"Invalidation floating point ooperation" error mas...

Did anybody else face this kind of error massage? My properly working Skype started it a few weeks ago and reinstallation doesn't help. What the hell is it? And how could I repair this error?
Thx

Similar Messages

Invalid Floating Point Error

I have one Captivate 3 project published as a Stand Alone
project with Flash 8 selected. There are 36 slides, no audio, no
eLearning, SWF size and quality are high.
One person who runs this gets an "Invalid Floating Point"
error when he tries to run it the first time. He is running Windows
XP SP2, Firefox 3.0.4. and Flash Player 10.0.12.36. Other Captivate
projects I've created run fine for him. This one sometimes runs
after the first Error message.
Any thoughts on the cause and fix?
Thanks,
Janet

iMediaTouch probably doesn't support Floating Point formats - it certainly doesn't mention them in the advertising. Try saving your files as 24-bit PCMs, and they should import fine.

Qosmio F50 - Webcam error - Invalid floating point operation

Hi
I have Qosmio F50 (4 Weeks old) problem is after two weeks webcam has stopped working *Invalid floating point operation*
I have to close program via task manager, *Camera assistant software not responding*.
Have tried following.
Update all drivers, system restore
Toshiba help line after all efforts suggested complete reinstall this is to aggressive for me as it would loose certain software on laptop that I had to transfer from old PC and had to plead with certain software companies to transfer (only one license etc).
Has anybody else had this problem and is there a simple solution
Will

Hi,
I have the same problem, Laptop Qosmio F50 is 4 weeks old and now the webcam stopped working.... it's quite annoying, whenever I start the application it says ' Invalid floating point operation'. To me this sounds as some issues in the software and the compatibility on vista, I think it could happen after putting the laptop to hibernate or suspension state and then when it comes back, the webcam stops working. so let's see if toshiba realeases a fix or new version quickly, otherwise I would be quite disspointed with such a good laptop.

Error - "Invalid floating point operation"

I keep getting a message that says "invalid floating point operation" and the files that I am trying to read are scrambled. They used to be ok. Please advise....

Hi,
I have the same problem, Laptop Qosmio F50 is 4 weeks old and now the webcam stopped working.... it's quite annoying, whenever I start the application it says ' Invalid floating point operation'. To me this sounds as some issues in the software and the compatibility on vista, I think it could happen after putting the laptop to hibernate or suspension state and then when it comes back, the webcam stops working. so let's see if toshiba realeases a fix or new version quickly, otherwise I would be quite disspointed with such a good laptop.

"Floating point exception" error

hello :
i install sap 4.7 in redhat, after using ./install that extracting the files to instdir ,
the sapinst don't can start setup and present the error "floating point exceprion"
please help me!
thanks

Dear dongyang xu,
what is your patchlevel of rhel3? Please make sure, that you run the latest Quarterly Update of RHEL3 which is QU9 if I remember correctly.
Please make also sure, that you are using the latest available sapinst for R/3 4.7 Enterprise.You can download it from <a href="http://service.sap.com/patches">http://service.sap.com/patches</a>.
Additionally, what version of java have you installed? What's the output of:
'java -version' and
'echo $JAVA_HOME'
Thanks
Hannes Kuehnemund
SAP LinuxLab

Dtrace Floating Point gives error on x86

When I try to create a floating point constant in dtrace x86:
BEGIN
printf ("%f", 1.0);
exit (1);
I get the error:
dtrace: failed to compile script special.d: line 3: floating-point constants are not permitted
Am I using the floating point constant incorrectly, or are floating point constants not permitted in the x86 platform.
Thanks,
Chip

Then what is meant at the bottom of page 48 of the
Solaris Dynamic Tracing Guide where it talks about
floating-point constants?
ChipSorry for not making that sufficiently clear. We are reserving that syntax for possible future use, but you cannot specify floating-point constants at present, and you cannot perform floating-point arithmetic in D. The only legal use of floating-point is that you can trace one or more data objects or structures that contain floating-point values and format the results using printf() and the various %f, %g formats.
-Mike

