Interrupt at Level 6 not serviced

Hi All,
We have out in house developed pci card in a v240. When we start running the card through the driver I am getting the following prints in the messages file. we can see from the driver debug that the messages on the queue have already been processed and are waiting for the CPU but then we receive the interrupt to tell us that there is something to process. As we have a high throughput going through the pci bus we get approx 85 messages per second.
Jan 28 09:40:58 telesoft unix: [ID 257829 kern.warning] WARNING: interrupt 0x822 at level 6 not serviced
Jan 28 09:46:07 telesoft last message repeated 1314 times
My question is this is not really an issue as far as I can see but is there anything I can set to turn off these messages going the the /var/adm/messages file?
Regards,
Jon

<PRE>
[re-posted for readability]
I repeatedly get this error message from the kernel after an
interrupt to the device for which I am writing a driver. We are
targetting version 2.6 of Solaris.
I have no idea where (i.e. what module) this message comes from, but
it is not my driver. However, it does appear to get generated for
every interrupt that is handled by the interrupt routine of my
driver. Note that the interrupt routine does return DDI_INTR_CLAIMED.
</PRE>

Similar Messages

WARNING: interrupt level 6 not serviced

Hello,
I'm getting the following error in one of the box I support.
ov 30 18:18:27 clientgis3b unix: [ID 882636 kern.warning] WARNING: interrupt level 6 not serviced
Dec 1 00:57:56 clientgis3b unix: [ID 882636 kern.warning] WARNING: interrupt level 6 not serviced
I've getting these messages for a while now and I haven't been able to determine if they are or not related to the network card driver.
The problem is the qfe card stoped working after that and I haven't been able to make it work. I'm thinking of replacing the card.
Can anyone help figure this out.
Thanks in advance.
Regards
Randall Z.

fuser /dev/console
shows you which process is using /dev/console file. check that process id.
also check man of fuser

Hi I am trying to edit my payment information to update a new credit card to ensure my service is not interrupted but it is not allowing me to do so - please help

Hi I am trying to edit my payment information to update a new credit card to ensure my service is not interrupted but it is not allowing me to do so - please help. I have logged in, but there is not way to edit my information or add a new card online

Hi johpulp,
Kindly refer this link of FAQ:Manage your membership and payments | Creative Cloud
You can update It manually by following the steps given in this FAQ or you can reach to our chat support: http://adobe.ly/19llvMN
Regards,
Florence

Windows could not start block level backup engine service

Hello,
              Im
trying to perform system state backup for one of the server its unable to run. Last week we have performed the system state backup without any issue.
Operating System:2008
OS Version: R2 Small Business Server 2011 x64 Edition Build 7600
RAM-32 GB
Following event ID is reported in the logs;
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          7/2/2013 2:25:35 PM
Event ID:      754
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:     ABC
The Block Level Backup Engine service has stopped.
When we try to restart the Block Level Backup Engine service we get error as “Windows could not start the Block Level Backup Engine Service on Local Computer.
Error 0x800700b7: Cannot create a file when that file already exists.”
I have already restarted Virtual disk and Volume shadow copy service, but no luck.
Any help in resolving this issue will be much appreciated.
Thank you.
Keshava

All,
Here is the solution which worked for me ;
Services.msc >properties page of Block Level Backup Service Engine
Changed to Log On tab
Instead of Log On as Local System Account changed to Log On as
[email protected] (select the account with admin creds), entered the password of admin and closed the properties page.
Now restart the Block Level Backup Service Engine and re-run the job, backup completes without any issue.
Thank you
Keshava

Making vendor down payment at PO header level and not item level

Hi
I am making downpayment to vendor. I am using new functionality in EHP 4 for making downpayment through purchase order. When I run ME2DP for making downpayment, it asks for PO item number also.
But my requirement is to pay downpayment at PO header level and not PO item level.
Please let me know how can I do payment at PO header level.

