Intel SSD Toolbox does not report expected life remaining of SSD drive
I am trying to figure out expected life remaining of my INTEL SSDSA2BW160G3L on my X220T with Intel Core i7-2640M CPU 2.80GHz and 8GM of RAM, running Win7 64bit. I have been using my X220T for over a year. It is my only computer, so it has been used continously for a year.
Yesterday I installed the Itel SSD Toolbok 3.1.5 to check my SSD drive. Although the SMART Details provide me with the raw data, the normalized scores are all 100%. The expected life remaining shown is 100%, which does not seem to make much sense after a year of use.
I ran the Lenovo Hard Drive Quick Test (http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS025445). The SMART seems to be enable and working.
I would like to know if the Intel SSD Toolbox is working properly.
billbolton wrote:
SSDs do not "wear" in the same way that a mechanical drive does. There is nothing abnormal in an SSD showing no effective wear in terms of SMART parameters after a year of typical use.
In terms of determining remaining life, SMART parameters are really only useful for that when a drive (of any sort) is starting to get near the end of its life.
Cheers,
Bill
Bill,
Are you implying there is no need for garbage collection or wear-leveling after a year or that the SSD and/or OS take care of garbage collection and wear-leveling so the user won't notice the difference after a year?
Helix: 3697 CTO.
Thinkpad user since IBM. I do not work for Lenovo or any entity working for Lenovo.
Similar Messages
-
Bug Report: Lr3 does not report error when SDK version is too low.
Lr3 should report an error if SDK is under-version'd. For example, I have this in one of my plugins:
LrSdkVersion = 2.0,
LrSdkMinimumVersion = 2.0, -- minimum SDK version required by this plugin.
If I put Lr3.0 specific stuff in the plugin, Lr3 does not report an error, but it should - otherwise whats the point in specifying a version.
I have to take the plugin into Lr2 to test for inadvertent Lr3 specific inclusion mistakes. Thank goodness I'm not worrying about Lr1...
RobHi ,
Could you please helping me out on finding the Patches (SP4,SP5)?
ans also i have tested very oftenly, that my log in credentials are seems to be fine since its working for other reports too.
With Hunting,
MAK -
When deploy multiple updates, some updates fail with Hash does not match expected
If I deploy a few updates (less than 5) the deployment completes without any issues. If I have a lot of updates, most the updates install with no issues but some, and not always the same update, fails with an error in the CAS.log on the client
that states "Hash does not match expected" after several reties the update will download and install.
What could be causing this?
I have setup a new folder that is not on the root of the drive. This has not help with this issue but is handy in organization.
Ashley
County of San Bernardino
Assessor\Recorder\Clerk
Automated System AnalystIt you don't do anything and the hash calculates and downloads correctly then I would look to a network error of packet corruption or something wrong with the DP.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com -
Received unexpected message type does not match expected type
1.Two Biztalk Applications A,B one for sending the request(A) and other application will send the response to A.
2.I have two schema Request and Response in Aplication A which i have exposed as webservice.
3. Application B share the same response schema .
I am using WSBasicHTTP sysnchronous ports to send and receive the message.
WHen Application B send the response , i get the error "unexpected message type does not match expected type "
but i dont know why i get such error when the schemas are share by both application. Please advice
Regards
SureshHi Suresh,
Whenever you are doing request-response like calling web service etc, i would suggest to use Passthrough pipeline while sending and use XML receive for receiving the message.
Because when you are sending the message out it doesn't needs any promoted properties so you can use Passthrough this will avoid extra Assembling/Validation etc tasks performed by XMLSend pipeline.
But when you are receiving response that time it expects MessageType property to be promoted because normally you will have receive shape configured to some Typed Schema. So you will have to use XML Receive pipeline.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
ORA-19007: Schema - does not match expected T0090.xsd for non xsd owner
I have registered an xsd in /home/divload/xsd/T0090.xsd. User "prmt" is the owner of this resource. User prmt can schemavalidate xml against this xsd just as it is now. However, I have package code in "prmt_app" user account that will actually do the schemavalidate - not prmt user. When I run the exact same code using the exact same xml with the T0090.xsd above I am getting ORA-19007: Schema - does not match expected T0090.xsd. prmt_app has "all" privs on "/home", "/home/divload", "/home/divload/xsd", and "/home/divload/xsd/T0090.xsd". What am I missing?
