Invalid Index in Web Report
Post Author: mhamill
CA Forum: .NET
I have a report which is being published and viewed on the web via a CrystalReportViewer app to display the reports (.rpt files)All other reports are running fine.
When I run this new report in Crystal on my desktop- It works fine. When I publish to the web I get this error:
System.Runtime.InteropServices.COMException: Invalid index
[COMException (0x8002000b): Invalid index.] CrystalDecisions.ReportAppServer.DataDefModel.FieldsClass.get_Item(Int32 Index) +0 CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(Int32 index) +30 CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(String fieldName) +46 CrystalDecisions.CrystalReports.Engine.ReportDocument.SetParameterValue(String name, Object val) +144 webViewer.webViewer.Page_Load(Object sender, EventArgs e) in C:\Inetpub\wwwroot\reportTool\webViewer\webViewer.aspx.vb:68 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +750
I have REMOVED the parameter field from the report and still get this error. When I view the SQL there is no WHERE clause in the statement.
Any Ideas? It is an elaborate report and I dont want to start over.
Post Author: alembic
CA Forum: .NET
Hi, were you able to resolve this problem? I'm getting the same exception when I deploy my report. It works fine on my development machine. The only difference in my case is that SetParameterValue bombs when I try to set a value for a subreport parameter.
Similar Messages
-
Invalid Index Error when Report is run on Web
Post Author: mhamill
CA Forum: Crystal Reports
I have a report which is being published and viewed on the web via a CrystalReportViewer app to display the reports (.rpt files)All other reports are running fine.
When I run this new report in Crystal on my desktop- It works fine. When I publish to the web I get this error:
System.Runtime.InteropServices.COMException: Invalid index
[COMException (0x8002000b): Invalid index.] CrystalDecisions.ReportAppServer.DataDefModel.FieldsClass.get_Item(Int32 Index) +0 CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(Int32 index) +30 CrystalDecisions.CrystalReports.Engine.ParameterFieldDefinitions.get_Item(String fieldName) +46 CrystalDecisions.CrystalReports.Engine.ReportDocument.SetParameterValue(String name, Object val) +144 webViewer.webViewer.Page_Load(Object sender, EventArgs e) in C:\Inetpub\wwwroot\reportTool\webViewer\webViewer.aspx.vb:68 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +750
I have REMOVED the parameter field from the report and still get this error. When I view the SQL there is no WHERE clause in the statement.
Any Ideas? It is an elaborate report and I dont want to start over.Post Author: Ted Ueda
CA Forum: JAVA
The PSReportFactory service, CR Page Server, is only for viewing Crystal Report formats, and not instances in other formats.
For the other formats, ensure you list the SI_FILES property in the InfoStore query, then cast the resulting InfoObject to IContent. The IContent interface support methods to stream the file content from the File Repository Server.
Sincerely,
Ted Ueda -
Invalid Index in Crystal Report
Hello,
I have written a code which displays records in the crystal report filtered by a textbox in the windows form. I wanted to pass the value of the textbox into the parameter field found in the header of the report. Please help anyone.
SqlConnection conn = conString.getCon();
ReportDocument cy = new ReportDocument();
dt1 ds = new dt1();
conn.Open();
cy.Load(Application.StartupPath + @"\crpt.rpt");
SqlDataAdapter da = new SqlDataAdapter("exec viewInfo @gen", conn);
da.SelectCommand.Parameters.AddWithValue("@gen", txtGender.Text);
da.Fill(ds.Info);
cy.SetDataSource(ds);
cy.SetParameterValue("gName", txtGender.Text); // prompts invalid index although I did check this already
//Everything works except this line
crystalReportViewer1.ReportSource = cy;
conn.Close();
Thanks in advance.Hi dptmpc,
Thank you for posting in MSDN forum.
Since
this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based on your issue, since this Crystal Report is a third-party report, we are not support it. So I suggest you could try to consult this issue to this Crystal Report site:http://scn.sap.com/community/crystal-reports/content?filterID=contentstatus%5bpublished%5d~objecttype~objecttype%5bthread%5d
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Will BW indexing help Webi reports performance
Hi Experts,
Environment
BO Version:4.1 SP3
Reporting Database:BW 7.4 sp3
Recently we have applied the OSS note :. 0001898395 so that we enabled index on the master data.
We have applied the note and had the index on the 0profit_ctr in the Infoobject: 0mat_plant.
Reports are fast in BEX side but there is no difference in webi reports performance.
Our opinion is if BEx performance is increased obviously WEbi performance also should increase.
Please post your experiences..
