Intel HD Graphics 4600 driver works as Intel Xeon E3-1200

I have intel 4770S series new processor. Its properties are listed in the link below:
http://ark.intel.com/products/75124/
As you can see it is with "Intel HD 4600 Graphic"
I use latest intel driver with mesa.
but i receive as a output of lspci -v
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device d000
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
What can I do now?

That listing shows two possible devices: Xeon E3-1200 v3 Integrated Graphics Controller *or* 4th Gen Core Processor Integrated Graphics Controller. And "4th Gen Core Processor" is Haswell, which can have any of these GPUs: HD (GT1), HD4400 (GT2), HD4600 (GT2), Iris 5100 (GT3), Iris Pro 5200 (GT3e).
So the listing is correct, you're just reading it wrong. Also, it's just text from a database that maps pci-ids to a human readable description. This text has no influence on how devices actually work.

Similar Messages

Intel HD Graphics 4600 Driver

I hesitated to purchase an HP product, but after checking into my choices, I relented. Overall, things have been fine, but I've got a nagging issue for which I've re-installed the software (Minecraft) and I still have an ongoing flickering issue.
I have the latest video video driver for the 4600 built in graphics, dated 2013-12-20 , Version10.18.10.3262 Rev. A,
There has been no video card driver update since 12/2013 and mainstream video card drivers are updated once a month or every few months.
When researching in the Minecraft support, they point to a known issue in Intel 4000 class onboard drivers and to upgrade to the latest driver. Intel's driver is from 10/24/14 and is version 15.33.30.3958. While the version numbers may not coincide, the posters noted that a driver update fixed it.
How do we get to the bottom of this issue? I can understand the desire to look at software settings, but unless I hit a non-compatible setting, I should be able to set it where I want it. Thank you.

4600 built in graphics are typically a part of the Intel 4th generation Core processors. HERE is a page linking typical downloads for that. Please bear in mind that there is a delicate balance in how those are implemented in OEM machines and that may be the reason HP does not show any updates for the driver. You are at your own risk in messy with that balance, IMHO. You can improve gaming experiences by installing a discrete graphics card, however.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Intel Graphics 4600 driver

I have been having an issue with the most recent graphics driver for my integrated 4600 Graphics Card. When I have the most recent driver installed, any of the modern apps I have installed won't open. Whenever I try to roll back the driver,
Windows Update graciously supplies me with the most recent version again. Now on every boot, I have to uninstall my Graphics Driver which resets all my settings. On each subsequent boot, Windows Update installs the new driver, closing all my apps
and preventing them from opening. I get about a 2-3 minute window of time to try to accomplish what I need to to in Mail and other apps before the update takes place. Is there a way to get Windows Update to ignore this specific driver update, or
some way to lock the old driver? Its come to a point that I would be interested in spoofing the update check into thinking I have the new driver when I am still using the old one. Any help would be appreciated. Thank you.

On Thu, 12 Mar 2015 00:46:13 +0000, dansk14 wrote:
I have been having an issue with the most recent graphics driver for my integrated 4600 Graphics Card.
This forum, as per the name, is for Windows 10 Phone issues. Please repost
your question to one of the Windows 10 for PCs/tablets forums.
Paul Adare - FIM CM MVP
"symlinks ... the goto of the file system world." -- David Tilbrook

Lenovo G510, the Intel HD Graphics 4600 and Radeon 8750M, will not work!

Good evening,
I have a Lenovo G510, 59401564, i7 with Intel HD Graphics 4600 and Radeon 8750M graphics card.
I have problems with graphics cards to get it to work permanently!
The installation of the graphics card driver works fine but after about 30 minutes an hour, crashes the laptop and a bright blue screen is shown "VIDEO_DXGKRNL_FATAL_ERROR".
After a restart, the Graffikarten are disabled, a small window says that the driver must be reinstalled.
I have the Windows 8.1 64-bit, drivers from the Lenovo website uses. To reinstall, I used Catalyst_13.12_WHQL_UnifL_R3.01.exe.
I've been trying to determine two days why.
I really need help, I think more users have the same problem.
I am grateful for any help!