XSD header info
<?xml version="1.0" encoding="utf-8"?>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb">
<xs:element name="T0090" xdb:defaultTable="T0090">
...XML header info
<?xml version="1.0" encoding="ISO-8859-1"?>
<T0090 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="T0090.xsd">
<PERMIT>
...The error occurs when I am inserting into this table off disk..
create table prmt.cview_xml (filename varchar2(256), xmldoc xmltype) xmltype xmldoc xmlschema "T0090.xsd" element "T0090";
Edited by: Mark Reichman on Jun 28, 2010 2:42 PMI did all that before posting the orignial post..
declare
v_schema_exists varchar2(1) := 'N';
res boolean;
schemaURL varchar2(100) := 'T0090.xsd';
schemaPath varchar2(100) := '/prmt/xsd/T0090.xsd'; --'/public/T0090.xsd';
xmlSchema xmlType := XMLTYPE(bfilename('DIR_PRMT_OUT_CVIEW','T0090.xsd'),NLS_CHARSET_ID('AL32UTF8'));
begin
begin
select 'Y'
into v_schema_exists
from sys.all_xml_schemas -- changed from user_xml_schemas
where schema_url = schemaURL;
dbms_xmlSchema.deleteSchema(schemaURL,4);
exception
when NO_DATA_FOUND then
null;
end;
if (dbms_xdb.existsResource(schemaPath)) then
dbms_xdb.deleteResource(schemaPath);
end if;
res := dbms_xdb.createResource(schemaPath,xmlSchema);
dbms_xmlschema.registerSchema ( schemaURL, xdbURIType(schemaPath).getClob(), TRUE, TRUE, FALSE, TRUE );
end;
/ I guess my understanding was that I could grant another oracle user access to my registered schema just like I can grant a single user access to a table. Evidently I only have two options. Only the schema owner can use the schema or everyone can use the schema and I cannot grant access to a single user other than myself.
Edited by: Mark Reichman on Jul 2, 2010 9:08 AM
Edited by: Mark Reichman on Jul 2, 2010 9:09 AM -
Procedure Does not return expected new rows unless I ALTER the procedure it self
Procedure Does not return expected new rows !!! unless I ALTER the procedure it self
And what exactly do you alter, the code / where clause / or ...?
Olaf Helper
[ Blog] [ Xing] [ MVP] -
ThinkVantage Toolbox does not work anymore
Hello,
I tried to start ThinkVantage Toolbox for the first time, but I receive two messages:
1) ThinkVantage Toolbox does not work anymore
2) ThinkVantage Toolbox Updater does not work anymore
I performed the latest System Update but the problem persists.
I would appreciate your help.
Thank you in advance.
Solved!
Go to Solution.NeuroKnight wrote:
I just updated as well to the newest version 6.0.5849.23
The newest version for download appears to 6.0.5802.24, and it is available here....
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73783
Cheers,
Bill
I don't work for Lenovo -
Why my XML is not loading ?? (ORA-19007: Schema - does not match expected )
Hi,
I want to load a XML document in structured XMLType. You can run my code on your database if you have a directory object called LOG_DIR. I am on Oracle 10.1 .
