Integrate websphere with iplanet

How to integrate websphere with iplanet?

Ask a vague question, get a vague answer.
Answer:
wiepblsapnheetre
There, the two words 'websphere' and 'iplanet' are integrated.

Similar Messages

Does anyone integrate siteminder with iPlanet Portal Server

I am trying to integrate iPlanet and Siteminder using the secure access pack. Has anyone successfully integrated the two?

yes,
we did basic integration where the authentication will be done using siteminder. The trick is to protect the portal server web server and not the gateway. You also need to add a new authentication module for siteminder in the portal using ipsadmin. We are protecting the login html page only. We couldn't protect the desktop because it's built using servlets.

HOW TO INTEGRATE OID WITH iPlanet

Hi All,
Can any one of you send me the link which shows the Integration with OID and iPlanet
Regards
Kumar

Below are some pointers which can get you started -
http://download.oracle.com/docs/cd/B10501_01/network.920/a96574/odip_ipl.htm
Metalink Note: 268341.1
213033.1
Also, try using Oracle's DipTester...It'll come in very handy...

How to integrate Websphere MQ as an external JMS Provider?

Hello to all!
I'm trying to integrate Websphere MQ in SAP Web AS 6.40 as an external JMS provider and I'm having some problems. As the use of SAP XI is impossible for me, I started using the built-in JMS Connector.
I've already read (and tried to follow) the documentation in http://help.sap.com/saphelp_nw04/helpdata/en/cd/4d4941abbb4c0de10000000a1550b0/frameset.htm, but unfortunately, it didn't help me that much.
It told me that the JMS Connector is the right place to start, and I already managed to deploy and define the Websphere MQ JMS implementation as a library. And from various examples I'm quite sure that Websphere MQ is an JNDI based JMS provider. But now the problems start.
According to the SAP library mentioned above, I have to enter the JNDI name to the ConnectionFactory in the "New ConnectionFactory" dialogue in the "Provider" tab. As an example there is the (existing) JNDI name "jmsfactory/default/TopicConnection". For doing the same with my Websphere MQ, I expect to need something alike.
Hoping that I'm getting the SAP library right at this point, I'm expecting to need a JNDI entry, like, let's say, "jmsfactory/WebsphereMQ/QueueConnection" connected to the class "com.ibm.mq.jms.MQConnectionFactory" (MQConnectionFactory is the class in the MQ JMS implementation that implements the JMS interface "Connection Factory"). How can I put those Websphere MQ classes, that are implementing the JMS interfaces like Connection Factory, QueueConnectionFactory and so on
in my JNDI tree? The point is, obviously, no JNDI entry was made during deploying Websphere MQ as a library.
Or am I totally wrong an misunderstood the SAP library completely? Any help on this topic would be highly appreciated.
Best greetings!
Bärbel