hi angefragt,
Welcome to Lenovo Community Forums!
Did you just got the unit or You got it some time around?
If you were able to use the comuter before you might need to push a system restore to a date when the crashes did not appear. Adn start a Windows Update.
According to this, It may be a conflict, Driver or OS issue,
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557253(v=vs.85).aspx
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

G710 Windows 10 x64 Intel HD Graphics 4600 CODE 43

Hello,I have on my Lenovo G710 today upgraded to Windows 10 but unfortunately now have problems with my video card.It is the Intel HD Graphics 4600 Series.It works perfectly in Windows 8.1 Update 1.The official updated driver lenovo itself * Windows 10 is not working. update: Intel has released a beta driver, but I can only get in through Windows Update and have nothing in Windows Update unfortunately. How can i fix the videocard to working ?

UPDATE 19:40 / 07:40 PM SOLVEDI fixed the issue with the following steps: 1.Turned laptop off.2.Remove charger and battery.3.Press power button a few times.4.Reinserted battery and charger plugged in.5.Press power button en load windows.6.Removed the drivers of ALL MY GRAPHIC DEVICES (INTEL HD 4600 AND GEFORCE 820M)7. My laptop went black for 5 minutes and never woke up.(Force shutdown by holding power button8. Turned me laptop on (again) and then it was WORKING !!

Envy 15t (I7-4710HQ + Intel HD Graphics 4600) SSD Compatibility?

Hi All,
I'm looking at purchasing the Envy 15t i7-4710HQ Quad Core Processor + Intel® HD Graphics 4600.
When I try to select the 256GB SSD for the hard-drive, I get an error telling me that the Graphics chipset is not compatible with SSD and vice versa. Either I need to select a regular hard drive or change the graphics chipset which unfortunately would require me to change to a dual core 4510U processor which I'd prefer not to do.
http://www.shopping.hp.com/en_US/home-office/-/products/Laptops/HP-ENVY/G0T95AV?HP-ENVY-15t
I'm not too phased about buying the SSD from HP directly, I'm happy to add one in after the fact.
So, does anyone know if there is a definite incompatibility between the CPU / GPU and an SSD?
Additionally, is the 15t able to carry both an SSD and a regular hard drive?
I've seen the 15t-j000 being offered with both by default - http://www.amazon.com/gp/product/B00EWHJWLU/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A2TC87EJKQMY9O
Assuming the 15t above is able to run an SSD, does this mean I can buy the 15t above with a regular hard drive and add an SSD for my primary drive after I get it?
Thanks in advance!

wildestau wrote:
Hi All,
I'm looking at purchasing the Envy 15t i7-4710HQ Quad Core Processor + Intel® HD Graphics 4600.
When I try to select the 256GB SSD for the hard-drive, I get an error telling me that the Graphics chipset is not compatible with SSD and vice versa. Either I need to select a regular hard drive or change the graphics chipset which unfortunately would require me to change to a dual core 4510U processor which I'd prefer not to do.
http://www.shopping.hp.com/en_US/home-office/-/products/Laptops/HP-ENVY/G0T95AV?HP-ENVY-15t
I'm not too phased about buying the SSD from HP directly, I'm happy to add one in after the fact.
So, does anyone know if there is a definite incompatibility between the CPU / GPU and an SSD?
Additionally, is the 15t able to carry both an SSD and a regular hard drive?
I've seen the 15t-j000 being offered with both by default - http://www.amazon.com/gp/product/B00EWHJWLU/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A2TC87EJKQMY9O
Assuming the 15t above is able to run an SSD, does this mean I can buy the 15t above with a regular hard drive and add an SSD for my primary drive after I get it?
Thanks in advance!
Hi,
The Envy 15t with Intel HD graphics card probably doesn't have a mSATA slot. That means if the 256GB SSD is a mSATA one you can't have it in your laptop. I think it's the setup for the laptop from amazon. There is a 240GB SSD plus a 1TB HDD which is most likely a 240GB mSATA SSD and a 2.5" 1TB hard drive because the laptop has nVidia vga and also it's a 15.6" model with only one hard drive bay. Laptops with nVidia graphics chips definitely have a mSATA slot.
Yes, you can get the laptop with a hard drive and then upgrade it to a proper 2.5" solid drive.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Intel hd graphics 4600