Floating Point Arithmatic Error

Hi,
I know actionscript represents numbers and double precision
floating point values. I'm having a problem where double arithmatic
in actionscript doesn't match the results of the same double
arithmatic in C++ / C#.
EXAMPLE:
In C++ / C#:
double x, y, x1, y1;
x = 209.4;
y = 148.8;
x1 = 203.0;
y1 = 145.0;
double ddx = x - x1;
double ddy = y - y1;
RESULT
ddx: 6.4000000000000057
ddy: 3.8000000000000114
In Flash ActionScipt 2:
var x, y, x1, y1;
x = 209.4;
y = 148.8;
x1 = 203.0;
y1 = 145.0;
var ddx = x - x1;
var ddy = y - y1;
RESULT
ddx: 6.39999999999992
ddy: 3.80000000000024
After researching Flash / Actionscript "var" stores numerical
values as doubles ( 8 bytes ) just like doubles are stored in C++ /
C# ( 8 bytes ). Why would there be a difference between the results
of ddx and ddy? Are there different implementations of double
floating point math? If so, Is there a way I can mimic the Flash /
Actionscript version in C++ / C#?
Any help would be great!
Thanks!

Hmmm, so you're saying the actual binary representation is
the same but they're just displayed differently?

Floating point rounding error

I've been working on an egyptian fraction program and for some reason I cant seem to figure out a way to fix this rounding error. An egyptian fraction is a fraction that can be expressed as a sum of fractions eg. 3/4 = 1/2 + 1/4. For some reason on certain fractions it rounds up and skips the correct fraction to subtract. When I run 2/7 its supposed to equal 1/4 + 1/28, but gives me 1/4 + 1/29 and decides to round. This is my code for the problem.
public class EgyptianFraction{
    private static double epsilon = 1.0e-7;
    public static void main(String args[]){
        greedySearch(2.0/7.0);
    public static void greedySearch(double fraction){
        for(int i = 2; fraction > epsilon; i++){
            if(fraction - (1.0/i) >= 0){
                fraction -= (1.0/i);
//*****Output******
//0.0357142857142857 - 0.03571428571428571 = -1.3877787807814457E-17
}When I print out all of the math involved it says that it gives the output above. They are fairly close but for some reason it makes the 1/28 bigger then the current fraction. The program should subtract 1/28 and then the fraction should be close enough to 0 and end. Is there any way you guys can think of to fix this problem?

You have given the error as epsilon, so you can't expect `fraction - 1.0/i >= 0` to give an exact answer.
Given your error is +/- epsilon, this expression should be
fraction - 1.0/i >= epsilon || fraction - 1.0/i >= -epsilon
or just
fraction - 1.0/i >= -epsilon
If you change this you get 1/4 + 1/28 as the answer,

Cannot get Oracle 10g to start on a G5. Floating point exception

After a very painful 10g (EE) installation process i.e fixing all the following:
1) Created the missing /opt directory
2) Installation of XCode 1.2
3) Fixing the root.sh file
4) Downloaded the crstl file provided by Ron
5) Copied /etc/oratab/oratab to /etc/oratab
I tried bringing up the Oracle 10g instance by logging onto Sql*Plus as sysdba and running
startup nomount pfile ='/Users/oracle/admin/db01/scripts/init.ora''. The instance comes up for a few socunds and crashes. This is what i get in the alert.log
==========================================================
Sat Jul 17 11:40:08 2004
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
KCCDEBUG_LEVEL = 0
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
Dynamic strands is set to TRUE
Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 10.1.0.3.0.
System parameters with non-default values:
processes = 150
sga_target = 146800640
control_files = /Users/oracle/oradata/db01/control01.ctl, /Users/oracle/oradata/db01/control02.ctl, /Users/oracle/oradata/db01/control03.ctl
db_block_size = 8192
compatible = 10.1.0.2.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = /Users/oracle/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=db01XDB)
job_queue_processes = 10
background_dump_dest = /Users/oracle/admin/db01/bdump
user_dump_dest = /Users/oracle/admin/db01/udump
core_dump_dest = /Users/oracle/admin/db01/cdump
db_name = db01
open_cursors = 300
pga_aggregate_target = 16777216
PMON started with pid=2, OS id=4037
MMAN started with pid=3, OS id=4039
DBW0 started with pid=4, OS id=4041
LGWR started with pid=5, OS id=4043
CKPT started with pid=6, OS id=4045
SMON started with pid=7, OS id=4047
RECO started with pid=8, OS id=4049
Sat Jul 17 11:40:16 2004
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
CJQ0 started with pid=9, OS id=4051
Sat Jul 17 11:40:16 2004
starting up 1 shared server(s) ...
Sat Jul 17 11:40:18 2004
Errors in file /Users/oracle/admin/db01/bdump/db01_ckpt_4045.trc:
ORA-07445: exception encountered: core dump [semop+8] [SIGFPE] [Invalid floating point operation] [0xA0004CE4] [] []
Sat Jul 17 11:40:19 2004
Errors in file /Users/oracle/admin/db01/bdump/db01_mman_4039.trc:
ORA-07445: exception encountered: core dump [semop+8] [SIGFPE] [Invalid floating point operation] [0x41EDB3C] [] []
Sat Jul 17 11:40:21 2004
Errors in file /Users/oracle/admin/db01/bdump/db01_pmon_4037.trc:
ORA-00822: MMAN process terminated with error
Sat Jul 17 11:40:21 2004
PMON: terminating instance due to error 822
Instance terminated by PMON, pid = 4037
==========================================================
Any idea on what needs to be done to fix this error. I remember that i had the very same issue with the Oracle 9i R2 Developers release.
Any help will be greatly appreciated.

