Integrate documents from ecc into the enterprise portal

Hai sir,
i want to display the backend ecc files into the portal how to do it. can we proceed with KM Iview to display the backend files.
Thanks!
Ram

Hi Ram,
No, Its not Possible Thru KM. Because,
If u want display KM data in Portal, That document should be there in KM repository.
I think U can display backend Doc thru only coding.
Polaka

Similar Messages

Save document from word into sharepoint library does not work !

Hi,
I'm trying to resolve a problem that i have with word and my sharepoint website.
Some of my users have to open and RDP session on a windows 2008 server and work from there. They open their session with their credential and they do everything they do in local on sharepoint using IE.
BUT, we have always and ever had an issue on this server as they c'ant save a document (Word or Excel) from office. They have to upload it from sharepoint uising IE. In example, i want to save my document from word into the sharepoint document library I have
this error message :
"Windows doesn't find (http://intranet.sharepoint.com/DocumentLibrary/). Check and retry".
If I open my sharepoint site and i upload the document it works perfectly. Also if I open and edit an existing document from any library it will work with word. The problem seems to happen when i want to browse sharepoint from word for saving files...
As this server is a windows 2008, IE version is 9 and the office version is the same as on all computers (Office 2010 SP2 32Bit)
Any help would by appreciated
Regards

Hi,
I understand you encountered the issue when save document from Office client application to SharePoint 2010 site.
Is there any Proxy settings in networking side? Please bring up IE > Internet options > Connections > Lan settings. If so, please uncheck options in Proxy server and test the issue again.
If you have deploy GPO to add SharePoint site into Trusted sites, please check if there is any other GP associated with trusted sites that might affect the issue. You could also remove it from Trusted sites via IE options and test the issue again.
In addition, please provide more error message to help narrow down the issue, you could locate error information in Event log at least.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Portal Component receives GET from other app out of the Enterprise Portal?

Hello.
I want to design a portal component, to which i can send GET-Parameters via URL.
The sending application runs out of the enterprise Portal and has a simple HTML-form (The portal component generates HTML and JAVA-Script for a Flex Application in the Enterprise Portal which should point to a specific document named in the params. The params will be written into the generated HTML document after calling).
Is this possible without authetification and how would the URL looks like, which is used to call the enterprise portal?
Pls help me.
With best regards
Edited by: Björn Karpenstein on Aug 15, 2008 11:02 AM
Edited by: Björn Karpenstein on Aug 15, 2008 11:03 AM
Edited by: Björn Karpenstein on Aug 15, 2008 11:05 AM

Hi Björn,
you can access request parameters with the following code in the standard methods of your Portal Component:
          // IPortalComponentRequest request;
          request.getServletRequest().getParameter("ParamName");
The direct URL of your Portal Component without a specific iView is:
http://
If your component should be directly accessable without authentication you must add the following property in your portalapp.xml in the the component-profile section:
      <component-profile>
        <property name="AuthScheme" value="anonymous"></property>
      </component-profile>
Best regards,
Stefan Brauneis

Upgradng the enterprise portal from non HA to HA

Dear Experts,
We have Enterprise portal 7.01 on windows 2003 with db2 9.1. and 1 dialog instance. presently it is not in HA. We want to change this to HA using MSCS.
Can any body share some knowledge on this. How to change the existing system.
thanks alot

Hi,
I must want to correct this question as
" Migrating the enterprise portal from non HA to HA".
The only option i can see is reinstallation or i mean to say system copy to new HA system.
Yoy have to plan your connectivity issues in case you are going to change hostname,IP etc.
Steps:
1) Install Fresh HA EP system
2) Take export from source EP system and DB backup
3) Perform system copy steps on new system
4) In case host name is changed , inform the respective interfac eowners.
Hope this will help you to plan better.
Regards,
Gagan Deep Kaushal

How do I copy a document from pages into email (not pdf) and have color and format the same as the document created in pages?

How do I copy an entire document from pages into email (not pdf) and have color and format the same as the document created in pages?

Pages ’09 v4.3 and Pages v5.2.2 are entirely different document architectures. Consequently, copying and pasting a table from Pages ’09 circumvents the customary translation process that would occur if you opened that Pages ’09 document in Pages v5.
Make a backup copy of the Pages ’09 document that has the table in it, and then open this document in Pages v5.2.2. The table is translated into Pages v5 document format and displayed correctly. You can even select this Pages v5.2.2 table, and then copy/paste it into another Pages v5.2.2 document with accurate results.

