Intel i915, kernel output if lid opened too fast

I have an Intel graphics card, and acpid set up to turn off/on the screen based on the lid events (with vbetool's dpms ability).
At times, if I open the lid too fast, I get this output if I'm on a tty:
[drm:intel_enable_transcoder] *ERROR* failed to enable transcoder 0
I'm not quite sure what to do about it. Other than having the lid open event sleep for 1 second, that seems to have fixed it for now.
Just wanted to see if anyone else experienced this, had any advice, or thought this should be submitted as a bug report.

Similar Messages

I ran Advance System Care 3 Disk Optimizer program and now my drop down menus are too fast. How do I slow them down

I ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
Thanks,
Tony

I ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
Thanks,
Tony

Internal display off when lid opened?

Hey guys!
Just installed Lion and one thing I immidiately noticed is the way Lion handles internal display when external display is plugged in. I use a big 24-inch display with my early 2011 MacBook Pro. I like to open the lid for better WiFi connection but dont really like the display to turn on. In Lion, it automatically does so I have two displays.
Is it possible to open the lid but still keep the internal display off and only the external one on?
Thanx!

Support are quoting Apple's engineers as saying it is "expected behaviour" under Lion for the MBP's internal display to reactivate upon opening the lid, even if you want to use only your external display. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
This is despite:
- the obvious temperature-related benefits that were achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to, say, a 27" cinema display
- the wifi connectivity benefits of having the lid open
- the waste of energy and inefficient use of graphics processing power in needlessly running two active screens (ie if running your MBP in clamshell mode would otherwise make it too hot and/or noisy or you need it open for wifi)
- the negative longer-term impact on the battery and other components from running the MBP any hotter than it needs to be.
If you would like to have the previous behaviour restored, please lobby Apple to change how Lion handles clamshell mode. Options available to them include changing Lion's expected behaviour or adding a user-selectable option within System Preferences.
Feedback can be submitted here:
http://www.apple.com/feedback/macosx.html

Why Does Retina MacBook Pro (2012) Suddenly Hibernate With Lid Open?

I'd like to know why my Retina MacBook Pro (2012) at certain times suddenly go into Hibernate mode when I'm actively using it with the lid open and what I can do to prevent this.
I know this is hibernate because of what I see in the Console logs and the fact that I can't trigger a wake by using the keyboard/trackpad/mouse. Only the power button causes it to wake up.
This usually happens when I wake it from sleep and plug it into an external monitor via HDMI to HDMI connection.   The lid is open and I use both displays.    This happens about 30 seconds to a minute after I wake from sleep. At the time I'm not plugged into the power supply because I believe it's generally a good idea to let the batter drain and the recharge it. The last time this happened it was about 35% to 40% charged.
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro10,1
Processor Name:    Intel Core i7
Processor Speed:    2.6 GHz
Number of Processors:    1
Total Number of Cores:    4
L2 Cache (per Core):    256 KB
L3 Cache:    6 MB
Memory:    8 GB
Software:
OS X Yosemite (all latest updates installed)
{some 3rd party software}
Let me know if you need more information.
For the gory details of what I see in system.log, read on:
This is about the time the hibernate happens. I've replaced my laptop's name with {COMPUTER NAME}
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: notification observer: com.apple.iChat   notification: __CFNotification 0x7f87d5210a90 {name = _NSDoNotDisturbEnabledNotification}
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:    NC Disabled: NO
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:   DND Enabled: YES
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: Updating enabled: NO   (Topics: (null))
Mar 20 18:29:26 {COMPUTER NAME} WindowServer[218]: device_generate_desktop_screenshot: authw 0x7fba81c2e940(2000), shield 0x7fba81c35bd0(2001)
Mar 20 18:29:27 --- last message repeated 1 time ---
Mar 20 18:29:27 {COMPUTER NAME} WindowServer[218]: device_generate_lock_screen_screenshot: authw 0x7fba81c2e940(2000)[0, 0, 1920, 1080] shield 0x7fba81c35bd0(2001), dev [1920,1080]
Mar 20 18:29:27 {COMPUTER NAME} com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.user.502): Service "com.apple.xpc.launchd.unmanaged.loginwindow.72" tried to hijack endpoint "com.apple.tsm.uiserver" from owner: com.apple.SystemUIServer.agent
Mar 20 18:29:30 --- last message repeated 1 time ---
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: PM response took 4741 ms (30, powerd)
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007298: AirPort_Brcm43xx::powerChange: System Sleep
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007302: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1b014fb000, 0x19000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0xd8ec7000, 0x19000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1369ac0000, 0xe000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x0, 0x0]
Mar 20 18:29:31 {COMPUTER NAME} kernel[0]: hibernate image path: /var/vm/sleepimage
And when I wake it up by repeatedly pressing the power button:
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_newruntime_map time: 0 ms, IOHibernatePollerOpen(), ml_get_interrupts_enabled 0
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: IOHibernatePollerOpen(0) 19 ms
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init reading
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: PMStats: Hibernate read took 355 ms
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init pagesDone 212628 sum2 2c66736a, time: 355 ms, disk(0x20000) 447 Mb/s, comp bytes: 57749504 time: 55 ms 985 Mb/s, crypt bytes: 157388800 time: 67 ms 2228 Mb/s
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Wake reason: EC.PowerButton (User)
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: vm_compressor_fastwake_warmup (7450 - 12878) - starting
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous sleep cause: -60
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous shutdown cause: 5
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 0 us

