaDVD I had to modify the LABEL.ASC file to be later accepted.
3. - I installed the ABAP WAS 6.40, unicode version. Everything worked ok. Also the post installation tasks could be carried out without problems.
4. - I wnated to install the JAVA Add-In. Everything starts fine, but the installation stops with the following lines in "sapinst_dev.log":
ERROR      2006-08-17 18:34:33 [iaxxejsbas.cpp:170]
           EJS_ErrorReporter
FJS-00003 TypeError: fmgt.getNode(listOnCD) has no properties (in script InstallationScript_265, line 8607: ???)
TRACE      [iaxxcwalker.cpp:301]
           CDomWalker::processStep()
No way out - I can only stop the installation.
The respective lines in the install script are:
8591: var sdaPath = installer.getCD("J2EE-ENG")+"/FS";
8593: // OS400 needs its own kind of pathname
8594: if (installer.onOS400()) sdaPath = os4_convertPath(sdaPath);
8597: // fill table with SDA which are to be deployed
8599: deployUnitsTable.remove();
8601: var listOnCD = sdaPath+"/DEPLOY.LST";
8603: var sdaList = new Array ();
8605: var fmgt = new FileMgt();
8607: var fstream = fmgt.getNode(listOnCD).getFileStream("READ");
... (blank lines deleted)
I can not heal that problem, I only understand that such a file does not exist! The directory has the following files:
I:\JavaDVD\CDLABEL.ASC
I:\JavaDVD\CDLABEL.EBC
I:\JavaDVD\content of JavaDVD.txt
I:\JavaDVD\Copy of LABEL.ASC
I:\JavaDVD\COPY_TM.HTM
I:\JavaDVD\COPY_TM.TXT
I:\JavaDVD\CRCFILE.DAT
I:\JavaDVD\J2EE_OSINDEP
I:\JavaDVD\LABEL.ASC
I:\JavaDVD\LABEL.EBC
I:\JavaDVD\LABELIDX.ASC
I:\JavaDVD\SCS_NTAMD64
I:\JavaDVD\SHAFILE.DAT
I:\JavaDVD\sss.txt
I:\JavaDVD\VERSION.ASC
I:\JavaDVD\VERSION.EBC
I:\JavaDVD\J2EE_OSINDEP\CDVersion.txt
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG
I:\JavaDVD\J2EE_OSINDEP\JDI
I:\JavaDVD\J2EE_OSINDEP\JDKVersion.xml
I:\JavaDVD\J2EE_OSINDEP\KernelVersions.xml
I:\JavaDVD\J2EE_OSINDEP\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\LABELIDX.ASC
I:\JavaDVD\J2EE_OSINDEP\PROD_LABEL
I:\JavaDVD\J2EE_OSINDEP\SDM
I:\JavaDVD\J2EE_OSINDEP\TEST-APP
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\FS
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\J2EENGINE
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\FS\TC_SEC_JAVA_CRYPTO_FS_LIB.SDA
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\J2EENGINE\J2EEINSTALL.SAR
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\J2EENGINE\SLDSERV.JAR
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP\EXPDUMP.001
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP\IMPORT.XML
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\JDMP\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\JDI\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\JDI\OFFLINE
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE
I:\JavaDVD\J2EE_OSINDEP\JDI\OFFLINE\DEPLOY.LST
I:\JavaDVD\J2EE_OSINDEP\JDI\OFFLINE\SAPDEVINFF09_0.SCA
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE\DEPLOY.LST
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE\SAPBUILDT09_0.SCA
I:\JavaDVD\J2EE_OSINDEP\JDI\ONLINE\SAPDEVINF09_0.SCA
I:\JavaDVD\J2EE_OSINDEP\SDM\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\SDM\SDMKIT.JAR
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\LABEL.ASC
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\calculator.ear
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\CalculatorLibrary.sda
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\ShoppingCalculator.ear
I:\JavaDVD\J2EE_OSINDEP\TEST-APP\630\UtilityLibrary.sda
I:\JavaDVD\SCS_NTAMD64\LABELIDX.ASC
I:\JavaDVD\SCS_NTAMD64\SCS
I:\JavaDVD\SCS_NTAMD64\SCS\LABEL.ASC
I:\JavaDVD\SCS_NTAMD64\SCS\NT
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64\SCS.SAR
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64\SCSCLIENT64NUC.SAR
I:\JavaDVD\SCS_NTAMD64\SCS\NT\AMD64\SCSCLIENT64UC.SAR
Any help appreciated!!
Many thanks in advance!
stephan

