Intermittant GPIB Errors "type mismatch"

The VB6 application I'm writing to control an Anritsu MP1570A Sonet Analyzer is now working moderately well, but I intermittently get the GPIB error,
"Unable to talk to GPIB device.||Type mismatch."
I find that this error does not occur if the program is single stepped. I have tried adding delays after each GPIB command and have played around with the duration. Delays seem to improve the situation but not entirely and not consistently. I'm not certain, but it seems like the problem may be less pronounced when the application is running standalone, i.e., not in the development environment. NI Spy reports no errors, by the way.
Has anyone seen anything similar or have an idea what the fix might be?
Thanks to all
in advance,
JG"

Hi Jerry,
I don't know of a specific reason why this may happen..but the first step would be to try and narrow this down...
Do you have any casts in your code ?
Especially from string to double? (from data you are getting back perhaps ?)
Its possible that if there is a timing issue, then sometimes you may get invalid , or unexpected data back, so if you have a cast such as dblValue = Cdbl(strText) * 2 it may work most of the times, but fail, if strText is not a number in the unexpected case...
The other case could be that, it is a Gpib Write or a Gpib Command thats failing with the type mismatch error(The command itself will not take place if there is a type mismatch error - so NI-Spy will look fine...). This could be true in the case, where data you send out is
not a string literal, and something that you calculate in your code..
The Read should always work, since it returns a variant..
So those are two places you could look at for potential problems...i.e. (1) the GPIB Writes,especially those where the command is not a literal string and (2) any casts, or a combination of the two...
Hope this helps some...
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

Similar Messages

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).

Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
Vikram

To load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected]

Error:Type mismatch: cannot convert from Long to Long

hi friends,
I've a problem.I've a JSP that does some long converions,and its working fine when i make it run on my machine i.e
(Running Tomcat5.0),but when I deploy this file on the server which runs Tomcat 5.5.7,it throws this error:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 20 in the jsp file: /abc.jsp
Generated servlet error:
Type mismatch: cannot convert from Long to Long
Can anyone of you,tell me where i am going wrong???

Here is an example of doing it with a JavaBean... the bean looks like this:
package net.thelukes.steven;
import java.io.Serializable;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
public class FormHandlerBean implements Serializable {
     private static final long serialVersionUID = 1L;
     private Date startTime = null;
     private DateFormat dateFormatter;
     public FormHandlerBean() {
          setDateFormat("yyyy-MM-dd hh:mm:ss");
     public void setStart(String strt) {
          setStartAsString(strt);
     private void setStartAsString(String strt) {
          setStartAsDate(getDate(strt));
     private void setStartAsDate(Date d) {
          startTime = d;
     private Date getDate(String s) {
          Date d = null;
               try {
                    d = dateFormatter.parse(s);
               } catch (ParseException pe) {
                    System.err.print("Error Parsing Date for "+s);
                    System.err.println(". Using default date (right now)");
                    pe.printStackTrace(System.err);
                    d = new Date();
          return d;
     public long getStartAsLong() {
          return getStart().getTime();
     public String getStartAsString() {
          return Long.toString(getStartAsLong());
     public Date getStart() {
          return startTime;
     public void setDateFormat(String format) {
          dateFormatter = new SimpleDateFormat(format);
}You would only need to make the getStartXXX methods public that need to be accessed from the JSP. For example, if you will not need to get the Long value of the time, then you do not need to make getStartAsLong public...
The JSP looks like this:
<html>
<head>
    <title>I got the Form</title>
</head>
<body>
    <h3>The Output</h3>
    <jsp:useBean class="net.thelukes.steven.FormHandlerBean" id="formHandler"/>
    <%
         formHandler.setStart(request.getParameter("start"));
    %>
    <table>
      <tr><td>Start as String</td><td><jsp:getProperty name="formHandler" property="startAsString"/></td></tr>
      <tr><td>Start as Date</td><td><jsp:getProperty name="formHandler" property="start"/></td></tr>
      <tr><td>Start as long</td><td><jsp:getProperty name="formHandler" property="startAsLong"/></td></tr>
    </table>
</body>
</html>If this were a servlet processing the form rather than a JSP, I might throw the ParseException that might occur in getDate and catch it in the Servlet, with which I could then forward back to the form telling the user they entered mis-formatted text value... But since JSPs should be mainly display, I catch the exception internally in the Bean and assign a safe value...