Dear All,
I am also facing the same problem. Though Advance is maintained in PO Header Level when we are trying to create DP Request / DP system is asking line item mandatory. Suppose i have 2 line items and maintain all the DP amount in first line item. I am making service entry for 2nd line item and bill for the second line item. Then in this case, the Down Payment clearing tab doesn't appear in MIRO. That means I am unable to adjust the advance for the line item though I have to adjust it.
Problem is that there are more than 300 lines items in PO/WO. Hence it becomes difficult to maintain advance for each line or the user is forced to maintain certain amount in line item..
Please help ..Its urgent
Regards,
Ganesh

Hide Dimension Hierarchy if levels do not contain any data

I have a hierarchy in a dimension that does not contain data for specific roles. For example dimension Dim1 has a hierarchy H1 with levels aaa and bbb. When each level in H1 does not have data, and the data is unknown, I do not want the user
to be able to select H1 in the browser.
Does anyone know how I can hide the hierarchy based on what data is in the hierarchy?
Thanks,
Steve

Hi Steve,
In SQL Server Analysis Services, we can hide or disable hierarchy level by using
AttributeHierarchyEnabled property, however, when this property is set to false, this level will not appear no matter if contain data or not. In your scenario, you want to hide the hierarchy level dynamically, right? As Aleksandr
said, I am afraid there is no such a method to achieve it.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Service Level Agreements on Service Requests

Hello,
I was wondering if anyone had thoughts or experiences to share for the best way to manage Service Level Agreements for Service Requests. I have been requested to provide a report showing whether Service reqeusts (by Area/Topic) were answered within the agreed times.
Eg Requests for New Business Cards are expected to be resolved in 3 days and it took 4 days so flag this request as having not met arranged timeframes.
I'm not sure where is the best place to store the Service Level dayes by area? Is that just within the logic of the report? Appreciate any thoughts on this.
thanks,

Hi Venky,
I'm new to On Demand and not that confident creating a custom object. I was wondering if I could achieve my SLA's by using a Workflow and custom SR field?
I thought if I created a new field on the SR called 'Service Level Agreement' I could populate this field with SLA days based on Service Area.
Eg:
Trigger Event: Before modified record saved
Workflow Rule Condition: PRE('<Area>') <Area>
Action: Update Values
Field Name: Service Level Agreement
value: IIf([<Area>]="Allocations",'2')
However I get an error message as I'm not sure if I have the expression correction.
Function ‘IIf’ is invalid with 2 parameters(SBL-SBL-00000)
Does this make sense as an approach? I thought I could then use this field on reports.
thanks,

G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.

Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil

Delivery address at Item Level and not at the Header Level

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

It is standard process only.
In Po delivery address is maintained at item level because to which address perticular material to be delivered,
this may change from material to material or may not change

Price chnage at sales order level but not in billing

Hi
I want to maintain the price manually in sales order but donot want to allow user to change the price in billing. I understand it is controlled at condition type level but not at document level.
Need your advise as to how we an achieve it.
Regards,
Neeraj Srivastava

Hi Neeraj,
You can achieve this by following below setting:
Go to into the condition for which you want to maintain price manually.
put C in manual entry field.
Set check mark for Header cond., Item cond & Delete only. Remove check mark for Amount/percent & value. Save it.
Go to pricing procedure and mark this condition for manual entry and mandatory.
Only thing in this is you need to put this condition in sales order manually & maintain price for this condition before pressing "Enter". Once you press "Enter" it will go in gray mode.
Ramchandra

Item level security not working when placed in a portlet page

I have three page links linking to separate pages and have two of them with item level security turned on for specific groups with view privilges. I have the access for those groups with view privilges in the page level as well. I have published that as portlet and placed the portlet in another page which has view priviliges for the groups specified in item level as well.
But I notice that when i place the portlet in a page, the item level security is not working.
Item Level Security Not Working for Items Placed on a page and published as portlet and placed in another page. Is there some work around for this.
Thanks
Valli

Would you please clarify for me? Is the problem that unauthorized people can see the portlet, or that unauthorized people can see the links?

Validation at View Object level and not Enity Object

How would you create validation logic at the view object level and not at the entity object level? I have many VOs that reference the same EO and want some validation logic to be applied only to certain VOs.
Thanks,
Quoc

My use case for this is to perform form validation inputted by the user via a JSPX page.

HT204088 My CSR Racing (level) did not update from my macbook to my new iPad mini?

My CSR Racing "level" did not come over to my new ipad mini?

from my Macbook Air

Incoterms on Item level is not updated on STO.