SOLVED
hi peers. Finally I've got an answer from SAP. The file was simply missing from the distribution! I created it in the corresponding subdirectory:
I:\JavaDVD\J2EE_OSINDEP\J2EE-ENG\FS\
with just one line of text in it:
TC_SEC_JAVA_CRYPTO_FS_LIB.SDA
This solved that problem - the step could be carried out without any more problems.
BTW: What I do not understand is that the file was missing. Not only from the downloaded media, also from SPA's original DVDs. No such installation can work....

Similar Messages

Java Install error 1603 on Java 8u45

I am having issues getting Java to Install on a Windows 7 Pro PC in a stand alone environment.
Error Code 1603. Java is needed on this PC to be able to print shipping labels from FEDEX.com. I am trying to install using the administrator account. I have removed previous versions of Java. I have removed the MS updated KB2918614.
The java uninstall tool doesn't run because Java is required to run the java uninstall tool. I have run multiple Microsoft Fixit Tools. This is the second PC I have had this error with in this office. Does anyone have any thing more to offer that
might assist me. I have "Google'd" this error for 2 weeks now. Help would be greatly appreciated, Thank You!

Hi,
According to official site of Oracle, This is a known issue with Microsoft KB2918614The root causes of these errors are under investigation. If this error still persists after uninstalled this update.
You could try following zooeyhall’s suggestion to download and install a previous version of Java or try creating a new administrative user account and install Java with the new account.
https://social.technet.microsoft.com/Forums/windows/en-US/78ac199b-316b-4fbc-8b2b-2c90e5425ff0/java-install-errors
Regarding to JAVA installation error, I’d suggest that we post at JAVA forum for further support. There you can get more effective suggestion by other experts who familiar with it. Your understanding is highly appreciated.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Errors while installing database instance of Java add-in

Hi,
I encountered these errors while installing the database instance of Java add-in for ABAP using SAP NetWeaver 2004s SR1.
ERROR 2007-02-28 14:33:33
CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_13\bin\java.exe -classpath "C:\Program
Files\sapinst_instdir\NW04S\LM\AS-JAVA\ADDIN\ORA\CENTRAL\DB\install\sharedlib\launcher.jar"
-showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload
"C:/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/lib/iaik_jce.jar;C:
/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/jload.jar;C:
/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/antlr.jar;C:
/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/exception.jar;
C:/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/jddi.jar;C:/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/logging.jar;C:
/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/offlineconfiguration.jar;C:
/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/opensqlsta.jar;C:/Program
Files/sapinst_instdir/NW04S/LM/AS JAVA/ADDIN/ORA/CENTRAL/DB/install/sharedlib/tc_sec_secstor
efs.jar;C:\usr\sap\AP1\SYS\exe\uc\NTI386\ojdbc14.jar" -sec
AP1,jdbc/pool/AP1,
mdcsap05/sapmnt/AP1/SYS/global/security/data/SecStore.properties,
mdcsa
p05/sapmnt/AP1/SYS/global/security/data/SecStore.key -dataDir
C:/tmp/INSTALL/51031693\JAVA_EXPORT\JDMP -job "C:\Program
Files\sapinst_instdir\NW04S\LM\AS-JAVA\ADDIN\ORA\CENTRAL\DB\IMPORT.XML" -log jload.log'
aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program
Files/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/DB/jload.java.log' for more
information.
ERROR 2007-02-28 14:33:33
FCO-00011 The step importJavaDump with step key
|NW_Addin_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|7|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
Second error is easy, but I have no idea on how to resolve the first one. Please help!