Integrating WebSphereMQ with SAP Web Application Server
Prerequisites
The native libraries of WebSphereMQ must be added to the environment variables of the host or hosts where the SAP Web AS is running. Typically, if MQ is installed on the same host, the required entries are added to the environment at installation. However, we recommend that you check the MQ documentation for details about the directory where the libraries are located, and make sure it is added to the environment on all hosts with SAP Web AS.
For example, for Windows OS the following libraries are required:
-     amqmtmgr.dll
-     amqvwaa2.dll
-     amqxcs2.dll
-     amqxcsn.dll
-     amqzc.dll
-     amqzsai.dll
-     amqzst.dll
-     amqztm.dll
-     mqjbdf02.dll
-     mqjbnd05.dll
-     mqm.dll
-     mqmvxd.dll
-     mqmxa.dll
-     MQXAi02.dll
Procedure
1)     If the version of the SAP Web AS is SP 7 or lower, you must apply a patch for the JMS Connector Service. The required SDA is attached to this e-mail (jmsconnector.sda). To apply it:
a.     Run the SDM Remote GUI tool. It is located in <SAP_install_dir>\SAPSID\<Instance_ID>\SDM\program.
b.     In the Deployment tab, add the jmsconnector.sda to the deployment list. Choose   Show Deployment Configuration. Select Update deployed SDAs/SCAs that have any version (this ensures that you will have the SDA deployed even if for some reason its timestamp is older than the one of the SP7 SDA that you already have deployed.)
c.     Deploy the SDA following the standard deployment procedure. If prompted to choose if you want to delegate the control to the SDM server, choose Yes. The SDM shuts down the cluster, deploys the SDA, and then restarts the cluster.
2)     Create the IBM MQ library. You can do it using either Visual Administrator or SAP NetWeaver Developer Studio.
a.     Visual Administrator:
i.     Go to Services -> JMS Connector.
ii.     Select JMS Libraries, and choose New.
iii.     Enter a name for the library, such as MQJMSLIB.
iv.     Browse to select the following JAR files:
- com.ibm.mq.jar
- com.ibm.mqbind.jar
- com.ibm.mqjms.jar
- fscontext.jar
- ldap.jar
- postcard.jar
- provider.xml
- providerutil.jar
v.     Deploy the library.
vi.     Go to Services -> Configuration Adapter. In the configuration tree on the right-hand side of the screen browse to cluster_data -> server -> cfg -> ext -> MQJMSLIB-provider.xml. Switch to edit mode using . Open the XML for editing using . Add the following entry (after the reference entry for jms):
<reference type="library" strength="weak">j2eeca</reference>
Choose OK and restart the cluster to apply the changes.
b.     SAP NetWeaver Developer Studio:
i.     Create a J2EE Library project.
ii.     Select the project and choose File -> Import -> File System. Browse to the MQ folder, which contains the JAR files listed above, and select to import them.
iii.     Extend the tree of your library project and open server/provider.xml. Go to the Jars tab.
iv.     Select Jars, and choose Add. Choose to add the JAR files that you have imported in the previous step.
v.     Go to the References tab. Select References, and choose Add. Choose Select library/interface/service. In the list select jms and j2eeca.
vi.     Save and close provider.xml. From the context menu of the library project choose Build Library Archive.
vii.     Select the SDA in the project tree, open its context menu, and choose Deploy to J2EE Engine.
3)     Create a JMS Connector Factory in Visual Administrator.
You can either enter the required values directly in the Visual Administrator (Services -> JMS Connector), or you can edit the following sample deployment descriptors and import them in Visual Administrator using .
a.     Using JNDI:
This is example of factories.xml using JNDI based JMS provider.
<?xml version="1.0" encoding="UTF-8" ?>
<jms-factories>
    <application-name>
      IBM_Test_App
    </application-name>
    <connection-factory>
      <library-name>
        MQJMSLIB
      </library-name>
      <factory-name>
        IBM_Queue_Factory
      </factory-name>
      <context-factory-type>
<!This factory should already exist on WebSphereMQ.-->
        <link-factory-name>
          QCF_1
        </link-factory-name>
        <initial-context-factory>
          com.sun.jndi.fscontext.RefFSContextFactory
        </initial-context-factory>
        <provider-url>
          file:/C:/JNDI-Directory
        </provider-url>
        <security-principal>
        </security-principal>
        <security-credentials>
        </security-credentials>
      </context-factory-type>
    </connection-factory>
</jms-factories>
b.     Using object factory JMS provider
<?xml version="1.0" encoding="UTF-8" ?>
<jms-factories>
    <application-name>
      IBM_Test_App
    </application-name>
    <connection-factory>
      <library-name>
        MQJMSLIB
      </library-name>
      <factory-name>
        IBM_Queue_Factory
      </factory-name>
      <object-factory-type>
        <object-factory-name>
          com.ibm.mq.jms.MQXAQueueConnectionFactoryFactory
        </object-factory-name>
        <class-name>
          com.ibm.mq.jms.MQXAQueueConnectionFactory
        </class-name>
        <properties>
          <property>
            <property-name>
              HOST
            </property-name>

            <property-value>
              localhost
            </property-value>
          </property>
          <property>
            <property-name>
              QMGR
            </property-name>

            <property-value>
              MQ_default
            </property-value>
          </property>
          <property>
            <property-name>
              PORT
            </property-name>

            <property-value>
              1414
            </property-value>
          </property>
          <property>
            <property-name>
              TRAN
            </property-name>

