Install KM&C on Different Server than Portal?

We need to install KM&C for an LSO project. It appears that KM&C is normally installed as an add-on to the Portal. Some of people here are concerned that adding KM&C to the Portal will cause performance issues, so they want to install KM on a different server than the Portal.
1. Have you had any performance issues with KM&C installed with the Portal?
2. Can KM&C be installed separately/standalonefrom the Portal (without another Portal install)? It wouldn't appear so from looking through OSS and the Service Marketplace, but I just want to make sure.
Thanks!
Jeff

Hi There,
You can configure the various KM functions associated with Content Management such as Workflow, Reporting, Scheduler Tasks, Content Exchange, and Indexing to only operate on a particular CM system i.e. server node.
Once you have created your nodes, you go into System Administration > System Configuration > Knoweledge Management > Content Management > Global Services, and within each particular function, for instance "scheduled tasks" you get the opportunity to select a specific system. This means that only the CM systems you check are responsible for executing the CM function.
Apologies for jumping between KM and CM, but essentially CM is only one component of KM. The Portal and KM are a unit. To operate KM you must have the Portal installed.
Paul

Similar Messages

Why do we install Solution Manager on Different Server

Hi Everybody,
Please if anybody can help in clearing the doubt that why it is advisable to install Solution Manager on Different Server.
Thanks in advance!!
Pawan

Thanks Juan. Got the answer.
Infact i was reading somewhere and got these points -
SAP Solution Manager is designed to run in a central u2018monitoringu2019 system at the customer site where all other SAP systems and mySAP solutions (satellite systems) are connected:
u2022 The entire Solution Landscape can be documented (u2018living documentu2019) in a central system (in fact several Solution Landscapes can be managed)
u2022 SAP and Non-SAP Systems can be modeled
u2022 All core business processes can be graphically assigned to all available productive systems in a solution landscape
u2022 All connected SAP systems can be monitored by the central SAP Solution Manager system
u2022 Satellite systems submit data via RFC / agents into the central system
u2022 The system with the SAP Solution Manager installed has a connection to SAPNet R/3 Frontend and the SAP Service Marketplace to communicate with SAP Support Back Office
The SAP Solution Manager serves as a platform that includes several features in one application. The strength of the SAP Solution Manager is the strong integration into the mySAP.com Solution and the optimal knowledge transfer SAP-Partner-Customer including central monitoring features, mainly focusing on core business processes. However, additional features and tools (Support Desk, SAP Note Assistant, MS NetMeeting,u2026) that are integrated in the SAP Solution Manager, also play important roles within a customeru2019s solution management.
It is important to understand that it is not necessary or useful to always have all integrated SAP Solution Manager components installed on one system. For example it is possible to install the SAP Solution Manager on one system and connect to another System where the Support Desk is installed. The SAP Solution Manager then only serves as a portal to jump to the included Support Desk system without notice.
If the customeru2018s main focus is the management of core business processes through service roadmaps and monitoring via SAP EarlyWatch Alert, Service Level Management (reporting) and so on, SAP recommends the SAP Web Application Server as the best choice for the SAP Solution Manager installation as it is also the platform for the SAP Solution Architect and has fairly small hardware requirements.

Install WDS services on different server SCCM2012

Hi, I'm still half raw in some activities SCCM and this is one of them.
I am planning to install the function
deployment image by SCCM2012, and due to lack of resources on the server that hosts the application of SCCM, I wonder if you can install the WDS service on a different server than SCCM?
You have some link with tutorial, kbases, etc ...?
Right of everyone's attention, I'm waiting.
Thank you.
VagnerOliveira

Você pode realmente criar um ponto de distribuição remota e habilitá-lo para PXE.
Isso instala automaticamente WDS para você. Isto é como você fazer isso.
http://www.gerryhampsoncm.blogspot.ie/2014/06/configmgr-2012-adicional-distribution.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie|
LinkedIn: Gerry Hampson|
Twitter: gerryhampson
OK, thank you, I'll be checking.
VagnerOliveira

Is it possible to manually setup a Folder Redirection Policy on SBS 2008 for one user? Also are you able to set up folder redirection on a different server than you have SBS 2008 on?

I have a SBS 2008 DC I would like to be able to change the Folder Redirection to a different server. I also would like to be able to test with one user. I read on the forums that it is best to use the wizards for SBS2008. The only problem
I have with using the wizards is that I am unable to test and I am also unable to use a network share for my redirection location.