Hi
what does jload.log and jload.java.log say ?
regards
dirk

ECC 50 DI Installation error-FJS-00003 TypeError: f has no properties

Dear Experts,
Earlier we had local installtion of ECC50 (DEV/TEST and PRD-CI) with SQL2000 DB, WIN2K3 EE OS.
We want to install one new application server i.e. PRD-Dialog Instance, so we have kept all the systems on domain (changed from Local to Domain).
We performed below activities to put all systems on same Domain.
1. Down the systems
2. Changed Domain
3. Created SAP users SAP<sid> and sapservice<sid> on DC with Global&local admin rights
4. Changed owner of both SAP services with newly created domain SAP user SAPSERVICE<sid>
5. Updated Host file entries
6. started Servers with Domain user <sid>adm , it is up and running.
Now we logged in with new application server with <sid>adm domain user and started Dialog instance installation thru sapinst.
After inserting installation drive, in next step it throws below error.
INFO[E] 2008-01-28 16:07:16
File system export (share) saploc does not exist.
ERROR 2008-01-28 16:07:21
FJS-00003 TypeError: f has no properties (in script InstallationScript_159, line 9500: ???)
Please revert back with valuable inputs.
Is there any steps missing to perform?
Regards,
Rakesh.

Hello Manoj,
Thank for your reply. I have installed JDK 1.4.2_12 version with JAVA_HOME env rightly set in the path as without which, i wouldnt have even gotten the installation master screen(Gui).
Any other workaround do u see?

Tuxedo 9.1 install errors with InnovationTargetException Java Error

Hi Everyone,
I have weblogic 9.2, tuxedo 9.1 and tools 8.49 installed on my Vista machine with no problems. Now another guy at the office is trying to install and when he trys to install tuxedo it pretty much closes immediately with the innovationtargetexception java error.
We have tried comparing his machine to mine and so far everything pretty much looks the same. I have java 1.6.03 and he has 1.6.05 but I don't think that is the problem.
Does anyone have any idea why he would be getting this java error this early in the install?
Thanks

For Vista Home:
1. Check the compatbility on exe file
2. set the registry values
3. Install the tuxedo91_32_win_2k3_x86.exe
4. Success
--- More infor--------------
Open tuxedo91_32_win_2k3_x86 properties & check the compatibility mode.. I changed into Win Serevr 2003 mode.. I avoided above LAX error.
Try creating the registry entry
HKEY_LOCAL_MACHINE/SOFTWARE/BEA Systems/TUXEDO/9.1/Environment
TUXDIR <c:\bea\Tuxedo9.1>
TUXDIR REG_SZ <tuxedo home directory>
NLSPATH REG_SZ <tuxedo home directory\locale\C>

WAS JAVA add-in for ABAP install error on AIX Oracle

Hi All
I am currently trying to install a 640 WAS JAVA add-in for ABAP on AIX 5.2 running oracle 9.2.0.6 for SAP 4.7 SR1.
I have successfully installed the ABAP stack, however, when I try to install the JAVA add-in, I get an error on step "Start SAP J2EE engine". The error is
INFO       2006-07-07 04:29:04
           CJSlibModule::writeInfo_impl()
Output of /usr/sap/BWP/DVEBMGS00/j2ee/os_libs/jcmon 'pf=/sapmnt/BWP/profile/BWP_DVEBMGS00_rhubwp01' is written to the logfile jcmon.log.
INFO       2006-07-07 04:29:04
           CJSlibModule::writeInfo_impl()
Execution of the command "/usr/sap/BWP/DVEBMGS00/j2ee/os_libs/jcmon 'pf=/sapmnt/BWP/profile/BWP_DVEBMGS00_rhubwp01'" finished with return code 0. Output: snipped
INFO       2006-07-07 04:29:04
           CJSlibModule::writeInfo_impl()
J2EE Engine DVEBMGS00 of SAP system BWP did not come up after 827 seconds: waiting for another 20 seconds.
ERROR      2006-07-07 04:29:04
           CJSlibModule::writeError_impl()
CJS-20058 J2EE Engine DVEBMGS00 of SAP system BWP did not reach state "Starting Applications" after 827 seconds: giving up.
I am new to JAVA, and I found some OSS notes (668606, 545422, and 943498) that might help, but they may as well be written in German for all I can make out what the notes are trying to say.
Any help would be appreciated.
Thanks
Sam