Error type mismatch unparseable number

we are upgrading to crystal 2008 and i am running my report thru info view using activex viewer - i have some parameters that i check set to null values when i do this i get the following
error
error type mismatch unparseable number
this report calls a store procedure
has anyone seen this error

Hi Dilia,
I'm not sure if I understand you correct. You are upgarding to CR2008 but running your reports through infoview active X viewer. Do you mean you created your reports in CR2008 and exported them to your BOE XIR3 enterprise system and you face the problem there?
Coudl you clarify this please and let me know which BOE version you use?
Re. the stored procedure....
If you got a SP with IN parameters (see example below) please make sure you handle actually parameters with NULL values in your SP.
Create procedure test (IN Name VARCHAR(30))
P1:BEGIN
     DECLARE CURSOR ....
     IF (NAME IS NULL) THEN
         set dynstatement = 'select * from testtable';

OEM error " Type Mismatch "

Hi ,
I have OEM v1.6 on Oracle 8.0.5 on NT. While creating the job,
when I hit the schedule tab, I get the following eror message
" Type Mismatch " ( No error number )
How to avoid this ? Is there any thing that needs to be set up
to avoid this error messgae.
I configured all the files (
tnsnames.ora,listner.ora,sqlnet.ora,snmp_ro.ora,snmp_rw.ora,servi
ces.ora ) correctly.
Also there is no proper documentation on this error.
Has any one ever got this problem . Please let me know, if you
have a solution.
Thanks
Chandra Kapireddy
null

You need to download the latest patch. Sorry, do not have
the I.P. address handy. However, oracle support will
gladly give you the I.P. address.
Chandra Kapireddy (guest) wrote:
: Hi ,
: I have OEM v1.6 on Oracle 8.0.5 on NT. While creating the
job,
: when I hit the schedule tab, I get the following eror message
: " Type Mismatch " ( No error number )
: How to avoid this ? Is there any thing that needs to be set up
: to avoid this error messgae.
: I configured all the files (
tnsnames.ora,listner.ora,sqlnet.ora,snmp_ro.ora,snmp_rw.ora,servi
: ces.ora ) correctly.
: Also there is no proper documentation on this error.
: Has any one ever got this problem . Please let me know, if you
: have a solution.
: Thanks
: Chandra Kapireddy
null

Intermittent GPIB error 6 (EABO)

my system: Mac OS 8.6, Labview 5.1, NI-488.2 for Mac OS version 7.6.3, PCI-GPIB card, Keithley 2182 Nanovoltmeter and Keithley 24xx Sourcemeters.
I have a Labview application (modeled on Keithley's application note "Automatic Resistance Measurements on High Temperature Superconductors") which runs well with >99% reliability. The other times it hangs on a GPIB read with a EABO error. The Keithley instruments will complain "Query interrupted" or "Query unterminated". These problems seem to be more prevalent if the computer is distracted with mouse action or other applications, but it'll fail even without such challenges.
Since the application runs, I know my syntax is good. I've tried increasing the timeouts, but this does not pr
ovide immunity. Software delays help somewhat, but with an unacceptable duty cycle penalty. I suspected that I was getting spurious SRQ's for a while, but the GPIB reads that fail most frequently are not those preceded by Wait RQS.
All my GPIB functions are the old style (not 488.2). I'm not using VISA anywhere, since I've found the VISA functions to be even less reliable on my system.
Any suggestions?

