INTERSECT funcation in MDX not working with if we INTERSECT Parent SET and lower leval Set
Hi All,
INTERSECT funcation is not working if i filter Parent attribute and simple attribute
ex.
SET a as
INTERSECT(
[DimCustomerBuyer].[ParentProvince].[ParentProvince],[DimCustomerBuyer].[Province].[Province])
Query (99, 1) Members, tuples or sets must use the same hierarchies in the INTERSECT function.
is there any work around
parent Provence we use for Parent child attribute but Province is normal attribute
Regards,
Manish
Hi manishcal16PPS,
According to your description, you want to use the INTERSECT() function for different hierarchy members. Right?
In MDX, when using INTERSECT() function, the two sets must have same dimensionality. Which means the two set of members must be under same hierarchy, otherwise they will be not comparable to SSAS so that it can't return the intersect part
of members. This is the limitation of INTERSECT() function.
Reference:
Intersect (MDX)
Intersect(MDX)
Regards,
Simon Hou
TechNet Community Support
Similar Messages
-
Graphite base station not working with my Intel Based Mac Mini and iPhone.
My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: SorianoI suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps. -
My i6 is not connecting to handsfree in vehicle - have reset a few times-still not working as handsfree. Can dial but then goes to device. Also continues to disconnect.
Verizon carrier
Acura MDX 2014
i6
ios 8
Please help ASAP!You have to go to autherized iPhone agent.
-
My iPhone 4 started to blackout out of nowhere and it wont work only until I plugged my phone into the charger. It has been going on for several times in a day, where it just randomly blacks out. Do anyone know what is the problem and how do I exactly fix this? thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPhone 5c not working with internet apps such as tumblr and instagram?
We had a tiny router issue for a couple minutes but got it working quickly. Then my iPhone simply stopped working with internet apps as i said in the title. It says it has 3 bars of wifi, i tried data, restarted it, tried everthing but it wont work. Please help
Nevermind I got it fixed.
-
IBOT not working with BI 11.1.1.7 and e-BS R12
Hi,
We are using e-BS to click on the BI Responsibility as a single sign on and connect directly to BI. Using this method, you can use iBOT to send emails to users with a weblogic account but It's impossible to use iBOT to display alerts on user dashboards.
Do you know if there is an existing solution? When we run an ibot to display an alert on the homepage and dashboard, we have the error message: NO DEVICE FOR USER: XXXXXXX
Thank you.IE11 is a "Rolling Train Wreck". Combined with 8.1 it is, without a doubt, the worst pile of garbage to EVER come out of Redmond, WA.
MS deliberately altered the "User-Agent Strings" to make it nearly IMPOSSIBLE for pages and sites to ID it. (See: IE11's Screwed up User-Agent Strings)
The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. -
Lync 2013 PSTN calling not working with Sonus SBC 1000 over TLS and SRTP
Dear All,
We have recently installed Lync 2013 Enterprise Edition with a Pool of 3 FE Servers (MEDIATION COLLOCATED).
We need to implement TLS and SRTP with Sonus SBC 1000. However calls are not routing b/w SBC and Lync.
We are using wild card certificate with multiple SIP Domains as SAN(s), for internal FE servers as well SBC.
Also i would like to mentioned here that inbound and outbound calls are routing properly when we tested it over TCP.
When I move to TLS Only calls from Lync to SBC (outgoing) are working without encryption.
