Installed 9.1.6 and all i get is beachball everytime i open logic (10.6.8)
Installed 9.1.6 and all i get is beachball everytime i open logic (10.6.8)
Tried repairing disk permission, put in SL disk and used disk utility to repair disk, Deleted logic Plist from preferences still no joy
I tried all sorts but nothing worked (Prokit included)
In the end i upgraded to Lion (Downloaded from App store), installed it and now Logic 9.6.1 works perfectly.
I must add i have just about all the big name plugins and the only ones i had trouble with was the Xils labs stuff, Soundtoys just needed an update even all my Waves/UAD stuff worked ok.
Similar Messages
-
My computer crashed necessitating re-install of operating sys and all programs including iTunes. When I click on a song in my library I get an error message "can't find this song, want to search?" What gives? How can I listen to songs in my library on this computer now?
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I installed Adobe Flash Player 13 - all I get now is "Plug-in Failure" - tried to uninstall fresh install reinstall and still "Plug-in Failure" HELP PLEASE ?
The currently available Flash v13 is broken, see this thread:
https://discussions.apple.com/thread/6074079?tstart=0
Run the uninstaller as explained above and download an older version:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html -
i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I did install Adobe Premiere 11 and I cannot get it open, error 126
I have Windows 8 Pro / 64 bit
I did install to day:
Adobe Photoshop 11 and
Adobe Premiere Elements 11
When trying to open (load) Adobe Premiere Elements 11 video editing
there is an error
ERROR
LoadLibrary with error 126
Specified part cannot be found
I had same problem with Adobe 8 and same now with Adobe 11
What to do
or do I return product back, refunding money?
(I did buy it to day)
Greetings
kariHei,
First: Thank you:
I succeed, finally, after few uninstalling/ installing driver and software
/Adobe Pre 11: in differennt order:
AMD/Ati monitor driver run to dating new correct one did not help,
( I had Win7/64 running (pure install with all software), Win8/64 changed
plenty drivers to "her" own General Drivers (Microsoft), what is wrong!!!! )
so I delete monitor driver twice!! First delete did not help, so I delete
again all and run hard disk defrag, re delete driver and forced system to
load AMD/Ati win8 driver and reboot and re install Adobe Premiere 11 again
and after that, now call for error 126, so software works also in video
part.
Thank you help
even my explain may not be so clear, but now ok
(Must say, anyway, plenty "rabbish" is in Windows8 now in, when looking in,
but too sensitive to delete similarities away, when the order of
similarities (what is a last one) is not clear and it is not same order
with Windows in different installations)
Now
AsusTek informs for 3 year old motherboard, no win8 correction coming,
suggest to delete softwares, in question, huh huh.
It seems Win8 is also now working properly like when I open from Start
window Worktable, appears an error AsusSetup does not support this
operating system: WNT_6.2P_64_MCE
So:
Windows 8 Pro /64 and
Adobe and
Asus
are still far from pre-co-opertion for a client
Thank you Adibo, now, first time I did get a proper assistance for software
problem
kari
2012/12/12 Bill Hunt <[email protected]>
Re: I did install Adobe Premiere 11 and I cannot get it open, error
126
created by Bill Hunt <http://forums.adobe.com/people/the_wine_snob> in *Premiere
Elements* - View the full discussion<http://forums.adobe.com/message/4915366#4915366 -
I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.
Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541 -
Help I tried opening my Mac book pro after shutting it down but it won't open and all I get is a grey screen and a mo Jong mouse but nothin else so can u help me ??
Hey HJA96,
Thanks for the question. I understand that your MacBook Pro is booting to a gray screen. The following article addresses this symptom, and provides relevant troubleshooting information:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Some of the steps included:
- Disconnect, test peripheral devices and network cables
- Perform a Safe Boot
- Reset the NVRAM / PRAM
- Start from your Mac OS X Install disc; use Disk Utility
- Check your cables and power source
- Remove third-party RAM and internal hardware
- Perform an Archive and Install installation of Mac OS X
- Perform an Erase and Install installation of Mac OS X as a last resort
(See article for full information on all of the above)
Thanks,
Matt M. -
I am trying to stream video from iTunes store for the last 2 days and all I get is the message "iTunes store is unavailable. Try again later." I have tried turning it off, unplugging all cords, restarting it, reseting it, restoring it, and signing in and out again. Netflix works, but iTunes seems to be bugging out. If anyone could help, it would be much appreciated. Thanks.
melaniefrommadisonville wrote:
I want to try to un-install iTunes then re-intstall but am a new mac user and don't know how to do this.
click here and follow the instructions. -
Just installed 7.0.2 and all my apps are gone... What to do now?
Just installed 7.0.2 and all my apps are gone....what to do now?????
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?
uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
for the installation file(s):
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
why doesn t my mac pro boot up, i turned it on today and all i get is the white power light on the front of the computer starts flashing, does any body know about this problem?
Which model of Mac Pro do you own?
Check Crucial.com for their opinion, but there are cheaper ways to go. -
How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm? I have the app installed on my iPad and can't get it to play!
I haven't received an answer. I hope someone can answer this because it's an ongoing problem that I can't play some CDs on my MacBook Air (see my original post for the details). Anyone? Please? Thanks in advance!
-
How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.
First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
The telescope instruction says open a Terminal and put in ls/dev/* and other such things and all I get back is that none of them are recognised.
JeffersEWhy don't you call the telescope company for support and let them explain it to you. Usually there is software involved with those types of telescopes and if that software doesn't support Mac, it won't matter how or what USB port you plug it into because no drivers or anything will load for it.
-
I download an app. But doesn't show up on my homepage. I go to download it again from the cloud and all I get is a message saying "you already download this application so you will be able to redownload the app free of charge" I press ok. Still don't have it
What is the app? What "homepage" do you mean?
Maybe you are looking for
-
How to restrict manual changing of free goods in sales order
Hi , Goodmorning , We have some requirement : In sales order free goods quantity determination by system should not be allowed to change manually , where can we do this ? Looking for your inputs Thanks and regards Venkat
-
How do I use my iphone as a modem
-
Unable to update BPEL workflow task using pl/sql procedure
All, I am on a project which involves APEX/BPEL integration. There is a need to update a workflow task created using pl/sql block of code. This uses the out of the box TaskQueryService webservice calls and I am getting the below exception. 7,380> <ER
-
Can I stream live world cup games on IPad?
I know ESPN3 and Univision will be streaming games live. Does anyone know if on the 3g network I will be able to watch them? I do not own an IPad but am highly interested in purchasing one.
-
Reading all select-option and parameter fields
Hello All, I have a reaquire ment like ' i Will take a report name as input from user , and i need to read all the fields declared with PARAMETERS and SELECT-OPTIONS. ' one thing i can read the program and go line by line or scan the progra