After a very painful 10g (EE) installation process
i.e fixing all the following:<snip>
Sat Jul 17 11:40:19 2004
Errors in file
/Users/oracle/admin/db01/bdump/db01_mman_4039.trc:
ORA-07445: exception encountered: core dump [semop+8]
[SIGFPE] [Invalid floating point operation]
[0x41EDB3C] [] []
Sat Jul 17 11:40:21 2004
Errors in file
/Users/oracle/admin/db01/bdump/db01_pmon_4037.trc:
ORA-00822: MMAN process terminated with error
Sat Jul 17 11:40:21 2004
PMON: terminating instance due to error 822
Instance terminated by PMON, pid = 4037==============================================> Any idea on what needs to be done to fix this error.
I remember that i had the very same issue with the
Oracle 9i R2 Developers release.
Any help will be greatly appreciated.You mentioned the 9ir2 release. Do you still have any reference to the 9ir2 software in your environment ? With a little luck you have, and in that case it not so hard to find a solution ...
Ronald.
http://homepage.mac.com/ik_zelf/oracle

Floating-point Error (Win XP Pro, Win XP Home, Win Server 2003)

I have installed Safari on three machines. All three are have the same issue. When I load Safari, it comes up fine. If I wait for the initial page to load completely, I will get the error below. If I hit the X (stop) before the page loads completely, I get no error. I can type a new URL (www.google.com for example) and go to the new page. But, the same thing will happen if I wait for the entire page to load. This is happening on Windows XP Home, Windows XP Professional, and Windows Server 2003 Standard. All three machines have a similiar software configuration.
All have the following installed:
- Skype
- Visual Studio 2005
- SQL Server 2005 Client Tools
- SonicWall VPN Client
- uTorrent
The error is:
The exception Floating-point invalid operation.
(0xc0000090) occurred in the application at location 0x6dc29f5c.
Anyone have a work-around? Is this a known issue?

ttt

R6002 - floating point not loaded / C++ Runtime Error

Good Evening,
I have been having this problem with Adobe Bridge for a while and tonight sat down to try and solve it. Fresh version of Windows XP reinstalled all programs and this is still happening! Any Ideas?
This error only occurs with Adobe Bridge, I can load Photoshop etc.. all fine.
Error:
"Runtime Error!
Program: C:\ProgramFiles\Adobe\Adobe Bridge CS3\Bridge.exe
R6002
- floating point not loaded"
Here is a print screen..
http://images.unbrokenphotography.co.uk/BridgeError.jpg

Is there are answer to this problem? This error message is appearing on an entire lab full of computers. We are running Web Premium CS4
I have tried to reset the Bridge Preferences:
Hold down the Ctrl key and click on Bridge icon to start.
Should get a reset window with 3 options.
Choose the first option
I still get "Runtime Error! Program: C:\Prgram Files\Adobe\Adobe Bridge CS4\Bridge.exe R6002 -floating point support not loaded"

