IPSec and split tunneling

Hi,
One of my users need to work sometimes in second (not our) office and have access to printer. The problem is that the in the remote and local office there is the same network (10.0.0.0/24). VPN's policy distinguish network 10.0.0.0/24 that should go through the tunnel. The printer in the remote office has IP address 10.0.0.102. Is there any posibility to solve it ? I've tried with access-list:
access-list SPLIT_TUNNEL_LIST standard deny host 10.0.0.102
access-list SPLIT_TUNNEL_LIST standard permit 10.0.0.0 255.255.255.0
but it doesn't work
regards
Hubert

solved by NAT,
regards

Similar Messages

RA VPN on ASA and Split Tunneling

Hello Forum,
I'm having an issue with RA VPN and split tunneling. Our company doesn't allow split tunneling.
I have the following....
ASA 5520 - ASA Version - 8.0(3)
Group Policies defined for different groups. My test group, I thought I disabled split tunneling but they are still able to surf the net.
For Split Tunneling Policy...
Inherit is unchecked
I have "Tunnel Network List Below"
Testing_splitTunnelAcl is my acl. I have a bunch of host IPs in the list. I don't have any or 0.0.0.0 in the list.
But they can still surf the net.
I would like to block access to net. No hairpinning or internet u-turns.
How do I do this?
Any help greatly appreciated.
Regards,

What does your Testing_spliTunnelAcl have?
To disable split tunneling, your Testing_spliTunnelAcl should only have this...
access-list Testing_splitTunnelAcl standard permit any
...which means all traffic will be encrypted and will be sent to ASA no matter what. If you add any IP Address, only those traffic destined to the IP Address in the list will be encrypted and send to ASA, everything else will go to internet from the client.
It may be confusing but try and see what happens.

IP Phone SSL VPN and Split tunneling

Hi Team,
I went throught the following document which is very useful:
https://supportforums.cisco.com/docs/DOC-9124
The only things i'm not sure about split-tunneling point:
Group-policy must not be configured with split tunnel or split exclude. Only tunnel all is the supported tunneling policy
I could see many implementation when they used split-tunneling, like one of my customer:
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
banner value This system is only for Authorized users.
dns-server value 10.64.10.13 10.64.10.14
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value prod.mobily.lan
address-pools value SSLClientPool
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect ask none default anyconnect
username manager-max password XTEsn4mfYvPwC5af encrypted privilege 15
username manager-max attributes
vpn-group-policy GroupPolicy1
tunnel-group PhoneVPN type remote-access
tunnel-group PhoneVPN general-attributes
address-pool SSLClientPool
authentication-server-group AD
default-group-policy GroupPolicy1
tunnel-group PhoneVPN webvpn-attributes
group-url https://84.23.107.10 enable
ip local pool SSLClientPool 10.200.18.1-10.200.18.254 mask 255.255.254.0
access-list split-tunnel remark split-tunnel network list
access-list split-tunnel standard permit 10.0.0.0 255.0.0.0
It is working for them w/o any issue.
My question would be
- is the limitation about split-tunneling still valid? If yes, why it is not recommended?
Thanks!
Eva

Hi,
If you're not using certificates in client authentication then the SSL handshake will complete before the user is requested to authenticate with username/password. If this authentication request fails you will see the SSL session terminated immediately following this failure (as in the logs you provided). Notice the 5 seconds between the SSL session establishment and termination, this is most likely when the user is being authenticated against the aaa server. If the phone is failing authentication against an external aaa-server you'll want to investigate the logs on that server to determine the root cause of the failure. The ASA can also provide confirmation of the authentication request/reject with the command 'show aaa-server'. If you want to see what's going on at an authentication protocol level you can enable several debugs including "debug aaa authentication|common|internal' and protocol specific debugs such as 'debug radius user|session|all' or 'debug ldap'.
Did this answer your question? If so, please mark it Answered!

