Intermittent not connected to Oracle error

Hi ,
I keep getting not connected to oracle error for one of our client' server. The application is an Windows service and the client OS is Windows 2003 Server with Oracle Client version 9.2.0.7
I haven't see this error for any other client. I have got the following exception being reported from oracle.
Any ideas? I initially thought it was the service, but debugging it in Visual Studio has not shown any exception, MS Exception or buffer overruns.
Regards
Viresh
ORANTCP9! 619137b9()
ORAN9! 614d7625()
ORAN9! 614c6954()
ORAN9! 614a95a6()
ORAN9! 614a0256()
ORAN9! 6149f72d()
ORAN9! 6149d743()
ORANONAME9! 617d110d()
ORAN9! 614a35db()
ORAN9! 614a276c()
ORANL9! 614105c0()
ORAN9! 614f914c()
ORAN9! 614a4f80()
ORAN9! 61493c84()
ORACLIENT9! 60716c43()
ORACLIENT9! 606a9b93()
ORACLIENT9! 60652018()
ORACLIENT9! 60601457()
ORAOLEDB! 02c0c549()
040d8450()

i think you will need to check your tnsnames.ora file on your client machine. make sure the ip is same as that of one at the server.
also check the listener.ora has the correct ip (this should be same as the server machine run ipconfig/all) .
try to restart the listener on the server.
from command prompt
--lsnrctl
--status
--start

Similar Messages

Not connect to oracle error

Hi
I made a procedure to make invoice for the customer which is very
important.
but when i execute it from two places at the same time one of it
is completed and other gives me error like.
Not Connected to Oracle.
Any suggestions
Thanks

Hello Sir,
I call this procedure from Sql plus its a lengthy procedure used cursors and object types
it is like that when execute
SQL> DECLARE
2 RETURNPARAMETER NUMBER;
3 SESSION_00 VARCHAR2(200);
4 TBL_CUSTOMER_MASTER_01 VARCHAR2(200);
5 TBL_AFFILIATE_02 VARCHAR2(200);
6 TBL_SALES_SHIP_ADDRESS_04 VARCHAR2(200);
7 TBLINVOICE_05 VARCHAR2(200);
8 STOREID VARCHAR2(200);
9 SEPARATOR VARCHAR2(200);
10 TBL_INVOICE_PAY_BY_CHECK_06 VARCHAR2(200);
11
12 BEGIN
13 RETURNPARAMETER := NULL;
14 SESSION_00 := '+111330,1~#111330^1^79^~2~0~79~79~SP5569~~~~~0~~';
15 TBL_CUSTOMER_MASTER_01 := '~Pamela~Strope~~38 Garfield [email protected]~driverse~';
16 TBL_AFFILIATE_02 := NULL;
17 TBL_SALES_SHIP_ADDRESS_04 := 'Pamela~Strope~~38 Garfield Street~~Westover~US~WV~26501~304-296-9040~~';
18 TBLINVOICE_05 := '~Credit Card~Visa~4111111111111111~Pamela S Strope~5~2008~186~30-Jan-2008~~';
19 STOREID := '5030';
20 SEPARATOR := '~';
21 TBL_INVOICE_PAY_BY_CHECK_06 := '~~~~~ ';
22
23 UMESH.PROC_ADDSALESINVOICE ( RETURNPARAMETER, SESSION_00, TBL_CUSTOMER_MASTER_01, TBL_AFFILIATE_02, TBL_SALES_SHIP_ADDRESS_04, TBLINVOICE_05, STOREID, SEPARATOR, TBL_INVOICE_PAY_
24 END;
25 /
+111330,1~#111330^1^79^~2~0~79~79~SP5569~~~~~0~~
cur_Line RowBound=13
Session_ItemID=+111330,1
cur_Line RowBound=10
tbl_Customer_Master_01 cur_Line RowBound=14
Cust_Email= [email protected]
UPDATED @tbl_Customer_Master Cust_ID= CI20089
@affliate_Id =
@Order_No =OD22799
Session_ItemID RowBound=2
cur_CustItem RowBound=0
cur_CustItem =0
111330,1
111330^1^79^
cur_CustItem RowBound=3
cur_CustItem RowBound=3
cur_CustItem Cart_CustPrice=79
cur_CustItem Cart_CustPIDs=
cur_CustItem =3
StoreId : = 5030 Invoice_No := 118278
SUB_INVOICE_NO : = 5613
@Invoice_No = 118278
PL/SQL procedure successfully completed.
SQL> /
ERROR:
ORA-03114: not connected to ORACLE
DECLARE
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error%s
SQL> /
ERROR:
ORA-03114: not connected to ORACLE
I think it is because the resources used in this procedure are busy may be.
but i am not sure.
any solutions
thanks