When I plugged my HDMI in no sound came out the tv, so when i checked device manager intel audio chipset had a yellow triangle next to it, I found out online that my intel graphics HD 4600 driver needs upgrading as the latest version is 15.33.14.64.3412 but hp envy 1 j130ea keeps blocking the instillation saying its not validated for this computer. Are there any suggestions as the newest driver isnt available on the HP website

Hi,
Please post the HP product number for your PC.
How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Intel HD Graphics 4600 damage

Hello all,I bought a laptop G510- i7-4700 MQ @ 2.40 GHz. last years ( May-2014). I am sure that my Intel HD Grafics 4600 is damage because all the video´s outputs are off and in devices manager-Intel HD Graphic 4600 appears error 37 " this device has a problem". I re-installled the driver but nothing happened. As the the card graphic is integrated to microprocessor , can i only replace the microprocessor? or should i replace all board ?, Which is my best way? Thanks,Jose.

hi Jose,
Welcome to the Forums.
When you said the video output is off, do you mean you're getting artifacts / discoloration on the screen?
Also, the Intel HD Graphics 4600 shouldn't show an error code 37 even with an inbox (generic) driver. If applicable, you may want to consider reinstalling the OS first to isolate an issue on the OS level and run a diagnostic test on the CPU (e.g., using Intel Processor Diagnostic Tool)
More info:
How to Diagnose an Intel CPU with Intel Processor Diagnostic Tool
If the iGPU is indeed defective then you will need to replace the CPU.
Compatible parts (see page 82 of the HMM):
Intel I7-4702MQ 2.2G 4cPGA processor (G410/G510) - FRU#: 102500541
Intel I7-4700MQ 2.4G 4cPGA processor (G410/G510) - FRU#: 102500540
Regards

Best graphics card for MacPro 5,1- 2.8GHz Quad-Core Intel Xeon OS 10.6.8

Hi everyone.
I have a 2011 MacPro 5,1- 2.8 GHz Quad-Core Intel Xeon. 32GB RAM OS 10.6.8 with the stock ATI Radeon HD 5770 graphics card.
When I output/process/convert video through Quicktime or iMovie or Adobe Premiere or VisualHub (not always, but usually WS multi-pass H264, best quality), it seems to take forever.
Currently (as I type this) outputting a 2 hour movie made of 14 clips of 852x480 30fps 44KHz movies to a 29.97 multi-pass H264 48KHz file with Adobe Premiere CS 5.5.2- is coming up on 10 hours.
I would like to upgrade to a better graphics card with better VRAM and processing power. I realize that being on OS 10.6.8 may create a few problems. I'm willing to upgrade to 10.7 or 10.8 if need be. Though I'd hate to lose the carbon programs that I still use (like VisualHub).
I've heard that nVidia is the way to go, but I'm not sure which card to get. The Quadro FX 4800 looks promising (and expensive).
Anyone have any insight?
Thanks in advance for any help.

Dual or triple boot until you are sure if Lion or ML works.
GTX 570 2.5GB VRAM $320 from MacVidCards is one way to go, even GTX 680 (but that does require 10.8.x)
Nvidia 4000 (I thought I read Nvidia has a 5000 Quadro) not the older 4800. Amazon has Q4K $800.

Ere are the specs on the Mac I need more power on. Mac Tower Processor 2 x 2.26 GHz Quad-Core Intel Xeon Memory 6 GB 1066 MHz DDR3 ECC Graphics NVIDIA GeForce GT 120 512 MB Serial Number H00354XF20G Software OS X 10.8.5 (12F45) Harddive 640 GB SATA