Oooops, I forgot to paste the error messages
dev_jcmon
[Thr 1] *** ERROR => Can't attach to administration shared memory (rc=3) [jcmonxx_mt.c 219]
dev_jcontrol
[Thr 1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
[Thr 1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
[Thr 1] JControlCloseProgram: started (exitcode = -1)
[Thr 1] JControlCloseProgram: good bye... (exitcode=-1)
dev_bootstrap
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit      = unlimited
=> Stack limit     = 4294967296
=> Core limit      = 1073741312
=> File size limit = 4294965248
=> Heap address = 0x0x1111d9fe0
=> Stack address = 0x1111b7a80
=> Stack low     = 0x1111b5180
=> Stack high    = 0xffffffffffff2b0
=> Stack Trace:
        pthread_kill() at 0x900000000382c08
        praise() at 0x90000000038261c
        raise() at 0x900000000045890
        abort() at 0x900000000052dc8
        GetPropertiesMD() at 0x900000010639774
        ciCreateJVM() at 0x9000000106d19f4
        JNI_CreateJavaVM() at 0x90000001066529c
        Unknown at 0x90000001062a810
        JHVM_LoadJavaVM() at 0x1000918d4
        JLaunchIStartFunc() at 0x10008bb14
        pthreadbody() at 0x9000000003734ec
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
dev_disp
J2EE server info
start = TRUE
state = STARTED
pid = 5926962
argv[0] = /usr/sap/BWD/DVEBMGS84/j2ee/os_libs/jcontrol
argv[1] = jcontrol
argv[2] = pf=/usr/sap/BWD/SYS/profile/BWD_DVEBMGS84_mantas
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=60977
argv[5] = -DLISTEN_PORT=60978
argv[6] = -DSAPSYSTEM=84
argv[7] = -DSAPSYSTEMNAME=BWD
argv[8] = -DSAPMYNAME=mantas_BWD_84
argv[9] = -DSAPPROFILE=/usr/sap/BWD/SYS/profile/BWD_DVEBMGS84_mantas
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5926962)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
DpEnvCheckJ2ee: switch off j2ee start flag
DpHdlDeadWp: restart wp (pid=5791744) automatically
std_bootstrap.out
JVMCI200 - ERROR: User register saving is not enabled, Garbage Collection could be incorrect.
JVMCI200 - ERROR: because of this the JVM library is explicitly aborting the process
JVMCI200 - ERROR: You must either rebuild the executable using "-bM:UR"
JVMCI200 - ERROR: or run with "export LDR_CNTRL=U
Thanks
Sam

Installing the Java Add-In for an existing abap system

Hi, Currently we are Installing the Java Add-In for an existing abap system.
Following the steps (Installation guide):
1) We sucessfully installed the Central Services Instance (SCS)
2) We sucessfully Installed the Database Instamce Java Add-In
Our problem comes in the third step
3) Central Instance Java Add-In
When the system prompts me the SAP System Identification (Select the central instance of your local host).
I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
(The same value)
I chose anyone, and click next.
The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
Any help is appreciated, and I will reward points if helpful.
Regards

I followed an advice made for a sap consultant, and delete some profile files.
I had the following files
DEFAULT.1.PFL
DEFAULT.2.PFL
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_DVEMGS00_bsomtymx005.BAK
DEV_SCS01_bsomtymx005
START_DVEBMGS00_BSOMTYMX0
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
after to delete the files, I have the following files
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_SCS01_bsomtymx005
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
Then, I restarted the installation, and the sapinst allow me to continue with the installation.
I really do not know if the installation will be sucessful, but this issue is solved.
Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution.

Was 640 java add in installation error 1332 - no mapping...

i am currently installing
the was 640 java add in for the was 640 abap.
i am logged in as /Sap_LocalAdmin and the installation fails.
Please check the following error messages:
INFO 2005-03-16 16:36:26
Successfully added privileges 'SeServiceLogonRight SeNetworkLogonRight SeDenyInteractiveLogonRight SeDenyRemoteInteractiveLogonRight' to account 'JDCKARLSRUHESAPServiceJXI' on host '.'.
INFO 2005-03-16 16:36:28
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'JDCKARLSRUHEjxiadm' on host '.'.
ERROR 2005-03-16 16:36:28
FSL-00001 System call failed. Error 1332 (No mapping between account names and security IDs was done.
) in execution of system call 'LookupAccountName' with parameter (NULL, jdcbwSAP_LocalAdmin, ...), line (305) in file (synxcaccmg.cpp).
ERROR 2005-03-16 16:36:28
FSH-00008 A system error occurred when executing function LookupAccountName. ErrorNo=1332
i don´t know exactly what to do now? should i edit the xml file or what can be done?
or am i wrong with my assumption, that the system´s reference to the group isn´t valid?

