IPad doesn't display AirPlay icon
Why my iPad doesn't display AirPlay icon?
Are AirPlay receivers on the same network? If not, no icon will be shown.
Similar Messages
-
Here goes, when Itunes is started (have tried pc reboot and itunes restart) no airplay icon, even though my airport express is connected to second stereo, with green light and confirmed newest firmware for device id A1264 etc. Can send audio to device and device works well.
BUT
Itunes can only see the wireless speakers when another airplay device (my iphone) pairs and PLAYS via the wireless speakers. THEN Itunes shows the airplay icon, I can then pair my PC to the wireless speakers, connect (says can't play audio because speakers are already paired), disconnect iphone airplay and then the PC connects and can play through wireless speakers.
This is a long process, some sort of glitch etc. and I figure it's an airport express thing maybe that is not announcing itself on the WIFI until it pairs to my iphone, or maybe it's a pc problem that my airplay networking via my PC is not announcing itself properly to bonjour WIFI ?
Hopefully someone can help me.
Thanks,
LaurentOpen control panel.
Choose Network and internet
Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
Choose wireless Network Connection or something similiar. If connected with ethernet then select it and press right button.
Click the properties button
Find Internet ''PROTOCOL VERSION 6(TCP/IPv6)'' anduncheck it, then click OK.
Click CLOSE
Restart your PC and try.
Reason For Problem
When u will use ipV6 , you have to setup your router and lan/wifi in ipv6 mode. Then bejour pass sound through ipv6 but when you use 2 mode ( ipv4 and ipv6 ) together benjour gets confuse some time it pass through in ipv6 and sometime ipv4 .if your router setup is ipv4 then, when banjour pass sound through ipv6 you will not see airplay button in itunes.
Hope it's clear to everyone .
Itunes -
JOptionPane.showMessage doesn't display message & icon in Solaris
Hi huys,
JOptionPane.showMessageDialog doesn't display message & icon in Solaris, but display is proper through XWin.
Any help is appreciated.
Edited by: Quest_4_Java on Oct 29, 2008 12:15 AMThere's a program called DockStar that lets you put badges on the dock icon for different folders. It's shareware and available here: http://www.ecamm.com/mac/dockstar/
I've got a smart mailbox named "Unread messages" that just collects ... all my unread messages (I do a lot of automagic sorting) and then have DockStar show how many messages are in that smart folder. -
[Plasma-Next] Docky doesn't display application icons
Hello,
I have a fresh Arch + Plasma 5 install running on my machine. I have followed the arch-wiki to get it up and running. However I have installed Docky and it's shooting errors at me. The main issue is that it doesn't display most of the applications icons. Screenshot here. The order of the apllications is Docky Settings, Firefox, Konsole, Separator, Trashcan, Weather. I am using the default Breeze icon theme and switching to a different one didin't help.
Output from terminal when running Docky:
[vilius@asus ~]$ docky
[Info 16:15:09.941] Docky version: 2.2.0 Release
[Info 16:15:09.960] Kernel version: 3.18.2.2
[Info 16:15:09.961] CLR version: 4.0.30319.17020
[Error 16:15:10.111] [SystemService] Could not initialize power manager dbus: 'Could not load type 'Docky.Services.SystemService+IUPowerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+IUPower'.'
[Info 16:15:10.113] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[IUPower] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeBattery () [0x00000] in <filename unknown>:0
[Error 16:15:10.115] [SystemService] Could not initialize Network Manager dbus: 'Could not load type 'Docky.Services.SystemService+INetworkManagerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+INetworkManager'.'
[Info 16:15:10.115] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[INetworkManager] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeNetworkManager () [0x00000] in <filename unknown>:0
[Info 16:15:10.122] [ThemeService] Setting theme: Transparent
[Warn 16:15:10.141] [DesktopItemService] Could not find remap file '/home/vilius/.local/share/docky/remaps.ini'!
[Info 16:15:10.328] [DockServices] Dock services initialized.
[Info 16:15:10.496] [PluginManager] Loaded "Trash".
