Integration Process problem in Message Split.

Hi all,
I have done message split using the this blog.
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
I am getting problem in the BPM i.e. in Integration Process. In the message monitoring of RWB I am able to see data Outbound to BPM exchange but BPM to Inbound is not at all happening.
I dont have any SAP tools to trace the BPM.
I have been trying this for 3 days desparately.
Can somebody please help me in this.
Thanks,
Subhosh.

Hi,
Like mentioned by Udo, you need to have the SAP log on to be able to debug and find the cause for your problem.
One option, can you look into message monitoring in RWB and check what the error message is?
Regards,
Bhavesh

Similar Messages

Problem in message splitting...

Hi All,
I am using a BPM iwhere i am doing message splitting by using a transformation step, after this transformation step i kept one loop to collect and process this splitted messages... but first message from splitted messages only gets into loop and processed.... rest of messages are not getting out of transformation or they are not getting into loop.... can anybody help me out that how i send rest of splitted messages into loop.
Thanks in advance..
Srinvas.

Hi,
What kind of collection pattern are you using?
Regards
Ivan

Problem during Message Splitting

Hi,
My requirement is to split by Senders Message..
During Mapping i have changed the occurenec of my ZRFC to 0..unbounded..
Mapping i slike
Message->                             Message->
    Message1->                        Message1->
        MT_AABAP->                    Ztest1(M1->)
          header(M1)->                               DATA->
            EMPNO(M2)                                 EMPNO(M2)
            DEPT NO(M3)                               EMPNO(M3)
The problem is coming is Interface Determenation(ID)
i have maitained it like
Enahanced (Type of Interface Determenation)
But the error is coming like:RCVR_DETERMINATION
NO_RECEIVER_CASE_ASYNC

hi
in the configaration-->receiverdetermination
selecting the radio button <i>End message processing without error(restart not possible)
thxs
kalyan

How to trigger an integration process at a certain time each night.

I have an integration process to collect messages that I would like to trigger at a specific time each night. I looked at the Wait step in order to do this, but it looks like you can specify a fixed time, or a repeating time.
If I used 'Wait until Specified time', I could specify the time, but the date is a problem; I cannot fix it as a certain date because it will only work for that date only.
If I take the date from a field of the message, I'm not sure what will happen since it looks as if the date would be updated each time a message is received to the collective process.
I could take the date from the first message, and store it as a variable, then use that in the wait step, but since the date is not in the correct format, I would need to use xpath somehow to do that.
Alternatively I was thinking about using a wait for event step, and raising the event from a background job, but this only seems to be available in ABAP Workflow directly, not from the Integration Process Editor. Is it permissable to modify the generated ABAP Workflow and add a Wait for Event step to allow this to happen?
Does anybody have an opinion on the best way to proceed?

Hi,
Check these
Polling based upon availability
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
REgards
Seshagiri

Performance tuning in objects involving Integration process (BPM)

Hi,
We are facing a performance problem in one of our objects having integration process. The messages are getting processed sequentially instead of parallel processing within the integration process. As a result, the messages are getting queued up in the queue waiting for processing. Thus by the time all messages get processed, the time taken would have been alarmingly high. There is no correlation involved in the int process. My questions are
1. Is there any performance related best practices/checklist/config steps available for BPM related implementation. If so, please furnish/provide the links if any.
2. If it is not related to BPM , but related to tuning up of the queues, please provide the guidelines for queue tune up.
3. How to ensure that the messages are processed in-parallel within BPM ?
Regards
Ganesh

Hi,
Am not sure whether this would help you. By any chance did u use For Each instead of Par For Each.
Cos, when u use For each in an container step, all messages would be processed sequentially.
Do let me know if it helps you!
Regards,
B.Anandh

BPM Message Split: Does it really work?