Thank you,,Several things will affect the report speed. Note that there are two halves to it - the data source fetch time and the report render time.
Data source fetch time is the time that it takes for all the data to be returned. BO will always look slower than the native tool because the native tool starts spooling out results as soon as it retrieves the first one - the more data returned, the slower BO will look by comparison.
Report render time will depend upon the number and complexity of variables as well as the number of rows returned.
Reducing the volume of data with correct aggregations and filters rather than summing and filtering at report level are the two best ways to improve performance without database/universe access. -
Error while refreshing WEBi Report : Supplied XML Invalid
Hi,
I have a universe buit on BI query in production environment.
I changed the query in BI directly in PRD. The only chnage i did was ,unhide the keyfigure which was hidden originally as i wanted to see the data it brings in BEx analyzer.
Then i agian chaged that key figure to Hidden.
now the WEBi reports which are built on the universe which uses this bi qury is not getting refreshed.
It gives the error : Supplies XML invalid
I refreshed the Universe and Parsed it.there was 1 parsing erroe in Filter.Still i exported the universe.
Now generally the WEBI reports start working after re exporting the universe, but this time it is not working.
What can be done in this case.???
I dont think it is because of parsing error as i have exported the same universe earlier with same error and reports worked fine that time.
following is in the WHERE section of the filter:
<FILTER KEY="[!V000006]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Posting date','D',,mono,free)"/></CONDITION></FILTER>How you tried editing Webi report ?
Its possible that your changes to Bex query while propagated to Universe after structure refresh, have changed some of the objects, and that change is not in Webi report yet, you'll need to edit it and maybe re-map objects..... -
I've Main Report + 5 sub report. All of this in a 1 file named _rptBorang.rpt.
This _rptBorang.rpt consists of
1. Main Report
2. _spupimSPMBorang.rpt
3. _spupimSTPMBorang.rpt
4. _spupimSijilDiploma.rpt
5. _spupimKoQ.rpt
6. _spupimPilihanProg.rpt
When I preview the report, the Enter values dialog box ask 7 parameters. It's
1. idx
2. tbl_MST_Pemohon_idx
3. tbl_MST_Pemohon_idx(_spupimSPMBorang.rpt)
4. tbl_MST_Pemohon_idx(_spupimSTPMBorang.rpt)
5. tbl_MST_Pemohon_idx(_spupimSijilDiploma.rpt)
6. tbl_MST_Pemohon_idx(_spupimKoQ.rpt)
7. tbl_MST_Pemohon_idx(_spupimPilihanProg.rpt)
My ASP.NET code as following,
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="_cetakBorang.aspx.vb" Inherits="_cetakBorang" title="SPUPIM" %>
<%@ Register assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web" tagprefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head id="Head1" runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1n" runat="server">
<div align="center">
<asp:Label ID="lblMsg" runat="server" ForeColor="Red"></asp:Label>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="true" />
</div>
</form>
</body>
</html>
Imports System.configuration
Imports System.Data.SqlClient
Imports System.Web.Security
Imports CrystalDecisions.Shared
Imports CrystalDecisions.CrystalReports.Engine
Partial Class _cetakBorang
Inherits System.Web.UI.Page
Private Const PARAMETER_FIELD_NAME1 As String = "idx"
Private Const PARAMETER_FIELD_NAME2 As String = "tbl_MST_Pemohon_idx"
Private Const PARAMETER_FIELD_NAME3 As String = "tbl_MST_Pemohon_idx(_spupimSPMBorang.rpt)"
Private Const PARAMETER_FIELD_NAME4 As String = "tbl_MST_Pemohon_idx(_spupimSTPMBorang.rpt)"
Private Const PARAMETER_FIELD_NAME5 As String = "tbl_MST_Pemohon_idx(_spupimSijilDiploma.rpt)"
Private Const PARAMETER_FIELD_NAME6 As String = "tbl_MST_Pemohon_idx(_spupimKoQ.rpt)"
Private Const PARAMETER_FIELD_NAME7 As String = "tbl_MST_Pemohon_idx(_spupimPilihanProg.rpt)"
Dim myReport As New ReportDocument
'rpt connection
Public rptSvrNme As String = ConfigurationManager.AppSettings("rptSvrNme").ToString()
Public rptUsr As String = ConfigurationManager.AppSettings("rptUsr").ToString()
Public rptPwd As String = ConfigurationManager.AppSettings("rptPwd").ToString()