            <property-value>
              1
            </property-value>
          </property>
        </properties>
      </object-factory-type>
    </connection-factory>
</jms-factories>
4)     Use the connection factory in an application:
Code:
Context ctx = new InitialContext();
Object ref = ctx.lookup("java:comp/env/IBM_Queue_Factory");
QueueConnectionFactory f = (QueueConnectionFactory)ref;
QueueConnection connection = f.createQueueConnection();
Resource references:
                 <resource-ref>
          <res-ref-name>
            IBM_Queue_Factory
          </res-ref-name>
          <res-type>
            javax.jms.QueueConnectionFactory
          </res-type>
          <res-auth>
            Container
          </res-auth>
        </resource-ref>
If you are using 6.40 SP7 or below let me know to send you a patch.
Regards Nikola

How to integrate MQSeries with Oracle BPM Studio 10.3.0.0.0

Recently I received one requirement which is integrate MQSeries with Oracle BPM Studio 10.3.0.0.0,
Please help me on this configuration any one who aware.

We just finsihed a BPM 6.0.4 project that integrates with IBM Websphere MQ 6.0.
There are many, many steps that are needed to be done in order to integrate but it works very well.
If you email me at [email protected] I will send you what I have.

Oracle Reports Integration with iPlanet Application/Web Server

Do any body know if we can integrate Oracle Reports with iPlanet Application Server or Web Server?

Theoretically yes, in Reports 6i there is either a CGI or servlet to set up, in 9i there is a servlet interface.
In practice through this is not simple, at least in the 9i case, and with Oracle 9iAS a reports server comes configured out of the box.
Regards,
Danny

Steps to integrate ATG with siebel.

What are Steps to integrate ATG with siebel?

Refer to this thread on the same topic
ATG Siebel Integration

How to Configure and Integrate EP with CRM

Hi Everybody,
I want to integrate EP with CRM.
I am using SAP WAS Server.I have installed Portal.
I downloaded CRM Business packages.
1)How to integrate and configure in the EP with SAP R/3(CRM Module).
2)What are the prerequisities.
Plaese prove the exact help and documents.

Hello,
I think this <a href="http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N12_Scen_InstallGuide_EN_US.doc">Scenario Installation Guide</a> from the <a href="http://help.sap.com/bp_epv260/EP_EN/index.htm">SAP Best Practices for Enterprise Portal V2.60</a> can help you.
Regards
Gregor

Is it possible to Integrate dos with Java to create a sample compiler?

Is it possible to Integrate dos with Java to create a sample compiler, or do I have to write the compiler from scratch? In theory, I would like to have users enter sample code in a java text field, hit a java button that would compile/run the code, by calling a dos command prompt that would run it, and display any error messages back to the java text field. Does anyone know if this is possible? Any help would be greatly appreciated.
Tflav23

There is a Compiler class you might be able to use also:
C:\jdk1.3.1_01\docs\api\java\lang\Compiler.html
So perhaps there is no need to create a process to compile code. But I don't know if you can get information about compiler errors.

How to integrate DRM with third party tool for loading metadata in SQL table

Experts,
I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
Is there anyway we can customize DRM to execute queries or run batch
Can I have a basic example please.
Thanks in advance,
Regards,

1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
let me know if you have any issues.

How to integrate iReceivables with third party payment system?

Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
Sunita

Hello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

WebDAv with Iplanet Webserver 4.1

Hi,
I want use Webdav with Iplanet Webserver 4.1 for publication . It's
possible ?
Regards,
herve

I tried this with apache slide.
With no luck.
I think the problem was due to not being able to configure a servlet to
receive the http request for the urls from the web dav root.
For example.
http://mserver/dav
may be the root
then you would have a file at
http://mserver/dav/files/etc
I could not configure the servlet in the rules.properties file to say
/dav/* is servlets WebdavServlet.
However you can do this with tomcat and I hope now that iWS 6.0 supports the
web.xml for deploying servlets that you now will be able to do this.
If you get this working I would like to know how you did it.
Warwick
"herve Merdrignac" <[email protected]> wrote in message
news:[email protected]..
Hi,
I want use Webdav with Iplanet Webserver 4.1 for publication . It's
possible ?
Regards,
herve