Issue: they have created a STO with wrog incoterm, now the issue is that the Incoterms on PO--> Item level is not updated if Incoterms on Header level is changed. I suggested them to change incoterm on item level manually, but user is saying the problem is that SAP doesn't change automatically Incoterms on item level if Incoterms on Header level are changed??
What user is saying..Is this correct? or any thoughts/solution to fix this issue?
Can anyone suggest me on this?
Thanks & Regards
Suresh Babu

HI,
Try this link
How Incoterms gets defaulted for STO
Regards
KK

Tree View Second level is not displaying bind parameter

Studio Edition Version 11.1.2.2.0appears this problem is addressed in
http://dailydevfixes.blogspot.com/2011/07/setting-bind-parameters-on-hierarchy-of.html
unfortunately I must be missing something.
as a test using the hr schema
I was doing a tree view with hire date as the first level then the employee id, last name and first name as the second level.
I hard coded employee id of 187 on a bean called by a button.
the first level is updated unfortunately the second level is not (employee id 107 should not show up)
--1999-02-07
----- 187 Cabrio Anthony
----- 107 Lorentz Dianahere is my bean the first level is updated but the second level is not not quite sure what I am missing
    public void ButtonClick(ActionEvent actionEvent) {
        BindingContext bindingctx = BindingContext.getCurrent();
        BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
        DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
        DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("ParentVO1Iterator");
        ViewObject Parentvo =dciter.getViewObject();
        Parentvo.setNamedWhereClauseParam("empid",187);
        Parentvo.executeQuery();
        AttributeDef attrDef = Parentvo.findAttributeDef("ChildVO");
        ViewObject childvo = attrDef.getAccessorVO(Parentvo);
        childvo.setNamedWhereClauseParam("empid",187);
        childvo.executeQuery();
        AdfFacesContext adfFCtx = AdfFacesContext.getCurrentInstance();
       adfFCtx.addPartialTarget(treeupdate);
    }here is the query for the parent view object.
select trunc(hire_date) hire_dt
from employees
where :empid is null or employee_id = :empid
group by trunc(hire_date)here is the query for the child view object
select trunc(hire_date) hire_dt, employee_id, employee_id||' '||last_name||' '||first_name nm
from employees
where :empid is null or employee_id = :empid
order by trunc(hire_date)here is the view link
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewLink SYSTEM "jbo_03_01.dtd">

<ViewLink
xmlns="http://xmlns.oracle.com/bc4j"
Name="ParentToChildViewLink"
Version="11.1.2.61.83">
<Properties>
    <SchemaBasedProperties>
      <LABEL
        ResId="model.view.link.ParentToChildViewLink_LABEL"/>
    </SchemaBasedProperties>
</Properties>
<ViewLinkDefEnd
    Name="ParentVO"
    Cardinality="1"
    Source="true"
    Owner="model.view.ParentVO">
    <DesignTime>
      <Attr Name="_accessor" Value="true"/>
      <Attr Name="_finderName" Value="ParentVO"/>
      <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.view.ParentVO.HireDt"/>
    </AttrArray>
</ViewLinkDefEnd>
<ViewLinkDefEnd
    Name="ChildVO"
    Cardinality="-1"
    Owner="model.view.ChildVO">
    <DesignTime>
      <Attr Name="_finderName" Value="ChildVO"/>
      <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.view.ChildVO.HireDt"/>
    </AttrArray>
</ViewLinkDefEnd>
<ResourceBundle>
    <PropertiesBundle
      PropertiesFile="model.ModelBundle"/>
</ResourceBundle>
</ViewLink>and here is the tree
    <af:tree value="#{bindings.ParentVO1.treeModel}" var="node"
                             selectionListener="#{bindings.ParentVO1.treeModel.makeCurrent}" rowSelection="single"
                             id="t1" binding="#{myBean.treeupdate}">
                        <f:facet name="nodeStamp">
                            <af:outputText value="#{node}" id="ot1"/>
                        </f:facet>
                    </af:tree>

thanks I am working through that example unfortunately I ran into a problem
previously (in my real application) I was using bind parameters and my query had the following where clause.
( I did this to turn a comma separated list into an in statement)
WHERE    :Bind_Batch_NM_Comma_Sep_List IS NULL
         OR batch_nm IN
               (    SELECT REGEXP_SUBSTR (:Bind_Batch_NM_Comma_Sep_List,
                                          '[^,]+',
                                          1,
                                          LEVEL)
                              batch_nm
                      FROM DUAL
                CONNECT BY LEVEL <=
                                REGEXP_COUNT (:Bind_Batch_NM_Comma_Sep_List,
                              + 1)however in the example presented you are to create view criteria and there is a panel on the right called view object where clause but I can not figure out how to type into it directly
and I find it unlikely I can recreate this where clause using the add item button.
is there a way to manually type the where clause in the view object where clause box?

Interrupt at Level 6 not serviced

Similar Messages

Maybe you are looking for