Hello,
I realize I getting into this stream after some correspondence, and that you are asking another poster a question. But, if you are simply trying to get your LabVIEW program not to stop and indicate an error, rather continue and discard it, all you have to do is monitor the error cluster, for example, by wiring it to an error cluster selector input, and then in the error case, simply pass out a fresh, new error cluster constant with status = false (no error), code = 0, and an empty source string. The easiest way to do this is to first wire through the no error case to create a tunnel at the output, and then right click to create a constant in the error case. Attached is a screenshot showing both the the error case and no error cases in a quick example.
I hope this helps! Repost if you are having any further or continued problems!
Best Regards,
Jassem
Best,
JLS
Sixclear
Attachments:
Ignore Errors.PNG ‏5 KB

Unbounded wildcard type: type mismatch error

I have a problem with Generics which to me seems to be caused by type erasure and necessary reification, but I can't find a solution.
In order to keep the problem simple I've removed all unnecessary functions from the code and just made sure it still compiles - the only method that does not compile (and kept its whole code) is the method processContents() that causes my problem.
I hope that the code is self-explanatory enough without comments.
public interface Iterator<T> {
     public T next();
     public boolean hasNext();
public interface FunctionInterface<T> {
     T apply(T argument);
public class DataStructure<T> {
     private T content;
     public DataStructure(T content) {
          this.content = content;
     public T get() {
          return content;
     public Iterator<DataStructure<T>> contents() {
          return new Iterator<DataStructure<T>>() {
               @Override
               public boolean hasNext() {
                    return false;
               @Override
               public DataStructure<T> next() {
                    return null;
}The problem is caused in the methode processContents() of the methode SubDataStructure, a sub-class of DataStructure.
public class SubDataStructure<T extends FunctionInterface<? super T>> extends
          DataStructure<T> implements FunctionInterface<SubDataStructure<T>> {
     public SubDataStructure(T content) {
          super(content);
     public T processContents() {
          Iterator<DataStructure<T>> iter = contents();
          T value = get();
          while (iter.hasNext()) {
               T otherValue = iter.next().get();
               // following line causes ERROR: Type mismatch: cannot convert from
               // capture#1-of ? super T to T ReducedDataStructure.java
               value = value.apply(otherValue);
          return this.get();
     @Override
     public SubDataStructure<T> apply(SubDataStructure<T> argument) {
          // arbitrary action
          return argument;
}As you see the commented line causes an error saying "Type mismatch: cannot convert from capture#1-of ? super T to T ReducedDataStructure.java" - from my understanding the type should be correct but got lost at compile-time, but would have to be restored at run-time. If so, a type-cast should solve the problem, but I'd prefer to find a clean solution without unchecked casts.
I've tried to find an answer in various books and the linked FAQ, but haven't found it yet - I admit that after a few hours of trying I got a bit frustrated, so I hope that this is a more common problem to developers and that somebody might be able to help. Any suggestions how do solve this problem? I'd be grateful for your answers.
Bob
Edited by: RobertSingleton on Nov 23, 2009 2:17 PM
Edited by: RobertSingleton on Nov 23, 2009 2:21 PM

RobertSingleton wrote:
jtahlborn wrote:
you have defined T to have a lower bound of "FunctionInterface<? super T>", value is of the type T, therefore the return type of value.apply (which comes from FunctionInterface) is "? super T". a value of "? super T" returned from the "apply" method cannot be re-assigned to "value", which has type T.Thanks, but I understood it so far. The question to me is, whether it is possible to solve the problem as shown here.
are you sure you don't want the class typedef to be "T extends FunctionInterface<? extends T>"?Yes, but would you have other suggestions? DataStructure manages Objects, SubDataStructure adds a few new methods, FunctionInterface is an Interface like Comparable. Maybe that's a bit too general to see whether the current solution is appropriate or not. But no matter how the a better solution would look like, I'd be very curious how to solve the problem in its current settings, since I'm positive I could apply the solution in the future to different problems with the same cause.the problem is that you have defined FunctionInterface in this case to return anything up to Object (? super T). "super" is good for saying "give me an object which can handle this type or any of its parent types". it's generally not so good for a return type, as you are essentially saying "i can return anything here". you want to repeatedly apply FunctionInterface, but your definition allows you to return something which may not implement FunctionInterface. so, you code cannot work with your current definitions. without having a better understanding of what you are trying to do, i can't really put forward any meaningful suggestions for fixing the code.