Hi,
I am sure you would get some help from :
http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
https://social.technet.microsoft.com/Forums/en-US/448583ca-471e-4a0c-9d26-aa9181e73962/folder-redirection-changing-location?forum=smallbusinessserver
User setting can be found:
Windows SBS Console > Shared Folders and Web Sites > Shared Folders - in Tasks panel click on Redirect folders for user accounts to the server.
Under Folder Names Select folder(s) you want to redirect (e.g. Documents).
Under User Accounts select accounts you want to have folders redirected.
Click OK
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How data flow when SSIS packages are run on a different server than the DB server

The scenario is that i have a dedicated SQL SErver 2014 SSIS machine that executes the packages.
The database server is a separate machine with SQL Server 2008R2.
1) Running SSIS packages that transfer data within SQL Server 2008R2 (same machine)
2) Running SSIS packages that transfer data between 2 separate SQL Server servers.
How the data flow in these two cases and what resource is being used where? (cpu,disk,ram,network)
Elias

When you have a dedicated SSIS server, all data read flows to that server, is processed using the resources of that ETL server and then sent back over the network to the destination server.
It doesn't matter if source and destination are the same server. If you use a data flow, all data flows over the network twice.
The only exception is when you don't use a data flow, but only SQL statements. In that case, data flows only between source and destination.
MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

How do I use OracleMaps Javascript API from a different host than MapViewer

Hello,
I have successfully set up the Mapviewer quick start 10131, and am able to view the sample page showMap.html perfectly. I would like to run this same sample on a different server than where Mapviewer is installed. Let say mapviewer is installed on jstraub-winsvr:8888 and I want to run showMap.html from jstraub-linux1:7777. I tried changing the function showMap and the location to oraclemaps like the following:
<script language="Javascript" src="http://jstraub-winsvr:8888/mapviewer/fsmc/jslib/oraclemaps.js"></script>
function showMap()
var baseURL = "http://jstraub-winsvr:8888/mapviewer";
var mapCenterLon = -122.45;
var mapCenterLat = 37.6706;
var mapZoom = 4;
var mpoint = MVSdoGeometry.createPoint(mapCenterLon,mapCenterLat,8307);
var mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addBaseMapLayer(new MVBaseMap("mvdemo.demo_map"));
mapview.setCenter(mpoint);
mapview.setZoomLevel(mapZoom);
mapview.display();
Now when I try running this page on jstraub-linux1:7777 I get a Javascript error, and in Firebug, I can see that there are request like the following:
POST: http://jstraub-linux1:7777/mapviewer/ReturnLocaleOper
GET: http://jstraub-linux1:7777/mapviewer/mcserver?xml_request=%3C?xml+version=%221.0%22+standalone=%22yes%22?%3E%3Cmap_cache_admin_request%3E%3Cget_client_config+map_cache_names=%22mvdemo.demo_map%22+format=%22JSON%22/%3E%3C/map_cache_admin_request%3E
Obviously those requests are bogus since mapviewer is at jstraub-winsvr:8888 and not jstraub-linux1:7777, I just want to run the page from jstraub-linux1:7777. Anybody know how I do this?
Regards,
Jason

I believe that I am having the same problem. While I don't yet have a resolution, I do have a bit more information that may be useful. I have examined the oraclemaps.js script file and found some relevant references to the Javascript document.location object. As I watch the script execute, it seems that the author has made the assumption that the page served to the user has been served from the same Oracle Application Server running MapViewer. I have listed the lines that contain references to document.location below. (The line numbers may be off by a line or two as I have made some minor changes to facilitate my investigation.)
Line 742 : //_f16._f104="http://"\+document.location.host\+"/mapviewer/foi";
Line 6280 : var x2=String(document.location);
Line 10270 : var x40=String(document.location);
By changing line 742 to...
f16.f104="http://mymvserver:8888/mapviewer/foi";
...I believe I have the script looking in the right place. (Previously, it had been looking for /mapviewer/foi on the server that originally served the page.)
The x2 variable (at line 6280) seems to provide the current document location as a means to determine the MapViewer URL. Once again, the author seems to presume that MapViewer is found on the same server that originally served the page.
this._f53=x2.substring(0,x3\+x5\+2)+"/mapviewer";
I changed this line to read:
this._f53="http://mymvserver:8888/mapviewer";
Having made these changes, I have moved past the "object not found"-types of errors I had been getting. I now get "Permission Denied" errors which, I am thinking, may be the result of cross-site scripting problems predicted by the previous poster.
So, my question is this: Is it really expected that the page that integrates the map display must be served by the same Oracle Application Server instance on which MapViewer is running? This strikes me as an absurd limitation, so I assume it is not the case. Indeed, there is a post on this forum by another user who claims to have written an ASP.Net application that uses the Javascript interface to integrate MapViewer and the map display ( Link:securing mapviewer ). This is precisely what we are trying to do; but I have yet to determine how to go about doing it.
Can this be done? Is there any documentation that describes how to accomplish this?