SonicWall Global VPN Client and Split tunneling

Hello All,
I searched Google and the forums here and can't find someone with the same problem.
Lets start at the beginning-Just started this job a couple months ago and people brought to my attention immediately an issue while they were on the VPN they could not get to the internet. I know about the different security risks but we have multiple field reps that need internet access while using our CRM program. So I setup Split Tunneling on the Sonicwall. Tested and works fine on my home PC using a WRT54GS Ver 2.1 and the SonicWall Global VPN Client.
So I was sure everything was fine until I just sent out 2 laptops to 2 different sales reps and they are both having the same issue. They can get into the internal network but can't access the internet. They are both on WRT54G (different Vers.). I tested the VPN client on both laptops with tethering on my cell phone and the split tunneling works. I have tried updating firmware thinking that was the issue. I also tried to put their home network on a different subnet. All with no joy. I was wondering if anyone ever ran into something like this or have any clues what to try next.
-Thank You in advance for your time.
Message Edited by Chris_F on 01-11-2010 07:41 AM
Chris F.
CCENT, CCNA, CCNA Sec

Of course, you do as you are told. But I hope you keep written record of what you have been told and have it signed of whoever told you to set it up. It's essential that you stay on the safe side in these matters.
I have read of too many cases where the system/security admin did not do so and in the end was held responsible for security incidents simply because he was told to do something to jeopardize security of the network. Remember, that usually the person who tells you do to so has no idea about the full security implication of a decision.
Thus, I highly recommend to require your road staff to connect with no split tunneling. Refuse to do otherwise unless you have it in writing and you won't be held reliable in any way if something happens because of it.
Just think what happens if the whole customer database gets stolen because of one of the remote sales reps... There is a reason why you apply this web site blocking on your firewalls and there is absolutely no reason that would justify why your remote sale reps don't go through the very same firewall while accessing company-sensitive data in your CRM.
So put that straight with whoever told you to do otherwise and if you they still want to continue anyway get it in writing. Once you ask for the statement in writing many decision-makers come to their senses and let you do your job at the best you can and for what you were hired... And if not, well, at least you got rid of the responsibility in that aspect.

SSL VPN Full and Split Tunnel Config Question

I am Beta testing SSLVPN on an IOS router. The question I have is this:
Is it possiable to have slit and full tunnel configs. It seems that once you create your context and default profile that is all you have either split or full. The books say you can use Radius and assign different profiles but, I would like to give the users a choice (like in the VPN3000 .pcf) of either split or full depending on where they are working from.

The below is an example using the ASA - but the principle remains the same:-
http://www.cisco.com/en/US/customer/products/ps6120/products_configuration_example09186a0080975e83.shtml
HTH>

AnyConnecy VPN and Split-tunnel ACL - Strange...

Hi,
I have ACL as follows and applied on AnyConnect VPN group as split-tunel value ACL.
access-list SPLIT-ACL extended permit tcp host 192.168.200.63 172.16.1.0 255.255.255.0 eq www
access-list SPLIT-ACL extended permit tcp host 192.168.200.63 172.16.1.0 255.255.255.0 eq https
When I connected with AnyConnect client, I can ping to 192.168.200.63 and also telnet to port 80. However I can not telnet to port 443. Strange thing is I do not see any hits on above ACL, morever I'm wondering how cam the ICMP is working and why it does not stop on this ACL..?
Phase: 4
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0x78e03140, priority=11, domain=permit, deny=true
        hits=113713, user_data=0x5, cs_id=0x0, use_real_addr, flags=0x0, protocol=0
        src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0
        dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0 dscp=0x0
        input_ifc=outside, output_ifc=any
When I did the packet-tracer both ICMP and http it just drop on Phase 4..as bellow, I just want to know what this ACL and where its been applied to..?
What is the correct syntax for packet-tracer command when troubleshooting AnyConnect VPN to check access inside/dmz server..?
I have used as follows:
packet-tracer input outside icmp 172.16.1.1 0 8 192.168.200.63 details
Appreciate if someone can help me out on this..
thanks

To start with it is not ideal to configure a port based split tunnel. It is not support and will give you weird results like one you are experiencing. You should use standard access-list for the split tunnel and to restrict the users to the following port use vpn filter.
As far as packet tracer is concerned for the VPN client if you use the outside interface as source it will never work the reason is the connection between the ASA and the client is of real IP address (Public) and the traffic that you are testing with is a VPN encrypted traffic your ASA's outside interface doesn't know what is 172.16.1.1, he will check it against the outside access-list and will drop it.
So in your case i would strongly recommed that use standard access-list for the split tunnel and to restrict the user to specific port use vpn filter. Following are the links to configure the same:
Allow Split Tunnel for Anyconnect:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080975e83.shtml
Configure VPN filter (Its for site to site and remote access but it works the same for Anyconnect):
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml
Thanks
Jeet Kumar