Hello everybody,
did anybody of you design a process with a message split that works?
If I look the SAPs tutorial "checkSeatFlightAvailability" an test the message-split in IR I CAN'T see that there is a message really splittet into MESSAGE1, MESSAGE2 ..MESSAGE-N!
I wonder why there is just one blog?
Regards Mario

Hi Mario,
Yes the message split does work:) You can even split without using the bpm(if you want to)
Here are the weblogs :-
using bpm:-
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
without using bpm:-
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
Regards,
Sushumna

Returncode 99 in integration-process

Hallo,
since update to SP15 we have problems with our integration-process. Each assignment from a message to a container variable (typ string or int) go on message-type e (error) during activating the integration-process.
The message is:
Value of the expression 'name container variable.attrib' cannot be the source by assignment. In one case this affect from an boolean to string (type of the container variable); but this was in the past no problem. It is possible that since SP 15 that might be a problem? The other assignment looks good.
But what is the problem
Thanks in advance,
Frank

Hi Frank,
this problem can maybe solved by implementing the following notes: 890760
Cheers,
Paul

Serial processing with integration processes

Hi all,
I have the following problem. I receive a XML message in a integration process, this xml messages contains serveral business partners. I loop over this business partners wiht a 'ForEach' The messages are sent to a second integration proces. In this integration process a business partner is updated in SAP CRM.
The problem I have is that several instances are started of this second process and this result in locking issues in SAP CRM. How could I configure XI in this way that only one message is processed.
I read all queue related documentation, but according the documentation the messages should only be picked up from the queue when it is ready.
I use only one queue (withoug buffering) Used system is XI with the latest service pack.
Thank you in advance for your reply.
Kind regards,
Pieter Alting

> I loop over this business partners wiht a 'ForEach' The messages are sent to a second integration proces. In this integration process a business partner is updated in SAP CRM.
Do you really need another IP here? May be you should look at avoiding this and check if you are using ParForEach or just ForEach.
VJ

Message Split in Conversion Agent possible?

Dear All,
Now I am facing a problem of message split in conversion agent. I have a big file which contains lots of records, and the client wants to use conversion agent to split it and send to SAP XI. Is it possible? Is there anyone who has the experience on this? Any comments or suggestions are appreciated.
Regards,
Nick

Hi Nick,
i have not done this thing....so i am not sure.....but i think you can use conversion agent and content conversion both in sender adapter because in conversion agent you will create a project for XML parsing which you will then deploy in XI and content conversion is a msg protocol of file adapter.
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA

Integration Process Parameters not refreshed

Hi,
I have an integration process which takes parameters. You can configure these in the integration builder in the Integration Process Communication Component.
I found that although I change these parameters , their new values are not taken into account in the integration process instances that are started after the change is activated.
How can I force the integration process to use the new values ? Reactivating the integration process does not help.
Actually, reactivating the integration process changes the integration process but the message mappings and operation mappings do not use the new values...
I also completely flushed the cache but it does not help either...
Thanks.
Edited by: Thierry Dagnino on Sep 29, 2009 3:55 PM

Have you also deleted the Integration Process in ID and reimported it?
Regards,
Prateek

About Container Category in Integration Process (BPM)

Hi Friends
Can any one explain me abut Process container variable ReceiverList which is defined as a type "Receiver"
and How to use in Integration Process With Examples
Message was edited by:
Viswanadh Vadde

Hi Vishwanadh,
The Receiver type container variable is used to determine the receiver in the send step.
The Simple type container variable are xsd data type variable which may be xsd:string / xsd:integer / xsd:date / xsd:time. These variables are used as process control elements such as counters in the IP.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

Difference between Integration Process & Business process in SAP XI

Hi Friends,
Good Evening. I am getting a lot of confusion between Integration process & Business Process. Could you please explain me with good example?
Thanking you all in Advance.
Thanks & Regards,
Nagarjuna.

Hi,
The IP and the BPM are not different.
its explaniation from [help.sap|http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm]
The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
At configuration time, you configure the receiver determination for the integration process in the Integration Directory of the Integration Builder.
At runtime, the Business Process Engine executes the integration processes. The Business Process Engine is part of the Integration Server.
Cross-component Business Process Management is integrated with the business workflow. An integration process can send messages to a workflow and, conversely, messages from a workflow can be processed in an integration process.
Thanks
SaNv...