Is it possible to store indesign swf and resources in different location than html

I am using an email blast program to create a micro-site, but it doesn't let me store the html file with the swf and resources. When I upload the swf and resources to an external server and go directly to the swf address, the swf plays and the sound works. When I reference the swf in an html document on a different server than the swf and it's resources, the swf plays but the resources don't (sound files). Is there a way to make this work?

I am using an email blast program to create a micro-site, but it doesn't let me store the html file with the swf and resources. When I upload the swf and resources to an external server and go directly to the swf address, the swf plays and the sound works. When I reference the swf in an html document on a different server than the swf and it's resources, the swf plays but the resources don't (sound files). Is there a way to make this work?

Use a different SSO Server than the one specified during install.

Hello,
I found on documentation that OAS Portal Configuration Guide would tell me how to use a different SSO Server than the one specified during install. I need to tell an existing Portal installation to use a new Identity Management infrastructure server I installed.
However, documentation does not mention anything related to that. It states that ptlconfig would do the trick, but ptlconfig instructions are not clear on how to accomplish this.
Could anyone that has done this before, help me out? Thanks in advance...

Hello jlubbers,
That is exactly what I am talking about, the ptlconfig does not model SSO components. So I assume it is incorrectly referenced on several points of documentation as a tool to work with SSO parameters or configuration.
I need to know how to tell my Portal to look at the new SSO server. If someone has done it before, please let me know.
Thanks again.

Install SAP IdM MSSQL on different drive than "C:"

We are in the process of building our IDM systems and want to install the MSSQL DB on a different drive than C:. Has anyone else done this and what changes to the _SqlAuth.vbs & SQL4SAP.vbs (which _SqlAuth.vbs called during installation) are required to facilitate this.
Thanks in advance.

I am not sure what the problem here is.
The MMC files can be installed whereever you want.
Where the DB files are located is controlled by SQL Server.
If you already have the DB on C:\
Just detach, move and attach again.
That should do the trick.

WT SynchManager instl. on a different Server other than SAP/SQL Server.

Hi,
Is it possible to move/install WebTools SynchManager on a different server other than the SAP/SQL Server? Please let us know.
Note:
1. We are aware of the recommendation: u201CInstall the SynchManager on the SAP Business One server on which the DI API is installedu201D in the "Business One Web Tools SynchManager Guide.pdf".
2. But, SAP/SQL Server at our Client is starving of RAM due to a high number of windows services/application trying to run at the same time (although the maximum amount of RAM possible under the current configuration is installed (4GB)).
3. So, we are evaluating as to which of these application (WebTools being one of them) can be moved to a different server.
Thanks and Regards,
Kafil Shumon.

Hi Kafil,
You can put the synchmanager on a different server as long as the DI API is installed and that server can access the B1 licensing server.

MFA Server - User portal and mobile app web server should be installed where?

Hi. We are in the process of testing the Multi-Factor Auth server and are currently using it for two-factor authentication to RDS for a couple of users. At the moment we are only using the phone call/text options but I'd like to get the mobile app portion
working to test. Also still need to implement the user self-service portal for testing.
Currently I have a vm that was dedicated to MFA where the Multi-Factor Authentication Server software was installed. Now though I'm a bit confused as to if its safe to install the user portal and mobile app web service portion on this same machine
or if they should go on a different server(s)? Currently the box is internal but I'm guessing if it has also act as the web server we would stick it behind the TMG for external inbound access. Is external access to the primary MFA server ok?
What's the best practice for separation of the MFA roles; or is there none and its fine to just put it altogether?
Thanks.

Hello Col. Forbin,
Thanks for posting here!
You have a dedicated MFA server and if you install User Portal on the same server as the MFA Server, it uses RPC to communicate with the MultiFactorAuth service locally.
If the User Portal is installed on a different server, it must connect via the Web Service SDK. You can use either a username/password of a service account that is a member of the PhoneFactor
Admins security group, or you can configure client certificates. If using the username/password, you can encrypt the appSettings section of the web.config file if desired.
Under Inetpub\wwwroot\MultiFactorAuth when you edit the web.config file you need to make sure these values are set.
USE_WEB_SERVICE_SDK:
true
WEB_SERVICE_SDK_AUTHENTICATION_USERNAME: domain\user
WEB_SERVICE_SDK_AUTHENTICATION_PASSWORD:
password
OVERRIDE_PHONE_APP_WEB_SERVICE_URL:
You might want to refer this thread link:
https://social.msdn.microsoft.com/Forums/en-US/ad1f6fc1-ab3f-482d-a435-e4fd6665f640/mfa-user-portal-issue?forum=windowsazureactiveauthentication
Additional reference links:
https://technet.microsoft.com/en-us/library/dn376347.aspx#multifactor
https://pfweb.phonefactor.net/install/6.2.1.16387/release_notes.txt
Let me know if you have any further questions!
Regards,
Sadiqh Ahmed

SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
Luckily my solution only has 10 packages. I have verified and re-verified that everyone is set to dontsavesensitive.
I have verified and re-verified that the solution has the protection level to dontsavesensitive.
What on earth is going on here? I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
Can someone please help me out here?
The Degenerate Dimension

Hi MMiligan,
Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
protection level corresponds to the value of 0):
DTS:ProtectionLevel="0"
The following similar thread is for your reference:
http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Can I run a different user as the managed server than the admin server?

Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

You mean a different UNIX user? Yes, that should be fine.
-- Rob
Frank wrote:
Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

Can you run a different user on the managed server than the admin server?

Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

That shouldnt pose a problem.
anand
In article <3f679e4d$[email protected]>, Frank wrote:
>
Under unix, can I run a Weblogic 7 managed instance as a different user than the
admin server in the same domain? If not, any reference docs on BEAs site?

AEBS setup behaves differently on Lion Server than Snow Leopard

I have a small office setup with a Mac Mini Server running Lion server, a Canon Wifi printer scanner and a Canon USB A3 printer connected to an AEBS which is in turn connected to the buildings network gateway for internet access. We have 3 MacBook Pros (snow leopard) which connect wirelessly and the Mac Mini has an ethernet cable to the AEBS. Fairly simple and we just have 1 manual IP address for the server with the AEBS doing DHCP and NAT.
The issue I have is that if I change the AEBS settings using Airport Utility on a Mac Book Pro (the first time I just changed the DNS numbers to Googles free set and nothing else), I lose internet connectivity. I can get a partial connection if I also set the subnet to 255.0.0.0 (most websites load, but maybe 10% fail). Consistent and repeatable behaviour - every time I change the AEBS settings I lose the internet and the same websites fail to load.
I can get everything working again by using the Mac Mini server to change something on the AEBS, or just restart the AEBS. In which case I can use the recommended subnet mask of 255.255.255.192 and everything works as it should.
So my question is Why?? Does the Server change some background ports, or retain some link to the AEBS which stops it functioning if I use a non-server machine to make a change??
One bit of background: When I first got the Mac Mini Server I let it take control of the AEBS setup - It asked, and I let it, but this activated the 802.1x security and required a login to the server before access to the wifi was granted. A nice feature but the Canon wireless scanner/printer does not support this, so I had to stop this and set the aebs manually, so I could use my scanner again. Is it possible that some link has been retained from this?
I do have a full working setup now that I realise I have to use the server to operate the AEBS, but can anyone help with an explanation? It caused me a few months of partial internet access and lots of wasted time, so would like to know if there is a solution that would allow me to set the AEBS from any Mac on our LAN.
Thanks for taking the time to help!

Which services have been removed or depreicated?
You have to bear in mind that 'removed' or 'deprecated' only really means 'no longer bundled and supported by Apple'. Just because Mac OS X Lion Server doesn't ship with a foobar server that doesn't mean you can't download and install your own foobar server. It just won't be integrated into the Server Admin apps.
For example, Lion Server no longer ships MySQL Server. So download and install your own copy. It's not like the GUI apps gave you any control over the MySQL anyway, other than starting it up and controlling the network ports.
Likewise for print server. Some of the advanced print features such as quotas have been removed from the GUI, but you can implement them yourself.
Likewise with QuickTime Streaming Server, where the functionality is little more than a web service.
What features that have been enhanced?
Lion Server has simplified the setup of a server for small workgroups with simple requirements. If that's you then the whole experience may be enhanced since you're not swamped with a slew of options that you don't understand, or need.
I think a lot of people were also stymied by Snow Leopard Server because they expected the GUI apps to cover all the options, which was never the case.
So my original point stands. There is pretty much nothing you cannot do in Lion Server than you could do in Snow Leopard Server, it's just that it might not be supported by the GUI. Most serious server admins eschew Server Admin.app anyway since even Snow Leopard Server's admin app doesn't cover all the capabilities of some of the services, so you end up driving it via the command line anyway.

Install KM&C on Different Server than Portal?

Similar Messages

Maybe you are looking for