[Error 16:15:10.499] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.499] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.500] [GLib-GIO] g_file_info_get_attribute_uint32: assertion 'G_IS_FILE_INFO (info)' failed
[Error 16:15:10.500] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.500] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.501] [GLib-GIO] g_file_info_get_icon: assertion 'G_IS_FILE_INFO (info)' failed
[Fatal 16:15:10.501] [GLib-GObject] g_object_ref: assertion 'G_IS_OBJECT (object)' failed
[Fatal 16:15:10.557] [GLib] Source ID 72 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 75 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 71 was not found when attempting to remove it
[Info 16:15:10.601] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
Cairo.Surface is leaking, programmer is missing a call to Dispose
Set MONO_CAIRO_DEBUG_DISPOSE to track allocation traces
[Info 16:15:10.677] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.817] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.818] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.831] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.831] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
I have also tried avant-window-navigator but had the same issues with it.
Please have a look at the output, maybe the icons problem is caused by some errors encountered before all the drawing?
Thank you!Hello,
I have a fresh Arch + Plasma 5 install running on my machine. I have followed the arch-wiki to get it up and running. However I have installed Docky and it's shooting errors at me. The main issue is that it doesn't display most of the applications icons. Screenshot here. The order of the apllications is Docky Settings, Firefox, Konsole, Separator, Trashcan, Weather. I am using the default Breeze icon theme and switching to a different one didin't help.
Output from terminal when running Docky:
[vilius@asus ~]$ docky
[Info 16:15:09.941] Docky version: 2.2.0 Release
[Info 16:15:09.960] Kernel version: 3.18.2.2
[Info 16:15:09.961] CLR version: 4.0.30319.17020
[Error 16:15:10.111] [SystemService] Could not initialize power manager dbus: 'Could not load type 'Docky.Services.SystemService+IUPowerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+IUPower'.'
[Info 16:15:10.113] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[IUPower] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeBattery () [0x00000] in <filename unknown>:0
[Error 16:15:10.115] [SystemService] Could not initialize Network Manager dbus: 'Could not load type 'Docky.Services.SystemService+INetworkManagerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+INetworkManager'.'
[Info 16:15:10.115] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[INetworkManager] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeNetworkManager () [0x00000] in <filename unknown>:0
[Info 16:15:10.122] [ThemeService] Setting theme: Transparent
[Warn 16:15:10.141] [DesktopItemService] Could not find remap file '/home/vilius/.local/share/docky/remaps.ini'!
[Info 16:15:10.328] [DockServices] Dock services initialized.
[Info 16:15:10.496] [PluginManager] Loaded "Trash".
[Error 16:15:10.499] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.499] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.500] [GLib-GIO] g_file_info_get_attribute_uint32: assertion 'G_IS_FILE_INFO (info)' failed
[Error 16:15:10.500] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.500] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.501] [GLib-GIO] g_file_info_get_icon: assertion 'G_IS_FILE_INFO (info)' failed
[Fatal 16:15:10.501] [GLib-GObject] g_object_ref: assertion 'G_IS_OBJECT (object)' failed
[Fatal 16:15:10.557] [GLib] Source ID 72 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 75 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 71 was not found when attempting to remove it
[Info 16:15:10.601] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
Cairo.Surface is leaking, programmer is missing a call to Dispose
Set MONO_CAIRO_DEBUG_DISPOSE to track allocation traces
[Info 16:15:10.677] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.817] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.818] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.831] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.831] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
I have also tried avant-window-navigator but had the same issues with it.
Please have a look at the output, maybe the icons problem is caused by some errors encountered before all the drawing?
Thank you! -
IPad doesn't display correct album art
I could really use some help here, I am at the end of my rope. I have HomeSharing on so that my iPads and iPhones will play music and movies from our iTunes library. I have an iPhone 5, an iPhone 4S, an iPad 4 and (2) iPad 2 models. Both iPhones and the iPad 4 will display the correct album art in the movies but the iPad 2's scramble up the album art. For instance on the iPad 4 shows the Aladdin album art where it says Aladdin is but on the iPad 2 (both of them) it will display random album art. So you'll be looking at a picture of Bug's Life but the line states that the movie is Aladdin. Now when you select that movie and it enters the info page where the play button is, the album art comes up correctly. It's just in the title screen or selection screen this happens. Then to add to that, the music and music videos all displays fine, the correct album art every time. For some reason, this is only happening in the movies. And again, only happening on the iPad 2's. There is no issue with the newer iPad or the iPhones. So is this a setting that is goofed? A software issue that I can't resolve? I would appreciate any input you can provide, especially if you can help me fix this!!