Designing for floating point error

Hello,
I am stuck with floating point errors and I'm not sure what to do. Specifically, to determine if a point is inside of a triangle, or if it is on the exact edge of the triangle. I use three cross products with the edge as one vector and the other vector is from the edge start to the query point.
The theory says that if the cross product is 0 then the point is directly on the line. If the cross product is <0, then the point is inside the triangle. If >0, then the point is outside the triangle.
To account for the floating point error I was running into, I changed it from =0 to abs(cross_product)<1e-6.
The trouble is, I run into cases where the algorithm is wrong and fails because there is a point which is classified as being on the edge of the triangle which isn't.
I'm not really sure how to handle this.
Thanks,
Eric

So, I changed epsilon from 1e-6 to 1e-10 and it seems to work better (I am using doubles btw). However, that doesn't really solve the problem, it just buries it deeper. I'm interested in how actual commercial applications (such as video games or robots) deal with this issue. Obviously you don't see them giving you an error every time a floating point error messes something up. I think the issue here is that I am using data gathered from physical sensors, meaning the inputs can be arbitrarily close to each other. I am worried though that if I round the inputs, that I will get different data points with the exact same x and y value, and I'm not sure how the geometry algorithms will handle that. Also, I am creating a global navigation mesh of triangles with this data. Floating point errors that are not accounted for correctly lead to triangles inside one another (as opposed to adjacent to each other), which damages the integrity of the entire mesh, as its hard to get your program to fix its own mistake.
FYI:
I am running java 1.6.0_20 in Eclipse Helios with Ubuntu 10.04x64
Here is some code that didn't work using 1e-6 for delta. The test point new Point(-294.18294451166435,-25.496614108304477), is outside the triangle, but because of the delta choice it is seen as on the edge:
class Point
     double x,y;
class Edge
     Point start, end;
class Triangle
     Edge[] edges;
     public Point[] getOrderedPoints() throws Exception{
          Point[] points = new Point[3];
          points[0]=edges[0].getStart();
          points[1]=edges[0].getEnd();
          if (edges[1].getStart().equals(points[0]) || edges[1].getStart().equals(points[1]))
               points[2]=edges[1].getEnd();
          else if (edges[1].getEnd().equals(points[0]) || edges[1].getEnd().equals(points[1]))
               points[2]=edges[1].getStart();
          else
               throw new Exception("MalformedTriangleException\n"+this.print());
          orderNodes(points);
          return points;
        /** Orders node1 node2 and node3 in clockwise order, more specifically
      * node1 is swapped with node2 if doing so will order the nodes clockwise
      * with respect to the other nodes.
      * Does not modify node1, node2, or node3; Modifies only the nodes reference
      * Note: "order" of nodes 1, 2, and 3 is clockwise when the path from point
      * 1 to 2 to 3 back to 1 travels clockwise on the circumcircle of points 1,
      * 2, and 3.
     private void orderNodes(Point[] points){
          //the K component (z axis) of the cross product a x b
          double xProductK = crossProduct(points[0],points[0], points[1], points[2]);
          /*        (3)
           *          +
           *        ^
           *      B
           * (1)+             + (2)
           *       ------A-->
           * Graphical representation of vector A and B. 1, 2, and 3 are not in
           * clockwise order, and the x product of A and B is positive.
          if(xProductK > 0)
               //the cross product is positive so B is oriented as such with
               //respect to A and 1, 2, 3 are not clockwise in order.
               //swapping any 2 points in a triangle changes its "clockwise order"
               Point temp = points[0];
               points[0] = points[1];
               points[1] = temp;
class TriangleTest
     private double delta = 1e-6;
     public static void main(String[] args) {
                Point a = new Point(-294.183483785282, -25.498196740397056);
          Point b = new Point(-294.18345625812026, -25.49859505161433);
          Point c = new Point(-303.88217906116796, -63.04183512930035);
          Edge aa = new Edge (a, b);
          Edge bb = new Edge (c, a);
          Edge cc = new Edge (b, c);
          Triangle aaa = new Triangle(aa, bb, cc);
          Point point = new Point(-294.18294451166435,-25.496614108304477);
          System.out.println(aaa.enclosesPointDetailed(point));
      * Check if a point is inside this triangle
      * @param point The test point
      * @return     1 if the point is inside the triangle, 0 if the point is on a triangle, -1 if the point is not is the triangle
      * @throws MalformedTriangleException
     public int enclosesPointDetailed(LocalPose point, boolean verbose) throws Exception
          Point[] points = getOrderedPoints();
          int cp1 = crossProduct(points[0], points[0], points[1], point);
          int cp2 = crossProduct(points[1], points[1], points[2], point);
          int cp3 = crossProduct(points[2], points[2], points[0], point);
          if (cp1 < 0 && cp2 <0 && cp3 <0)
               return 1;
          else if (cp1 <=0 && cp2 <=0 && cp3 <=0)
               return 0;
          else
               return -1;
         public static int crossProduct(Point start1, Point start2, Point end1, POint end2){
          double crossProduct = (end1.getX()-start1.getX())*(end2.getY()-start2.getY())-(end1.getY()-start1.getY())*(end2.getX()-start2.getX());
          if (crossProduct>floatingPointDelta){
               return 1;
          else if (Math.abs(crossProduct)<floatingPointDelta){
               return 0;
          else{
               return -1;
}