Public rptDB As String = ConfigurationManager.AppSettings("rptDB").ToString()
Private Sub SetCurrentValuesForParameterField(ByVal reportDocument As ReportDocument, ByVal arrayList As ArrayList, ByVal paramFieldName As String)
Dim currentParameterValues As New ParameterValues()
For Each submittedValue As Object In arrayList
Dim parameterDiscreteValue As New ParameterDiscreteValue()
parameterDiscreteValue.Value = submittedValue.ToString()
currentParameterValues.Add(parameterDiscreteValue)
Next
Dim parameterFieldDefinitions As ParameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields
Dim parameterFieldDefinition As ParameterFieldDefinition = parameterFieldDefinitions(paramFieldName)
parameterFieldDefinition.ApplyCurrentValues(currentParameterValues)
End Sub
Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Not IsPostBack Then
publishReport(Convert.ToInt32(Session("applicantIdx")), Convert.ToInt32(Session("applicantIdx")))
End If
End Sub
Private Sub publishReport(ByVal idx As Integer, ByVal tbl_MST_Pemohon_idx As Integer)
Try
Dim reportPath As String = String.Empty
reportPath = Server.MapPath("_rptBorang.rpt")
myReport.Load(reportPath)
myReport.SetDatabaseLogon(rptUsr, rptPwd, rptSvrNme, rptDB)
Dim arrayList1 As New ArrayList()
arrayList1.Add(idx)
SetCurrentValuesForParameterField(myReport, arrayList1, PARAMETER_FIELD_NAME1)
Dim arrayList2 As New ArrayList()
arrayList2.Add(tbl_MST_Pemohon_idx)
SetCurrentValuesForParameterField(myReport, arrayList2, PARAMETER_FIELD_NAME2)
Dim arrayList3 As New ArrayList()
arrayList3.Add(tbl_MST_Pemohon_idx)
SetCurrentValuesForParameterField(myReport, arrayList3, PARAMETER_FIELD_NAME3)
Dim arrayList4 As New ArrayList()
arrayList4.Add(tbl_MST_Pemohon_idx)
SetCurrentValuesForParameterField(myReport, arrayList4, PARAMETER_FIELD_NAME4)
Dim arrayList5 As New ArrayList()
arrayList5.Add(tbl_MST_Pemohon_idx)
SetCurrentValuesForParameterField(myReport, arrayList5, PARAMETER_FIELD_NAME5)
Dim arrayList6 As New ArrayList()
arrayList6.Add(tbl_MST_Pemohon_idx)
SetCurrentValuesForParameterField(myReport, arrayList6, PARAMETER_FIELD_NAME6)
Dim arrayList7 As New ArrayList()
arrayList7.Add(tbl_MST_Pemohon_idx)
SetCurrentValuesForParameterField(myReport, arrayList7, PARAMETER_FIELD_NAME7)
Dim parameterFields As ParameterFields = CrystalReportViewer1.ParameterFieldInfo
CrystalReportViewer1.ReportSource = myReport
Catch ex As Exception
lblMsg.Text = ex.Message
End Try
End Sub
Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
myReport.Close()
End Sub
End Class
The result was, my ASP.NET return error --- > Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
I'm stuck
Really need help
Edited by: WKM1925 on Feb 22, 2012 11:49 AMFirst off, it would really be nice to have the version of CR you are using. Then
1) does this report work the CR designer?
2) What CR SDK are you using?
3) If .NET, what version?
4) Web or Win app?
5) What OS?
Then, please re-read your post and see if it actually makes any sense. To me, it's just gibberish...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Error while refreshing webi report
SAP BO XI 3.1, when i am trying to refresh data in a webi report, its giving error, Invalid prompt definition contact BO admin WI 00005.
Though i deleted all filters in Bex query, save the query, import universe, refresh univerese, save universe, export universe still webi report is showing the same error, but if all the filters are removed it shouldn't show that error?
After universe is refreshed clicked the check button it showed me 15 errors on filters with message Invalid prompt definiton, supplied XML doc is not valid.
Can any one please help me out.
Thanks.I am getting this error when i refresh the webi report.
ERROR:
Multiple query filters contain a prompt with the same text, but the
prompts use a different opernd type or operator count of values. (WIS: 0015)
I got answer for this error.
The query has multiple prompts that display the same message. Web Intelligence combines prompts with the same message and displays the prompt once. If the operator defined for some of these prompts requires you to enter one value while the operator in other prompts with the same message requires you to enter multiple values, Web Intelligence cannot combine the prompt.