Type mismatch (Error: 80041005; Source: WMI)

I've created a Configuration Baseline for workstations that checks for the existence of PageFile.Sys on the root of C:\
I've created a Configuration Baseline for servers that checks for the existence of PageFile.Sys on the root of D:\
The compliance reports for several servers and workstations indicates an Error, 'Type mismatch'.
DcmWmiProvider.log from a client on a Windows Server:
Initialize called for the provider 7/27/2012 7:16:01 AM
CreateInstanceEnumAsync called for the provider 7/27/2012 7:16:01 AM
Query supplied is: select * from CCM_File_Setting where (((Path = "D:\\" AND Name = "pagefile.sys") AND SearchDepth = 0) AND FileSystemRedirectionMode = 1) 7/27/2012 7:16:01 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: D:\ evaluated to : D:\ 7/27/2012 7:16:01 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %WinDir%\System32 evaluated to : C:\Windows\System32 7/27/2012 7:16:01 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %ProgramFiles% evaluated to : C:\Program Files 7/27/2012 7:16:01 AM
Query for lantern's provider is (redirected path): Select * from FileSystem_FileMetadata where BasePath = "D:\\" and Name = "pagefile.sys" 7/27/2012 7:16:01 AM
Failed to serialize discovered filesystem object () to wmi object, error: 0x80041005 7/27/2012 7:16:02 AM
CPermissionWMIProvider::ExecQueryAsync - failed (0x80041005). 7/27/2012 7:16:02 AM
Failed to precess CFileSystemWMIProvider::ExecQueryAsync.
Type mismatch (Error: 80041005; Source: WMI) 7/27/2012 7:16:02 AM
0x80041005:
Type mismatch
Source: Windows Management (WMI)
DcmWmiProvider.log from a Windows 7 client:
CreateInstanceEnumAsync called for the provider 7/27/2012 11:12:15 AM
Query supplied is: select * from CCM_File_Setting where (((Path = "C:\\" AND Name = "pagefile.sys") AND SearchDepth = 0) AND FileSystemRedirectionMode = 1) 7/27/2012 11:12:15 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: C:\ evaluated to : C:\ 7/27/2012 11:12:15 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %WinDir%\System32 evaluated to : C:\Windows\System32 7/27/2012 11:12:15 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %ProgramFiles% evaluated to : C:\Program Files 7/27/2012 11:12:15 AM
Query for lantern's provider is (redirected path): Select * from FileSystem_FileMetadata where BasePath = "C:\\" and Name = "pagefile.sys" 7/27/2012 11:12:15 AM
Failed to serialize discovered filesystem object (c:\pagefile.sys) to wmi object, error: 0x80041005 7/27/2012 11:12:16 AM
CPermissionWMIProvider::ExecQueryAsync - failed (0x80041005). 7/27/2012 11:12:16 AM
Failed to precess CFileSystemWMIProvider::ExecQueryAsync.
Type mismatch (Error: 80041005; Source: WMI) 7/27/2012 11:12:16 AM
CreateInstanceEnumAsync called for the provider 7/27/2012 11:12:17 AM
Query supplied is: select * from CCM_File_Setting where (((Path = "C:\\" AND Name = "pagefile.sys") AND SearchDepth = 0) AND FileSystemRedirectionMode = 1) 7/27/2012 11:12:17 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: C:\ evaluated to : C:\ 7/27/2012 11:12:17 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %WinDir%\System32 evaluated to : C:\Windows\System32 7/27/2012 11:12:17 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %ProgramFiles% evaluated to : C:\Program Files 7/27/2012 11:12:17 AM
Query for lantern's provider is (redirected path): Select * from FileSystem_FileMetadata where BasePath = "C:\\" and Name = "pagefile.sys" 7/27/2012 11:12:17 AM
Failed to serialize discovered filesystem object (c:\pagefile.sys) to wmi object, error: 0x80041005 7/27/2012 11:12:18 AM
CPermissionWMIProvider::ExecQueryAsync - failed (0x80041005). 7/27/2012 11:12:18 AM
Failed to precess CFileSystemWMIProvider::ExecQueryAsync.
Type mismatch (Error: 80041005; Source: WMI) 7/27/2012 11:12:18 AM
Initialize called for the provider 7/27/2012 11:18:15 AM
CreateInstanceEnumAsync called for the provider 7/27/2012 11:18:15 AM
Query supplied is: select * from CCM_File_Setting where (((Path = "C:\\" AND Name = "pagefile.sys") AND SearchDepth = 0) AND FileSystemRedirectionMode = 1) 7/27/2012 11:18:15 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: C:\ evaluated to : C:\ 7/27/2012 11:18:15 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %WinDir%\System32 evaluated to : C:\Windows\System32 7/27/2012 11:18:15 AM
CAppExecutionLibrary::ExpandEnvironmentVariables: %ProgramFiles% evaluated to : C:\Program Files 7/27/2012 11:18:15 AM
Query for lantern's provider is (redirected path): Select * from FileSystem_FileMetadata where BasePath = "C:\\" and Name = "pagefile.sys" 7/27/2012 11:18:15 AM
Failed to serialize discovered filesystem object (c:\pagefile.sys) to wmi object, error: 0x80041005 7/27/2012 11:18:16 AM
CPermissionWMIProvider::ExecQueryAsync - failed (0x80041005). 7/27/2012 11:18:16 AM
Failed to precess CFileSystemWMIProvider::ExecQueryAsync.
Type mismatch (Error: 80041005; Source: WMI) 7/27/2012 11:18:16 AM
Does anyone know why this is happening?
Terry Wallner

