Installing Windows 7 64 Bit Upgrade on a Multi-disk Mac Pro

A lot of the information I found to help me with this issue scattered all around so I thought I'd consolidate it in one place.
The situation: I wanted to install Windows 7 Home Premium 64 Bit on my boot camp partition. Windows Vista Ultimate 32 bit was already installed.
My System:
Mac Pro (early 2008)
2x Quad Core 3.0GHZ Zeon Processors
12GB Ram
3x 500GB Hard Drives
OS X 10.6.2
Boot Camp Assistant: 3.0.1
The Issues:
1.You cannot directly update a previous 32 bit installation with a 64 bit installation. You have to do a clean install.
2.If you do a clean install with an upgrade disk it will most likely not activate.
3.Windows 7 does not like more than 4 partitions. More than 4 it will fail to install.
4.Windows 7 does not like GPT (GUID Partition Table) disks and will fail to install if it detects one.
What worked for me after a fair number of false starts:
1.Put the Windows 7 Installation disk in your DVD drive.
2.Start Boot Camp Assistant and create a Boot Camp partition. I deleted my old Boot Camp partition prior to beginning. *DO NOT* start the install from the Boot Camp assistant. Once you create the Boot Camp Partition close the assistant.
3.Power down your computer. (Remember the Windows DVD is in the drive, leave it there.)
4.Remove any extraneous drives that are GPT or cause you to have more than 4 partitions. I installed on my second hard drive and removed the 1st and 3rd.
5.Restart your Mac holding down the “c” key to make it boot from the Windows install disk that is in the DVD drive.
6.Once the Windows Installer is active do a “Custom” installation.
7.Use the Installer utilities to format the Boot Camp partition as NTFS.
8.Install Windows 7 on that partition, but do not try to activate it at this time.
9.When Windows restarts you may have to hold down the “Option” key (Alt if you are using a PC Keyboard) and select the Windows restart disk.
10.Once you boot into Windows do all of the updates.
11.Once the updates are done, make sure you are booted into Windows and call Microsoft support and explain the issue (doing a clean installation with an upgrade disk.) The issue is very common and not specific to Mac users so they will pass you to Tech support and help you activate your copy of Windows.
12.Download (from Windows) the Boot Camp update and install it.
13.You should be fine at this point, at least I sincerely hope so
14. I also had a sound issue but that was resolved by downloading the latest Realtek HD Audtio Manager and wiggling the sound jack where my stereo system was plugged in, the RCA jack in the back of the system.
(Note: I haven't been able to locate my Boot Camp program or tray like I had on my Vista installation. I' haven't really looked. It isn't that big a hassle to hold down the “Option” key when I restart and just pick the OS I want to boot into.)
I hope this helps anyone that is having issues similar to what I experienced.
Message was edited by: gary_s

11.Once the updates are done, make sure you are booted into Windows and call Microsoft support and explain the issue (doing a clean installation with an upgrade disk.) The issue is very common and not specific to Mac users so they will pass you to Tech support and help you activate your copy of Windows.
Not always. I tried. Easier to reinstall Windows 7 over itself, activated fine. Or just do the legal thing and buy full copy. Mac Pro owners that want dual processor support need Pro or Ultimate (Enterprise also) rather than Home Premium.
I would NOT use Boot Camp 3.1, it causes problems for number of Mac Pro owners, though maybe not all so unclear what/why) but just stay with Boot Camp 3.0x from the Snow Leopard DVD (which can have trouble with AppleHFS)

Similar Messages

How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

Installing Windows 7 Upgrade Edition on a new Macbook Pro

Hi all,
I am a recent convert to Apple after becoming more and more disillusioned with Windows for the past 10 or so years. I have ordered a shiny new 15" 2011 MBP and can't wait for it to arrive!
My issue is that I am going to need to install Windows for occassional use with certain software as well as occassional gaming. I have a legitimate copy of Windows XP (as well as ME and 98) which I am perfectly happy with - However I understand that the new Macbooks will no longer support WinXP via Bootcamp?
I am a student and have recently purchased a copy of the Windows 7 upgrade edition to rectify this, but I have now read that you cannot perform a "clean" install from the upgrade edition?
I'm afraid I am finding this all very confusing. I do own a legitimate copy of WinXP, and am eligable for the Win7 upgrade, so any help getting this installed on my new Macbook? I would hate to have to keep my ancient desktop around just for Windows, as this would defeat the object of my new purchase.
I have found the following guide;
http://www.winsupersite.com/article/windows-7/clean-install-windows-7-with-upgra de-media.aspx
Does anyone know if this will work in my case or has anyone tried on a brand new MBP?
Thanks in advace for any advice and guidance you can offer.

