Installing flashplayer 11 on Linux 64 bit - error while loading shared libraries: libX11.so.6

I've downloaded the flashplayer_11_sa_debug.i386.tar.gz file and extracted it on my RHEL box. When I run ./flashplayerdebugger I get the following error:
./flashplayerdebugger: error while loading shared libraries: libX11.so.6: wrong ELF class: ELFCLASS64
This lib is found in /usr/lib64/libX11.so.6 on this machine.
It is my understanding that flashplayer has native 64 bit support on Linux and therefore should be compatible with lib64 libaries, so why I am I seeing this error? I've been told it's because it's a 32 bit version of the player....
I also see this error if I install the flashplayer_11_sa.i386.tar.gz projector instead of the debugger version.
There don't seem to be any specific 64bit versions of the flashplayer from the download page: http://www.adobe.com/support/flashplayer/downloads.html, yet there seem to be beta releases of a 64 bit Linux player which are no longer available.
Can anyone help me with this? Where can I get a 64bit v11 flashplayer for Linux?
Thanks

Hi MurrayFurtado,
The builds you are attempting to download from that page are the 32-bit content debuggers and standalone players. To download the 64-bit players go to http://get.adobe.com/flashplayer (or get.adobe.com/flashplayer/otherversions).
Since you didn't specify which version of RHEL you have, FP 11 is supported on RHEL 5.6 or later (http://www.adobe.com/products/flashplayer/tech-specs.html).
Maria

Similar Messages

Xorg7 - error while loading shared libraries

did anyone else have this problem? I've followed the wiki, and tried solutions that have worked for others but no luck still
xauth: error while loading shared libraries: libX11.so.6: cannot open shared object file: No such file or directory
Couldnt get a file descriptor referring to the console

yep, that was it
I had an older version installed libx11-9.9.1
thanks

Unable to install JRun on Linux receive error while loading shared libraries

I'm installing JRun trial version on Ubuntu with java version
"1.6.0_07". I receive the following errors when I install:
guest:~/Desktop$ sh ./jrun-40-linux-en.bin -i gui
Preparing to install...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
Launching installer...
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directory

I get that error too when try to install Jrun 4.0 on Open
Suse 11.0, Can anyone show me how to solve that problem.

While booting linux VM getting error "error while loading shared libraries

Hi Expert,
while booting Oracle linux Virtual Machine getting error "error while loading shared libraries: libpopt.so.0 cannot open shared object file" no such file or directory
Now i am unable to boot linux, any help appreciated.
Note: Its Oracle Linux 5.8 x86_64 under Oracle VirtualBox
Edited by: IgnitedMind on Apr 30, 2013 7:12 AM
Edited by: IgnitedMind on May 1, 2013 12:04 AM
Edited by: IgnitedMind on May 1, 2013 12:06 AM

Without knowing what you have installed or what modifications you have done it is not possible to say what goes wrong. Like I previously mentioned, you may have installed an incompatible version of a core system library. Sorry, I'm not going to read any installation manual to find out what you might have done wrong. You may need to reinstall the complete system or just the popt installation package.
Based on my experience people sometimes seem to misunderstanding the concept of software version requirements, which are always minimum version requirements and does not mean, for instance, software made for gcc 4.1.10 does not work under 4.1.12. You cannot simply upgrade or downgrade core system libraries without affecting the installed system. Using YUM to install software will check this and prevent you from breaking your system. RPM does not check any dependencies and hence can break your system beyond repair.

Error while loading shared libraries after installing cleartype fonts.

Hi there.!
Since the default fonts of Arch looked quite ugly on my LCD, I read the Fonts wiki and installed cleartype packages from AUR.But now, when I try switching to runlevel 5 (I use GDM by the way), it throws up following error:
/usr/sbin/gdm-binary: error while loading shared libraries: libcairo.so.2 : cannot open shared object file: No such file or directory.
I didn't edit the pkgbuilds in any way.Running "locate libcairo.so" doesn't show up anything either.
Any help guys.?