FYI, the iPad 2's are my daughter's so I have the PG restriction on making sure that they can't watch anything PG-13 or over. Although it won't display a PG-13 or over movie, it will display the album art (for instance it will show Hills Have Eyes instead of Aladdin although the text shows Aladdin and again, if you click on it the correct album art shows Aladdin in the info screen). I thought maybe the restrictions were the problem so I shut them off but that didn't resolve the issue.Me Too. Glad to hear I'm not alone in this...
I can't explain it. All my songs show the correct art in iTunes but it's often mismatched on the Nano. I've noticed that selecting a problem track in iTunes, get info and clicking "ok" on the already correct art, sometimes corrects the issue (for that one track) on the Nano after the next sync.. but not always.
p.s. Other posts say "restore" is the answer. I'll try that tonight. -
Stacks doesn't display the icons for files
My downloads stack doesn't show the icons for the files it contains
Best way to describe is by showing a photo
http://img130.imageshack.us/img130/6176/screenshot20100102at130.png
I don't know why this happens, any help would be appreciated, tried searching the internet for answers but couldn't find anything listing a similar problem*THANK YOU!!!*
I'd been having this problem for weeks and it was driving me nuts!! I tried installing the 10.6.3 v1.1 Combo Update today (thinking the problem was caused by the first upgrade to 10.6.3), but that obviously didn't work. Tried messing w/ Airfoil b/c some people complained about it screwing up icon previews; didn't work. Tried deleting the Quicklook.thumbnailcache; didn't work.
After reading this post I opened the Console and saw a .mkv file was screwing with quicklookd.
Deleted it -> problem solved!
Thanks again! -
[UNSOLVED] Urxvt doesn't display an icon
I've read all the stuff I can find about this, and I have had no luck.
Urxvt doesn't have an icon it's just a blank box where the icon should be. (Alt-tab, on the window border, etc.)
Any ideas?chrizel: Thanks for the link!
Any ideas why yaourt hangs while downloading libAfterImage-1.18.tar.gz? I am assuming that it is a problem at afterstep.org,as I can't seem to get the file, even directly off their website? Either way I will try again in a day or two.
Here is what the hang looks like:
-> Downloading libAfterImage-1.18.tar.bz2...
--2008-12-21 15:23:55-- ftp://ftp.afterstep.org/stable/libAfterImage/libAfterImage-1.18.tar.bz2
=> `libAfterImage-1.18.tar.bz2.part'
Resolving ftp.afterstep.org... 66.36.251.43
Connecting to ftp.afterstep.org|66.36.251.43|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /stable/libAfterImage ... done.
==> SIZE libAfterImage-1.18.tar.bz2 ... 1050328
==> PASV ...
Last edited by monstermudder78 (2008-12-21 23:25:38) -
N8 doesn't display message icon when locked
Hello
My Nokia N8 stopped displaying the message icon when the phone is locked after the recent Anna update and service pack. The button still flashes, but the icon is gone just like it used to be pre-Anna.Open control panel.
Choose Network and internet
Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
Choose wireless Network Connection or something similiar. If connected with ethernet then select it and press right button.
Click the properties button
Find Internet ''PROTOCOL VERSION 6(TCP/IPv6)'' anduncheck it, then click OK.
Click CLOSE
Restart your PC and try.
Reason For Problem
When u will use ipV6 , you have to setup your router and lan/wifi in ipv6 mode. Then bejour pass sound through ipv6 but when you use 2 mode ( ipv4 and ipv6 ) together benjour gets confuse some time it pass through in ipv6 and sometime ipv4 .if your router setup is ipv4 then, when banjour pass sound through ipv6 you will not see airplay button in itunes.
Hope it's clear to everyone .
Itunes -
Linux nxclient doesn't display any icons or fonts
Has anyone ever seen this problem?
Whenever my nxclient for linux connects to Win 2000 server RDP session, it shows no fonts or icons.
However, if the same linux nxclient connects to an X or VNC session it displays properly. If I am on my Win XP laptop, the windows nxclient displays properly. The linux rdesktop client also displays correctly when connecting directly to the windows 2000 server.