The schema is a simple example which describe a database table(like it will have 1 or more columns and 0 or more indexes). My schema looks like,
<xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Tables" type="Table">
<xs:annotation>
<xs:documentation>Table defination</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="table_name" type="xs:string"/>
<xs:complexType name="Table">
<xs:sequence>
<xs:element name="Column" type="Column" minOccurs="1"/>
<xs:element name="Index" type="Index" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Column">
<xs:annotation>
<xs:documentation>Column of the table</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="1"/>
<xs:element name="Type" type="xs:string" minOccurs="1"/>
<xs:element name="Capacity" type="xs:decimal" minOccurs="1"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Index">
<xs:annotation>
<xs:documentation>Index on the table</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="1"/>
<xs:element name="Type" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
I registered the schema,
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'tables.xsd',
SCHEMADOC => bfilename('LOG_DIR','tables.xsd'),
CSID => nls_charset_id('AL32UTF8')
END;
This was successfull, also the following create table was ok,
CREATE TABLE TMP_XML_TABLES
file_name VARCHAR2(2000),
load_date DATE,
xml_document XMLType
XMLType COLUMN xml_document
XMLSchema "http://xmlns.oracle.com/xdb/schemas/TDB/tables.xsd"
ELEMENT "Tables";
Now I have a XML document,
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/xdb/schemas/TDB/tables.xsd">
<table_name>trades</table_name>
<Column><Name>trade_id</Name><Type>varchar2</Type><Capacity>50</Capacity></Column>
<Column><Name>source</Name><Type>varchar2</Type><Capacity>100</Capacity></Column>
<Column><Name>trade_date</Name><Type>date</Type></Column>
<Column><Name>trader</Name><Type>varchar2</Type><Capacity>200</Capacity></Column>
<Index><Name>trades_pk</Name><Type>btree</Type></Index>
<Index><Name>trades_idx1</Name><Type>bitmap</Type></Index>
</Tables>
When I am trying to load this, I get the error,
SQL> INSERT INTO TMP_XML_TABLES
2 VALUES
3 ('tables1.xml',
4 sysdate,
5 XMLType
6 (
7 bfilename('LOG_DIR','tables1.xml'),
8 nls_charset_id('AL32UTF8')
9 )
10 );
INSERT INTO TMP_XML_TABLES
ERROR at line 1:
ORA-19007: Schema - does not match expected tables.xsd.
Can somebody please explain the cause ???
Thanks and RegardsA quick search of the forum for ORA-19007 should have allowed you to find the answer to your problem. Since you XML Schema does not declare a target namespace you need to use the xsi:noNamespaceSchemaLocation tag rather than the schemaLocation tag..
Also please do not use URLs starting http://xmlns.oracle.com for your schemaLocation hint. If you do no own your own domain I'd suggest example.org...
Finally please make sure that your XML Instance is valid per your XML Schema before posting. You can do this using tools like JDeveloper or XMLSpy. What should have been a 5 min repsonse took me over 20 mins to work through due to the errors in the XML Schema...
Anyway here's a working example for you
SQL>
SQL>
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'http://xmlns.examples.org/xdb/schemas/TDB/tables.xsd';
3 :schemaPath := '/public/testcase.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> DROP TABLE TMP_XML_TABLES
2 /
Table dropped.
SQL> call dbms_xmlSchema.deleteSchema(:schemaURL,4)
2 /
Call completed.
SQL> declare
2 res boolean;
3 xmlSchema xmlType := xmlType(
4 '<xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="
tp://xmlns.oracle.com/xdb">
5 <xs:element name="Tables" xdb:defaultTable="TABLES_TABLE">
6 <xs:annotation>
7 <xs:documentation>Table defination</xs:documentation>
8 </xs:annotation>
9 <xs:complexType>
10 <xs:complexContent>
11 <xs:extension base="Table"/>
12 </xs:complexContent>
13 </xs:complexType>
14 </xs:element>
15 <xs:complexType name="Table">
16 <xs:sequence>
17 <xs:element name="table_name" type="xs:string"/>
18 <xs:element name="Column" type="Column" maxOccurs="unbounded"/>
19 <xs:element name="Index" type="Index" minOccurs="0" maxOccurs="unbounded"/>
20 </xs:sequence>
21 </xs:complexType>
22 <xs:complexType name="Column">
23 <xs:annotation>
24 <xs:documentation>Column of the table</xs:documentation>
25 </xs:annotation>
26 <xs:sequence>
27 <xs:element name="Name" type="xs:string"/>
28 <xs:element name="Type" type="xs:string"/>
29 <xs:element name="Capacity" type="xs:decimal"/>
30 </xs:sequence>
31 </xs:complexType>
32 <xs:complexType name="Index">
33 <xs:annotation>
34 <xs:documentation>Index on the table</xs:documentation>
35 </xs:annotation>
36 <xs:sequence>
37 <xs:element name="Name" type="xs:string"/>
38 <xs:element name="Type" type="xs:string" minOccurs="0"/>
39 </xs:sequence>
40 </xs:complexType>
41 </xs:schema>
42 ');
43 begin
44 if (dbms_xdb.existsResource(:schemaPath)) then
45 dbms_xdb.deleteResource(:schemaPath);
46 end if;
47 res := dbms_xdb.createResource(:schemaPath,xmlSchema);
48 end;
49 /
PL/SQL procedure successfully completed.
