Install error when updating Lightroom 5.3 to 5.4 in Windows 7

I have tried several times to install Lightroom update from 5.3 to 5.4 in Windows 7 but get the error message "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder." Also, the Lightroom 5.4 installer shows 100% complete but when opening Lightroom to verify I see that it is still version 5.3. I have rebooted each time that I have tried. There is plenty of room on my harddrive.

Hi,
i have exactly the same problem.
"A problem occurred while extracting some files.
Check available space on your computer and the write privileges on the destination folder."
Laptop 1:Asus X750J - English Windows 8.1 64Bit with all current updates - I7 2.4 Ghz - 8 MB Ram
Laptop Lenovo W510 - German Windows 8.1 64Bit with all current updates - I7 1.7Ghz, 8MB ram
- run as administrator don't help
- run in compability mode dont' help
- change folder or disk don't help
- switching of antivirus don't help
- switching off user-control don't help
As OP has the same problem on his Windows 7 computer it seems that it is not OS related
Chris

Similar Messages

Error when updating itunes - There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor......HELP

Anyone got any idea what is going on here and what i should do?

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

After deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

Try downloading it with another browser.
If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer

Error when updating Playbook OS version via Blackberry Desktop Manager

Greeting,
I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
I've attached the step by step screenshots for reference, where you can find here:
http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
Thanks,

BLock wrote:
Sorry I can not help you with your problem but perhaps you can help me.
Can you advise where I can find info on "disable the automatic update"?
just ignore the update if you dont want it on the playbook
for reloading the OS
First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Error when updating

I get an error when updating. The message states,
Adobe Photoshop Elements 12.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.5
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Do you know what causes this issue?

Please see- https://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html
This error code occurs when multiple instances of Updater are open. Please refer to following forum link for more details: http://forums.adobe.com/message/4913117#4913117#4913117
Thanks
Andaleeb

I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

I would like to use tethering for my camera Nikon D610 in lightroom (version 5.4 is installed). When will lightroom support this camera with tethering?

We'll know when it happens, Lucht - software companies don't make support promises in advance.

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error when updating! Help please!!

I've been having a problem with the artwork updating on my 5th iPod. I kept getting an error when updating in iTunes whenever I added artwork to songs. So I was told to go into iTunes and go under iPod options and UNCHECK the box to display the artwork on my iPod. Then click okay. Then, go back into it and CHECK the box TO display the artwork and I get an error; "..Unknown Error occurred (-50)". Same error. And yes I have pressed the center button on my iPod to scroll through the different things. And I have restarted the program and computer. Tried disconnecting hte iPod, closing the program, restarting computer, restarting iTunes and reconnecting iPod and every combination of the steps (I've done many searches on this subject here) and same result. I've tried other different things but it all ends up to this error. Can some one please help me
Windows XP Pro

Hi Melophage,
I managed to do a OS X Recovery Reboot by restarting my computer and holding down Command and 'R'. I reinstalled OS X, and now my computer is working again.
However I'm going to take my computer into the Genius bar for review.
I have a Macbook Pro from 2012 (with a 2.6 GHz Intel Core i7 Processor) and was attempting to update OS X (I think Version 10.8.5).
Many thanks for your message.

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." c

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." Anyone have a fix for this?

Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes
help please ?

solved problems and reinstalled - 4 hours wasted trying to fix iTunes ...
Apple could do better to inform users when updating and upgrading .....

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Error when updating software (OS6) for BB9300

Hi,
Please help me, when I try updating the the OS of my BB9300 it says : there's an error when updating your software.
I want to update my OS to OS6.
PS, I use BB Desktop Software Manager.
Many Thanks! and Godbless!

Multiple posts of the same message:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/can-upgrade-my-OS/m-p/3012574#nobanner
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error when updating to 4.2

My Ipod Touch is on ios 2.2.1 and always get error when updating to 4.2

I think you have a 1st Gen iPod Touch. You can only go up to iOS 2.2.1 OR you can purchased the iOS 3.1 firmware.
http://support.apple.com/kb/ht2052
Purchase the iOS 3.1 Software Update directly from the iTunes Store.
IF NOT, then try to get a better internet connection (if connect with Wi-Fi) or wait a while and try to reupdate again. If you have to make sure iTunes is up to date (iTunes 11.x)
Message was edited by: keeferaf

Install error when updating Lightroom 5.3 to 5.4 in Windows 7

Similar Messages

Maybe you are looking for