My SCCM 2012 version is 5.0.7958.1000, however, I'm encountering the same error as well..
"Failed to do HandleExecQueryAsync().
Type mismatch (Error: 80041005; Source: WMI) DcmWQLQueryProvider 3/19/2015 11:45:11 AM 4244 (0x1094)
Failed to process CWqlQueryProvider::ExecQueryAsync.
Type mismatch (Error: 80041005; Source: WMI) DcmWQLQueryProvider 3/19/2015 11:45:11 AM 4244 (0x1094)
Failed in discovering instance.
Type mismatch (Error: 80041005; Source: WMI) DcmWQLQueryProvider 3/19/2015 11:45:12 AM 4244 (0x1094)"

Type Mismatch error while saving a BPC Report using eTools

Hi,
Iam getting a 'type mismatch' error when trying to save a BPC Excel workbook using eTools>Save Dynamic Template >Company>eExcel. I am saving it as an .xlsx file.
Can anyone please help out and let me know why I am getting this error.
Thanks
Arvind

Hi,
You need to save the file as .xls extension.

Type Mismatch error while calling a Java Function from Visual Basic 6.0...

Hi,
I'm having a problem in calling the Java Applet's Function from Visual Basic. First, I'm getting the handle of the Java Applet and components of it using "Document.Applets(n)" which is a HTML function. I'm calling this function from Visual Basic. My code is something like this...
' // Web1 is IE Browser in my Form.
Dim Ap,Comp
Dim Bol as Boolean
Bol = true
Ap = Web1.Document.Applets(0).getWindow() ' \\ Gets the Parent Window.
Ap.setTitle("My Java Applet") ' \\ Sets the Title of the window.
msgbox Ap.getVisibility() ' \\ This will return a Java boolean ( true or false )
Ap.setVisibility(Bol) ' \\ Function Syntax is : void setVisibility(boolean b)
Here in my code , i'm able to call any function that which accepts Integer or String but not boolean. So, i m facing problem with Ap.setVisibility() function. It gives me a "Type mismatch error" while executing it. Can you please tell me a way to do this from Visual Basic !
I'm using Visual Basic 6.0, Windows 2000 , J2SDK 1.4.2_05.
Please help me Friends.
Thanks and Regards,
Srinivas Annam.