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 :schemaURL,
5 xdbURIType(:schemaPath).getClob(),
6 TRUE,TRUE,FALSE,TRUE
7 );
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> CREATE TABLE TMP_XML_TABLES
2 (
3 file_name VARCHAR2(2000),
4 load_date DATE,
5 xml_document XMLType
6 )
7 XMLType COLUMN xml_document
8 XMLSchema "http://xmlns.examples.org/xdb/schemas/TDB/tables.xsd"
9 ELEMENT "Tables"
10 /
Table created.
SQL> insert into TMP_XML_TABLES values ('testcase1.xml',sysdate,xmltype(
2 '<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/T
/tables.xsd">
3 <table_name>trades</table_name>
4 <Column>
5 <Name>trade_id</Name>
6 <Type>varchar2</Type>
7 <Capacity>50</Capacity>
8 </Column>
9 <Column>
10 <Name>source</Name>
11 <Type>varchar2</Type>
12 <Capacity>100</Capacity>
13 </Column>
14 <Column>
15 <Name>trade_date</Name>
16 <Type>date</Type>
17 </Column>
18 <Column>
19 <Name>trader</Name>
20 <Type>varchar2</Type>
21 <Capacity>200</Capacity>
22 </Column>
23 <Index>
24 <Name>trades_pk</Name>
25 <Type>btree</Type>
26 </Index>
27 <Index>
28 <Name>trades_idx1</Name>
29 <Type>bitmap</Type>
30 </Index>
31 </Tables>'))
32 /
1 row created.
SQL> set long 10000 pages 0 lines 160
SQL> /
1 row created.
SQL> select * from TMP_XML_TABLES
2 /
testcase1.xml
21-APR-06
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>
testcase1.xml
21-APR-06
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>Since you are tracking metadata about the documents (name, date loaded) you might want to consider using the XDB repository to load the documents. The folllowing shows how you can do this from SQL and then create a view which contains the metadata and document content. The advantage of this approach is you can now load the documents using FTP or WebDAV.
SQL> declare
2 res boolean;
3 document xmltype := xmltype(
4 '<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/T
/tables.xsd">
5 <table_name>trades</table_name>
6 <Column>
7 <Name>trade_id</Name>
8 <Type>varchar2</Type>
9 <Capacity>50</Capacity>
10 </Column>
11 <Column>
12 <Name>source</Name>
13 <Type>varchar2</Type>
14 <Capacity>100</Capacity>
15 </Column>
16 <Column>
17 <Name>trade_date</Name>
18 <Type>date</Type>
19 </Column>
20 <Column>
21 <Name>trader</Name>
22 <Type>varchar2</Type>
23 <Capacity>200</Capacity>
24 </Column>
25 <Index>
26 <Name>trades_pk</Name>
27 <Type>btree</Type>
28 </Index>
29 <Index>
30 <Name>trades_idx1</Name>
31 <Type>bitmap</Type>
32 </Index>
33 </Tables>');
34 begin
35 res := dbms_xdb.createResource('/public/testcase.xml',document);
36 end;
37 /
PL/SQL procedure successfully completed.