Hi,
i had the same problem too.
Actually i'm installing the "Sneak Preview SAP NetWeaver 2004 Slim Edition (Java)" on Windows 2003 DomainController. In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:host + "
SAP_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_LocalAdmin"'
and
'name:host + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
Good luck,
Philipp Kammerer

How to install java add in

How do you do the java Add-In installation either on NW04 or NW04s when the ABAP stack is on the latest support package level when compared to the support package level on the media you use to install the java Add-in.

Hi Bharath,
For a Java Add-In you would first need to create a new client on the ABAP side
which would be used during the Addin Installation. For more info please see the
guide @
http://service.sap.com/instguides -> Netweaver 04 -> Installation -> Web AS ->
Documentation -> Database -> Web AS.
As for the Patch levels, it will not be an issue as you
can patch the Java components later using SDM.
Regards
Srikishan

NW04s Java Add-in Failes

Hi Friends,
We upgraded our BW 3.x to NW04s SR1 succesfully. Now we trying to install the Java add-in to the existing NW04s ABAP system. The second step "Database instance Java Add-in" keep failing with following error message. We are on Solaris 9 and Oracle 10g. Did any come across this error. Your ideas and suggestion greatly appreciated.
CJS-00030 Assertion failed: in
function (role) {
NWUsers.trace("NWUsers.getAccountData(", role, ")");
this._initAccountData();
ASSERT(arguments.callee, this.haveAccountData(role), "role " + role
+ " is not created yet.");
var ad = this._readAccountDataFromKeydb(role);
ad = this._readAccountData(ad);
var masterpwd = this.getMasterPassword();
if (ad.password == "" && this._useMasterPasswordForAccountData(ad)
&& ad.type == "USER" && masterpwd !== undefined && role !=
NWUsers.roles.J2EEGuest && !ad.locked) {
ad.password = masterpwd;
NWUsers.trace("NWUsers.getAccountData(): ", dump_properties(ad));
return ad;
role ORA_SID is not created yet.
ERROR 2006-10-17 18:56:34
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException:
error text undefined.
Thanks
Naren

From Note 921594:
Error in sapinst_dev.log: role ORA_SID is not created yet.
Symptom:
You get the following error in sapinst_dev.log: "role ORA_SID is not created yet".
Solution:
Modify control.xml in the installation directory as follows:
1. Search for the string "NWDBora.prototype.updateOSAccounts = function(){"
2. Go to the end of the following lines:
var roles = [];
var dbHost = this.getDBHost();
if (dbHost && !dbHost.equals(installer.getHostName())) {
3. Remove the following 5 lines:
    if (installer.onWindows()) {
      roles.push(NWUsers.roles.ORA_SID_OPER, NWUsers.roles.ORA_SID_DBA, NWUsers.roles.ORA_DBA,NWUsers.roles.BACKUP_OPER);
    } else {
      roles.push(NWUsers.roles.ORA_OPER, NWUsers.roles.ORA_SID,NWUsers.roles.ORA_DBA);
4. Copy keydb.1.xml to keydb.xml using the following commands:
   cp keydb.1.xml keydb.xml
5. Restart the installation.
6. On the "What do you want to do" screen, choose "Continue old installation".

Crm7.0 double stack abap and java-add-in in one instance

hi all,
how can i install a double stack java-add-in? i use the sapinst from medium -> dvd with number 51038620_8. In sapinst I must decide for abap or java central instance. first, i install the abap central instance, i use the following p.a. sapsid ->sp7 and dbsid -->sp7. the install of abap central instance is complete successfully. SysNR00. Then i restart sapinst and i choose install java central instance with a new sapsid --> sp8, an the same dbsid --> sp7.For Java was create the following SYSNrs: JC1 --> 01 and SCS --> 02. I choose SAPJSF for Communication ABAP/JAVA Stack. sapinst stops by step "minimal configuration" after JAVA Import with "webdispatcher start" server0 -> unknown.
Should I install the webdispatcher in sapsid SP7?
The following dbschemas was created ABAP --> SAPSP7 and for JAVA SAPSP8DB.
Thanks,
Christoph

hi markus,
please wait a moment. I reinstall under IBM_JDK_1.4.2 SR13. Please wait ...
When i get the same error -> dont start dispatcher and derver0.
I provide the logs from dir /usr/sap/SJ7/JC01/work.
I sent tzhe mail.
Thnaks,
Christoph
Edited by: Christoph Kautz on May 17, 2010 1:32 PM