Issues with basic VPN setup and split tunneling

I have created an SSL VPN to a CISCO ASA 8.6 running ASDM 6.6.
Im able to connect to the VPN and reach all the devices with the LAN but Im not able to browse the web. When I enable the split tunnel Im able to browse the web but then Im not able to reach any internal device.
Here is part of the show run:
object network RedInterna
subnet 150.211.101.0 255.255.255.0
description Red Interna
object network NETWORK_OBJ_10.4.1.0_28
subnet 10.4.1.0 255.255.255.240
access-list inside_access_in extended permit ip object RedInterna any
access-list VPN_INTERNET standard permit 150.211.101.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
ip local pool VPN_POOL 10.4.1.1-10.4.1.14 mask 255.255.255.240
failover
failover lan unit secondary
failover lan interface fail-1 GigabitEthernet0/2
failover key *****
failover interface ip fail-1 10.3.1.21 255.255.255.252 standby 10.3.1.22
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-66114.bin
asdm history enable
arp timeout 14400
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.4.1.0_28 NETWORK_OBJ_10.4.1.0_28 no-proxy-arp route-lookup
nat (inside,outside) after-auto source dynamic any interface
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 187.217.68.145 1
route inside 10.0.0.0 255.0.0.0 10.1.1.78 1
route inside 150.211.0.0 255.255.0.0 10.1.1.78 1
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-3.1.00495-k9.pkg 1
anyconnect enable
tunnel-group-list enable
group-policy GroupPolicy_VPN_ internal
group-policy GroupPolicy_VPN_ attributes
wins-server none
dns-server value 8.8.8.8
vpn-tunnel-protocol ssl-client
default-domain value dominio.com.mx
tunnel-group VPN_ type remote-access
tunnel-group VPN_ general-attributes
address-pool VPN_POOL
default-group-policy GroupPolicy_VPN_
tunnel-group VPN_ webvpn-attributes
group-alias VPN_ enable
I´m not sure if Im missing some small details or setup. Any help will be highly appreciated.
Thanks!!!

Hi,
When you are using Full Tunnel VPN (which is the default setting) you will have a couple of things that you need to configure on the ASA.
First, the ASA by default won't allow traffic to enter through an interface and then leave through that same interface. This is what essentially happens when the traffic from the VPN Client comes to the ASA and then heads out to the Internet. In your case the traffic comes through the "outside" and leaves through the "outside" interface.
You will need this command
same-security-traffic permit intra-interface
You can check if its enabled at the moment with the command
show run same-security-traffic
Second, the VPN users will need to have NAT configuration just like any LAN users behind the actual ASA. So you will essentially have to configure Dynamic PAT for traffic from "outside" to "outside"
You can accomplish that with the following configuration
object network VPN-PAT
subnet 10.4.1.0 255.255.255.240
nat (outside,outside) dynamic interface
I would imagine that this should do it for you to be able to connect to the Internet and to the LAN network when the VPN is active.
Hope this helps
Let me know how it goes.
- Jouni

Cisco 3745, VPN and Split Tunneling

I tried following the model here: http://www.cisco.com/en/US/netsol/ns340/ns394/ns171/ns27/networking_solutions_white_paper09186a008018914d.shtml
but after doing so, the situation was actually reversed. While connected to the vpn client you were able to browse the internet but not able to access vpn resources. I undid and redid the configuration several times to rule out keying in problems.
Can one help with this problem... If needed Ill post necessary configs from my router.. Thanks
(btw: do these froms have a search?)

I am having the same problems with pix 501. With split tunnel, I get web but no lan access. Without split tunnel, full lan access, no web. My acl for the splitTunnel is:
permit ip host 192.168.1.0 any
Is this wrong?

RV220W, VPN client, and Full Tunnel vs Split Tunnel capabilities

For an RV220W, which VPN client mode (of the three possibilities) supports which Tunnel mode?
This is mostly a question, and partly "in use" observations.
Background: I have been able to get all three different VPN clients to work with an RV220W, but only one of the three works in "Full Tunnel" mode (SSL VPN). And since I know one of the three -- the Cisco QuickVPN client -- will never with in that mode, do we know if an RV220W will with an IPSec client in Full Tunnel Mode?
If anyone answers yes, the next question will be vpn client and how did you configure it, client and RV220W, to make full tunnel work.
Summary of VPN modes I've gotten to work with an RV220W:
Client
Split Tunnel Works?
Full Tunnel Works?
OS?
Notes
SSL VPN
Yes
Yes
Win7/64
IE10 or IE11
QuickVPN
Yes
No
Win7/64
IPSec VPN
Yes
No
Win7/64
Shrew Soft VPN Client

I have to mark this as not a correct answer.
Reason: 0.0.0.0 will not go into either of the fields listed above, message is "Invalid IP address Please enter a value between 1 - 223 at xxx.0.0.0.".
To Michal Bruncko who posted this:
1.) 0.0.0.0 will not work in my router nor in the RV220W online emulator here, (general emulator page here), am I missing something obvious?
2.) Have you used these actual settings on your router, or did you answer in a theoretical, "this should work" way?