SQL> create or replace view TMP_XML_TABLES_VIEW as
2 select extractValue(res,'/Resource/DisplayName') FILENAME,
3 extractValue(res,'/Resource/CreationDate') LOAD_DATE,
4 object_value XML_DOCUMENT
5 from RESOURCE_VIEW, TABLES_TABLE t
6 where extractValue(res,'/Resource/XMLRef')= ref(t)
7 /
View created.
SQL> select * from TABLES_TABLE
2 /
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>
SQL> select * from TMP_XML_TABLES_VIEW
2 /
testcase.xml
21-APR-06 02.21.37.031000 PM
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>
SQL>
SQL>
SQL> -
Explaining a WD Error: "Entity Instance Does Not Match Expected Entity"
Hello,
I'm wondering if someone can help me understand what is causing a persistent web server error that seems to be related to entities and/or instance creation. Lately, after building with screens and clicking on the top-level goal, I'll get this generic error:
An error occurred trying to process your request.
This error has been logged and is available in the application logs.
For support and assistance please contact [email protected].
I then check the Embedded Web Server Output, and see the text pasted at the bottom of this post - the key error seeming to be "java.lang.IllegalArgumentException: Entity instance does not match expected entity".
Observations:
- It seems to occur after I've made some significant changes to my data model: merging two entities, or switching relationships to being inferred.
- There are no errors or warnings in the "Error List" and all documents are compiling successfully.
- It only happens when I build with screens. I can 'build', or 'build and debug' without screens successfully.
- The most recent occurrence was after I had converted a few relationships to "Inferred" and resolved all compiling errors.
- It only occurs after clicking on the top-level goal, and sometimes a few screens afterwards. By switching most of my relationships back to non-inferred (except for one), I've been able to get some of the screens working - up until I arrive at the screen that involves creating instances for the second entity involved in the remaining inferred relationship.
- The remaining inferred relationship that I was suspecting as a cause seems to be working correctly (i.e. I can see that the instances were connected in the Data tab, even after the error has appeared in the web output).
I would be very grateful for any assistance with this error, as it's become somewhat of a time sink and I've already tried a few angles for troubleshooting it.
Thanks!
- Patrick
Embedded Web Server Output:
Deploying application
Jul 18, 2011 2:35:18 PM org.apache.catalina.loader.WebappClassLoader validateJarFile
INFO: validateJarFile(C:\projects\[project name]\Release\web-determinations\WEB-INF\lib\servlet-api.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
Server startup complete!
OK - Tomcat server started
4 [http-127.0.0.1-9000-Processor4] ERROR com.oracle.determinations.web.platform.servlet.WebDeterminationsServletUtility - java.lang.IllegalArgumentException: Entity instance does not match expected entity
java.lang.IllegalArgumentException: Entity instance does not match expected entity
at com.oracle.determinations.engine.local.RelationshipRule.backwardChainInternalItem(RelationshipRule.java:209)
at com.oracle.determinations.engine.local.RelationshipRule.backwardChainRelationshipItem(RelationshipRule.java:132)
at com.oracle.determinations.engine.local.eval.RelationshipExpression.backwardChain(RelationshipExpression.java:216)
at com.oracle.determinations.engine.local.eval.ExpressionEvaluation.backwardChain(ExpressionEvaluation.java:102)
at com.oracle.determinations.engine.local.RuleTableValue.backwardChain(RuleTableValue.java:264)
at com.oracle.determinations.engine.local.eval.ExpressionAttributeRef.backwardChain(ExpressionAttributeRef.java:122)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.ExpressionEvaluation.backwardChain(ExpressionEvaluation.java:102)
at com.oracle.determinations.engine.local.RuleTableValue.backwardChain(RuleTableValue.java:264)
at com.oracle.determinations.engine.local.eval.ExpressionAttributeRef.backwardChain(ExpressionAttributeRef.java:122)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.ExpressionEvaluation.backwardChain(ExpressionEvaluation.java:102)