I have done mucho googling but I seem to be the only on with this problem.The problem is solved by upgrading an oracle client_1 to 11g version,
Apparently these are the files which have caused the problem in old version of the oracle client (10.2.0..):
SQL Developer is using client's libs by default when it's installed for ex.:
jdbc.driver.home /D:/oracle/product/10.2.0/client_1/
jdbc.library /D:/oracle/product/10.2.0/client_1/jdbc/lib/ojdbc5.jar
AND:
orai18n.library /D:/oracle/product/10.2.0/client_1/jlib/orai18n.jar
above libs are not compatible with the latest version of SQLDeveloper.
That's why the problem occurs.
Jim,
thanks for pointing me in the right direction. Cheers mate!! -
Konqueror doesn't display home icons using the breeze theme on plasma
I've tried the plasma desktop environment, and it's lovely. But as described in the title, I find that konqueror doesn't show icons for home folder if opened as a browser under the default breeze theme. The location for the desired icon is
file:///usr/share/icons/breeze/places/user-folders/user-home.svg
. And neither do the icons for Trash, Network Folders etc. But when changing the icons theme to oxygen, the problem disappears. I don't know how to solve this problem. Any help is appreciated.Did you try '''Ctrl'''+'''0''' (zero) to reset the zoom.
You did that with by holding the control key and scrolling on the right edit of the pad, which is equivalent to Ctrl+scrollwheel on the mouse.
Ctrl+0 to restore zoom to normal (Ctrl+- zooms out, Ctrl++ zooms in )
The problem with the Zoom toolbar buttons (+ and -) builtin to Firefox 4 is that there is no way to zoom directly to normal (100%) nor even tell what zoom level you are at.
For more control over zooming things see these [http://dmcritchie.mvps.org/firefox/firefox.htm#zoom zoom links]
To set the zoom permanently on a per site basis, try the [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint] extension, which optionally remembers on a per site basis. -
My iPad 4th gen does not show AirPlay icon can you help
IPad 4th generation is not displaying AirPlay icon that is supposed to be next to airdrop icon.
i Don't see any AirPlay settings available in settings,
i am running the latest software, what's going on Apple?SO what you are saying the AirPlay icon is not visible until you have an airplay device active to hook up to,
this seems quite a ridiculous logic most people wouldn't even know they have AirPlay and what it is as it doesn't pop up anywhere in settings or on screen, seems to be a poor marketing decision again by Apple. When I bought my $1000 device I expected to be able to wifi to printers direct and to mirror to other devices without all this mess.
are you saying something better ic coming around the corner? -
HT4437 I do not see an airplay icon in the music app on my mini iPad? Help please
I cannot find an Airplay icon in the Music app on my iPad mini... Suggestions please and thanks!
http://www.dummies.com/how-to/content/ipad-music-controls-the-airplay-icon.html
-
HT201335 Why AIRPLAY icon doesnot appear on my ipad or iphone 5???Please help .......
I want to connect Apple TV to my ipad..but no Airplay icon is found after home button is pressed twice.. How do I fix this problem & connect to apple tv...
ThanxIf you are not even seeing the airplay icon so,etching be blocking the connection. Check firewall and other security.
Also see
http://support.apple.com/kb/ts4215 -
Airplay icon missing in I OS 8
Why doesn't the AirPlay icon show up anymore in iOS 8? I swipe up the panel from the bottom and it isn't there anymore? Im using iOS 8.1.2
If you don't see the AirPlay icon in Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad and test AirPlay -
I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?
Try restarting your router as a first thing, this sometimes works for me.
Maybe you are looking for
-
How can I change my iCloud my e-mail-account
How can I change my iCloud my e-mail-account?
-
How do I change file names in "Windows Friendly" attachments before sending?
In sending some "Windows Friendly" attached images, I want to change the file names so they are meaningful to the recipient. (I don't want to change the file name in my picture catalog, just for this mailing.) In Outlook on an old pc, I remember bei
-
I downloaded the setup of Itunes but when I install it, he tells me the following error: "A problem occurred on this package Windows Installer. A script necessary so that this installation can finish could not be carried out."
-
Hi gurus, My client wants to capture costs of software maintenance by the computer number(system no.) which is in turn assigned to one particular cost center. Monthly transactions posted to GL a/c i.e computer maintenance. Wants to set up as a month
-
TS3297 Can't connect to the iTunes Store
what can i do?