SQLPlus COPY error: ORA-03114: not connected to ORACLE

This is what I'm trying to do:
I'm logged into an Oracle 8.1.6 database on a Windows 2000 Professional box and trying to copy data and tables from an Oracle 7.3.4 database on an HP/UX box.
I log into my 8.1.6 SQLPlus as:
scott/tiger@testdb
Then I run the following:
SQL> set copycommit 1
SQL> set arraysize 1000
SQL> copy from user/user1@devp1 -
create reps_t -
using -
select * from reps_tThis is my error:
ORA-03114: not connected to ORACLE
Can someone give me a better understand how SQLPlus COPY works and give me an idea how to locate the problems.
Thanks,
Laith E.H.
null

I think this combination user/user1@devp1
is not ok.
U can get good material about copy command
from technet itself. Just search for Copy

Launching of reports,inconsistent error comes,not connected to oracle.

Hi experts,
Upon launch of any report-- Receive error: Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 3114 message: [Oracle][ODBC][Ora]ORA-03114: not connected to ORACLE. [nQSError: 16001] ODBC error state: S1000 code: 3114 message: [Oracle][ODBC][Ora]ORA-03114: not connected to ORACLE. [nQSError: 16015] SQL statement execution failed. (HY000)
Strangely this error is not consistent,it goes when we refresh the screen.Please suggest me something.

Are you using 'Enable connection pooling' in your connection pool for Oracle ?
- from help "Allows a single database connection to remain open for the specified time for use by future query requests. Connection pooling saves the overhead of opening and closing a new connection for every query. If you do not select this option, each query sent to the database opens a new connection."
Maybe the database is dropping the connection before OBIEE closes it if your using this option.
Is your database or BI Server clustered ? (Rac or OBIEE Clustering)
Maybe one of the nodes cannot connect, and you get success from one and failure from another
Is your TNS Listener 'stable' ie its not dropping connections for anything else ?

[Error] Not connected to Oracle...

I've installed oracle8.1.7 on a Sun Enterprise 450 Solaris box.
Followed every steps listed in the installation Manual(SGA configuration, etc...)
i tried to create databaase using dbassist but failed.
The error I got is "ORA-01034 ORACLE not found" or "Not connected to Oracle".
Can anyone tell me why?
what steps to resolve the problems?
I miss any pre_installaiont steps...???
Thanks in advance.

This is a very common error.
Until you post your script - i don't think we can do any help for you. Or, at least post some relevant information.
Regards.
Satyaki De.

Error: ORA-03114: not connected to ORACLE

While executing the database creation at the middle it is asking for password even if i give password (first attempt ) or empty enter (Last attempt)i'm unable to connect the database.
Password for DBSNMP user:
null [ORA-03114: not connected to ORACLE
Thanks!

in my lsnrctl i am unable to see the database
H:\lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:10:31
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date                01-FEB-2013 19:01:09
Uptime                    0 days 0 hr. 9 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\listener.ora
Listener Log File         e:\app\username\diag\tnslsnr\mysystem\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Service "First" has 1 instance(s).
Instance "First", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyi am able to see the all the database which running under this instances
After that i pingged the database
H:\>tnsping First
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:13:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost
)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = FIRST)))
OK (30 msec)where as in tnsping Last i am able to see the database
H:\>tnsping Last
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:13:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost
)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = LAST)))
OK (30 msec)Last database is in oracleserviceLast
What is wrong with the process.

OBIEE 11g not connect the Oracle database

Hi All,
We installed 11.1.1.6.0 version on Linux 64 bit it works fine after some reason we delete that one and re install on same Linux box,we place old catalog and rpd.
But when you login all reports is showing errors bellow
In log file..........
[nQSError: 43119] Query Failed:
[2013-10-19T19:47:24.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 24cef0e6e960bda3:-7f74eefb:141d239504e:-8000-0000000000000d97] [tid: 44b5a940] [nQSError: 17014] Could not connect to Oracle database. [[
[nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified
at OCI call OCIServerAttach.
[nQSError: 43119] Query Failed:
[nQSError: 43113] Message returned from OBIS.
In report level
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
Pls help thanks in advance.