Which licenses do I need for the Enterprise Portal from Dynamics AX R2 2012

Dear Community,
some time ago i heard about the Enterprise Portal, which requires a SharePoint 2013 and a Dynamics AX R2 2012 Server.
My company has a fully licensed SharePoint 2013 Enterprise Server and enough CALs. We also have a Dynamics AX 2009 Server running.
Now to my question: What licenses are needed to get a Enterprise Portal with Dynamics AX 2012?
Thanks for your responses.
Sincerely ShareBear9280

Hi ShareBear,
According to your description, my understanding is that you want to know which licenses needed for the Enterprise Portal from Dynamics AX 2012 R2.
There are 4 types of user CALs in Dynamics AX 2012 R2 - Enterprise, Functional, Task, and Self Serve. The number of CALs needed is related to who these users are and what they do.
More information, please refer to the link:
http://community.dynamics.com/ax/f/33/t/114710.aspx
For this issue, I recommend you can post your question to the forum for Microsoft Dynamics AX:
http://community.dynamics.com/ax/f/33.aspx .More experts will assist you, then you will get more information relation to Microsoft Dynamics AX.
Thank you for your understanding and support.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

WebDynpro ABAP integrated into the NetWeaver Portal - One for Mr Jung :)

Hi
<h2>Introduction</h2>
I've developed a WebDynpro Component that uses 8 other components.
The initial component has 1 view with a PhaseIndicator element with 8 phases.
Selecting a phase pops up a window of the appropriate components used as usage components.
Also, depending on certain config tables some windows might popup as soon as the application runs.
I've created an application for the component with the PhaseIndicator.
<h4>The application works perfectly !</h4>
<h2>Problem</h2>
<h4>When I integrate the application into the NetWeaver Portal it also works perfectly, in Dev that is.</h4>
When moving the application and all it's components to QA it also works perfectly if run on it's own. But, when embedded in an iview in the Portal, strange things happen
All the components that are usage components in the 1st component is displayed in the first window but not as pop ups.
They are all listed below each other with plenty of white space between them, below each other in one huge scrollable window.
<h2>My Investigations</h2>
I've run a trace in Dev and QA and discovered that just before the Windows are displayed different code is run in the two systems. In Dev, the system executes a method of the class CL_WDR_SSR_LS but in QA the system executes the contructor class of a local method lcl_repository in the include LWDR_RUNTIME_REPOSITORYF12.
<h2>Things I've tried - but did not work</h2>
1) Removed my custom theme.
2) Re-transported everything.
3) Bounced the QA Portal
4) Transported everything to Prod - It works perfectly in and out of the Prod system and Portal. BTW The ECC system of QA was refreshed from Prod 2 weeks ago.
<h2>Finally - My Question</h2>
What the bleep do I do now
Thank you for reading.

Hi Bala,
thank you. This solved my problem.
Could you explain what the caused the problem?
Best regards,
Olaf

How to bind an IIS to the enterprise portal installed on a linux machine

Dear all,
I am very new to the topic of Enterprise Portal.
Our intention is, to develop .NET IViews and deploy them in the Enterprise Portal.
The Enterprise Portal Server is set up on a linux machine.
The Guy who did install the Portal Server, has no idea how to "integrate" the Microsoft IIS to the Portal.
After deploying my .net Component, i tried to view this component in the portal (by right clicking the mouse on the Component in in the .NET Solutions Explorer).
This gives me the following error:
Portal Runtime Error
An exception occured while processing a request for:
iView:N/A
Component Name: N/A
Could not find portal application com.sap.portal.dotnet.framework.
Exception id: 02:06.......
See the details for the exception ID in the log file
I think that this has something in common with integrating the IIS on the Linux Machine, and maybe additionaly installing the pdk.net on the IIS webserver machine which should be used.
Thank you for your help.
Regards

Hi,
Welcome to the world of Enterprise portal
Seems to me like you are trying to use the PDK for .NET. If so - Please read the overview section in the documentation to get a general idea of how it works (for example - IIS is not used at all!).
See the Visual Studio integrated help or click this https://media.sdn.sap.com/html/submitted_docs/dotnet/index.htm
there go to "Getting Started" and mostly "Overview".
Anyway, It seems like the problem is that you didn't deploy the 2 required SDA's to the portal. You should also take a look at the "installation and configuration" guide. Download it here: https://www.sdn.sap.com/sdn/developerareas/dotnet.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/pdk for .net administrator guides.zip
Good luck,
Ofer

If the Enterprise Portal have a default page for creating a blog?

Hello!
   I want to know if the Enterprise Portal have a default page for creating something like a blog, with personal information, comments...
   can I using the tool XML Form Builder or something else?
   Thank
   lexian

Hi Lexian,
I don't believe the Portal currently has any tool that can be used conveniently to create blog type content.
You are right, you could potentially use the XML Forms Builder to create a form which might just about do what you want it to, but this would be very fiddley and is not really designed for this purpose.
If you can wait, you should use the WebPage Composer that is due to released in the Portal from April.
Here at SDN we are currently looking into using it to display our blogs and I must say research is looking good so far.
Regards,
Marc

