Integrating BPM 11g and BAM

Hi everyone,
I'm using Oracle SOA Suite PS4 (11.1.1.5) on Oracle Linux 6, 64-bit.
I have a simple BPM project, from which I want to send data to BAM to be able build a BAM dashboard.
I went through all neccessary steps:
1. I configured BAM adapter
2. I configured BPMN engine for BAM integration
3. I imported BAM Monitor Express
4. I configured BPM project (enabled BAM and provided JNDI,...)
I've repeated previous steps several times and I'm pretty sure that I didn't do any mistake. I also tried to restart servers, etc.
However, when I deploy the project the BI data object is not created as it should be and also when I create a new composite instace, the following errors occur in SOA server log:
1. Errror
Module     oracle.soa.bpmn.engine.sensor
Host     localhost.zeus
Host IP Address     193.2.72.73
User     <anonymous>
Thread ID     BAMActionMDB
ECID     d43c0affab89694f:5f271097:131e7a88bfd:-8000-0000000000001ced
Supplemental Detail     java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:19
2. Error
Module     oracle.soa.bpmn.engine.sensor
Host     localhost.zeus
Host IP Address     193.2.72.73
User     <anonymous>
Thread ID     BAMActionMDB
ECID     d43c0affab89694f:5f271097:131e7a88bfd:-8000-0000000000001ced
Message     Unable to invoke the webservice
Supplemental Detail     java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
3. Warning
Component     soa_server1
Module     oracle.bpm.analytics.bam
Host     localhost.zeus
Host IP Address     193.2.72.73
User     <anonymous>
Thread ID     BAMActionMDB
ECID     d43c0affab89694f:5f271097:131e7a88bfd:-8000-0000000000001ced
Message     failed on bamDataObjectCache.getBAMDataObjectBean(). Unable to find /Samples/Monitor Express/COMPONENT
There is no error on BAM server so it looks like the SOA server (BAM adapter) can't connect to BAM (java.net.ConnectException: Connection refused).
Can anyone help, please?
Regards,
Sonny

Hi,
I also had the same issue with 11.1.1.5. The data objects were not getting created. I manually created the data object using BAM Architect. And that solved my issue. I was able to see graphs in BAM.
However, 11.1.1.4 is working fine. It creates the data objects for BAM during deployment.

Similar Messages

BPM 11g and Webcenter integration

Hi, I have a lot of doubts about how to use BPM 11g 'inside' or integrated with Webcenter.
I need some tutorials, links and docs if possible.
thanks!

Did you try the product documentation?
http://download.oracle.com/docs/cd/E14571_01/soa.htm

BPM 11g and PAPI

Hello everyone,
Do you know if BPM 11g supports PAPI? I can't find information about this. Are there any alternative like PAPI?
Thank so much for any information.
Susan

Hi Chandu,
Were you able to close the same? If yes, please help me also...

Integrating BPM Composer and SOA Composer with Fusion

Hi
I am working on integration of BPM Composer or SOA Composer with Fusion. Any kind of help like documents etc would be very much appreciated.
Thanks

I don't believe that noone has ever tried to connect the local BPM environment to a remote WCC server before. Please let me know if you've ever experienced the same problem. Otherwise, even a simple "I tried to do the samething and I succeeded using the same steps in the tutorial" would help too .
Another thing is that yesterday, I talked to the tech-lead and I learned that our WCC server environment doesn't have BPM installed yet. I am wondering if this would cause the WCC server to not understand the request from my BPM server. In addtion, I've also upgraded my local BPM server using the lastest SOA bundled patch. Should the same patch be applied to the WCC server environment too?
I'd be very grateful for any advice .

Integrating 10g OSB and 11g BAM

Hi,
I was trying to put some data into BAM data object through OSB proxy and business service,but i am unable to connect to BAM.Can someone let me know how to connect to BAM data objects through a proxy or business service.
Thanks
Chandrachur

Check out this thread - Integration of OSB 11g and BAM
You might want to check this link as well - http://www.oracle.com/technetwork/middleware/bam/osb-bam.pdf?ssSourceSiteId=otnjp
Thanks,
Patrick

BPM 11g install and configuration with Webcenter

Hi,
I am new to this BPM so need some help in installation. Where can I download the latest version of BPM 11g and for installating it what steps do I need to follow. Also I need to integrate Webcenter also so for webcenter integration what do I need to install and configure with BPM 11g.
Do I need to install webcenter full suite for integration with BPM and if so can I install both BPM and webcenter in one home iteself. Where can I find some documentation arround installing BPM and configuring with Webcenter.
Thanks

Hi,
Need some info on the install I have to install both SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3 on the same box. I have installed the SOA BPM 11.1.1.3 but wanted to find out what is the best option of installing Webcenter 11.1.1.3 as I need to integrat SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3. Here is what I think are the options but don't know which one should I go for or is there any other option but the fact is I need to install both on the same box.
*1. Should I install Webcenter in a separate HOME in doing so I will end up installing weblogic again and then install webcenter. Will endup having two ORACLE HOMES one for SOA BPM and one for Webcenter.*
*2. OR should I install Webcenter in the same home as SOA BPM and create a new domain in doing so what happens to some of the components that are installed when installing SOA BPM.*
*3. OR should I just extend the SOA BPM Domain and have both SOA BPM and Webcenter installed in the same domain. I believe this will only add the webcenter components but don't know if there are any issues.*
And help is really appreciated..
Thanks

Send Mail in BPM 11g

Hi.
I´m using BPM 11g and i want to send mail to different roles.
Someone knows how to implement a service to send mail..?