Well you have two choices, use windows XP or google for 'fonts linux ugly'
or there is a search feature on this forum, it works well.
setting a right DPI will probably make your fonts look the best no matter what packages you install or ~/.fonts file you use.
Last edited by jacko (2009-01-10 12:32:54)

Install RAC failed with root.sh error while loading shared libraries: libst

Hi ,
I install rac under vmware workstation using this atricle .
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
everything work smoothly but I faced error with root.sh
Failed to upgrade Oracle Cluster Registry configuration
I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
that .
The probelm rasied when run
/u01/app/oracle/product/10.2.0/crs/bin/crsctl.bin: error while loading shared libraries: libstdc++.so.5: cannot
open shared object file: No such file or directory
Failure initializing entries in /etc/oracle/scls_scr/rac2.
Linux version is RHE4
[oracle@rac1 bin]$ uname -a
Linux rac1.localdomain 2.6.9-55.ELsmp #1 SMP Fri Apr 20 17:03:35 EDT 2007 i686 i686 i386 GNU/Linux
when install this package it does not work
[root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
dependencies:
libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.2)(64bit)
is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.3)(64bit) is needed by compat-
libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GCC_3.3)(64bit)
is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GLIBC_2.0)(64bit) is needed by compat-
libstdc++-33-3.2.3-47.3.ia64 libm.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
compat-libstdc++ = 7.3-2.96.128 is needed by (installed) compat-libstdc++-devel-7.3-2.96.128.i386 compat-
libstdc++ = 7.3 is needed by (installed) compat-gcc-c++-7.3-2.96.128.i386[root@rac1 RPMS]#
My probelm cannot install this packages ? What shoudl I do .

user12010537 wrote:
Hi ,
I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
Linux version is RHE4
[root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
dependencies:
libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
My probelm cannot install this packages ? What shoudl I do .
Hi,
You need to install the dependency package first like glibc, etc
also see the output from runcluvfy, it should show which packages need to installed
Cheers

Error while loading shared libraries: libclntsh.so.10.1

Hi,
I have installed R12 on Oracle EL 5.
AT the end during system check details,the check "database availability" shows passed, but when I checked log it says the following error at one point.
Executable : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 0
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Can you please let me know whether this is going to be a problem or not. If yes, how I can rectify this.
I could connect to DB using sqlplus without any issues.
Thanks
Vas
Complete message from "Database availability"
Database Availability
command: /diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /apps/tools/oracle/VIS/db/tech_st/10.2.0/VIS_home.env APPS/APPS
riwTDBup.sh started at Sun Jul 1 09:14:04 PDT 2007
Parameters passed are : /apps/tools/oracle/VIS/db/tech_st/10.2.0/VIS_home.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /apps/tools/oracle/VIS/db/tech_st/10.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /apps/tools/oracle/VIS/db/tech_st/10.2.0/perl/bin:/apps/tools/oracle/VIS/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/apps/tools/oracle/VIS/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /apps/tools/oracle/VIS/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/apps/tools/oracle/VIS/db/tech_st/10.2.0/lib:/usr/dt/lib:/apps/tools/oracle/VIS/db/tech_st/10.2.0/ctx/lib
Executable : /apps/tools/oracle/VIS/db/tech_st/10.2.0/bin/sqlplus
riwTDBup.sh exiting with status 0
Database ORACLE_HOME connection test has succeeded
command: /diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /apps/tools/oracle/VIS/inst/apps/VIS_home/ora/10.1.2/VIS_home.env APPS/APPS
riwTDBup.sh started at Sun Jul 1 09:14:05 PDT 2007
Parameters passed are : /apps/tools/oracle/VIS/inst/apps/VIS_home/ora/10.1.2/VIS_home.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /apps/tools/oracle/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/lib32:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
Executable : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 0
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Apps ORACLE_HOME connection test has succeeded
null

Do an su - oracle and see if you can execute any commands. If you cannot, as root, vi /home/oracle/.profile and remove any LD_ASSUME_KERNEL references.
Also note that R12 is not certified for OL 5 or RH 5.
Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (64-bit)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416305.1
Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (32-bit)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402310.1

