Interface with CAD Software

Hi Experts,
Could you plz tell me,
1) Is there any possibility to Interface with CAD Software ? How ?
It is too urgent. Plz help me.
Note : Rewarding high points for helpful answer.
Thanks & regards
Murali

Hi,
Check this links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d03a090-0201-0010-0597-f87213b26d53
SAPGUI Failed error while accessing CAD Desktop from UnigraphicsApplication
CIC and CAD (CTI Integration)

Similar Messages

Testing CAD-Desktop interface with CAD-system

Hi,
does anybody know if it is possible to get a CAD-system for free to test the CAD-Desktop interface of SAP?
I am not a key CAD user, I just want to look how CAD Desktop works.
Regards,
Oliver

You do not need CAD system to work with CAD Desktop
call transaction SE37
In Function module enter : CDESK_SHOW
or CDESK_TEST
Fill the import paramenters
Execute it
CAD Desktop will appear

EDI IDOC generation for interface with Vendor software help needed.

EDI IDOC help needed.
We are NOT an EDI shop, but have a project to output data to Sales Force.com
Sales Force requests IDOC output - eg. 810 Outbound Invoice.
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
I am very new to EDI so any help would be greatly appreciated.
Thanks.
Scott.

Hi Scott,
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
Cheers, harald

CAPA System (CATSWEB) Interface with SAP

Hi Experts
Anybody worked on SAP interface with CATSWEB software (for CAPA system)?
Please guide me to do the same.
Thanks in advance.
Regards
Bala

Hi JJ,
I may be just re-iterating what has already been said, but for clarity I will put down the points again, since I was also faced with the same confusion regarding how barcode and sap will work.
1. Barcode Scanner has nothing to do with SAP or any software.
   In simple terms, it is just like a keyboard. To demo;
    a) Plug in the barcode scanner in the USB port
    b) Open Notepad in windows
    c) The cursor will be inside the notepad
    d) Now scan the bar code against any barcode image.
          (Suppose the barcode image contains the information XYZABC)
   e) As soon as you scan, the characters   X Y Z A B C (without spaces)
      will AUTOMATICALLY GET TYPED on the screen, inside the notepad, at the place of cursor.
    Hence, the SCANNER just acts as a KEYBOARD.
   and autommatically types in the characters WHEREVER the CURSOR is.
   We can test this using notepad, Excel, word or any where the cursor can appear.
   We can test in any standard sap screen on any text field also, etc.
2. Saving the data in SAP.
    a) First we have to figure out how to save data in SAP,
        considering we are entering data MANUALLY.
   b) This can be a STANDARD Transaction or a Z transaction.
   c) Suppose the field / information is material number,
     then instead of TYPING the material number on the screen, in the field,
    we simply place the cursor on that field.
d) then we simply scan the image (containing information on material n umber) and hooooooray,
    it gets automatically TYPED IN on that field.
    Thats it. Other fields we may have to enter manually and press the SAVE button to save the data.
Scanner just saves TYPING the information manually, and hence reduces time and error both.
Hope this helps.
Regards,
Amit Mittal.

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

Interface with Xero Accounting Software

Hi,
I am looking for anyone who has experience in an API interface with BC and Xero accounting software.
Regards, Patrick

Hi Patrick,
Just wondering if you had any success with your Xero integration? I'm looking to implement the same thing and would love to be pointed in the right direction.
Onesaas are currently redeveloping their method, so that is not an option at the moment.
Cheers

T43-W7 (new install) Fingerprint Software not interfacing with power-on password

Went through a remarkably painless upgrade of my old T-43 to W7 yesterday. After the W7 install, I added the Lenovo Toolkit, and let it load the recommended drivers/updates. Then to regain use of the fingerprint function, I d/l'd the latest version of CSS, which seemed to install just fine (per upgrade recommendations, I uninstalled the fingerprints/power-on password prior to upgrade).
In going through the enrollment process, the only checkboxes that appear above each "finger" are for Windows, not for the power-on password. The power-on password isenabled and set in BIOS for both the computer and the hard drive (password identical to the Windows User password). Tried with the Security Chip both Enabled and Disabled, and also tried "Clearing" the security Chip, to no avail.
The result so far is that fingerprint login is working great for W7, but no longer works at all for power on, as it did under W2k. I have an X301 that I upgraded from Vista to W7 on which all of this works perfectly, so I am pretty sure I know what should be possible, but maybe this is beyond the hardware function of W7 with the T43? Am I missing something?