Human tasks in 11g have some out of the box capabilities for notifications (email being one of the transport mechanisms). For details refer to the documentation:
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/bp_hwfmodel.htm#BABICIAH
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/bp_designtf.htm#CHDJBIDE
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10226/ns_config.htm#BABJFFAF
If the out of the box capabilities don't do what you need, then you can use the User Messaging Service API or javax.mail API to implement your custom functionality.
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/partpage_vii.htm#BCIHAJJI

Calling External Application from BPM 11g

I am new to BPM 11g and need to create the ability to call an external application (UCM) from within BPM. Will a web service adapter, with a type of Reference, accomplish this? How can I add security to this web service.
The second question is how can I add an adapter that alllows me to specify our own source code? In this scenario we would write the Java to formulate the SOAP call directly, thus allowing us to add the security into the call directly.
Any information is much appreciated.
Thanks,
Randy

Hi Randy,
You can call an external application using a spring component integration, I was just able to get that to work with a help from another forum member here is a viewlet that demos the spring integration:
http://bpel.us.oracle.com/BPM/11gR1/howtos/spring-component/oow-2010-Beijing-viewlet/springdemo_v2_viewlet_swf.html
Alex.

BPM 11g ids:getUsersInAppRole function

Hello,
I'm working on BPM 11g, and I'm trying to use the getUsersInAppRole function but it returns multiple nodes since there are more than one user in the role, then while trying to assign it to a XML list of strings it throws an exception. I think I should use a transformation to achieve the assignment, but what do I use as a source element since it is the result of a function and I don't know what type it returns?
thanks

Hi Josué,
Let me preface this by saying I'm not especially proud of this solution. It's a workaround to a bug (at least I think it is a bug) in 11.1.1.5.
Here are the steps I did. Let me know if one or more of these do not make sense.
1. Before entering the subprocess, I populate a 'parts' variable (a component variable that is a Types.Participants) from my method call (know you're using 'getUsersInAppRole' - I'm using a different method that returns this type). This stores the array of userObject (a Types.UserObjects type component).
2. Create the subprocess using the 'MultiInstance' loop characteristic and uncheck the 'Is Sequential' checkbox. For the subprocess's Loop Cardiality I used the XPath Expression
count(bpmn:getDataObject('parts')/ns:userObject)In the Completion Condition box, check the Use Expression checkbox and enter the XPath Expression
bpmn:getActivityInstanceAttribute('subprocess0', 'loopCounter') <= count(bpmn:getDataObject('parts')/ns:userObject)3. In the Arguments Definition tab, the incoming needs to be (in my case anyway) a variable of the type 'Types.UserObjects'. This means that you're passing in the whole array of users instead of a single userObject. The reason I had to do this is because when you click the arguments 'Use Associations' checkbox and edit it and click the Expression Builder icon, the loopCounter is not present in the list of available variables (the loopCounter variable is used by the subprocess to keep track of the loop count that you're currently on). Because it is not in the list, you cannot just pass in the single UserObject.
4. You can work around this problem by retrieving it using a Script activity (or using the incoming associations to any activity) and setting a 'part' variable (a variable of the type Types.UserObject) to
parts.userObject[loopCounter]It's odd that you can get the loopCounter variable everywhere inside the subprocess activity you need it except for inside the incoming Arguments Definition tab.
Hope this helps,
Dan

Question on BPM 11g Workflow Services

Hi,
There was no out of the box support feature which would enable the end users ( agents ) to fetch a work item one at a time from some queue . This allocation/fetch would be done on the basis of some algorithm ( SLA, Priority etc ) . We developed this custom feature through the APIs provided in BPM 10g - Process API ( aka PAPI ). Now we have to port this custom feature to Oracle BPM 11g and there is no equivalent support for PAPI available in BPM 11g . There is another API - workflow services , but we are not sure if it will support the same feature as we are struggling to get Oracle BPM 11g installed. Request you to kindly help us in identifying if the same functionality can be achieved in BPM 11g.
Regards,
CC

Hi Chandu,
Were you able to close the same? If yes, please help me also...