I have read in an issue of Mac Format about installing Windows in VirtualBox? I'm not really sure how this differs from using BootCamp and what the advantages/disadvantages are...
Virtualization through Virtualbox (or Parallels or Fusion,) allows you to create a "virtual machine." In this virtual machine, you install Windows or Linux or whatever OS, just like you would a physical machine. But the "machine" is just some software and you view the machine as window within OSX. Think of it like a word processing program like Microsoft Word. You run Word to create documents. You can have multiple documents, but the documents can only be "run" within Word. And you can have multiple documents open at the same time and you can switch back and forth between documents without having to reboot OSX. So it is with virtualization. You can create multiple virtual machines (if you have enough hard drive space, just like Word.) You can run multiple virtual machines (if you have enough RAM, just like Word.) It's just that the "documents" are now operating systems rather than word processing or spreadsheets. The big advantage is that you don't have to reboot out of OSX in order to use Windows.
...i'm looking to mostly use windows for gaming, would this method be suitable for that as i see I would not have to restart the system.
And then we come to the disadvantage. A virtual machine has "virtual hardware". The "guest" operating system doesn't actually "see" the physical hardware directly. Instead a virtual motherboard, virtual hard drive, virtual keyboard, etc, are "presented" to the guest OS. The virtualization software must "interpret" the requests from the guest OS into things the physical hardware must do. As with any interpretation, there is a delay. Think of it like if you spoke only French and you talk through an interpreter to someone who only spoke Swahili. It works, but is slower than if you were able to speak Swahili. For most things, this is fine. The weak link is the virtual video card. A simple game like solitaire doesn't need much graphics power so the "slowness" is not an issue. But a FPS game like Call Of Duty or Crysis, where graphics performance is critical, a virtual machine often chokes. So the use of virtualization in gaming really depends on the game.
BTW, there is another technology called emulation that is similar to virtualization, but in general is slower than virtualization. Emulation is used when the CPU required for the guest OS is different than what the physical host has. For example, if you wanted to run Windows on a PowerPC Mac. This is why the Mac changing to Intel CPUs was so exciting because it allowed the use of the faster virtualization technology for Macs to run Windows.
So the decision to use Boot Camp or virtualization depends on your needs. Me personally, I work with virtual machines daily due to my work with testing servers and such. With virtualization I am able to run several virtual machines simultaneously and so can simulate a whole network all within my Macbook. My work doesn't involve much graphics tasks with games, Photoshop, video, etc, so virtualization is fine. If your game is a FPS, then you probably wouldn't find virtualization acceptable. But "simple" games it may be fine. Virtualbox is free, but Parallels and Fusion sometimes do better with certain games. Parallels and Fusion have trial versions so you may want to try them as well. If you do, when you create the virtual machines, do NOT activate Windows until you're sure you're going to purchase. The various products do NOT use the same file format so converting a virtual machine to another format is tricky. If you do activate Windows, then decide to use a different product but are unable to convert the virtual machine, it's not a big deal to call Microsoft for the reactivation, but it is inconvenient, so better to avoid activation until you're sure.

Installing Windows 7 Ultimate on Lion/Bootcamp 4/Mac Pro (before 2008)

I'm currently trying to install windows (described in title). Everything works fine until the windows intallation gets to the last step. It restarts the computer to run the configuration which causes a blue screen of death to appear and disappear so fast I can't read it. I've been poking around to see if there are any solutions but I haven't really seen anything helpful. The closest I've seen has been to rename the apple drivers bootcamp installs (or something like that) but when searching the file system I can't find the ones mentioned. Also this compy has a 2 x 2.66 GHz Dual-Core Intel Xeon processor with 2GB 667 MHz DDR2 FB-DIMM ... and was purchased around 2007/2008. Thanks all.