ere are the specs on the Mac I need more power on.
Mac Tower
Processor 2 x 2.26 GHz Quad-Core Intel Xeon
Memory 6 GB 1066 MHz DDR3 ECC
Graphics NVIDIA GeForce GT 120 512 MB
Serial Number H00354XF20G
Software OS X 10.8.5 (12F45)
Harddive 640 GB
SATA Disk
(2) Harddrives 1 TB
SATA Disk
RAM 6 slots total -- 6 are filled with 1GB
(3) UAD Quad cards installed
I use this computer stictly for audio recording.
Pro Tools 10.3.7
Interface Apollo 16
Pro Tools is curretnly not compatible with Maverick. Also, I believe that Pro Tools 10 only allows 4GB ram to be utilized (not sure )
I know Pro Tools 11 allows more, but not sure how much more. Also not sure if the upgrade to Pro Tools 11 I will have to purchase all new plug ins or if my existing ones will continue to work in it.
The platform changes from 32 bit to 64 with the upgrade to 11
If it is as simple as adding more ram, what mode-part #l would you recomeend. Can the processor be upgraded also ?
The new tube like Macs are non compatible with UAD Cards. Those cards a must my sessions

You can use Activity Monitor to check if apps run as 32 or 64 bit - simply look at the "Kind" column (you may need to select it under View -> Columns) and see if the app in question is listed as "Intel" i.e. 32 bit or as "Intel (64 bit)".
While in Activity Monitor you can also check if Pro Tools is close to the 3-4 GB limit of a 32 bit app - if you aren't you will probably not benefit from more RAM.
Your MacPro (it appears to be a Early 2009 model) should have come with a small booklet showing how to install RAM and what kind of RAM that you need. Any RAM that fulfills the requirements should work but your safest choice is probably to buy from a retailer/online store that supports Macs as they will usually know what kind of RAM you need for your mac model.
Upgrading the CPUs should be possible, but I haven't seen Apple document how to do this, so you will probably have to google around a bit to find instructions and CPU part numbers.
Your choice of CPUs will also be limited by the motherboard and CPU socket so you may be limited to faster version of your current CPU chip and some slightly newer versions.
Going from your current CPU to the fastest version included in the 2009 MacPros would be going from 2.26 GHz to 2.93 GHz. This would only give a modest 30% speed boost. Using newer and highly clocked CPUs might boost this somewhat more maybe to 50% ?

I have a MacPro5,1, Quad-Core Intel Xeon, 2 processors running at 2.4 GHz. I am running OSX 10.6.8. I installed Yosemite on another drive. When I choose Restart in Yosemite it shows my 10.6.8 hard drive. But when I click Restart in 10.6.8 it does NOT

I have a MacPro5,1, Quad-Core Intel Xeon, 2 processors running at 2.4 GHz. I am running OSX 10.6.8. I installed Yosemite on another drive. When I choose Restart in Yosemite it shows my 10.6.8 hard drive. But when I click Restart in 10.6.8 it does NOT show my Yosemite drive. I used to know how to get the startup screen that showed multiple drives but I've forgotten it. How do I do that?

Press Option at startup.
(124807)

Since I upgraded to OS 10.6.8 from 10.5.x my 2x3GHz quad-core Intel Xeon desktop spontaneously turns off as if I pulled the plug. Mostly it happens when there is no open software and it's in the sleep mode, but it has happened while I'm working.

Since I upgraded to OS 10.6.8 from 10.5.x my 2x3GHz quad-core Intel Xeon desktop spontaneously turns off as if I pulled the plug. Mostly it happens when there is no open software and it's in the sleep mode (because it spends more time like that), but it has happened while I'm working. It just suddenly quits.

This is a suspicious sign of power supply failure. I would have that checked into. Others who have had similar problems have had the power supplies replaced which fixed the issue.

Can't get dedicated graphics card to work.

I can not get the dedicated graphics card to work on my laptop. I spend my night installing and uninstalling drivers, wich none of them seem to work.
To check the card if its working, I dissabled Intel HD Graphics adapter and left the AMD, instead of getting the dedicated card to work I got "Microsoft Basic Display Driver".
Please help me....
EDIT: I only reinstalled AMD drivers, I didn't touched the intel ones since they work.
My laptop: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04089426&tmp_task=prodinfoCategory&cc=us&dlc=en...