Split Tunnel VPN and routing public ip traffic

Hi Everyone,
I have my split tunnel vpn working well but I need to make an adjustment. We have a few systems in the "cloud" and we only allow access from our corporate WAN IP to those servers. I need to be able to access those servers via VPN connection to the office. I added that public IP subnet to my interesting traffic and the vpn client is sending the traffic across the VPN as expected. The issue is that it somehow drops out inside the firewall it seems. Almost like it doesn't know how to route that request back out to the internet using it's own default gateway. Any thoughts as to what I may be missing, here is some of the relevant code
same-security-traffic permit intra-interface
----Interesting Traffic------
access-list vpnpool standard permit 10.1.1.0 255.255.255.0
access-list vpnpool standard permit 10.31.26.0 255.255.255.0
access-list vpnpool standard permit 10.31.61.0 255.255.255.0
access-list vpnpool standard permit 10.31.3.128 255.255.255.192
access-list vpnpool standard permit 10.31.40.128 255.255.255.240
access-list vpnpool standard permit 10.31.40.64 255.255.255.192
access-list vpnpool standard permit 50.57.0.0 255.255.0.0 -- Network of cloud servers
---Natting----------
global (outside) 1 71.174.57.78
global (dmz) 1 interface
nat (inside) 0 access-list 101
nat (inside) 1 10.1.1.0 255.255.255.0
nat (qa) 1 200.200.200.0 255.255.255.0
nat (dmz) 1 10.1.11.0 255.255.255.0
nat (dmz2) 1 192.168.1.0 255.255.255.0
---Rules and Gateway-------
access-group inbound in interface outside
access-group dmz in interface dmz
route outside 0.0.0.0 0.0.0.0 71.174.57.1 1
---VPN-----
group-policy xxx-remote internal
group-policy xxx-remote attributes
wins-server value 10.1.1.5
dns-server value 10.1.1.5 10.1.1.6
vpn-idle-timeout 60
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
ipsec-udp enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnpool
default-domain value xxx.local
split-dns value xxxx.local
service-type remote-access
tunnel-group xxx-vpn type remote-access
tunnel-group xxx-vpn general-attributes
address-pool vpnpool
authentication-server-group (outside) RADIUS
authentication-server-group (dmz) RADIUS
default-group-policy xxx-remote
tunnel-group xxx-vpn ipsec-attributes
pre-shared-key xxxxx

That was my mistake, I am mixing up code here. The fun of switching between new and old ASA code as well as routers
Let's do it this way, this should fix the problem. Put the NAT command the way it was as follows:
nat (Outside) 1 10.1.10.0 255.255.255.0
Now we add a NAT0 for the Outside interface. You can reuse the ACL we made if you want or make a new one, your call since you have to administrate it.
no access-list VPN-NAT
access-list VPN-NAT0 permit ip 10.1.10.0 255.255.255.0 10.0.0.0 255.0.0.0
nat (Outside) 0 access-list VPN-NAT0
Now, this should properly NAT the traffic going to the Internet while excluding the traffic destined for your 10.0.0.0/8 subnet using the Nat 0.
Sorry for the round about fix, but that should take care of it.

