Integrating TFS with Dynamics CRM CrmSvcUtil.exe for proxy generation in CI builds

Hello
    I want to know if someone has been done integration with TFS using CI Builds for regenerate the .cs classes that the tool CrmSvcUitil.exe (Dynamics sdk) provide.
     I have done something similar in the past with VS 2010 SDK, in Build Server calling "run custom tools" command for regenerate the edmx file structure before compile the solution.
    Any ideas?
regards,
Javier

Hi Javier,
Based on your description, it's reasonable to change the post to a general discussion post.
If you want to get information about TFS integration with Dynamics, there is a third party tool can integrate TFS and Dynamic CRM. It sends data (e.g., bugs, features, etc.) from CRM to TFS. In addition, it updates CRM based on TFS activity. You can check
this
page for more information. 
If you want to do build extention by using VS 2010 SDK, and do the integration with TFS. You can post your code and elaborate the details in
Visual Studio Integrate forum
for a better respose.  
If it's not your scenario, please elaborate more or change it to a general discussion post.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Do you have support to integrate echosign with Dynamics CRM 2015, If Not, When it will be possible.?

    Do you have support to integrate echosign with Dynamics CRM 2015, If Not, When it will be possible?

    Hey Mantas,
    Do not expect that feature any time soon. I do not even see that being a feature this year.
    Considering all that is going on and required to be finished and sorted a lot more is/will need to be done.
    In terms of what you can do I have done things like used the refer a friend form which you can style and use that to send emails out to the needed people. I have submitted multiple web forms with ajax etc as well.
    You have the custom fields for the people and emails (if not you can add them) and you can use those to send emails off to people, you just do not have a workflow so your not pestered with it but the notification message is the one that goes out and can have a template applied.
    So there is a number of things you can do to get that going along those lines. I have done a few variations of this on different sites.
    Warning note though - Ajax submission for custom web forms has a total character limit (all fields) of 1024 characters, which is not a lot.

  • Test runner freezing when used with Dynamics CRM (and other apps) - Both applications freeze and never come back...

    We are trying to use test runner with dynamics CRM.
    MS Dynamics CRM will freeze and will not respond (even after 10 - 15 minutes). When this happens, the test manager will either freeze or a message will apear saying "waiting for application under test".
    We are not recording action recordings...This makes using test manager impossible. It happens consistently, starting with slowing the PC down (mouse moving slowly, slow to load in new screens, drop downs etc) eventually leading to the app freezing.
    Tried on windows xp, windows 7 etc on various specs of pcs.

    I am experiencing this same issue with
    Test runner freezing when used with Dynamics CRM. I notice this was first posted in June of 2010 and so far no
    resolution? I was wondering if it could be related to memory issues? Do you have any troubleshooting ideas? The
    issue for me seems to be sporadic and I can't
    reproduce it every time.
    The message I get is "waiting on application under test".
    DLM

  • Options for integrating Tickets between Dynamics CRM 2011 and Service Manager 2012 ?

    Any suggestions on the integration of Dynamics CRM 2011 and System Center Service Manager 2012 ?
    I am looking for side-by-side integration like this:
    1. A ticket in CRM is entered I want it to be entered in Service Manager.
    2. Once a ticket is updated in SM we'd like that reflected in CRM. 
    3. If ticket is updated in CRM should be reflected in SM.
    [Tickets originating in SM moved to CRM is not a requirement.]
    Please suggest some guidance around this topic :)
    -Nikita Polyakov

    Nikita,
    I'm currently in the process of integrating CRM with Service Manager. I'm actually using Anton his approach, using Orchestrator 2012 runbooks.
    Basicly I am creating a runbook that queries the database of CRM (via the filtered views) and with that data I am creating objects in Service Manager (via the Service Manager integration pack)
    - Dennis | Netherlands | Blog |
    Twitter

  • CCX 9 integration with Dynamics CRM 2011?