Livecache on MAXDB AIX install error

Hi
Currently we have an SCM DB running on Oracle(DSC) and a livecache system (DLC) running on MAXDB on our AIX server. I have installed another SCM DB on oracle (SCD) on an NT. The livecache system will be running on the AIX server mentioned above on MAXDB (I know this isn't SAP best practice, but I am not the architect of these systems).
I installed the livecahe back in Dec05, and it failed. I was told to unistall it (again not my call), which I did.
Now I have to install it again, and when I go to install it, it fails almost immediately in the "Database server account Creation" step with:
the file /sapdb/LCD/db/pgm/kernel not found
when I ignore this error, I get the following error:
FJS-00003 TypeError: linkTarget has no properties (in script InstallationScript_112, line 6383: ???)
Has anybody seen this?
Thanks in advance

Hi Roland
Thanks for the prompt reply. I really appreciate it.
Following is the output from XCMDOUT.LOG
ERR
-24973,ERR_XPCHECK: param check failure/request
CONTROLUSERID Mandatory
Following is the outout from SAPliveCacheAPOLiveCache_install-20.01.2006-08.52.log:
Installation of SAP liveCache APO LiveCache
STDOUT: ********************************************
STDOUT: starting installation Fr, Jan 20, 2006 at 08:52:11
STDOUT: operating system: AIX PowerPC 5.3.0.0
STDOUT: callers working directory: /LCD_inst
STDOUT: installer directory: /sapcds/51030383/LC750_1/UNIX/AIX_64
MSG: InstallRegistry: space check ok: 5971816 kb on /sapdb (8388608 kb total) available
MSG: install registry successfully locked
MSG: read 14 PACKAGES
MSG: net registry size = 159291 bytes
WRN: InstallRegistry::reserveSpace(): file >= 1024 kb
STDOUT: archive directory: /sapcds/51030383/LC750_1/UNIX/AIX_64
STDOUT:
dependencies for package "Database Kernel" resolved
dependencies for package "Server Utilities" resolved
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Server Utilities" resolved
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
dependencies for package "Base" resolved
package "Base" has no dependencies
MSG: no installation data to migrate
STDOUT:
starting preparing phase of package Base 7.5.00.09 64 bit
"SAPliveCacheAPOLiveCache_install-20.01.2006-08.52.log" [Read only] 79 lines, 3284 characters
STDOUT:
starting preparing phase of package Server Utilities 7.5.00.09 64 bit
STDOUT: -
x_server is not running
XSERVER INFO: is_running = 0
XSERVER INFO: lasterr =
WRN: try to install release "7.5.00.09" over existing "7.5.0.24"
MSG: update test: installed release newer
MSG: update from "7.5.0.24" to "7.5.00.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Database Kernel 7.5.00.09 64 bit
STDOUT: -
STDERR: cannot do update check - test file "/sapdb/LCD/db/pgm/kernel" not found
STDERR: installation exited abnormally at Fr, Jan 20, 2006 at 08:52:26
MSG: packagedata of package Server Utilities not changed
MSG: packagedata of package Base not changed
MSG: packagedata of package Server Utilities not changed
MSG: packagedata of package Database Kernel not changed
MSG: install registry successfully unlocked
You might be right about me uninstalling the instance correctly (at least it would make sense). Should I try to uninstall it again??
As for your last question, YES, I am trying to install a livecache db on an AIX box that already has an SCM db running on it and the associated livecache DB. So when I am done, this server will have 1 SCM db and 2 livecache databases.
Thanks again for the help
Regards / Sam