Split message mapping to integration process

Hi,
I faced an error when trying to send a multiple message (after a message split) to an integration process and I would like to know the possibilities to resolve this issue.
What I want to do (more details below) :
1. Get an order list from a database
2. Split the order list in multiple orders (via a multi-mapping)
3. For each order, create a new integration process instance
The error I got is:
Messages in multi message format can be sent to one adapter engine only
The solutions I thought of:
- Creating a new integration process / Update the existing integration process in order to execute the message split in the process engine
- Create a new service (or business system) as a receiver instead of the process that points back to another XI service and set-up the appropriate configuration between the second service and the existing integration process
My question: is there another solution than the two above?
Thanks in advance
Here are the details of what I did:
1. A JDBC request returns an order list like:
<resultSet>
   <row>
      <order>[...order 1 details...]</order>
   </row>
   <row>
      <order>[...order 2 details...]</order>
   </row>
</resultSet>
2. During interface determination phase, a multi-mapping is executed to produce several orders:
<order>[...order 1 details...]</order>
<order>[...order 2 details...]</order>
3. The target receiver is an integration process who take as initial document only one order ; so, having two orders as a result of the split, I would like XI to create two new instances of my integration process, each receiving exactly one order.
And there's when the above error occured.

Hi Alexis
Creating a new integration process is suggested as your target receiver is your current integration process and along with this splitting and passing data to multiple receiver can be done in integration process.
Thanks
Mitesh

Missing sender information in message from Integration Process

Hi All,
I am testing a scenario uses Integration Process. This Integration process sends out a async message but this message has empty sender tag in header , Because of this routing rules and agreements defined for this are not triggered and message goes into error state.
There is sender interface Information in message header but not integration process information. I am working on SAP NetWeaver PI 7.1 system. This is working from other synchronous interface in same process.
Routing rule and receiver agreement has sender as mandatory field, so can not define generic set without sender component.
I went through SAP Note 807640 But there is no information about such error.
Am I missing something in configuration? Please let me know how can i configure Routing Rule and Interface Determination for this scenario.

Thanks for replying to the post.
Integration process is used as a async-sync bridge. Following are high level steps.
1. Receive async FI message from sender
2. Map message to BAPI SAP FI document
3. call Sync BAPI.
4. Map the response of BAPI.
5. Post it back to sender in async mode.
I am having problem in step 5 where message is coming out of BPE without its own name (i.e sender name). Thus it does not triggers Routing rules and fails.

Problem with Mulit Mapping/Message Split

Hi,
I am a newbie to XI trying to set up a file2file scenario with multi-mapping/message splitting without BPM.
System is XI 3.0 SP14
Scenario is:
read an XML-File and multiply it and write 2 XML-files using the File adaptor.
For reference I used "multimapping without BPM".
- setting occurancy of Message types to unbounded in both Message Mapping and Interface Mapping.
- using the RB_Split button
- setting up one business service containing 2 message interfaces and 2 communication channels for output.
Designing and Konfiguring worked fine.
File is read but no file is written.
XML-Moni tells me "Mapping did not create Messages"
I did extensive studies in sap.help, forum and various blogs. Also to verify Messagetypes and Kommunication channels I set up similar file2file scenario without splitting. Nothing really helped.
Any clues?

Hi again,
very efficient method to test XML-source file. - Thanks.
Unfortunately it did not solve my problem.
Again: "Split mapping did not create messages"
Below you can find a part of the trace created when processing this message:
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_data_duplic_async_.</Trace>
<Trace level="3" type="T">Load ac6179b0-a92e-11da-be15-e51f0a000472, http://MyTutorial/SHeinz05, -1, com/sap/xi/tf/_MM_data_duplic_async_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_data_duplic_async_.class (http://MyTutorial/SHeinz05, -1) in swcv ac6179b0-a92e-11da-be15-e51f0a000472.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_data_duplic_async_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_data_duplic_async_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_data_duplic_async_ completed. (executeStep() of com.sap.xi.tf._MM_data_duplic_async_</Trace>
<Trace level="3" type="T">Nachrichtentyp 1 Anzahl der Nachrichten 0</Trace>
<Trace level="3" type="T">Nachrichtentyp 2 Anzahl der Nachrichten 0</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Test of MM and IM is always successful.
Any clues?

Integration Process problem in Message Split.

Similar Messages

Maybe you are looking for