Here are the OCS Logger traces for incoming calls which are not landing on lync:
TL_INFO(TF_PROTOCOL) [1]2C5C.0D30::04/30/2014-14:35:18.020.00026518.020.00026518.020.00026518.020.00026518.020.00026518.020.00026518.020.00026518.020.000265d2
(S4,SipMessage.DataLoggingHelper:sipmessage.cs(774))[3491463749]
>>>>>>>>>>>>Outgoing SipMessage c=[<SipTlsConnection_AE0419>], 10.10.0.11:5067->10.10.7.50:25678
SIP/2.0 400 Bad Request
FROM: "3158222726"<sip:[email protected]>;tag=ac3201ce-4d7
TO: <sip:[email protected]:5067>;epid=D2091CF753;tag=f373543c
CSEQ: 2 INVITE
CALL-ID: [email protected]
VIA: SIP/2.0/TLS 10.10.7.50:5067;branch=z9hG4bK-UX-ac32-01ce-0b14
CONTENT-LENGTH: 0
SERVER: RTCC/5.0.0.0 MediationServer
------------EndOfOutgoing SipMessage
TL_INFO(TF_PROTOCOL) [1]2C5C.0D30::04/30/2014-14:35:18.027.00026518.027.00026518.027.00026518.027.00026518.027.00026518.027.00026518.027.00026518.027.000265d7
(S4,SipMessage.DataLoggingHelper:sipmessage.cs(774))[2666394843]
>>>>>>>>>>>>Outgoing SipMessage c=[<SipTlsConnection_370F030>], 10.10.0.11:58059->10.10.0.13:5061
SERVICE sip:2138797082;[email protected];user=phone SIP/2.0
FROM: <sip:2138797082;[email protected];user=phone>;epid=DCFDB95F4C;tag=17d286a93
TO: <sip:2138797082;[email protected];user=phone>
CSEQ: 3 SERVICE
CALL-ID: de750f98bdd94e908be5f2f975228ff7
MAX-FORWARDS: 70
VIA: SIP/2.0/TLS 10.10.0.11:58059;branch=z9hG4bKd47f1d3c
CONTACT: <sip:[email protected];gruu;opaque=srvr:MediationServer:CiGdW3iH5FiI3Qvr3PIKGQAA>
CONTENT-LENGTH: 630
SUPPORTED: gruu-10
USER-AGENT: RTCC/5.0.0.0 MediationServer
CONTENT-TYPE: application/msrtc-reporterror+xml
<?xml version="1.0" encoding="us-ascii"?>
<reportError xmlns="http://schemas.microsoft.com/2006/09/sip/error-reporting">
<error callId="[email protected]" fromUri="sip:3158222726;[email protected];user=phone" toUri="sip:2138797082;[email protected];user=phone" fromTag="ac3201ce-4d7"
toTag="" requestType="INVITE" contentType="application/sdp;call-type=audio" responseCode="400"><diagHeader>10013;reason="Gateway peer in inbound call is not found in topology document or does not depend
on this Mediation Server"</diagHeader><progressReports /></error></reportError>------------EndOfOutgoing SipMessage
Call
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype@Paul, Thanks for you response.
All ports / IP Add / DNS are defined properly. Telenet on listening port is working.
We are using Public Certificate for 3 Domains (wild card) and same is loaded and verified in SBC
I've not reviewed the OCS logs properly posted above.
What i've found or seems to me is that in a TLS Calls:
After receiving SIP Invite from SBC, mediation server started TLS Negotiation Process b/w Lync 2013 Server Pool and it fails.
SIP Domains:
contoso.com (default)
fabrikam.com
Lync FE Pool (lync.contoso.com
Here are the some more logs.
TL_INFO(TF_PROTOCOL) [0]2DF8.2930::05/01/2014-11:50:31.612.00025e49 (S4,SipMessage.DataLoggingHelper:sipmessage.cs(774))[2716989131]
<<<<<<<<<<<<Incoming SipMessage c=[<SipTlsConnection_103DFE0>], 10.10.0.11:5067<-10.10.7.50:24591
INVITE sip:[email protected]:5067 SIP/2.0
FROM: "3158222726" <sip:[email protected]>;tag=ac3201ce-ae
TO: <sip:[email protected]:5067>
CSEQ: 2 INVITE
CALL-ID: [email protected]
MAX-FORWARDS: 70