at com.oracle.determinations.engine.local.RuleTableValue.backwardChain(RuleTableValue.java:264)
at com.oracle.determinations.engine.local.eval.ExpressionAttributeRef.backwardChain(ExpressionAttributeRef.java:122)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.ExpressionEvaluation.backwardChain(ExpressionEvaluation.java:102)
at com.oracle.determinations.engine.local.RuleSimpleValue.backwardChain(RuleSimpleValue.java:212)
at com.oracle.determinations.engine.local.eval.ExpressionAttributeRef.backwardChain(ExpressionAttributeRef.java:122)
at com.oracle.determinations.engine.local.eval.RelationshipExpression.backwardChain(RelationshipExpression.java:223)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.ExpressionEvaluation.backwardChain(ExpressionEvaluation.java:102)
at com.oracle.determinations.engine.local.RuleSimpleValue.backwardChain(RuleSimpleValue.java:211)
at com.oracle.determinations.engine.local.eval.ExpressionAttributeRef.backwardChain(ExpressionAttributeRef.java:122)
at com.oracle.determinations.engine.local.eval.ExpressionScopeSelect.backwardChain(ExpressionScopeSelect.java:40)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.ExpressionEvaluation.backwardChain(ExpressionEvaluation.java:102)
at com.oracle.determinations.engine.local.RuleTableValue.backwardChain(RuleTableValue.java:264)
at com.oracle.determinations.engine.local.eval.ExpressionAttributeRef.backwardChain(ExpressionAttributeRef.java:122)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.RelationshipExpression.backwardChain(RelationshipExpression.java:223)
at com.oracle.determinations.engine.local.eval.SimpleExpression.backwardChain(SimpleExpression.java:101)
at com.oracle.determinations.engine.local.eval.ExpressionEvaluation.backwardChain(ExpressionEvaluation.java:102)
at com.oracle.determinations.engine.local.RuleSimpleValue.backwardChain(RuleSimpleValue.java:211)
at com.oracle.determinations.engine.local.LocalAttribute.backwardChain(LocalAttribute.java:562)
at com.oracle.determinations.engine.local.LocalAttribute.getRelevanceReport(LocalAttribute.java:515)
at com.oracle.determinations.interview.engine.local.AttributeGoal.getNextScreen(AttributeGoal.java:113)
at com.oracle.determinations.interview.engine.local.LocalInterviewSession.getNextScreen(LocalInterviewSession.java:213)
at com.oracle.determinations.web.platform.controller.actions.InvestigateAction.submit(InvestigateAction.java:99)
at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.doPost(WebDeterminationsServlet.java:102)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:647)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at com.oracle.determinations.web.platform.util.CharsetFilter.doFilter(CharsetFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
at java.lang.Thread.run(Unknown Source)
Edited by: Patrick Devine on Jul 18, 2011 3:23 PMHi Patrick,
The bad news is that your issue is due to a bug in the Determinations Engine. The good news is that there is a workaround. Basically there’s an implied directionality for all relationships which, for inferred relationships is defined by the direction in which you declared the relationship in the properties file. The problem only happens if you write your membership rule in the reverse direction to the one in which it was originally declared. In your case because your membership rule concludes the relationship ‘the benefits of the benefit plan’ you need to make sure that your relationship was declared in that direction as well. To do that, you’ll need to delete your existing relationship in the properties file and then create it as follows:
Source: the benefit plan
Target: the benefit
Relationship Type: Inferred (Many to Many)
Text: the benefits of the benefit plan
Reverse Text: the benefit plan of the benefit
We will fix the issue in the next release.
Thanks,
Kristy -
Tecra A7 - Intel PROSet Wireless does not react upon shutdown
Hi
when shutting down my Tecra A7 the Intel PROSet/Wireless does not react but must be ended manually.
Would the download of the latest Intel driver as published by Toshiba help to solve this problem ??
Thank you in advance for your support!