But can anyone please explain me what is the cause of error in brief? i didn't get what does prompt with same text means? -
To integrate a web report in a web application
hi,
i have created a web report using ReportBuilder (wizard).
i have saved that file as a jsp,
my question is can i integrate that web report in any web application ,if yes how? plz let me know.
thx
abdul.Hi Abdul,
The answer is yes, you can integrate your report in any web application as any other normal JSP. You can package the JSP as part of a WAR and deploy it on an application server. The only requirements are:
reports_tld.jar must be available to the application. You can put in inside the WEB-INF/lib directory of the web application.
Reports Server must be available to the JSP. If you are using Oracle9iAS for deploying the JSP, the Reports server is automatically available. If you are using some other application server like WebLogic, you can use the J2EE Thin Client (http://otn.oracle.com/products/reports/htdocs/getstart/examples/Tools/index.html)
Also see the following thread on this Forum for deployment instructions:
Where to put jsp files for web layout report?
Navneet. -
Retrieving Object Names from a WEBI report
Hello,
I have to couple of Webi reports assigned to an universe. Can anyone tell me if there is a option to get the different universe objects, which are used in each Webi report query via JSP. I couldn't find a helpful method in the BusinessObjects Enterprise Web Services API, which would prodive this function.
Please provide steps to follow how could I get these used objects.
Thanks in advance,
DavidI found a solution for my problem:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/e06b823c-cc66-2b10-2f94-8d3151c2b4a4 -
Error While Run the WebI Report on SAP BW Query
Hi
I have build the universe on SAP BW Query . I built the same universe on the SAP BW DEV and SAP BW Test
When I tried to run the WEBI Report on the Universe which is built on the SAP BW Test
WebI Report is prompting for the below values
Calendar Year
Profit Center
Profit Center Hierarchy
Version.
Here I can see the List of values for the Calendar Year and Profit Center. Its giving me below error when I look for list of values for the Profit Center and Profit Center Hierarchy.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions:
1. Why I am getting this error. Because of authentication or configurations set on the Profit Center and Profit Center Hierarchy objects? If so , please let me know what I need to set?
When I tried to run the same WEBI Report on universe which build on SAP BW Dev Query. I can see list of values for the Calendar Year, Version, Profit Center, Profit Center Hierarchy.
But when I selected the values and tried to run the report. I got below error.
u2018Query 1 - P&L Structure Monthly_Devtst
Database error: [SOFA Driver] : The MDX query SELECT NON EMPTY HIERARCHIZE( {[Measures].[4CEX5LZ5571LCZHJBK0L0360P],[Measures].[4CEX5MM6Q2UPWV3VT27LU9261]} ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON COLUMNS , NON EMPTY HIERARCHIZE( { [0CALMONTH].[LEVEL00].MEMBERS } ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [ZFIGLPCBM/ZZFIGLPCBM04_Q011] SAP VARIABLES [!V000001] INCLUDING =[0PROFIT_CTR 1000HCICONS08] [!V000002] INCLUDING =2 [!V000003] INCLUDING =2008 [!V000004] INCLUDING =000 failed to execute with the error Value "0000000002" for variable "Profit Center" is invalid. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions :
1. What is this error? Please suggest the solution to run the report successfully.
Also I am attaching Print Screens of DEV and Test reports Prompts and Errors.
Here I am using Business Objects XI R2 SP4
I am sorry if I confused you with elaborated explanation, I have very less knowledge of BO and SAP BW ..
Please help me with your valuable suggestions.
Thanks,
AnithaHi Ingo,
- the BI Query in the Test system is running correct and all the variables do work ?
Yes, BI Query is working fine in the Test System and I can see all the variables too
In BI Query I can see values for Calendar Year, Version, Profit Center, Profit Center Hierarchy
- the Universe has all the variables ?
Yes, Universe has all the variables.
- do you see values in the Web Intelligence prompts when you run the report ?
No,
I can only see values for the Calendar Year & Version in the Web Intelligence Prompt.
When I try to see values for the Profit Center & Profit Center Hierarchy in the Web Intelligence Prompt, its showing below error.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
I can send you the Print Screens of Prompts & Errors, but i don't know how to attach the file here.
Thanks,
Anitha -
Drill by is not enabled in BO 4.0 WebI report
Hi,
In one of my report I have to do Drill by. But when I right click on the dimension I am able to see only Drill Down that is enabled.
Drill by is not enabled. Please let me know how to enable Drill By in BO 4.0 WebI report.