VIA: SIP/2.0/TLS 10.10.7.50:5067;branch=z9hG4bK-UX-ac32-01ce-010c
CONTACT: <sip:[email protected]:5067;transport=TLS>
CONTENT-LENGTH: 406
SUPPORTED: replaces,update,100rel
USER-AGENT: SONUS SBC1000 3.1.2v293 Sonus SBC
CONTENT-TYPE: application/sdp
ALLOW: INVITE, ACK, CANCEL, BYE, NOTIFY, OPTIONS, REFER, REGISTER, UPDATE, PRACK
P-ASSERTED-IDENTITY: "3158222726" <sip:[email protected]>
v=0
o=SBC 9 1001 IN IP4 10.10.7.50
s=VoipCall
c=IN IP4 10.10.7.50
t=0 0
m=audio 16418 RTP/AVP 8 0 101 13
c=IN IP4 10.10.7.50
a=rtpmap:8 PCMA/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:13 CN/8000
a=ptime:20
a=tcap:1 RTP/SAVP
a=pcfg:1 t=1
a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:pqL6Tke8pVmXPuplJ1G3+Sr9jM97H8R7iBagWzzh|2^31|1:1
a=sendrecv
------------EndOfIncoming SipMessage
TL_INFO(TF_PROTOCOL) [1]2DF8.0E04::05/01/2014-11:50:31.665.00025e8e (S4,SipMessage.DataLoggingHelper:sipmessage.cs(774))[2716989131]
>>>>>>>>>>>>Outgoing SipMessage c=[<SipTlsConnection_103DFE0>], 10.10.0.11:5067->10.10.7.50:24591
SIP/2.0 100 Trying
FROM: "3158222726"<sip:[email protected]>;tag=ac3201ce-ae
TO: <sip:[email protected]:5067>
CSEQ: 2 INVITE
CALL-ID: [email protected]
VIA: SIP/2.0/TLS 10.10.7.50:5067;branch=z9hG4bK-UX-ac32-01ce-010c
CONTENT-LENGTH: 0
------------EndOfOutgoing SipMessage
TL_INFO(TF_CONNECTION) [1]184C.0EFC::05/01/2014-11:50:32.652.00025f32 (SIPStack,SIPAdminLog::WriteConnectionEvent:SIPAdminLog.cpp(454))[946832530] $$begin_record
Severity: information
Text: TLS negotiation started
Local-IP: 10.10.0.11:5061
Peer-IP: 10.10.0.11:52529
Connection-ID: 0x10BE00
Transport: TLS
$$end_record
TL_INFO(TF_PROTOCOL) [1]184C.0EFC::05/01/2014-11:50:32.669.00026236 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[1853494582] $$begin_record
Trace-Correlation-Id: 1853494582
Instance-Id: 425D
Direction: incoming
Peer: 10.10.0.11:52529
Message-Type: request
Start-Line: NEGOTIATE sip:127.0.0.1:5061 SIP/2.0
FROM: <sip:contoso.com>;ms-fe=LYNCFE1.fabrikam.com
TO: <sip:contoso.com>
CALL-ID: aa53739ef9b34b93ba9c97d3ee56cb99
CSEQ: 1 NEGOTIATE
VIA: SIP/2.0/TLS 10.10.0.11:52529
MAX-FORWARDS: 0
CONTENT-LENGTH: 0
SUPPORTED: NewNegotiate
SUPPORTED: ECC
REQUIRE: ms-feature-info
SERVER: RTC/5.0
$$end_record
TL_INFO(TF_CONNECTION) [1]184C.0EFC::05/01/2014-11:50:32.669.0002636e (SIPStack,SIPAdminLog::WriteConnectionEvent:SIPAdminLog.cpp(383))[946832530] $$begin_record
Severity: information
Text: Connection established
Peer-IP: 10.10.0.11:52529
Peer: lync.contoso.com:52529;ms-fe=LYNCFE1.fabrikam.com
Peer-Cert: contoso.com(LYNCFE1.fabrikam.com)
Transport: M-TLS
Data: alertable="yes"
$$end_record
TL_WARN(TF_CONNECTION) [1]184C.0EFC::05/01/2014-11:50:32.669.00026387 (SIPStack,SIPAdminLog::WriteConnectionEvent:SIPAdminLog.cpp(386))[946832530] $$begin_record
Severity: warning
Text: The pool FQDN provided by the peer in its NEGOTIATE feature information does not match the pool configured in CMS for the server FQDN that it provided
Peer-IP: 10.10.0.11:52529
Peer: lync.contoso.com:52529;ms-fe=LYNCFE1.fabrikam.com
Peer-Cert: contoso.com(LYNCFE1.fabrikam.com)
Transport: M-TLS
Data: fqdn="LYNCFE1.fabrikam.com";pool="contoso.com";expected-fqdn="lync.contoso.com";info="Possible server configuration issue"
$$end_record