This happened again at about 31% power, again unplugged.   Previously, I had plugged in the power before pressing the power button, but this time I pressed the power button before plugging in. The display showed me the out of power icon. Only on plugging it back in was I able to power up the laptop again.
Is it possible there's a bug either with the displayed power or how remaining power is detected?

Macbook Pro won't sleep when lid open

My 2011 Macbook Pro won't go to sleep if I leave the lid open. I have checked System Preferences>Energy Saver and the display/computer sleep is set to 10 min for both Battery and Power Adapter settings. Even if I close all the applications down, my computer will still not go to sleep. The battery just gets completely drained if I forget to close the lid. Help?

1/31/13 9:44:10 PM PST
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      0
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
Kernel Assertions: None

[SOLVED] Audio over HDMI stopped working? (Intel/i915)

My audio over HDMI was working fine until recently and I can't figure out what's stopped it from working... My configs haven't changed and aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav gives no errors, but no sound can be heard. There are no errors/messages in dmesg either.
My graphics card uses the Intel i915 chipset (Asus laptop).
Config stuff:
/etc/asound.conf:
pcm.!default {
type hw
card 0
device 3
ctl.!default {
type hw
card 0
device 3
aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Any ideas?
Last edited by Minsc (2014-06-19 01:04:29)

Yeah I checked and everything is fine... this is really weird!
I've tested audio over HDMI on windows, so I know it's not the cable/HDMI port. I've looked through my pacman.log (I tend to update daily) and the only thing I can see which could affect it is a kernel update and intel-dri. I tried downgrading those and re-tested, to no avail.
I also installed pulseaudio and pulseaudio-alsa before it stopped working. This could have broken it, but I've since uninstalled them and replaced /etc/asound.conf with my original, so that rules those out; unless there is something else that pulse could have broken?
Cheers
Last edited by Minsc (2013-01-28 07:42:59)

Not Reliably Going To Sleep With Lid Open?

I've had my new MacBook Pro for a few days. I think it is absolutely brilliant. However, last night I left it running on battery with the lid open and returned to find the battery dead. It will go to sleep if you shut the lid or select sleep from the Apple menu.
I called Apple and they talked me through numerous procedures including resetting the SMC, PRAM, deleting various plists and finally a permissions repair on the disk. The latter seemed to make it work.
However, I've found this evening that it still does not reliably go to sleep with the lid open and I really can't work out why. It doesn't seem to be linked to a particular application. Sometimes even if I only have the finder running it will not go to sleep.
When it does work, the computer takes 2-3 minutes to go to sleep after the display sleeps.
I'm running Snow Leopard with all the available updates.
Please can anyone suggest what I might do next?

Hi,
I've been struggling with same issue too, idle timer sleep just didn't work most of the time. I am a recent convert from Windows world and there were never issues with PC to go to sleep after idle timeout. With SL it was not so easy.
However, I found a reason (Or two actually) why it was not sleeping, after going through my applications and web pages one by one.
One of them is flash plugin in browsers, if I had any page open with flash, the computer would not sleep. Apparently flash somehow makes SL think it is not idle. Solution to this was to set up flash blockers to browsers. Which is not bad thing overall, flash is mostly adverts anyway on the pages I visit.
Other one was facebook, even with flash disabled. Something in their real-time updating of statuses again prevents sleeping. I tried disabling java and java script too, it might help but then facebook does not work at all. Solution is to always close facebook after using it. Not a really good one, it's easy to forget running.
Hope this helps!

I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.

I am trying to get into my Game Center app but every time I tap on the app it opens too a blank white screen. I have tried several times to reset my phone but I get the same result.

Hello there Sweebs44,
It sounds like you are tapping the Game Center app to open it, but the screen is blank. I recommend signing out of your account:
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
From: iPhone User Guide
http://help.apple.com/iphone/7/#/iph6c493cac
Then close all the running apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone sign back into your account and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Take care,
Sterling

External display only with lid open?