Vince69,
Thank you again for your suggestion. I tried updating the driver using the package you pointed to, and did not have any luck. Kept getting "Driver not found", (and include subdirs was checked). Also tried manually dropping into each subir in the file, and still no luck.
I came across an entry in http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/aa965e55-de21-4dd0-93e2-05e6d14... which seems to address the "Unkown Device" issue. Go about halfway down the page, and the instructions provided by James Norman seemed to work for me--at least it made the error message go away.
But the original problem of the Fingerprint s/w interfacing with power-on password is still there. After fixing the device driver problem, I reinstalled Fingerprint Software (I had uninstalled it before fixing the Device Driver issue), and I have the same behavior and selection choices under "Settings" as I had before--none of the settings include anything to do with power-on password.
Any more suggestions?

Not too hot about the jazz the Apple drum loops, does anyone know of a good drum software to interface with logic? Or, a loops source to get quality brush samples.

Logic has no decent jazz brushes in there drum loops!! What to do???

Hi j232..for interfacing drum i would suggest Superior drummer 2.0. It has all the loops u want plus it keeps getting the expansion packs (i mean u have to buy it )which are genre based so as of now it has everything from vintage kits to new age. Also it says on the site(toontrack.com) that its tested with logic.
I used it in mixcraft on my PC. and it was very easy, real and satisfying for me. Ordered it now for my new mac to interface with logic pro.
hope that helps
cheers

How to connect my app interface with the code in flash builder?

I'm a beginner and learning my way around actionscript,mxml and flash builder.So this may seem foolish but please bear with me,I'm creating a very simple ios app using flash builder,I have created a simple app interface (A background and a custom navigation bar)using photoshop for my app,now the question is how do i import it into flash builder so that i can connect it with the code i have written? or is there another simpler way to create a app interface using other products like fireworks or catalyst?
In short, I want to know how is an app interface created(wt software) and how is it connected with its code using flash builder.Any help would be greatly appreciated, and tutorials would be swell
Thanks!

Can you use stage.width or stage.stageWidth?

Officejet 7000 freezes CMS Intellicad CAD software after printing.

I am using a HP Officejet 7000 A3 printer with ethernet connection to my XP workstation to print from CMA Intellicad CAD software. To print, I have to change the printer preferences to an A3 mono landscape shortcut in the printer setup. When the job finishes printing, Intellicad freezes and has to be forcibly shut down. Perhaps an incompatible DLL?
Jim Beeston

Hello,
There is an print driver update available below for your product, try to install it and see if this helps:
Download Page:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-77813-2&cc=us&dlc=en&lc=en&...
Direct Link: ftp://ftp.hp.com/pub/softlib/software11/COL31335/bi-77813-2/OJ7000vE809a_Full_14.exe
Also, does it freeze with A3 paper only or any paper size?
Let me know if this helps.
I work for HP.

Implementing DOM Interface with existing Java classes

I had planned on using some tree-like Java classes as a Document Object Model, which would give me access to all sorts of XML and DOM tools like parsers and XSLT transformers. Initially, I thought all that would be neccessary is to implement all the DOM Interfaces in org.w3c.dom and then I would have a set of classes that conformed to DOM Level 1. It was my understanding that interfaces such as DOMImplementation and Document would interface with various XML tools, allowing creation of a class that implements Document and then Document would have its various factory methods that know how to create the various DOM nodes such as Element, Attr, Text, NamedNodeMap, NodeList, etc.
The problem I'm seeing now is that the JAXP specification (which is what the latest Xerces and Xalan tools conform to) has something called a DocumentBuilder and DocumentBuilderFactory that appear to be necessary to tell the framework what type of class to instantiate that implements the Document DOM interface. Those appear to have a lot of methods that deal with parsing of XML documents and I didn't really want to write or even subclass any existing Parsers in order to get the functionality of traversing and transforming a set of classes that implement the DOM interface.
Am I missing something here? Is it possible to plug in any (set of classes for) DOMImplementation and get them to work with the various DOM and XML tools out there?
Is there an easier way to allow parts of an application access to internal data structures but have the more generic tools or APIs, such as XSL transformers, access that same set of classes as a DOM with the generic DOM interface methods?
Can someone provide me with some guidance here? I'm in the process of finalizing some design on a system and need to know if this is possible or if I need to alter my design.
Thanks.