Floating Point Error

Hi all!
Does anybody understands the following Error Message or does anybody had it allready?
I <u>tried</u> to write a little 3D-Engine just for fun, but the kvm doesn�t wantme to.
Please help.
ERROR: floating-point constants should not appear
Error preverifying class J2mewtk.apps.DDD_Engine.src.DDD_Engine.Matrix_Operation
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
Thx in prev..

Ok, after years it even came to me that the KVM doesn�t support floatingpoint numbers. :-)
I found the MathFP package to be usefull for me, but can someone tell me where i have to put the package, so that i can import it? I am trying since hours ... ;-)

Error on floating point?

One can expect that 1.2 * 3.0 equals 3.60
But the following statement has the result: 3.5999999999999996
- System.out.println(1.2 * 3.0);
Why?
How can I control or estimate the floating point error?
Thanks in advance!

It is not a Java problem or a Java error. It is inherent to floating-point arithmetic.
1.2 can not be exactly represented in binary floating-point arithmetic. But 1.25 (that is 5 * (2 ^ -2)) can be.
If your problem requires exact decimal arithmetic, use BigDecimal instead. (It is very slow compared to the conventional floating-point arithmetic).
Please consult a textbook on numerical calculus for the techniques of dealing with floating-point error - it depends on the algorithm that you use for solving your problem.

ERROR: floating-point constants should not appear

ERROR: floating-point constants should not appear
Error preverifying class KGUI.KLabel
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
I get this error after adding this code to my application:
     private int C=0;
     private float D=0.0f;
     private int H=0;
     private float store=0.0f;
     private int pos=0;
     private int SH=0;
..................some code.....................
     H=1+ROWS*(f1.getHeight());
     if(H/kawalki.length>0){
          C=H/kawalki.length;
          D=kawalki.length/(H%kawalki.length);
          SH=C;
          if(D>=0.5f)
               SH++;
     }else{
          SH=1;
          D=kawalki.length/(H%kawalki.length);
.................some code..............
protected void keyPressed(int keyCode){
int game=getGameAction(keyCode);
switch(game){
case UP:
if (line>0){
line--;
               pos-=C;
               store-=D;
               if(store<0.0f){
                    pos--;
                    store=1.0f+store;
repaint();
break;
case DOWN:
if(line+ROWS<kawalki.length){
               line++;
               pos+=C;
               store+=D;
               if(store>=1.0f){
                    pos++;
                    store--;
repaint();
break;
Can anybody help me quick?

If the platform is CLDC 1.1 you can have floats. Run preverify to see the options. The cldc1.1 preverifier seems to have options to allow rejecting floats/doubles but the default seems to be to allow them.
Usage: preverify [options] classnames|dirnames ...
where options include:
-classpath <directories separated by ';'>
Directories in which to look for classes
-d <directory> Directory in which output is written (default is ./output/)
-cldc1.0 Checks for existence of language features prohibited
by CLDC 1.0 (native methods, floating point and finalizers)
-nofinalize No finalizers allowed
-nonative No native methods allowed
-nofp No floating point operations allowed
@<filename> Read command line arguments from a text file
Command line arguments must all be on a single line
Directory names must be enclosed in double quotes (")

"Invalidation floating point ooperation" error mas...

Similar Messages

Maybe you are looking for