    Hi,
    Please help me with intgeration of contact center 9 integration with Microsift Dynamics CRM 2011.
    Please points me to some good documents. Is the coneector for Dynamics still available or EOS?
    Regards,
    Nirmal

    Hi,
    Yesterday we announced the release of the EchoSign for Microsoft Dynamics 2013 integration.
    For more information please visit our blog, http://adobe.ly/1c1ovWG
    The Dynamics 2013 integration includes:
    Ability to send documents directly from within Leads, Opportunities, Contacts, and other Microsoft Dynamics entities including custom entities
    Real-time status tracking of EchoSign transactions with visibility to EchoSign events in the Dynamics Activity Feeds
    Automatically merging data from Microsoft Dynamics fields into contracts, and push data from signers back to Dynamics fields
    Ability to attach invoices or custom reports and send them for signature. This allow dynamic generation of documents and forms using the native Microsoft capability and be able to leverage that within our integration
    Record and store the signed agreements and the audit trail that capture each step in a contract’s history

  • How to buid integration with Dynamics CRM Online

    I have SQL Server 2014 OnPremise. How to use SSIS to fetch data automatically to Data Warehouse from Dynamics CRM Online?
    Kenny_I

    The easiest would be probably to use a commercial component, CozyRoc must do: http://www.cozyroc.com/ssis/dynamics-crm-connection
    Otherwise I can direct you to a blog post http://blogs.msdn.com/b/crm/archive/2008/05/07/integrating-crm-using-sql-integration-services-ssis.aspx which is quite updated.
    I remember somebody else who wanted to connect to MS Dynamics and he used http://www.kingswaysoft.com/products/ssis-integration-toolkit-for-microsoft-dynamics-crm solely.
    Arthur My Blog

  • Get the WSDL-File used for proxy generation

    Hello everybody!
    I created a Web Service Proxy:
    SE80 -> Select Package -> Enterprise Services -> Client Proxies -> New -> WSDL Source: Local File.
    Everything worked out fine. I was able to create that Proxy.
    Now I would like to look at the WSDL-File that has been used:
    If I take a look at that Proxy by SE80 -> Select Package -> Enterprise Services -> Client Proxies -> [Select Proxy] -> Display in new Window -> Goto: The Menue Entry "Display WSDL Document" unfortunately is disabled.
    I have not configured the integration builder.
    Is there a possibility to get the WSDL-file that has been used for the generated proxy? Does anybody know, if the WSDL-file, that has been used for the proxy generation is archived somewhere in the system?
    Thanks,
    Andreas

    Hello,
    Thanks for your reply.
    I am using SAP ECC 6.0:
    SAP_BASIS     700     0010     SAPKB70010     SAP Basis Component
    SAP_ABA     700     0010     SAPKA70010     Cross-Application Component
    Unfortunately the tab "Proxy Generation" at Utilities -> Settings is not available with my release.
    Any other idea?
    Greetings,
    Andreas

  • Problems with windows-installer (setup.exe) for 11.2 beta

    windows-installer for XE 11.2 beta appearently FIRST checks the space available on drive C:.
    As the installer prevents installation, insiting that there is not enough space (1500Mb) to install oracle-XE, there's nothing but the chance to provided sufficient space on drive C:, no matter to which drive you are determined to install XE to...
    wouldn't it be nice to fix that?
    best regards,
    norbert

    Hello Norbert,
    there are several objects that will reside on your system drive, perhaps you also have temp on C:\, so I guess you'll actually need space there no matter which drive you chose as target for the (main part of the) installation.
    Note that a similar issue has been discussed here: {thread:id=2201310}
    -Udo

  • Cant see software component in list of components for proxy generation

    Hi all,
    I am tring to implement ABAP proxy.
    The problem i am facing is that i cannot see my software component in the list of software components when i use SPROXY tcode.
    All other software components existing in the integration builder are seen. Only mine is missing.
    What could be the possible reason.
    Thanks in advance
    Regards
    Neetu

    Hi Keith,
    I am using SAP WAS 6.4.
    How to check the connection to the integration builder and SLD.
    I think everything is fine because all other software components can be seen. Only my software component is missing.
    I think i am missing out some setting.
    Pls giude
    Regards
    Neetu

  • Using EchoSign for Dynamics CRM with Microsoft Outlook Client

    We have successfully integrated Adobe Echosign with Dynamics CRM 2013 (on-premise) and have been issuing contract documents etc via Dynamics for almost a year. Initially, users were able to issue using both Dynamics web client & Outlook Client. Unfortunately, after the Outlook client SP1 RU1, we have lost the Echosign functionality via the Outlook client. Outlook client SP1 RU2 has just been installed with no change to the loss of Echosign functionality. This leaves us with only Dynamics web access if we need to issue a document via the Echosign for Dynamics solution, which is frustrating for our users.  Has anyone else experienced this issue and been able to fix it? Any pointers would be appreciated.
    19/02/2015:
    Update - uninstalled Office and installed 32 bit Office 365. the Outlook client now works. users with Office 365 64 bit cannot send via Outlook client. uninstalling and installing 32 bit solves the issue (so far). 