BW Workbook as an iView in the Enterprise Portal

I keeping getting a dialog box asking to select the appropriate program to open the workbook. When I select .xls it opens, and it shows the parameters I entered and not the workbook. The customer is on NW04 Stack 11.
I followed ever step on help.sap.com site as listed below.
BW workbooks are MS Excel workbooks with one or more embedded BW queries. You are able to display these workbooks in the Enterprise Portal as iViews.
Features
Workbooks are displayed in a separate MS Excel window. Opening workbooks within the Web browser window is not possible for technical reasons.
BW workbooks require the BEx Analyzer, which requires a local installation of the SAP GUI for Windows with the BW front end.
SAP recommends that you use BEx Web applications in the Enterprise Portal that run completely in the Web browser.
You can use the function Export as Excel 2000 File from the BW Web application context menu as an alternative to using a local installation of the BW front end if you require Excel functions. See Context Menu Functions and Exporting as a CSV File/Excel 2000 File.
An iView with a workbook can be generated using the Portal Content Studio or Role Upload. For more information, see Generating Content from SAP BW for the Enterprise Portal.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.appintegrator.sap.Transaction.
The most important properties are System, Transaction (TCODE) and ApplicationParameter.
·The System property contains the alias on the BW system (see Creating BW Systems in the Portal).
·The transaction code for every workbook is RRMXP.
·The value WBID= is in the ApplicationParameter property.
You can determine the workbook ID with the BEx Analyzer:
a. Open the desired workbook.
b. In the BEx toolbar, choose ® OLAP Functions for Active Cells ® Properties. The Information tab page contains the Workbook ID (Server).
Note that with BW workbooks as an iView, the AutoStart property contains the value True (process first screen) and the GuiType property contains the value WinGui.
Anyone have a solution for this to work?
Thanks,
-Eli

Dear Rasmesh,
Please try to do this suggestion:
3. How can I use SAP Application Integrator to access SAP transactions?
There are two different ways to use the SAP Application Integrator transaction iView. In both cases please use a URL like 'irj://com.sap.portal.appintegrator.sap.Transaction' followed by your custom parameters like '?System=DEV&TCode=SE38&GuiType=WinGui &WinGui_Type=Shortcut&OkCode=SHOP'.
The parameters are:
System [mandatory]
TCode [mandatory]
GuiType (=WinGui / WebGui / JavaGui) [mandatory]
WinGui_Type (=Shortcut ..if you want to launch the GUI in a new window)
OkCode (The OkCode that you would like to be executed after the transcation is called by SAP GUI.)
ApplicationParameter (Pass these values to your screen fields which needs to be be separated by
AutoStart (true / false)
UseSPO1 (true / false)
For a complete list of parameters please consult http://help.sap.com.
Taken of:
http://www.sweetlets.com/my_favorites_faq.html
I hope this highline can help you,
Luis

Webinar: Change Management and Transport in the Enterprise Portal

<b>SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT</b>
On Wednesday 21 July, Scott Jones hosts the webinar titled <b>Change Management and Transport in the Enterprise Portal</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
<b>How to Participate</b>
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
<b>About the SAP NetWeaver Know-How Webinar Series</b>
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
<b>Disclaimer</b>
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

Windows Applications in the Enterprise Portal

Hi all,
we have EP 6.0 SP10 based on NW04 installed.
Is there any possibility to integrate Windows Apllications
(Windows 'exe' files) in the Enterprise Portal.
Best regards

With LaunchInIE you use JavaScript to launch the actual applications. What we do is write a Java iView that contains links (we use icons) to programs installed locally on each machine. When the user clicks a link (icon) we run the JavaScript that opens the locally installed 'exe' file.
If you have a look at the WhirlyWiryWeb link posted earlier you can see how to use LaunchInIE.
The downside to this is that the .dll has to be installed on each machine and the registry (for each machine) has to be maintained.
You can just write a java iView that has links to locally installed exe's (file://C:/myfolder/myexe.exe) if you like but that will result in a security warning each time. LaunchInIE stops the security warning.

Use HCM processes and Forms without using the Enterprise Portal

is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
1) Create an Adobe form and Interface using SFP
2) Set up ISR and Form Scenario
3) Set up Forms configuration to use existing Backend and generic Services
4) Set up workflow to updated Backend using Services
is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
Any ideas will be greatly appreciated.
Thanks,
Saurabh

Hi Saurabh,
your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
Best Regards
Michael Bonrat - Solution Manager HCM Processes and Forms
Info about HCM Processes and Forms:
www.service.sap.com/erp:
- SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

Difference between using the Enterprise Portal and SAP GUI

Hi Gurus,
Could one of you please send me a document that lists the differences between the Enterprise Portal and SAP GUI?
thanks in advance

Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Testing the enterprise portal in integration with documentum.

hi
can any one plz tell me how to test the enterprise portal when it is integrated with the documentum(content server).in order to check how the data is flowing from documentum to sap portal.
regards,
babu.

Have a look
test the system alias connection.If it is successful , then it will work.
https://www.sdn.sap.com/irj/scn/thread?messageID=977224
Koti Reddy

Integrate documents from ecc into the enterprise portal

Similar Messages

Maybe you are looking for