Want to integrate JavaFX with JSF

Hi all,
I am developing a web application in JSF. I want to integrate it with JavaFX. Is it possible to do so? If possible then how can I achieve it?
Thanks in advance,
JSF GEEKS

Actually I found the same code for integrating JavaFX with JSF, which you have linked, but I show it afterwards. Anyways, thanks for your kind support.
The other interesting thing I found is, interaction between JavaFX and JSF.
You can interact between JavaFX and JSF like the following way.
You just give the id in the script in which you have defined the parameters of applet to run in browser with JSF or any language like this;
<ui:script id="js" type="text/javascript">
    javafx(
              archive: "Your_JAR_File.jar",
              draggable: true,
              width: 550,
              height: 370,
              code: "package_name.Main",
              name: "Name_of_Application/package_name",
id: "myJavaFX"
    </ui:script>Then uin the header part of your page (acually in <head>), you write another script something like below;
<script language="javascript" type="text/javascript">
function changeColor() {
myJavaFX.script.line1=myJavaFX.Packages.javafx.scene.paint.Color.WHITE;
myJavaFX.script.line2=myJavaFX.Packages.javafx.scene.paint.Color.LIGHTBLUE;
</script>Here line1+ & line2 are the variables of JavaFX script/program. So here, by this example I am changing the value of variables of JavaFX script to change the colors. myJavaFX {color:#333333} {color}is the id of the applet which I have given in the first script to generate and run the applet in browser.
so here I give you what I understood. Hope it helps.
Thanks,
JSF GEEKS
Edited by: jsfgeeks on Sep 17, 2009 10:59 AM
Edited by: jsfgeeks on Sep 17, 2009 11:02 AM
Edited by: jsfgeeks on Sep 17, 2009 11:03 AM
Edited by: jsfgeeks on Sep 17, 2009 11:04 AM

While integrating Weblogic server with Iplanet webserver

Hi ,
I am facing issues while connecting weblogic application server with Iplanet webserver:
while i hit the desired url, it showing the below log, it is not providing me proper page (weblogic console page )
Sat Mar 23 06:12:37 2013 <1535513639993579> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Sat Mar 23 06:12:37 2013 <1535513639993579> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Date]=[Sat, 23 Mar 2013 00:42:37 GMT]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Location]=[http://10.11.12.231/console/login/LoginForm.jsp]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[X-WebLogic-JVMID]=[-420809910]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Sat Mar 23 06:12:37 2013 <1535513639993579> parsed all headers OK
Sat Mar 23 06:12:37 2013 <1535513639993579> sendResponse() : uref_p->getStatus() = '302'
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[date]=[Sat, 23 Mar 2013 00:42:37 GMT]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[Location]=[http://10.11.12.231/console/login/LoginForm.jsp]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Sat Mar 23 06:12:37 2013 <1535513639993579> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Sat Mar 23 06:12:37 2013 <1535513639993579> closeConn: pooling for '10.11.12.231/7001'
Sat Mar 23 06:12:37 2013 <1535513639993579> request [console/] processed successfully..................
Please help me.
Thanks,
Chinna

Hi,
First thing are you seeing any request coming to weblogic server? if not then,
What configuration you have added in server.xml and virtual server instance object conf file for weblogic integration.
It is pretty straight forward,
1. add weblogic plugin libproxy_61.so in plugin/weblogic directory on webserver.
2. add WLS cluster server/ standalone server information in server.xml
3. in object file create a new object of type="magnus-internal/directory" add WL specific configuration and then add condition to select WLS object created or make it default object for handling all request.
Thanks,
Ranjan

How to integrate workflow with files?

Hi,I know I must configurate workflow before intetgrate
workflow with files.But ,there are some problems! when i configurate workflow ,there is no confirmation window when it finished. so when i configurate files with workflow,the system say there is no workflow scheme, so i can't integrate workflow with files.!
anybody any idea(in detail)? thanks a lot!
2003-7-29

Hi,
When workflow has been installed, it should definitely say that it was installed successfully.
Also for WF to integrate with files successfully there are several additional languages that need to be installed.
I have a good set of install notes for workflow. Email me at [email protected] and i will send them to you.
Thanks and Best Regards
Lynne

Integrate websphere with iplanet

Similar Messages

Maybe you are looking for