Awk: error while loading shared libraries: libdl.so.2: wrong ELF class: ELF

Hello,
I'm installing Application Dependency and Performance (ADP, also call CAMM) in OEM 11g. The steps is as follows:
1) go to the directory ../oms11g/ocamm and extract ocamm.zip file
2) then go to the directory ../oms11g/ocamm/Disk1/InstData/Linux/VM
3) run ./install.bin to perform the installation
However, I got following error message immediately:
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: wrong ELF class: ELFCLASS32
dirname: error while loading shared libraries: libc.so.6: wrong ELF class: ELFCLASS32
/bin/ls: error while loading shared libraries: librt.so.1: wrong ELF class: ELFCLASS32
basename: error while loading shared libraries: libc.so.6: wrong ELF class: ELFCLASS32
dirname: error while loading shared libraries: libc.so.6: wrong ELF class: ELFCLASS32
basename: error while loading shared libraries: libc.so.6: wrong ELF class: ELFCLASS32
Launching installer...
grep: error while loading shared libraries: libc.so.6: wrong ELF class: ELFCLASS32
/tmp/install.dir.5356/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Can anybody advise me how to resolve this issue? Also more info regarding our environment:
Product: Oracle Enterprise Manager Grid Control 11g
Operating System: Red Hat Enterprise Linux Server release 5.5 (Tikanga) 2.6.18 194.el5 (64-bit)
Hardware Platform: x86_64
Thanks,
Neddy
Edited by: user622199 on Mar 29, 2011 3:37 AM

execute below and check
cat install.bin |sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" > install.fixed
chmod +x install.fixed
./install.fixed

Awk: error while loading shared libraries: libdl.so.2: cannot open shared

I got the following error
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.4681/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Tuxedo 9.1 base installation complete
when tried to install Tuxedo 9.1 on unbreakable Linux 5. I am trying to install Peoplesoft.
I found this error is pretty common, not necessary appear when installing Tuxedo. I am searching around and a lot of people saying to comment out the line
export LD_ASSUME_KERNEL
The problem is I don't know which in which file I need to do it. Has anyone have the encountered the similar problem before? Thanks.

After reading the installation script, I figure out which is the evil file. I just post it here so if someone get into this problem in the future, he can fix it.
Here is the solution:
Assume you are at the directory where the install.sh is. Do the following:
-bash-3.1$ cd linux/sles9/base
-bash-3.1$ cp tuxedo91_32_SLES_9_x86.bin tuxedo91_32_SLES_9_x86.bin.bak
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
-bash: tuxedo91_32_SLES_9_x86.bin: Permission denied
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
Then run the installation script
sh install.sh and be happy as I am now!!!!

Oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared ob

Hi,
I'm installing Oracle 9i on IA 64, OS linux. I keep getting the following error when I run sqlplus
oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared object file: No such file or directory
ERROR:
ORA-24314: service handle not initialized
the LD_LIBRARY_PATH=$ORACLE_HOME/lib
is set in the environment. After this error it prompts me for a user name?
Regards

Hi Ruben
Before starting please make sure you have maintained all env for sidadm
commands may vary depending on os in case
Whenever I start SAPINST I set following before hand
TMPDIR=/usr/sap/install/SRA_CI : just a log directory
export TMPDIR
LD_LIBRARY_PATH=/usr/sap/sapmnt/SRA/exe
export LD_LIBRARY_PATH
umask 022
JAVA_HOME=/usr/sap/java
export JAVA_HOME
PATH=$/bin:$
export PATH
SAPINST_JRE_HOME=/usr/sap/java
export SAPINST_JRE_HOME
Hope this helps
success!!

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Error while loading shared libraries: libglut.so.3: cannot open shared

Hi, I bought the new Humble Bundle today and downloaded the tar.gz file for Fieldrunners (which is supposed to work under linux)
"error while loading shared libraries: libglut.so.3: cannot open shared object file: No such file or directory" is the message I get when I put ./Fieldrunners into konsole after copying the fieldrunners folder into /opt
I have freeglut-2.8.0-1 installed
This is the README:
This is Fieldrunners for Linux.
It was built under Ubuntu 12.04 but is known to work in other distros.
The only external dependancy is the freeglut3 library.
To install:
copy the fieldrunners directory (executable and game assets) to /opt
copy the .fieldrunners directory (user options, achievements and saves) to your home directory.
If you don't want to copy the fieldrunners directory to /opt, you can likely start fieldrunners from any folder and it will attempt to find the assets in the same folder as the executable.
The executable /opt/fieldrunners/Fieldrunners will create the .fieldrunners directory in the home directory if not found.
EDIT: Forgot to mention, there is no PKGBUILD file in the tar.gz
Last edited by harsha (2012-08-15 23:43:19)