Best regards,
ClausPHello Claus
You can try to remove Inter PROSet and use Windows settings for WLAN configuration.
I do not have this problem but you can also try to install latest version from Toshiba support page. -
This question is used a translator....
Current conditions
- SW1 ----- Power injector ------ AP(cisco is not another model)
- Port, AP, Power injector, Switch <-> Injector UTP cable Problems occur even after replacement
- Power injector <->AP UTP canle No exchange
- Poe was OFF the function. This is because it is being used for Power Injector. -> Do not generate failure logs
- But even if another AP is turned ON POE function, no error messages.
SW1#show logging (5 mins cycle persists)
May 4 10:37:32.527: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/17: Power given, but Power Controller does not report Power Good
May 4 10:37:42.556: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to down
May 4 10:37:43.562: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to down
May 4 10:37:50.032: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to up
May 4 10:37:52.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to up
May 4 10:38:03.238: %ILPOWER-7-DETECT: Interface Gi1/0/17: Power Device detected: IEEE PD
SW1#show cable-diagnostics tdr interface gi 1/0/17 <----- Issues AP
TDR test last run on: May 04 10:49:14
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/17 1000M Pair A 84 +/- 10 meters Pair B Normal
Pair B 84 +/- 10 meters Pair A Normal
Pair C 84 +/- 10 meters Pair D Normal
Pair D 84 +/- 10 meters Pair C Normal
SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/18 <--------- Normal AP
TDR test last run on: May 04 11:01:04
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/18 1000M Pair A 92 +/- 10 meters Pair B Normal
Pair B 92 +/- 10 meters Pair A Normal
Pair C 92 +/- 10 meters Pair D Normal
Pair D 92 +/- 10 meters Pair C Normal
SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/1 <--------- Normal AP
TDR test last run on: May 04 11:01:56
Interface Speed Local pair Pair length Remote pair Pair status
Gi1/0/1 1000M Pair A 79 +/- 10 meters Pair B Normal
Pair B 79 +/- 10 meters Pair A Normal
Pair C 79 +/- 10 meters Pair D Normal
Pair D 79 +/- 10 meters Pair C Normal
SW1#show power inline <-------- (Check every 5 seconds)
Module Available Used Remaining
(Watts) (Watts) (Watts)
1 370.0 200.2 169.8
Interface Admin Oper Power Device Class Max
(Watts)
SW1#show power inline | in 17
Gi1/0/17 auto off 0.0 n/a n/a 30.0
SW1#show power inline | in 17
Gi1/0/17 auto on 15.4 Ieee PD 0 30.0
SW1#show power inline | in 17
Gi1/0/17 auto on 15.4 Xirrus XR2426, 1.0G 0 30.0
SW1#show power inline | in 17
Gi1/0/17 auto faulty 0.0 n/a n/a 30.0
SW1#show power inline | in 17
Gi1/0/17 auto off 0.0 n/a n/a 30.0Plug the Xirrus AP directly to the switch port and see if the logs go away or not.
-
In trying to distribute apps via advertisements and run advertised programs, I'm getting the errors Hash does not match expected and hash matching failed. I'm not using binary differential replication. The package contains source files is
enabled, along with always obtain files from source directory.
This is happening on some, not all of the packages. I've tried updating the package, but to no avail. I've deleted the cache on the client as well, but that hasn't helped. I can run the advertisement from the DP without any issues.
My question is, on the hash error, can the modified date/time of a folder cause the hash error if all the files within the folder have the same modified date/time on the package source and the DP's?
Thoughts?Hello - I would like you to compare the size of packages in local DP and in the parent server ? (there could be some diff in size...may be in KBs). Also, compare the PCK file size on both the servers?
Try to follow below steps..
1. Remove the package and wait for some time (ensure that the package is removed from the DP). I would suggest you to remove PCK file related to that package as well.
2. Sometimes it may happen because of some hidden files.
Run the following on the source package
Open up a command window in the root director that contains your package.