Call subprocesses dynamically at runtime in BPM 11g

Hi
I have a requirement of executing a subprocess from a main process. The challenge I am facing is that, the name of the sub process to be executed is going to be known at runtime.Following is my scenario:
I have a main process which gets an XML input and contains a context based on which a search is made on the DB. The DB has the mappings of the context and the sub process names.
Now how can I implement this in BPM 11g (Jdeveloper 11.1.1.3). Is there any functionality provided to call a subprocess at runtime?
Thanks in advance

I am sorry Kshama, you are using BPM 11g and I did not notice it.
I am using BPM 10g based on eclipse IDE and those instructions provided by Daniel was for this version. I am not able to suggest you how to perform similar actions in 11g but I guess that except for the interface, the rationale behind is still the same. Maybe you could read that thread and use it to help point yourself in the right direction within the documentation.
Hope someone else who knows better the 11g platform came to help you.
Bye,
Luca

Oracle Primavera P6 R8.1 and BPM 11g Integration

I am trying to find out if anyone has done any integration work between Oracle BPM/SOA 11g and P6 R8.1. Any documentation, slides, links, etc would be helpful.
Thanks.
-muktech

Dear muktech
Please try this link. I hope it will resolve your query.
http://download.oracle.com/docs/cd/E20686_01/English/Technical_Documentation/Oracle_BPM/P6_BPM_11g_Admin.pdf
Best regards
Mohamed Chargui

Primevera 6:Installation guide and Integration with Oracle BPM 11g

Hi All,
I working on BPM 11g. I want to integrate Primevera 6 v8.2 or higher version of Primevera with BPM 11g can any one help me out in this issue.I am unable to understand where to start from what i have to install first.
I have already working environment on BPM 11g now to integrate Primevera what i have start with.Please help me out to move forward.If one has worked on this who has any screenshots please send me

If your company has a maintenance contract with Oracle, you should be able to find more information in the Knowledge Base.

"Oracle BPM Suite 11g" and "Oracle SOA Suite 11g" components

Dear Friends,
I am very confusing about the "Oracle BPM suite 11g" and "Oracle SOA Suite 11g" and would like your help on explanation as the following :
I have learn that In order to use "Oracle BPM Suite 11g" require to have "Oracle SOA Suite 11g" components to install first. Does it means that :
1) When we buy "Oracle BPM Suite 11g" , we automatically get the "Oracle SOA Suite 11g" components as well ?
2) IS it correct that these " these Oracle SOA Suite 11g components" are included :
(a) Oracle BAM
(b) Oracle Business Rules
(c) Oracle BPEL Manager
(d) Oracle Service Bus
(e) Oracle Complex Event Processing
3) Do we have a right to use all of these components listed in (2) ?
4) Then the answers in (3) is "YES", then Is it correct when the customer buy the "Oracle BPM Suite 11g" , they no need to buy "Oracle SOA 11g" any more when they would like to implements that applications based on SOA in the future (without using BPM) ?
5) What IF , the customer would like to start with "Oracle SOA Suite 11g" product and decide to buy only Oracle SOA Suite 11g first ; then later on in the future they would like to implement BPM projects in the future. Can you upgrade "Oracle SOA Suite 11g" to include "Oracle BPM Sutie 11g" and pay only the price different ?
I hope you can help providing the answers to these questions. THank you very much in advance.
Best Regards
Pearapon S.

This is a question best answered by your Oracle reseller or Oracle account manager to give you all the details but I hope this brief answer helps:
- The Unified Business Process Management Suite (BPM Suite 11g) includes: BPM Studio, BPM Composer, BPMN Service Engine and Workflow Extensions, BPM Process Spaces, and BPM Process Analytics.
- BPM Suite 11g requires the licensing of SOA Suite 11g for Oracle Middleware which requires a license for WebLogic Suite.
- You can license SOA Suite 11g now and license BPM Suite 11g later.
Since the products are layered, I don't see this cutting into SOA sales at all. My personal view is that BPM on top of SOA is brilliant since it provides easy integration between human and automated tasks, builds on many of the SOA concepts that are key for a successful BPM implementation (functional, not the Oracle product), and uses the same IDE. The synergies extend past easy use of services; the same business rules and human workflow components are used between both products.

BPM 11g integration with UCM11g using Java Enbedded acitivity

Hi Friends,
Can anyone throw some idea how to integration with BPM11g and UCM11g
We need to have a java code using Java Enbedded acitivity.
1) How to Connect to UCM 11g using java code any sample Java Embedded Code( we are connecting through RIDC)
2) How to Fetch the document from UCM using RIDC.
3) How to Close the Connection.
Hi friends,
My requirement was Using BPEL JAva Embedded Acitivity need to connect UCM by RIDC. Got SCAC exception. I could solve this today 3/12/2012... refer below link
Re: SCAC-50012 Got this exception when using BPEL Java Embedded Activity
But I have the actual thing.. as per my post..
Now I need to fetch the doc i.e.,
In UCM we have pdf documents i need to Download that document and show it in ADF UI using Java Embedded Activity.
Ie., Using Java Code I need to Download and Decode the PDF file using Java Embedded Activity after Connection with UCM. Save as a file in Local Machine then I need to Encode ads PDF and Show it to ADF UI.
Please experts its Quite Urgent!!
ThankQ!!
Regards,
Pavan
Edited by: BPM Fresher on Dec 3, 2012 8:12 PM

Hi experts...
Any solution for this.. Can any one help me on this...
Regards,
Pavan

Integrating BPM 11g and BAM

Similar Messages

Maybe you are looking for