There are 2 places you need to keep TNS names.ora file for OBIEE to connect.
1. Oracle client which is in your machine
2. OBIEEhome>Oracle_BI1\network\admin
I'm sure you would have it in your oracle client. Copy paste the same TNS names in this path too.
Then open rpd and right click on any table in physical layer and click view data. You should see the results.
if this doesn't work check your credentials.
mark if this helps

SQLLDR run command line fails: ORA-03114: not connected to ORACLE

We moved our db (11.2.0.3) to a new server (VM) and cannot get sql loader direct load to run for a non-oracle db owner account without specifying a connection string (@DB). I have the environment set up correctly for this user and can connect to the database via sqlplus.
sqlldr dba1 control=test.ctl direct=yes <==FAILS
Password:
SQL*Loader: Release 11.2.0.3.0 - Production on Fri May 17 13:00:32 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
SQL*Loader-925: Error while uldlfca: OCIStmtExecute (ptc_hp)
ORA-03114: not connected to ORACLE
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
sqlldr dba1@DB control=test.ctl direct=yes <==SUCCESSFUL
Password:
SQL*Loader: Release 11.2.0.3.0 - Production on Fri May 17 12:59:11 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.

My thoughts were along the line that the environment for user x not set up correctly but I verified ORACLE_SID & ORACLE_HOME prior to posting. This user's environment references TNS_ADMIN so I'm sending you the tnsnames.ora from that location.
Please note that I can execute this logged in as the db binary owner (environment set the same as user x).
DWQ1 =
(DESCRIPTION =
(ENABLE = BROKEN)
(ADDRESS = (HOST = xxxx)(PORT = 1521)(PROTOCOL = TCP) )
(CONNECT_DATA =
(SERVICE_NAME = DWQ1)
)

D40-1015 Could not connect to Oracle OLAP

Hello,
I have installed new 10g R2 database on Sun Solaris 64 bit, When I access the discoverer I am getting this 'D40-1015 Could not connect to Oracle OLAP' error. I have installed OLAP and XDB everything.
How do I recover from this error, any idea would be greatly appreciated.
FYI,
OracleBI Discoverer
Diagnose Connection
BI Beans Catalog Version....=N/A; not installed in uv
Discoverer Catalog version....=N/A; not installed in uv
Thanks,

Hi,
Did you install the Discoverer catalog and authorize users? (see the Configuration Guide)
Regards

ORA-93114 Not connected to Oracle when using hsodbc

Hi,
I am trying to transfer data from SQLServer 2000 to Oracle 8.1.6 on Sun.
I have configured my ODBC on Sun and it works fine.
Now I am trying to get the data in Oracle.
These are my settings in hsodbc.ora,tnsnames.ora and listener.ora.
HS_FDS_CONNECT_INFO = nj050149
HS_FDS_TRACE_LEVEL = 2
HS_FDS_TRACE_FILE_NAME = $ORACLE_HOME/hssql.trc
HS_FDS_SHAREABLE_NAME = /opt/odbc/lib/ivmsss18.so
# ODBC specific environment variables
set ODBCINI=/opt/odbc/odbc.ini
===============================
tnsnames.ora
hsodbc =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(CONNECT_DATA =
(SID = hsodbc)
===============
listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = oradev.css.mot.com)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(SID_NAME = NJ05DEV)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = hsodbc)
==========
I have set up a dblink pointing to hsodbc.
But when I try to select from a table in SQLServer
I get the error message
ERROR at line 1:
ORA-02068: following severe error from HSODBC
ORA-03114: not connected to ORACLE
Can you please help. I could not identify the problem.
Thanks
Ana

Hi,
I am trying to transfer data from SQLServer 2000 to Oracle 8.1.6 on Sun.
I have configured my ODBC on Sun and it works fine.
Now I am trying to get the data in Oracle.
These are my settings in hsodbc.ora,tnsnames.ora and listener.ora.
HS_FDS_CONNECT_INFO = nj050149
HS_FDS_TRACE_LEVEL = 2
HS_FDS_TRACE_FILE_NAME = $ORACLE_HOME/hssql.trc
HS_FDS_SHAREABLE_NAME = /opt/odbc/lib/ivmsss18.so
# ODBC specific environment variables
set ODBCINI=/opt/odbc/odbc.ini
===============================
tnsnames.ora
hsodbc =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(CONNECT_DATA =
(SID = hsodbc)
===============
listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = oradev.css.mot.com)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(SID_NAME = NJ05DEV)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = hsodbc)
==========
I have set up a dblink pointing to hsodbc.
But when I try to select from a table in SQLServer
I get the error message
ERROR at line 1:
ORA-02068: following severe error from HSODBC
ORA-03114: not connected to ORACLE
Can you please help. I could not identify the problem.
Thanks
Ana ==============================================
I modified the tnsnames.ora to say
hsodbc.css.mot.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nj050149)(PORT = 1521))
(CONNECT_DATA =
(SID = hsodbc)
and now I get an error message saying
ORA-12545: Connect failed because target host or object does not exist
Please help.
Ana