    Hi Steve,
    Thanks for the update here. It appears to be that the 64bit version is still having issues which is being investigated.

  • Creating a package for proxy scenario?

    Hi friends,
    Can you give me some info regarding package creation while generating proxy? In which system we need to create package?
    Thanks in advance
    Bala

    Hi Bala,
    You can try this.
    How to create a Package For Proxy Generation in R/3
    For proxies you need to create a four level package. Goto the Transaction SPACKAGE and Give your own package name starting with Z and choose create.
    Then create SAI_SXMS and SAI_TOOLS Package interfaces in the use access tab page. Now include a new package name in Package included tab page.
    Double click on your new packge name continue the same steps 2 more times,
    now the four level package has been created, you can use 
    the first given pakage name as a package name for creating packages
    Regards
    Seshagiri

  • R/3 to xi connection for proxy communication

    hi guys,
    can anyone provide me with the settings on both the ends, of the xi server with an r/3 server for proxy communication as i am having difficulty setting the systems up.
    it would be really g8t if someone could give a step by step procedure to followed at both the ends.
    thanking you in advance,
    regards,
    rajeev

    Hi,
    Applications based on SAP WEB AS version 6.20 or higher can communiate with the XI in the native XI-SOAP format via proxies. All other applications, including "legacy" SAP systems (those on the Basis releases lower than version 6.20), communicate with the XI via Adapters.
    ABAP Proxy Scenarios:
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    --Archana

  • ECC 6.0 integration with Microsoft Dynamics CRM

    Hi All
    I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
    Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
    I really appriciate your thoughts on this. We don't have XI either.
    Thanks a lot
    Van

    HI Van Dan Jan,
    We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
    There is two way requirements :
    1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
    2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
    Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
    In SAP we have two things
    1.  if DATA size is small (below 2 MB) like  in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
    2. If Data Size is large (more than 2 MB)  like total transation happened in a day for all customers: then we wriiting the data in OS or application server  and that job also get initiated from Biztalk end by sending any parameter to SAP.
    advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
    There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
    and  please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
    do let me know if you need further information.

  • ECC 6.0 integration with MS Dynamics CRM 2011 on-demand thru PI

    Hi Gurus,
    sorry in advance if some of my doubts will appear to you experts as stupid....
    Scenario: we're on the way to realize the integration between SAP ECC and Microsoft Dynamics CRM Online (so...in the cloud) using SAP PI 7.11. In our scenario SAP PI will be the client, consuming webservices provided by MS CRM.
    Unfortunately during the PI configuration (following SAP HELP instructions) we're facing the following problems:
    1. The system (PI, dual-stack installation) has the parameter 'ssl/pse_provider' set to 'ABAP'. Considering that we would like to use SSL with SOAP adapter, questions are: 
      - Can we use the ABAP stack to maintain the PSEs, or it's mandatory to do it into the AS Java in order to use SSL with SOAP adapter.
    - If so, we need to switch the ssl/pse_provider parameter to JAVA. Could this change create some kind of problems?
      For information, currently in transaction STRUST we only have a Local node, neither Server nor Client nodes.
    2. We have already installed the SAP Cryptographic Library for SSL but: 
      - In NWA we can't find ICM_SSL_<instance_ID> view or CLIENT_ICM_SSL_<instance_ID> keystore view into the list of Keystore Views.
      - We would like to change the default Profile into RZ10 but we Can't find the profile... 
      - MS CRM (ws server) give us only a public certificate but do we need a private key too or we have to generate it from SAP?
      - We need to know if is possible to use the MS 'LIVEID' authentication with SAP PI or SAP ECC.
      - Do we need additional modules for the SOAP adapter(maybe an Axis one in order to use soap protocol 1.2)?
    Could you please suggest the right configuration and give us some tips about this kind of integration?
    Thanks a lot,
    MR

    Hi Mauro,
    Looking at your background I thought maybe you could help me out wit this integration question.
    I'm looking for some feedback on how best to integrate Microsoft Dynamics AX (DAX) with SAP CRM. We have a PI server.
    From reading on the net, I see many people are using a middleware product called Scribe or BizzTalk. We already made an investment with SAP PI and we'd like to use it.
    Do you have any references for Microsoft DAX integration with SAP CRM via SAP PI/ XI?
    Thanks in advance!