I feel like I must be missing something really obvious, so I apologize in advance, but I'm trying to use my external display (23" cinema display) without using the MBP display yet still keeping the lid open (mainly for the isight camera).
The first time I plugged the cinema display into the MBP it worked that way, but after I put it to sleep and then woke it up, both displays are on and I can't figure out how to turn off the MBP display without closing the lid.
I see no option for it in System Preferences > Display and the Apple key+F7 only toggles between mirrored and extended desktop modes.
Can someone point me in the right direction?
TIA!
15.4" MacBook Pro 2.16ghz Mac OS X (10.4.6)

Try this:
Plug in your external monitor. Once the Mac recognizes it and you see your desktop on the external display, close the MacBook's lid. Once both displays turn off and the sleep light starts to pulse, wake up your Mac by either clicking a button on an external mouse, or pushing the play button on your Apple remote. The external display should come on. When it does, you can open the MacBook lid and its display will stay off.

Wake/Sleep issue - Lid closed awake, lid open sleeping, wont wake

MBP/Lion - I'm using my MBP in dual monitor mode with an external monitor and power supply connected. If I close the lid and then disconnect the monitor, my MBP won't wake after opening the lid. I know that with Lion a change was made and the power stays on with an external monitor attached and the lid closed (with the adapter plugged in), but if you unplug the display, there doesn't seem a way out of this state. Even plugging the monitor back in, the display wont refresh (just black).
In this state the power managment is confused. When closed, the power light is on, with the lid opened the power light goes off, the display remains blank and I can't wake the device. The only solution is to re-boot.
This *****, as I just want to close the lid, unplug power and the monitor and leave work to go home. I end up running the battery down if I don't catch it before putting the MBP in my bag, and I always have to reboot. Anyone else with this problem? Any solutions out there?

I got a fix for you but you have to follow these instructions exactly:
1. Unplug everything from your Macbook Pro.
2. Open Terminal.
3. Type: sudo nvram boot-args="iog=0x0"
4. Enter your password.
5. Reset your Mac and plug everything back in.
6. Your computer will now be free of one more lion bug.
If for any reason you want the old functionality back Zap the PRAM (Turn on your Mac and hold down the Command, Option, P, and R keys all at the same time)

Configure a intel i915 (Solved)

I need help to configure a intel i915 chipset, I installed the 3ddesktop package, and the command "3ddesk" gives me this message:
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Daemon started. Run 3ddesk to activate.
Server not found after waiting 5 seconds.
Could not find server.
Try starting manually (3ddeskd)
Then I tried with "3ddeskd" and got:
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Daemon started. Run 3ddesk to activate.
And so it goes and goes, then the command glxgears gives me this other message:
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual
So, I guess my card is not configured properly, so how can I make it work on xorg 7?
this is my xorg.conf:
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "latam"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mouse0"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "HPvs15"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5, 35.15, 35.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** Intel i810 (generic) [i810]"
Driver "i810"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** Intel i810 (generic) [i810]"
Monitor "HPvs15"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
[/list]

Here's a copy of my Xorg.conf designed for i810/i910, just copy the contents over your xorg.conf (make backup!!) and adjust it to your needs (u may want to change the keyboard layout)
This xorg conf work with nomal as well as Xinerama by doing
startx -- -layout Xinerama
:arrow: http://arch.pastebin.com/613767

Spry accordion open on mouseover with extra content if too fast

So I already did this and got the spry to open with a hover,
Go to line 213 (or thereabouts) to find
Spry.Widget.Accordion.prototype.onPanelTabClick = function(e, panel)
and change that to
Spry.Widget.Accordion.prototype.onPanelTabMouseOver = function(e, panel)
but if you move too fast up and down the menu it opens the other contents and leaves it there see webpage: move your mouse fast up and down the menu to see. How do I make sure it is completely closed. I noticed this does happen to on a Click if you switch too fast between tabs.
http://www.abbottsportslincoln.com/index.php
Thanks for any help!
Jacey

so is there really no way to fix it? My client already has that, and it's not practical, we want to be able to see all the options for the sub-menus open when we are in one of the tabs.
Let me know if there is really no way around it. I'm actually pretty sure that the background for the next tab is stuck behind the content. Take a look at this site and see how they have a delay in there accordion.
http://www.targetcenter.com/
Thanks, Jacey

How do I display external monitor as sole display, rather than mirroring, with lid open?

How do I display external monitor as sole display, rather than mirroring, with lid open?

sudo nvram boot-args="iog=0x0" restart to take effect

HT201177 My web browser is opening too small. How do I adjust this?

After connecting my TV to my computer and adjusting resolution, my web browser is now opening too small. I can't seem to find the setting that adjusts this. Any thoughts?

Better surfing options for hard of seeing users
This may help if your doing this to help with your eyesight

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim

Intel i915, kernel output if lid opened too fast

Similar Messages

Maybe you are looking for