HI FXV,
Thank you for your query, I will do my best to assist you.
I understand you have already uninstalled and then downloaded and reinstalled the recommended driver to no avail.
Here is a link to a post by @Paul_Tikkanen that may also help. beta driver. This seems to have solved the issued for someone else.
Have you tried running the HP Support Assistant to aid with updates and resolving issues.
Have you tried Using Automated Troubleshooting (Windows 8) to assist with this difficulty.
You could also try Refresh Your PC to Resolve Problems (Windows 8) to resolve issues.
That last thing I can suggest before referring to HP support is a recovery back to factory. Performing an HP System Recovery (Windows 8)
During the recovery process you will get a prompt to backup your personal files to prevent data loss, if you have not done one recently, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8).
If none of the above has resolved the issue then I suggest contacting HP support for assistance. They have the ability to remotely access your system to help locate and resolve issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Update AMD graphics Card Driver

My System is hp pavilion g6 2005TX with Windows 8.1 pro 64bit
I have 2gen Core i5 processor with intel HD 3000.
And AMD Radeon HD 7670M graphics card.
My current graphics card version : 8.982.10.1600 (download from HP with driver date :03-11-2012)
Catalyst Control Center version :2012.1104.523.9449
Intel HD 300 driver version : 9.17.10.2849
This all are not the latest versions
i want the lates drivers for my graphics card.
I had downloaded latest driver from AMD's site. But after installing this driver i can't open catalyst control center. it says "No settings can be configured using CCC"No other graphics settings are working.
I tried it using AMD autodetect and download and install.it too shows same error.
Kindely someone help me to download latest versions.
And install correctly.

Hello Adarsh_Johny,
Thanks for posting on the HP Forums!
I understand you are looking for updated drivers for your notebook. Unfortunately, there are no Windows 8.1 drivers that HP supports, as indicated here: HP Pavilion g6-2005ax Notebook PC Drivers
My suggestion to you is to return the computer to Windows 7 or 8 to take full advantage of the updated drivers. Of course, you can try to install the latest Windows 8 drivers, but I can't guarantee that will work.
Please let me know if you have any other questions. Thanks!
Mario
I worked on behalf of HP.

Update graphic card driver

Hey, guys. I have a macbook pro with 330m nvidia card on board. I started to play Skyrim(a game) in windows 7 a few days ago. Knowing the graphic card driver is not updated, I have been always ponderring on if it worth a try to update the driver on my own, instead of waiting for Apple to do it. Basically, I am not sure about the risk. Will the latest official driver overheat my laptop? Also, should I install the whole package (including Physix and others), or only the graphic card driver? Anyone who have experience please help? Thx.

Boot Camp has been a great asset for we who desire to play PC games on our Macs. A problem I see emerging is the thinning down of the laptops. Faster chips and less space means more heat to get rid of. Because of this I think we are seeing some compromise in the Macs. Until the latest round of new models the MacBook Pros pretty much kept up with the gaming PCs in regards to the processor, graphics, and RAM.
Here is a comparison of what is currently available for maxed out 15" laptops from Apple and Clevo. I assume the compactness of the Mac precludes the use of the higher performing components.
2012 MacBook Pro Retina
2.7GHz Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
NVIDIA GeForce GT 650M, 1GB GDDR5
2012 Clevo P150EM
2.9GHz Core i7-3920XM Extreme
32GB 1600MHz DDR3L SDRAM
NVIDIA GTX 680M, 4GB GDDR5
As an aside I have become an Elder Scrolls enthusiast. I started out with Skyrim in January and am still working on visiting all the places on the big map. I have also acquired Oblivion, Morrowind, and Daggerfall which are in various stages of completion. Here is what hardware I run them on. Happy gaming.
Skyrim - Clevo P150HM (2011) Win7
Oblivion - MacBook Pro (2010) BootCamp/Win7
Morrowind - MacBook (2006) BootCamp/WinXP
Daggerfall - MacBook (2006) BootCamp/WinXP

Intel HD Graphics 4600 driver works as Intel Xeon E3-1200

Similar Messages

Maybe you are looking for