Type Dir /S /A:H and hit enter.
Type attrib -H /S.
and refresh the package..
3. There is a tool called HASHDIR.exe for checking the hash value...
More details on the below thread.
http://social.technet.microsoft.com/Forums/en-US/configmgrswdist/thread/c1f0d7f2-5bc9-4633-bc60-84a960395df9/
Anoop C Nair - This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
answer your question. This can be beneficial to other community members reading the thread. -
FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk.
I upgraded from an i5 to an i7 15" MBP and restored my files using my time machine backup. All seemed to go ok, except I had to use the migration assistant because on the initial boot the MAC didn't recognize the backup database on the USB device. MAybe this is a hint.
Since when I start FCPX it too cannot finnd the project or event directories.
Before my upgrade, I had a choice of files either on the Macintosh disk or the 2TB USB disk.
Now only files on the Macintosh are accessible to FCPX. The USB drive is visible under events and project but it finds no projects or events.
Please help if you can.
Thanks
BarryThanks... alas no one has responded.
I think I have the structure that you are recommending.
I have a root level directory (Final Cut Events) with the files in them.
The puzzling thing is that it used to work before the migration!.
Anyway I'm going to move the contents to the root and see what happens.
On a slightly different note...
I also posted a question about CPU utilization. Can I ask a question or two?
While rendering a short clip, I noticed burst of disk activity when the render started (likely loading the media files into ram since I have about 4Gigs available, then almost no activity while the render is happening, then more disk activity when its done.
However the cpu activity is not as high as I would have expected since rendering requires a lot of cpu.
What is your experience? I know some render is done by the GPU, but in my older i5 the CPU was about 100%, now in my i7 its about 50%.
Please look at the attached utilization for CPU and disk activity.
Thanks for any thoughts... Barry -
My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it. Internet recovery asks for his Apple ID and password. He has no idea. I have an Apple ID but have never bought anything through the iTunes store so it won't accept my Apple ID. I don't know if his computer is under warranty. He does not remember if he has Applecare. I tried reinstalling Leopard -- the computer originally came with Leopard -- but the computer screen goes grey and a message comes up saying I need to restart. He wants to give this computer to me since it's useless to him. What do I do to get a system on it again?
You will need to reformat the hard drive to go back to Snow Leopard or Leopard.
Does he have a Snow Leopard Disk? He should, as there is no way to go from Leopard to Mountain Lion without it. If you can find the Snow Leopard Disk, I'd at least start with that.
You will need to use Disk Utility in the installer to format the hard drive and get rid of the recovery partition.
Boot from the installer disk by holding down the C key on restart. When it boots, Open Disk Utility (Utilities menu, at least in Snow Leopard).
Select the Hard drive and then click the Partition tab.
Select 1 Partition from the partition menu.
Select Mac OS Extended (Journaled) as the format.
Name the drive (Macintosh HD is the standard).
Click Apply to partition the drive.
When it is done, quit Disk Utility and install the OS. -
Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.
1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
Maybe you are looking for
-
Tried to Sync my ipod classic through itunes 11.2 on my new vaio laptop
Haviing tried everything from restoring multiple times, to resetting to jumping on one leg and crossing my fingers nothing has worked I got a new laptop, tranferred all my music, got the latest version of itunes 11.2, restored my ipod so it would syn
-
Can i use downloaded app in more than 1 device?
I have 2 Ipads, I have downloaded apps on itunes and I need to make sure if Im allow to use them on multiple devices or do I have to buy them in this case 2 times?
-
Hi All, I have a 4 Gig IPOD Nano and I wanted to remove some songs. Unfortunately, I deleted the playlist associated with the songs and had to manually search for songs that didn't have a playlist associated with it. Can we request that Itunes be abl
-
How can i import iphone photo to my computer
how can i import my iphone photo to my computer
-
When I am connected to wi-fi it is extremely slow to load any websites. This happens on Safari and Firefox. What else can I do to help with problem. I know it is not the wifi becuase it works fine on other computers.