My Fieldrunners says:
cannot open audio device (Device or resource busy)
Fieldrunners: pcm.c:928: snd_pcm_state: Assertion `pcm' failed.
... so I have to kill pulseaudio first (or use padsp). After that (with alsa), it has choppy sound. 1 second sound, one pause...
Spacechem is windows binary + a wine'ish blob (that just freezes on my machine), comes only as rpm/deb and seems to insist to be installed in /opt (AND some files in /usr/share). The included .exe doesn't work with native wine either (without further adjustments at least).
Doesn't really look good at all so far, this bundle.
edit:
Also: Uplink seems to be unplayable on a big resolution Display without workarounds due to its small font...?
Spirits says:
(Spirits-64:14143): Gtk-WARNING **: Error loading theme icon 'image-missing' for stock: Fatal error reading PNG image file: Incompatible libpng version in application and library
... but seems to work fine at a first glance (safe for a missing picture in the launcher which isn't really tragic).
edit:
( Aaaand, now I notice I'm in the wrong thread and/or forum. Where did that generic "is the bundle working?"-thread go? Stupid multi-tabbing xD )
Last edited by whoops (2012-08-16 20:47:17)

Error while loading shared libraries: libsapu16.so

Dear All
For SAP NetWeaver 2004s - TestDrive as user n4sadm
I am trying to get my hardware key by executing /usr/sap/N4S/SYS/exe/run/saplicense -get
as soon as I execute the command /usr/sap/N4S/SYS/exe/run/saplicense -get
It thrown an error
/usr/sap/N4S/SYS/exe/run/saplicense: error while loading shared libraries: libsapu16.so: cannot open shared object file: No such file or directory
I am installing on Fedora C10 and the kernel version is 2.6.27.9-159.fc10.x86_64
Any help is highly appreciated
Regards
Sunil

Hi Pankaj
Tx for the reply, Its been resolved.
I had installed csh shell, that is missing in my Linux
Thanks
Sunil

Error while loading shared libraries: libdb.so.3

Hi,
While running adconfig, I am getting below error:
/iAS/Apache/perl/bin/perl: error while loading shared libraries: libdb.so.3: cannot open shared object file: No such file or directory.
It is new cloned environment of 11.5.10.2 with 11g db on linux 64 bit server.
I checked for rpm compat-db-3.3.11-4, it is existing. What is the problem?
Thanks,
Kavitha

Hi Kavitha;
please check below note:
On 11.5.10.2/Redhat Enterprise version 5.2, Running Autoconfig adconfig.Sh Perl, Error While Loading Shared Libraries: the libdb.so.3: can't open shared object file: no such file or directory [ID 730656.1]
Regard
Helios

Error while loading shared libraries: libgij.so.7rh

Hi everyone,
I just installed jdk1.6.0_06 on red hat linux 5 server, and try to run a simply java class but have the following error message:
java: error while loading shared libraries: libgij.so.7rh: cannot open shared object file: No such file or directory
I have added the following into /etc/profile
export JAVA_HOME=/usr/java/jdk1.6.0_06
export PATH=$PATH:$JAVA_HOME/bin:$JAVA_HOME/jre/bin
export CLASSPATH=.:$JAVA_HOME/lib:$JAVA_HOME/jre/lib:$CLASSPATH
Can you kindly indicate the cause for this issue? Thanks a lot.
Best,
VovoTsai

You have GNU Java installed by default on many Linux distributions and this is being picked up ahead of the Sun Java. You can change the PATH declaration to make sure that the Sun Java is found first.
export PATH=$JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATHI have removed GNU Java from all my Linux installations.

Installing flashplayer 11 on Linux 64 bit - error while loading shared libraries: libX11.so.6

Similar Messages

Maybe you are looking for