  • Outlook 2013 with Dynamics 2013 CRM Plugin extremely slow

    I have recently upgraded my Dynamics CRM server from 2013 to 2013 SP1
    All of my user machines (VDI) have office 2013 with the Dynamics CRM 2011 plugin installed (I previous had Dynamics CRM 2011 on a seperate server, but 2013 was released before we set it up and so I removed the old 2011 server).
    The website has a GlobalSign SSL against it and runs fine internally and externally. I also have a terminal server running Server 2012 with Outlook 2013 and the Dynamics CRM 2011 plugin and this also runs fine.
    My machine was running fine but I decided to upgrade the Outlook plugin to 2013 and that's where my problems started. I removed the 2011 plugin (and even followed the detailed guide on how to completely remove it) and then installed the 2013 plugin.
    It installed fine but when I use it, it is ridiculously slow. For example, I highlight an email and then click "Track" in the tool bar. What should happen is the little icon of the blue/green people should appear next to it and then the options for
    "Convert To" text should be available, but they are not. The button at the top changed to read "Untrack" but that's it, making it completely unusable. If I go an make a tea, and then come back and then go an make another tea, sometimes
    it will have updated by the time i get back, but generally it does not. I can close and re-open outlook and still the icon does not display next to the email. Interestingly although the button at the top reads "Untrack" which indicates that it is
    being tracked, the pane at the bottom reads "This email is not being tracked in CRM".
    Now, if I logon to the terminal (RDS) server (that I mentioned above) everything works fine and Outlook updates immediately, all the machines are on the same VLAN and so I should be able to rule out firwall issues (that terminal server is still running the
    2011 plugin) so that would indicate that this is a problem with my machine. I created a fresh machine and installed that same applications and the same problem was had, so that now indicated that its a problem with the plugin perhaps or something very specific
    to my setup.
    I had tried to download and install SP1 for Dynamics CRM 2013 for Outlook but on 2 separate machines I received the same error when installing
    The log for my attempt last night shows:
    23:11:44| Info| Refreshing previous hotfix ARP entries
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2466084_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2466086_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2547347_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2556167_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2567454_Client_1033
    23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2600643_Client_1033
    23:11:44| Info| Retrieving current hotfix ARP entries for 0c524d20-1409-0060-8a9e-0c4c490e4e54
    23:11:44| Info| Retrieving entry KB2466084_Client_1033
    23:11:44| Info| Retrieving entry KB2466086_Client_1033
    23:11:44| Info| Retrieving entry KB2547347_Client_1033
    23:11:44| Info| Retrieving entry KB2556167_Client_1033
    23:11:44| Info| Retrieving entry KB2567454_Client_1033
    23:11:44| Info| Retrieving entry KB2600643_Client_1033
    23:11:44| Info| Retrieving entry KB2888948_Client_1033
    23:11:44| Info| value 'RegistryLocation': ''
    23:11:44| Info| value 'HelpLink': 'http://support.microsoft.com/kb/2888948'
    23:11:44| Info| value 'ParentKeyName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Info| value 'UninstallString': 'C:\Windows\\$CrmUninstallKB2888948_Client_1033$\CrmUpdateWrapper.exe /uninstall'
    23:11:44| Info| value 'NoRemove': '0'
    23:11:44| Info| value 'ParentDisplayName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Info| value 'NoRepair': '1'
    23:11:44| Info| value 'DisplayVersion': '6.0.0000.0809'
    23:11:44| Info| value 'Publisher': 'Microsoft Corporation'
    23:11:44| Info| value 'DisplayName': 'Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2888948)'
    23:11:44| Info| value 'NoModify': '1'
    23:11:44| Info| Retrieving entry KB2941390_Client_1033
    23:11:44| Info| value 'HelpLink': 'http://support.microsoft.com/kb/2941390'