TL_INFO(TF_DIAG) [1]184C.0EFC::05/01/2014-11:50:32.670.000265be (SIPStack,SIPAdminLog::WriteDiagnosticEvent:SIPAdminLog.cpp(802))[1853494582] $$begin_record
Severity: information
Text: Routed a locally generated response
SIP-Start-Line: SIP/2.0 200 OK
SIP-Call-ID: aa53739ef9b34b93ba9c97d3ee56cb99
SIP-CSeq: 1 NEGOTIATE
Peer: lync.contoso.com:52529;ms-fe=LYNCFE1.fabrikam.com
$$end_record
TL_INFO(TF_PROTOCOL) [1]184C.0EFC::05/01/2014-11:50:32.670.00026615 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[1853494582] $$begin_record
Trace-Correlation-Id: 1853494582
Instance-Id: 425E
Direction: outgoing;source="local"
Peer: lync.contoso.com:52529;ms-fe=LYNCFE1.fabrikam.com
Message-Type: response
Start-Line: SIP/2.0 200 OK
FROM: <sip:contoso.com>;ms-fe=LYNCFE1.fabrikam.com
To: <sip:contoso.com>;tag=C3A751556F332F7265E9BA2517C878D4
CALL-ID: aa53739ef9b34b93ba9c97d3ee56cb99
CSEQ: 1 NEGOTIATE
Via: SIP/2.0/TLS 10.10.0.11:52529;ms-received-port=52529;ms-received-cid=10BE00
Content-Length: 0
Require: ms-feature-info
Supported: NewNegotiate,OCSNative,ECC,IPv6,TlsRecordSplit
Server: RTC/5.0
$$end_record
TL_INFO(TF_PROTOCOL) [1]2DF8.1078::05/01/2014-11:50:32.671.000266da (S4,SipMessage.DataLoggingHelper:sipmessage.cs(774))[720988281]
>>>>>>>>>>>>Outgoing SipMessage c=[<SipTlsConnection_F8A09B>], 10.10.0.11:52529->10.10.0.11:5061
SERVICE sip:2138797082;[email protected];user=phone SIP/2.0
FROM: <sip:2138797082;[email protected];user=phone>;epid=16FEE4A02E;tag=22fd877f3a
TO: <sip:2138797082;[email protected];user=phone>
CSEQ: 3 SERVICE
CALL-ID: ac0f7bc4cdc94c1dbd0bb51c7c02c890
MAX-FORWARDS: 70
VIA: SIP/2.0/TLS 10.10.0.11:52529;branch=z9hG4bK67a4c9d1
CONTACT: <sip:[email protected];gruu;opaque=srvr:MediationServer:CiGdW3iH5FiI3Qvr3PIKGQAA>
CONTENT-LENGTH: 628
SUPPORTED: gruu-10
USER-AGENT: RTCC/5.0.0.0 MediationServer
CONTENT-TYPE: application/msrtc-reporterror+xml
- <reportError xmlns="http://schemas.microsoft.com/2006/09/sip/error-reporting">
- <error callId="[email protected]"
fromUri="sip:3158222726;[email protected];user=phone"
toUri="sip:2138797082;[email protected];user=phone"
fromTag="ac3201ce-ae"
toTag=""
requestType="INVITE"
contentType="application/sdp;call-type=audio"
responseCode="400">
<diagHeader>10013;reason="Gateway peer in inbound call is not found in topology document or does not depend on this Mediation Server"</diagHeader>
<progressReports/>
- </error>
------------EndOfOutgoing SipMessage -
NW Portal not working with TLS1.0 enabled in IE and works with 1.1 and 1.2
Hi Experts,
We currently have Portal running on SAP NETWEAVER 7.0. When we have TLS 1.0 enabled IE doesn't load the secure webpage. If we have TLS1.0 disabled and TLS 1.1 and 1.2 enabled the page comes up.
The business wants to be able to open the webpage with TLS 1.0 enabled as other websites need that.
Any ideas?
Thanks,
AsadHi Samuli,
We are looking to upgrade but the business has a doubt about the following:
(1) What is the implication of applying the service packs? Is there a way to determine whether the functionality changed in the service packs are in use in the portal environment servicing PSE or the PCI Payment portals?
(2) The service pack option is not without risk considering the NetWeaver portal server for PSE shares the same dev/qa path as the PCI Payment portal application.