If I understand you correctly, I think I am working on a similar issue. I am unhappy with the methods given by the DOM for retrieving data from the XML file and for building a file. Our software has a bunch of code that uses these classes and it is extremely ugly. My solution was to create a facade on top of the DOM model. Essentially I have some simple classes that store all the pertinent info (for me) about the XML structure. Essentially that is the element or attribute name, its values and in the case of the element, it's children. This makes it easier for me to build and retreive the data. What I then built was a loader class and a builder class. The loader takes an XML file and parses it in using the DOM classes and builds a structure using my classes and returns the root element. The builder takes a root element and creates a DOM object out of it. This frees me of having to code around the DOM classes all over the place and makes it simple to upgrade our XML code if the DOM changes or a better DOM is released. I am using factories to facilitate this and allow me to have loaders for specific types of XML documents so that I can have a class for each which further simplifies the XML related tasks of other developers on my team.

Scanning interface with epaon printer

I have a WF-7520 & WF-4530 & WF-3640 All-in-One Printers. I had been using the WF-4530 for scanning using Adobe Acrobat X, version 10.1.12. The combination of Adobe and WF-4530 worked perfectly for several years. Then the WF-4530 started profusely leaking yellow ink (a product defect) and I replaced it with the WF-3640. The WF-3640 and the WF-4530 does not interface with adobe like the WF-4530 did. A lot of the interface is greyed out and I get the message "WIA Scanner Driver might face problems using 'Hide Scanner's Native Interface' mode. Switching to 'Show Scanner's Native Interface' mode.
I have searched through the manual, when on line and to youtube and can't find information on how to fix the interface problem. Can you help me?

How could anyone "Be Well" with your response/solution? Acrobat does not scan? Well that's obvious. But something is really screwed up here and I also have this same stupid problem. And for well over a decade I've used various versions of Acrobat on numerous scanners and printers, and there are basic requirements set for communicating scanning and printing for both Acrobat and scanners and printers. Are you telling this person that Adobe software has no responsibility to recognize scanner or printer interfaces either with a USB or wireless? This whole interface issue should be a no-brainer and apparently Adobe is the problem!
Ed Horgan (see my problem)

Overheating MacBook running Windows XP with CAD program

Every time I run the Autosketch program with Windows XP, the laptop overheats and the fan becomes extremely noisy. The over heating occurs only when in Windows.
What can I do to overcome this problem?
Thanks for your assistance.

welcome to windoze.
you'll have to contact the software vendor, it's their app doing it, must be running the CPU / GPU pretty hard. My guess is that the fix is probably a desktop machine with good power & cooling.
tho a good machine, macbook is a consumer oriented machine that wasn't designed to run pro CAD software.
Message was edited by: kmac1036

When to use abstract classes instead of interfaces with extension methods in C#?

"Abstract class" and "interface" are similar concepts, with interface being the more abstract of the two. One differentiating factor is that abstract classes provide method implementations for derived classes when needed. In C#, however,
this differentiating factor has been reduced by the recent introduction of extension methods, which enable implementations to be provided for interface methods. Another differentiating factor is that a class can inherit only one abstract class (i.e., there
is no multiple inheritance), but it can implement multiple interfaces. This makes interfaces less restrictive and more flexible. So, in C#, when should we use abstract classes
instead of interfaces with extension methods?
A notable example of the interface + extension method model is LINQ, where query functionality is provided for any type that implements IEnumerable via
a multitude of extension methods.

Hi
Well I believe Interfaces have more uses in software design. You could decouple your component implementing against interfaces so that
you have more flexibility on changing your code with less risk. Like Inversion of Control patterns where you can use interfaces and then when you decide you can change the concrete implementation that you want to use. Or other uses for interfaces is you could
use Interceptors using interfaces (Unity
Interceptor) to do different things where not all of these is feasible or at least as straightforward using abstract classes.
Regards
Aram

Can a website built with adobe muse interface with a database such as an Excel spreadsheet?

Is it possible for a website built in Adobe Muse to interface with a database? I need to turn a rather robust excel spreadsheet into an easy-to-use website that links to a database that can be updated easily and regularly. Thanks.

Hi,
Muse is a designing software. You can design websites in Muse and host it on any server of your choice. There is no native feature in Muse to convert a spreadsheet into a website. If you are good with coding, you can develop it outside Muse and call it in Muse site using iframes, if at all it is helpful to you.
Regards,
Aish

Interface with CAD Software

Similar Messages

Maybe you are looking for