    23:11:44| Info| value 'UninstallString': 'C:\Windows\\$CrmUninstallKB2941390_Client_1033$\CrmUpdateWrapper.exe /uninstall'
    23:11:44| Info| value 'DisplayName': 'Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2941390)'
    23:11:44| Info| value 'NoRemove': '0'
    23:11:44| Info| value 'NoRepair': '1'
    23:11:44| Info| value 'RegistryLocation': ''
    23:11:44| Info| value 'NoModify': '1'
    23:11:44| Info| value 'ParentDisplayName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Info| value 'DisplayVersion': '6.1.0000.0581'
    23:11:44| Info| value 'Publisher': 'Microsoft Corporation'
    23:11:44| Info| value 'ParentKeyName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
    23:11:44| Error| System.Exception: Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed. ---> System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.<>c__DisplayClass7.<RemoveSupercededEntries>b__5(ArpEntryDescriptor entry)
    at System.Linq.Enumerable.WhereListIterator`1.MoveNext()
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.RemoveSupercededEntries(IEnumerable`1 arpEntries, Version minimumVersionToKeep)
    at Microsoft.Crm.UpdateWrapper.MspInstallAction.Do(IDictionary parameters)
    at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
    --- End of inner exception stack trace ---, Error, RetryCancel, Option1
    23:11:50| Info| InputResult: Cancel
    23:11:50| Info| CrmAction execution time; MspInstallAction; 00:01:12.9310905
    23:11:50| Error| Install exception.System.Exception: Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed. ---> System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
    at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.<>c__DisplayClass7.<RemoveSupercededEntries>b__5(ArpEntryDescriptor entry)
    at System.Linq.Enumerable.WhereListIterator`1.MoveNext()
    at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.RemoveSupercededEntries(IEnumerable`1 arpEntries, Version minimumVersionToKeep)
    at Microsoft.Crm.UpdateWrapper.MspInstallAction.Do(IDictionary parameters)
    at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
    --- End of inner exception stack trace ---
    at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
    at Microsoft.Crm.UpdateWrapper.HotfixMspInstaller.Install()
    at Microsoft.Crm.Setup.Shared.ComposedInstaller.InvokeInstall(Installer installer, IDictionary stateSaver)
    at Microsoft.Crm.Setup.Shared.ComposedInstaller.InternalInstall(IDictionary stateSaver)
    at Microsoft.Crm.Setup.Shared.ComposedInstaller.Install(IDictionary stateSaver)
    at Microsoft.Crm.UpdateWrapper.UpdateSetup.Install(IDictionary data)
    at Microsoft.Crm.Setup.Shared.SetupBase.ExecuteOperation()
    23:11:50|Verbose| Method exit: Microsoft.Crm.UpdateWrapper.UpdateSetup.ExecuteOperation
    23:11:50| Info| failed.
    23:11:50| Info| Setup did not complete successfully.
    Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed.
    The given key was not present in the dictionary.
    23:11:50| Error| Setup did not complete successfully.
    23:11:50|Verbose| Method exit: Microsoft.Crm.UpdateWrapper.UpdateSetup.RunInternal
    23:11:50|Verbose| Update Not Completed
    23:11:50|Verbose| Update Not Completed
    23:11:50| Info| Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2941390) was not completed successfully because of the following problems:
    Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed.
    The given key was not present in the dictionary.
    23:11:50| Info| ActivatePage(HotfixFinishPage)
    I also tried manually installing Rollup 2 before installing SP1 but I still get the same error.
    Now I'm not sure if the Outlook plugin update is going to fix the problem, so as it stands I have 2 problems:
    Very very slow Outlook CRM Plugin when updating emails and icons
    Cannot install 2013 CRM SP1 for Outlook
    So, I'm stumped, and this is really holding me back. I will post any updates here, but if anyone has any ideas, please let me know.

    I have Outlook 2013 with the CRM 2013 Outlook client and it was running fine until about a week ago.  I ran windows update and suddenly everything stopped working. I am going to try to uninstall all the updates until I determine which one is the cause
    of the problem.  It would be nice if MS tested before releasing updates...
    Ken Compter

Maybe you are looking for