(3) Wouldn’t we want to apply the updates to all of the NetWeaver servers, including the production PCI Payment portals?
Thanks for your help!
Regards,
Asad -
When I use the above media query in my stylesheet Live View ceases to update the viewport. I have to update it manually each time I add or change a style. This is not the case when I use styles under a common tablet sized query @media only screen and (max-width: 768px), or when there is no query at all. Is this a bug or is there something I am missing here?
Code errors might account for the discrepancy. Validate your code and fix any reported errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O. -
I read the thing for the troubleshooting messages and I don't understand it. I just want to send and receive messages on my iPod touch 5th generation
iOS: Troubleshooting Messages
-
APPLE TV DOES NOT WORK WITH NETFLIX
APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appearsIt started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!! -
Not working with Internet Explorer?
Not sure y, but all of a sudden, a few days back, my website is not working with IE. I use Firefox and it works fine. Others I know can't view it and they click on something and it takes them to some Mac error page. Any thoughts on this? I had my wife even update her IE to 8 and restart her windows machine. nada! cheers!
I am having the same issue.
I have website for my 7th Grade class. Over the weekend, I updated to iWeb'09. Today, when my students (using IE7 tried to access the site, I noticed loading pages takes much longer and the tech guy tells me that IE doesn't work with Mobile.Me.
http://web.me.com/socialstudies8/SullivanClasswebsite/MrSullivansWebSite.html
Are there really issues with IE and Mobile.Me servers? -
IMessage not working with some contacts
I have ipad2, iMessage not working with contacts except between my son and my iPad. Get a red exclamation mark and send button is greyed out. Have rebooted, reactivated apple id and email address. Running latest software. Can anyone help please.
Imessage only works to other folks who have a device on ios5, and who have activated i message. In their set up, theyndeclared one or more specific 'receive at' addresses. Are the folks you are trying to reach on apple devices with i mesage? The red exclamation means, i think, that the apple server did not find that address as registered.
-
VMware Fusion 2 does not work with lion
I need the VMware Fusion to run my dictonary on the Mac. I have up to now Fusion2 and this does not work with the lion.
jbjoret wrote:
VMWare and Parallels hook themselves deep with the OS and are not standard applications.
Parallels broke in the 10.6.8 update, caused a lot of headaches around here.
I don't think they follow Apple's rules too well.
Fusion might be a bit less feature rich, but it seems they are more complaint. Also Apple sells Fusion and likely uses it themselves.
Both are excellent of course. -
Video & Voice Chat Not Working With ichat
Voice Chat and Video Chat is not working with ichat 6 in booth google and yahoo. One side is ichat and the other side is yahoo & google talk clients, Please confirm whether its a workable scenario or it only supports ichat to ichat.
Thanks & Regards
Sreejith RHi
Other alternatives based on the amount of info in your post.
Has she set up her Google Name in iChat or is she logged on via the Web Site (Google Mail page) ?
iChat cannot Video to the Google Mail Login page chat option or to the app called GoogleTalk on a PC.
Another thing.
If you login to the GoogleMail Web pages you will get logged out of iChat (GoogleTalk account) to a partial extent which may explain the loss of Video or Audio iCons.
iChat reports in a Text chat window that you have Logged Off.
However you seem to be able to continue the chat - but it separate from the web Page chat - You send from the web page and that chat will get the next response, send from iChat and it gets the next response (I can't remember if the Buddy told me he got two Chat windows at his end)
9:26 PM Wednesday; May 12, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Maybe you are looking for
-
Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine,
-
I have a cd of New Yorker magazine cartoons which I got in 2004. It requires adobe 6.0.1 but my computer will not allow me to install that version as it is outdated. I have windows 7. How to I get this CD to open? -Bob
-
Cant charge new i touch with old wall charger
I bought an i-touch recently because I was going on vacation. In the purchasing store they were ,out, of chargers (wall charger) Went to another store and learned they were on recall, not in prior to my departure. Was assured by employees at both sto
-
Crystal Report for Enterprise not displaying Long Text from BEx
Hello, I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0. The Characteristic (which is hierarc
-
I've created a CM repository in FSDB mode as share and root and version folder inside it and share folder is shared drive. when I restarted my portal server I'm getting this error saying startup failed Startup Error: could not create directory: <ho