Windows 7 64-bit requires UEFI, which means Mac Pro 3,1 Early 2008.
That is what Microsoft supports for UEFI and GPT on 64-bit OS, www.uefi.org group, Intel, Apple and other partners.
And the ROM yu have is 32-bit and too small for that. UEFI didnt' exist until two years after the MacPro line debut.
So the easy way: install Wndows on a PC to get it started, don't update, then insert drive into Mac Pro and continue from there. That is the easy route.
You actually should, with 64-bit DVD, get an error message:
Select CD ROM 1 or 2
http://www.bing.com/search?q=select+cd-rom+boot+type+windows+7+boot+camp
I had Windows 7 evaluation copy, on my computer, which was expiring. Bought the Windows 7 Home premium and put the disk in the CD-Rom drive, and started my computer. Got the "Select CD-Rom Boot Type" prompt with the options "1" and "2", with no descriptions for either one. I entered the number '1' and my computer started with the evaluation copy (tried '2' as well). Finally, I started the computer again and entered the number '3'. Installation process for my Windows 7 home premium started.
Someone put this help tip and it should be useful, but does require Windows, and it is easy to install Windows from ISO or DVD into a VM whereas native install fails.
Again, you only need Apple drivers, not Boot Camp Assistant to partition etc and you do need to put the Windows drive in bay #1 or #2 while removing all other drives (external as well).
Try typing "3" though if you get the "Select CD" prompt first, seems Microsoft has for years had an issue with their loader is not ISO9660-compliant.
http://www.imgburn.com/index.php?act=download
http://www.virtualbox.org/
And if it was my Mac, I'd download Windows 8 Preview on the 29th (well, wait a couple days for the server to catch up as it will probably get million downloads a day). Unless you have access to Windows 7 through work or MSDN.
You only need to buy System Builder Windows 7 64-bit Pro - Pro to use both processors in your system.
And normally installing 32-bit version is a piece of cake. and from in there you can install 64-bit in another partition on same hard drive without having to boot off DVD.
I think you created the DVD with Disk Utility and that is why it doesn't work. No?
http://msdn.microsoft.com/en-us/windows/apps/br229516

Can someone walk me through a step by step process to boot camp OS X 10.9.2 to install Windows 7 (I have the physical disk for Windows 7)?

Can someone walk me through a step by step process to boot camp OS X 10.9.2 to install Windows 7 (I have the physical disk for Windows 7)?
I've been reading many forums and watching tutorial videos but still very confused as to what to do...I'm afraid to mess things up.
Thanks!

Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp 5.1- Frequently asked questions
Boot Camp Help- Overview of Boot Camp setup
10.8 Boot Camp Manual

Installing windows 7 on second hard drive in macbook pro 7

Dear fellow forumers. I am currently having trouble installing windows 7 on my second hard disk as whenever I restart my laptop after the bootcamp assistant has made a partition in the HDD, instead of going into windows installation, my laptop screen shows a blank/black screen with a blinking dash at the top corner. I am currently using a 15" macbook pro 2011, installed an OWC ssd as my primary hard drive where I run my os Lion and windows (in another partition). Due to insufficient disk space with the applications in both OS, i am now attempting to install a second windows 7 in a second hard drive which I split the HDD equally into two partitions (one formatted for windows installation and the other for data storage). Just for the information, I am also installing the windows 7 via an external optical drive.
I have been running out of wits as I have been researching whole night about possible oslution but it seems that my problem is quite a peculiar one. Will really appreciat any help that I could receive.
lastly, is it possible to run parallel desktop from my ssd (Primary hard drive) and then attempt to import the bootcamp from my second hard drive?

Well it's not particularly hard, I just don't see why its necessary. It seems silly that I've got to physically start removing hardware from my computer just to get an OS to install on a specific drive.
I was under the impression the Boot Camp gave the option of where to install Windows, as in other drives from the ones with OSX on them.

Can I install Windows 7 System Builder Addition on a MacBook Pro?

Can I install Windows 7 System Builder Addition on a MacBook Pro?

rmsmac,
do you mean Addition, or Edition? Is it a 32-bit version of Windows 7, or a 64-bit version of Windows 7?
Why don’t you give it a try, and report back on whether you’re able to or not?

HT201456 I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc.

I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc. When I get the the choice of partitions to install Windows 8.1 on the Windows installer says that the Bootcamp partition is not valid.
Has anyone encountered the same issue?