Could not connect to Oracle database. (HY000): BI Answers Problem

Hi,
I am using OBIEE 11g and 11g admin client tool is installed in my machine. I created one rpd and I deploy that rpd in the server through Enterprise manager fusion middleware control. But when try to run the analysis from BI answers it throws and error like
"TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)".
In the rpd I use OCI default (10g/11g) and cheked that connection is successful and also when I click on view data option in the physical layer I am able to see the data. I cheked with DBAs and correct TNS entries are also there in the server. Could not understand where is the problem.
Please help.
Thanks
Titas

Try like this
Call Interface: Default (OCI 10g/11g)
Data source Name->localhost:1521/XE
BTW: Whats the client bit version 32/64 bit, if you have 64bit and above is not working try with Oracle client 32bit.
Pls mark correct/helpful if helps

ORA-12154: TNS:Could not connect to Oracle database.

Hi All,
I'm getting the following error while trying to access OBIEE dashboard.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
I have oracle 10g R2, I can connect my database using SQLPLUS. I am not able to do Update Row Count from Admin tool also. If anyone come across this issue, please share your experience. Anyhelp would be appreciated.
Thanks,
Ravi

The problem is OBIEE server not able to read the tnsnames.ora file. That depends upon the what you set as ORACLE_HOME. that can be find with tnsping command at command line. Follow this article about setting up oracle home and oci drivers
http://oraclebizint.wordpress.com/2007/10/03/oracle-bi-ee-101332-identifying-oracle-homes-for-oci-drivers/
please make sure that your DB-home is the first entry in your PATH environment variable.
Have you created TNS_ADMIN environment variable. Create a environment variable TNS_ADMIN which maps to location where tnsnames.ora file located.
let me know if you are not able to load after this steps.
- Madan

Apple os x 10.7 server "not connected to internet" error when trying to download "essentials" through working wifi internet connection?

Lion and Server downloaded fine, but Server wants additional "essential files" .
I try to load these but I get "not connected to internet" error message despite working wifi internet connection?
How to proceed (connection is good, firewall off,??)

answer at https://discussions.apple.com/thread/3189925?tstart=90

Could not connect to oracle OLAP

Hi
when i connect to Disco. Plus for "OracleBI Discoverer for OLAP" and Database as "localhost:1521:orcl" i got this message:
"D40-Could not connect to oracle OLAP"
so i run a Quick Diagnosis and i got this report:
JDK version = 1.4.2_04
BI Beans internal version = 3.2.1.0.13
Discoverer Plus OLAP version = 10.1.2..07.59
Discoverer Version = 10.1.2.45.46c
Connect to database = successful
JDBC driver version = 10.1.0.3.0
JDBC JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Database version = 10.1.0.4.0
OLAP API Server version = 10.1.0.4.0
OLAP AW Engine version = 10.1.0.4.0
OLAP Catalog version = 10.1.0.4.0
BI Beans Catalog version = N/A; not installed in younis
Discoverer Catalog version = N/A; not installed in younis
Authorized for Discoverer Plus OLAP = No!
OLAP API JAR file version = 9.2
OLAP API JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Load OLAP API metadata = Successful
Number of metadata folder = 1
Number of metadata measures = 3
Number of metadata dimensions = 4
Thanks
Younis

I think you forgot grant OLAP_USER, D4OPUB role to younis
Make sure D4OSYS user is created. D4OSYS is the owner when the Discoverer OLAP catalog is created.
Make sure the OLAPSYS user and OLAP_USER/OLAP_DBA role is created in order to grant D4OPUB. You might need to run $ORACLE_HOME\olap\admin\olap.sql to create those accounts eventhough you have OLAP option installed.
I found directly install latest Oracle database patchset (10.1.0.4) and then create database doesn't have those accounts automatically, unless you are upgrade from 10.1.0.3.
Hope this can help

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).

Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

Intermittent not connected to Oracle error

Similar Messages

Maybe you are looking for