Install SAP ERP 6.0 EHP4 Appl Srv FJS-00003 and FCO-00011 Error

Hello to all
i will Install an Linux Appl Srv (SLES 10 SP3) for our Windows 2003 x64/Oracle 10.2.0.4 SAP ERP 6.0 EHP4 Central Instance but i get the following errors
ERROR 2010-10-28 11:35:47.149 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
ERROR 2010-10-28 11:35:48.796 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
i have found some Instruction to set JAVA_HOME, SAPINST_JRE_HOME .. but his not helps.
Here the System Settings
SUSE SLES 10 SP3
InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM
NW_7.01_SR1_Kernel_Linux__OS_400
ORACLE 10.2 64-BIT / ORACLE 10.2 32-Bit / Client / Number 51033272
sap-locale-1.0-25.7.1.x86_64.rpm
sapinit-3.0-1.13.1.x86_64.rpm
saplocales-2.4-4.x86_64.rpm
sapinst stared as root
profile and global directory from windows mounted to /sapmnt/E12/
cat /etc/profile.d/alljava.sh
export JAVA_HOME=/opt/j2sdk1.4.2_19
export JDK_HOME=/opt/j2sdk1.4.2_19
export SDK_HOME=/opt/j2sdk1.4.2_19
export JRE_HOME=/opt/j2sdk1.4.2_19
export SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
export JAVA_BINDIR=$JAVA_HOME/bin
export PATH=$PATH:$JAVA_HOME/bin
cat /etc/profile.d/alljava.csh
setenv JAVA_HOME /opt/j2sdk1.4.2_19
setenv JDK_HOME /opt/j2sdk1.4.2_19
setenv SDK_HOME /opt/j2sdk1.4.2_19
setenv JRE_HOME /opt/j2sdk1.4.2_19
setenv SAPINST_JRE_HOME /opt/j2sdk1.4.2_19
setenv JAVA_BINDIR $/bin
setenv PATH $:$/bin
export tels me
declare -x JAVA_BINDIR="/opt/j2sdk1.4.2_19/bin"
declare -x JAVA_HOME="/opt/j2sdk1.4.2_19"
declare -x JDK_HOME="/opt/j2sdk1.4.2_19"
declare -x JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x PATH="/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin"
declare -x SAPINST_JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x SDK_HOME="/opt/j2sdk1.4.2_19"
setenv tels me
JRE_HOME=/opt/j2sdk1.4.2_19
SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
JAVA_BINDIR=/opt/j2sdk1.4.2_19/bin
PATH=/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/usr/bin/X11:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
JAVA_HOME=/opt/j2sdk1.4.2_19
SDK_HOME=/opt/j2sdk1.4.2_19
java -version
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
i hope somebody can help me
best regards
Oliver
Edited by: Oliver Fischer on Oct 28, 2010 12:09 PM

Hello Markus
here the last lines
ERROR 2010-10-28 14:27:11.986 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
TRACE 2010-10-28 14:27:12.435 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 12509
TRACE 2010-10-28 14:27:12.584 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 12510
ERROR 2010-10-28 14:27:13.283 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > Application Server > Oracle > Dialog Instance( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/ERPEhP4/LM/AS/ORA/DI. </body></html>
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Oliver

Was Java Add in installation error FJS 0003

Hi all
does anyone have an idea about the following problem?
I am installing Java Add In on AS/400 platform. SAPINST termitaes with error:
FJS-0003 Output is not defined.
I cannot understand what's going on.
Hints are really appreciated.
P.S. Was ABAP 6.40 is already installed on host.
F.V.

Hi,
i had the same problem too.
Actually i'm installing the "Sneak Preview SAP NetWeaver 2004 Slim Edition (Java)" on Windows 2003 DomainController. In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:host + "
SAP_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_LocalAdmin"'
and
'name:host + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
Good luck,
Philipp Kammerer

Error while installing the java add-on on abap system

Dear All,
We are trying to install java add-on with EP on present ABAP system, but getting struck up with error as below at creating java users (sapjsf) in central instance installation phase.
ENVIRONMENT:
ECC6.0
WIN 2003
KERNEL 136
SUPPORT PACK LEVEL AT 13
NETWEAVER 2004S SR1.
DB- ORACLE
error: ( usercheck.log)
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
error: (sapinst.log)
WARNING 2008-08-11 15:00:00
Execution of the command "C:\usr\sap\B60\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\lib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\sharedlib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install" -c sysnr=00 -c ashost=sapserver -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code -1. Output:
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
INFO 2008-08-11 15:00:00
Removing file C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\dev_UserCheck.
ERROR 2008-08-11 15:00:00
CJS-30197 . For more details see output of logfile:
ERROR 2008-08-11 15:00:00
FCO-00011 The step createJSF with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Please help us out at your earliest convenience.
Thanks and warm regards,

Dear Samrat Dangeti ,
Thanks.
Inst version: 701.
JDK version: 1.4.2_13
Regards,

Install error FJS-00003: JAVA Add-In on AMD64 platform (NW04 SR1)

Similar Messages

Maybe you are looking for