Hi
I am not sure about this solution. try this
Declare a variable as variant and store the boolean value in that variable and then use in ur method.
Post ur reply in this forum.
bye for now
sat

How can I fix a xquery resulting error ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence - got multi-item sequence

Hello,
How can I improve the XQuery below in order to obtain a minimised return to escape from both errors ORA-19279 and ORA-01706?
XQUERY for $book in fn:collection("oradb:/HR/TB_XML")//article let $cont := $book/bdy where $cont   [ora:contains(text(), "(near((The,power,Love),10, TRUE))") > 0] return $book
ERROR:
ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence
- got multi-item sequence
XQUERY for $book in fn:collection("oradb:/HR/TB_XML")//article let $cont := $book/bdy where $cont   [ora:contains(., "(near((The,power,Love),10, TRUE))") > 0] return $book//bdy
/*ERROR:
ORA-01706: user function result value was too large
Regards,
Daiane

below query works for 1 iteration . but for multiple sets i am getting following error .
When you want to present repeating groups in relational format, you have to extract the sequence of items in the main XQuery expression.
Each item is then passed to the COLUMNS clause to be further shredded into columns.
This should work as expected :
select x.*
from abc t
   , xmltable(
       xmlnamespaces(
         default 'urn:swift:xsd:fin.970.2011'
       , 'urn:swift:xsd:mtmsg.2011' as "ns0"
     , '/ns0:FinMessage/ns0:Block4/Document/MT970/F61a/F61'
       passing t.col1
       columns F61ValueDate                Varchar(40) Path 'ValueDate'
             , DebitCreditMark             Varchar(40) Path 'DebitCreditMark'
             , Amount                      Varchar(40) Path 'Amount'
             , TransactionType             Varchar(40) Path 'TransactionType'
             , IdentificationCode          Varchar(40) Path 'IdentificationCode'
             , ReferenceForTheAccountOwner Varchar(40) Path 'ReferenceForTheAccountOwner'
             , SupplementaryDetails        Varchar(40) Path 'SupplementaryDetails'
     ) x ;

Getting Type Mismatch Error while passing Array of Interfaces from C#(VSTO) to VBA through IDispatch interface

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

How to solve the "type mismatch" error in jCOM early binding program?

I got a "type mismatch" error jCOM early binding program.
I use the VB as the jCOM client to access the EJB deployed on WLS7. While using the
object parameter like "java.lang.Integer" in EJB method call, I got that error message
and my VB client had to be stopped?
The same situation, the VB program work perfect when using the "int" as the parameter.
And I try to instance the "myTLB.JavaLangInteger" in my VB program, but how ? The
"New", "CreateObject" and "GetObject" all failure, I don't know what to do next ???

Hi,
This problem Could happen when you referesh quality or test system.
Your delta setup for the related master and transaction data needs to be reinit.
What happens is when you init. the delta and subsequent delta is all maintained in your source system
please check Notes 852443,424848,834229
Hope this helps
Thanks
Teja
Message was edited by:
Teja badugu

RowSet Column Type Mismatch Error

Hi,
I am using SOA 11g,
JDeveloper 11.1.1.3.0
BPEL, SOA 11g, DB2 Stored procedure,
In a BPEL service I am getting this error while invoking a DB2 Stored procedure with Strong XSD.
while running I am getting this error message. This error message while invoking DB2 stored procedure, both XSD are identical. Input to service & input to DB adapter.
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'dba' failed due to: RowSet Column Type Mismatch Error. The SQL type in the XSD (CHARACTER) does not match the SQL type in the RowSet (VARCHAR) for column LONGITEM of parameter RowSet. This procedure returns a RowSet which could in theory return any arbitrary result. However you chose at design time to generate a single strongly typed XSD describing this result set in all cases, based on a test execution of the stored procedure. This makes later XML transforms easier. You may have also edited the XSD directly. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
-CD

Hi CD,
maybe if your strong XSD contains db:type="CHAR", you could try to change it to "VARCHAR" instead.
HTH,
Steve

"Error 13 writing data in step 6: type mismatch" - Error during package run

Hi experts,
I am using SAP BPC 7.0 M and facing an issue while importing a package. I am encountering the error : "Error 13 writing data in step 6: type mismatch". The package is running successfully for some files but is failing for similar other files. The data is uploading successfully on server but still it is giving an error while conversion.
Thanks,
Regards,
Kamya Nagpal

Hi All,
In continuation to the above message:
Even when the package is failing, the data is getting uploaded in the server.
Thanks,
Regards,
Kamya Nagpal
Infosys Technologies Limited

Intermittant GPIB Errors "type mismatch"

Similar Messages

Maybe you are looking for