Thanks in advance
LavanyaHai
Enable drill mode right in BOE 4.0
http://www.sdn.sap.com/irj/scn/web-intelligence40-elearning-all
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e40af9-0d6a-2e10-b58a-c4ecde511a6e
Thank u -
Error while running Webi report that uses Custom Dimension object(SAP BW)
Hi,
I have a universe that is based on SAP BW.I have created a custom dimension object that displays the maximum date.
The object syntax is
<expression>Max(@Select(CPS Online\Calendar day))</expression>
The object parses successfully.
The object 'Calendar Day ' is a defaultobject created during universe creation from the BW query.It is defined as [0CALDAY].[LEVEL01]
I tried to create a Webi report using this object and a measure .On running the query it throws the following error:
A database error occured. The database error text is: The MDX query WITH MEMBER [Measures].[EBC10672-C0DA-4998-93,80,D3,FF,C3,E8,A2,22] AS ' Max{[0CALDAY].[LEVEL01]} ' SELECT { [Measures].[EBC10672-C0DA-4998-93,80,D3,FF,C3,E8,A2,22], [Measures].[4JCOSFOKKCUR3RMBPNROFKQQD] } ON COLUMNS , NON EMPTY [0CALDAY].[LEVEL01].MEMBERS DIMENSION PROPERTIES [0CALDAY].[20CALDAY] ON ROWS FROM [ZCCPSONL/ZCPSONLINE] failed to execute with the error Invalid MDX command with (. (WIS 10901)
I have tried every possible syntax I could think of but I keep getting this error each time.I have set the object type to Number (even though it is actually a Date), I have tried writing the MDX inside the Max instead of the @select , but nothing seems to work.Could anyone please let me know why this error is occuring?Is there anything wrong with the syntax or is there any setting in Webi needed before a custom dimension object can be used on it.Can you see data for Custom object @ BEx level??
YES, then just try to re-create the same variable and Save the BW query.
Now do View - refresh Strusture @ Universe. And you can see Filter for the same, just Parse it, just whether it is OK or not.
OK -- then Export the Universe and create WebI reports, this will come as Prompt.
Hope it will helps you.
Thank You!!
Sent from iPhone -
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Hi All,
When I am refreshing Webi report, getting error:
Invalid Prompt definition. See your Business Objects administrator. (Error: WIS 00005)
Please help.
Regards,Hi,
Please search the Knowledge Base for Articles before posting. www.service.sap.com/xsearch
You need to look at :
Note 1404402 - Expanding an WebI LOV prompt, using SAP BW Hierarchy node, fails with errors. (FixPack2.5)
Note 1569069 - Invalid prompt definition
Regards,
H -
Re: Schedule a WEBI report once the BW process chain loading is completed
Hello Guys,
I want to schedule a webi report once the process chain in bw is sucessfully completed .Did any one face this situation before ?
is it possible to trigger a event from bw to webi and schedule a webi report to end users once the process chain loads the data into cube sucessfully
i searched sdn but didnt find any help related to this topic
can any one help me with the above issue asap
step 1 : Trigger the process chain load the data till cube
step 2 : add a process type whcih has program - at the end of the process chain
step 3 : trigger a event in BO inorder to schedule a webi report to end users from this program ? how to do it
i want to know how to trigger a event in bo from bw using r/3 program inorder to schedule a WEBI report
any help on this topic is highly appreciatedHi Venkat,
At present, there is no standard functionality available in SAP NetWeaver 2004s BW/BOBJ that offers this integration and automation.But you can do it as given in following link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09033ab-4593-2e10-5fa0-b23bcfa1575a?QuickLink=index&overridelayout=true&51887500308956
Regards,
Pushkar Dhale
Maybe you are looking for
-
Report for conversion payment of vendor against grn quantity.
Dear all, In our scenario, we are doing conversion payment of vendor against SCO (subcontracting order) on the basis of GRN quantity. But, I am unable to found that how much conversion payments are pending against grn quantity in one month. Is ther
-
Edit: Looks like I'm not sure how to delete a post so I'll just update with how I resolved the issue: by opening LV8.5 and running a .VI from this instance, the option to use 8.5 became available in the 'open with...' list! Howdy! Somehow over the w
-
Cant Receive an Email to Myself
I have had this problem for some time and am just now thinking I can obtain help from the discussions group. For some reason I am not receiving any ccs or bccs when I write an email. Additionally I cant seem to send an email to myself and receive it
-
I want to use both of these applications and I have a question- If I import my photos into Aperture and then import them into Iphoto from Aperture does it create a 2nd file or does it use the same main file? If there is a way to set it up to do this
-
Hi, Can anyone have any example of using pluggable mapping and how we can make mapping generic by using pluggable mapping. Regards Ani