BCA creates the partition as FAT, which the installer needs to format.
Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 for reference. Where does it break in your case?

Installing Windows 8 and or Windows 8.1 on a late 2013 Mac Pro

Been unable to install Windows 8 or Windows 8.1 on my brand-new Mac pro late 2013. The install ends with this error message
Installation was canceled
Any changes made to your computer won't be saved.
" Windows could not update the computers boot configuration. Installation cannot proceed" followed by A shutdown.
Anyone have any ideas or solutions?

Problem Solved....
Mac Pro (Late 2013): \"Boot Configuration\" alert when installing Windows 8

I intended to install windows on my macbook, but I removed Mac os X wrongly! Now I don't know how to install Mac again please help me.

I intended to install windows on my macbook, but I removed Mac os X wrongly! Now I don't know how to install Mac again please help me.

I still don't know which version of OSX you have but assuming it's 10.7 or 10.8 .....
You need to press command-R (at the sound of the chime) to get into recovery, try that, if it does not work try command-option-R for Internet Recovery.

Can't install montain lion, mavericks or yosemite on my mac pro early 2008 8core

I tried installing mountain lion mavericks and yosemite on my mac pro early 2008 I upgraded the video card to see if that was the problems and still the same the problem is that after installing even during install the mouse moves super slow and the keyboard won't work at all so I can't entern
any information this is with a clean install and even if I update lion it does the same everything works fine on lion 10.7.5 problems there does any one know what could be the issue here? I'm only running one monitor and its the 30 inch cinema display here are the specst of my machine excuse my grammar and spelling it was never my favorite subject
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Serial Number (system): G881111VXYK
Hardware UUID: 714C0BE4-9A35-5C33-BF74-0F55F7C31B5F
AMD Radeon HD 6870:
Chipset Model: AMD Radeon HD 6870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6738
Revision ID: 0x0000
ROM Revision: 007-NETKAS-ORG
EFI Driver Version: 01.00.507
Displays:
Cinema HD:
Display Type: LCD
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: CY03018WXMP
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01431026
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5935
Serial Number: 0x57656411
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172313
DIMM Riser A/DIMM 4:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172714
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

Bootcamp and Windows 7 and 8 on the new Mac Pro (Dec 2013)

I want to install bootcamp on my new Mac Pro (Dec 2013).
Bootcamp says it supports Windows 7 and 8, but there is a bunch of new hardware with the new Mac Pro, so I am concerned about bootcamp support for it.
Are there any issues with Windows 7 Pro install? How about Windows 8 Pro?

From what I see, only Windows 8 is supported on the new Mac Pro (Late 2013) with Bootcamp.
See Boot Camp: System requirements for Microsoft Windows operating systems
Look under Boot Camp requirements by Mac model
Mac Pro
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
Mac Pro (Late 2013)
BCA
"BCA" indicates that Boot Camp drivers are automatically downloaded as part of the Boot Camp Assistant in OS X, for 2013 or later models of Mac computers.

After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
Step 1
When prompted for the password, check the box marked Remember this password in my keychain.
Step 2
Check that the keychain is working.
Step 3
Check that the default keychain is unlocked.

After installing iTunes 12.1.2.27 on my Mac Pro 6-cores, my Mac freeze and boot again. Why?

After installing iTunes 12.1.2.27 on my Mac Pro 6-cores, my Mac freeze and boot again, and I cannot use iTunes. Can anybody help?
How can install an older version? (I use OS X 10.10.3)

I have the same problem. any help from any one please? thank you

Change start up disk Mac Pro 2008

I have installed a new 1TB SSHD but presently my Mac Pro still recognises the old start up. How do I rectify this. The old 500GB was slowing down.

SSD or SSD + HDD? Formatted? Installed or cloned?
Have you already cloned it?
Install TRIM Enabler first, then clone.
Also you used an adapter to fit it into the drive bay.
Booting from PCIe SSD controllers on a 3,1 is usually not worth the trouble and cost or reliability (great for scratch and data libraries though)
Best choice - buy Carbon Copy Cloner, shown to be reliable; create a Recovery partition, can verify copies.

Installing Windows 7 64 Bit Upgrade on a Multi-disk Mac Pro

Similar Messages

Maybe you are looking for