Help With split tunneling and multiple subnets behind asa

Hello All,
our vpn clients can no longer access internet while connected to vpn.
I was hoping I could get an answer on here for an issue we are having. let me explain this with as little words as possible.
here was old network layout:
ASA
192.168.1.1   ----> the rest of the internal subnet (was only subnet in network)
now
ASA                              3560
192.168.254.1/24 ----->192.168.254.2/24-->192.168.1.1/24
                                                               192.168.2.1/24
so what we did was route from 3560 to asa so we would be able to have multiple subnets since our asa has base license.
Our vpn with easy connect worked with our split tunneling before and now we made the change above and it no longer works. Can someone help me out as to why it no longer works and what changed need to be made to make it work.
Thank you.
ciscoasa# sh run
: Saved
ASA Version 8.2(2)
hostname ciscoasa
enable password 1N7bTm05RXLnBcUc encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.254.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address x.x.x.x 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
ftp mode passive
clock timezone est -5
same-security-traffic permit intra-interface
access-list NoNat extended permit ip any 172.16.5.0 255.255.255.0
access-list SplitTunnel standard permit 192.168.1.0 255.255.255.0
access-list SplitTunnel standard permit 192.168.2.0 255.255.255.0
access-list SplitTunnel standard permit 192.168.254.0 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPNPool 172.16.5.1-172.16.5.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list NoNat
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
route inside 192.168.1.0 255.255.255.0 192.168.254.2 1
route inside 192.168.2.0 255.255.255.0 192.168.254.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set TransformSet1 esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map DynamicMap1 1 set transform-set TransformSet1
crypto map MainMap 999 ipsec-isakmp dynamic DynamicMap1
crypto map MainMap interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 64.90.182.55 source outside
webvpn
enable outside
svc image disk0:/anyconnect-dart-win-2.5.0217-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy RenotreUsers internal
group-policy RemoteUsers internal
group-policy RemoteUsers attributes
vpn-tunnel-protocol svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SplitTunnel
tunnel-group RemoteUsers type remote-access
tunnel-group RemoteUsers general-attributes
address-pool VPNPool
default-group-policy RemoteUsers
tunnel-group RemoteUsers webvpn-attributes
group-alias Southeast-Security-VPN enable
tunnel-group RemoteUsers ipsec-attributes
pre-shared-key *****

I think it could be your NAT statement. You should try an avoid using any unless you tunnel everything. Try making this change
no access-list NoNat extended permit ip any 172.16.5.0 255.255.255.0
object-group network INTERNAL_NETWORKS
description Internal Networks
network-object 192.168.1.0 255.255.255.0
network-object 192.168.2.0 255.255.255.0
network-object 192.168.254.0 255.255.255.0
access-list NoNat extended permit ip object-group INTERNAL_NETWORKS 172.16.5.0 255.255.255.0
You may have to re-add your NAT0
nat (inside) 0 access-list NoNat

Cisco AnyConnect SSL VPN no split tunnel and no hairpinning internet access

Greetings,
I am looking to configure a Cisco ASA 5515X for Cisco AnyConnect Essentials SSL VPN where ALL SSL-VPN traffic is tunneled, no split tunneling or hairpinning on the outside interface. However users require internet access. I need to route traffic out the "trusted" or "inside" interface to another device that performs content-filtering and inspection which then egresses out to the internet from there. Typically this could be done using a route-map (which ASA's do not support) or with a VRF (again, not an option on the ASA). The default route points to the outside interface toward the internet.
Is there no other method to force all my SSL-VPN traffic out the inside interface toward LAN subnets as needed and have another default route point toward the filtering device?
OR
Am I forced to put the ASA behind the filtering device somehow?

Hi Jim,
You can use tunnel default route for vpn traffic:
ASA(config)# route inside 0.0.0.0 0.0.0.0 <inside hop> tunneled
configure mode commands/options:
<1-255> Distance metric for this route, default is 1
track Install route depending on tracked item
tunneled Enable the default tunnel gateway option, metric is set to 255
This route is applicable for only vpn traffic.
HTH,
Shetty

Is it possible configurate split-tunnel at l2tp over ipsec vpn at asa

Dear i want to know is it possibly to configurate split-tunnel at l2tp over ipsec vpn at asa???
thanks.

please help me.

Overlapping Networks with Tunnel GRE/IPsec and NAT

Has anyone experience with NATing on a GRE tunnel interface? I need to NAT between two private networks because they are overlapping. I tried to NAT directly on the tunnel interface.
e.g.
Ethernet 0/0
ip nat inside
Tunnel0 (GRE with CryptoMap)
ip nat outside
However I didn't succeed this way. What's the best way to achive my goal?

Thanks. I already checked this paper. The problem is that it only talks about IPsec and not about GRE/Ipsec and nating on a Tunnel interface.
However I made some tests in the lab and it worked fine. So I went back to the customer-site and I had to reboot the small 836 to get it working.
What I learnedis : "ip nat outside" on a tunnel interface on a Cisco 836 is no problem. This is good news if you have to add partners companies with GRE/IPsec and they don't have IP ranges you like, so you just NAT them and give them IP addresses of your choice.

EZVPN public internet split tunnel with dialer interface

I have a job on where I need to be able to use EZVPN with split tunnel but still have access to an external server from the corporate network as the external server will only accept connections from the corporate public IP address.
So I have not only included the corporate C class in the interesting traffic but also the IP address of the external server.
So all good so far, traffic for the corporate network goes down the tunnel as well as the IP address for the external server.
Now comes the problem, I am trying to send the public IP traffic for the external server out of the corporate network into the public internet but it just drops and does not get back out the same interface into the internet.
I checked out this procedure and it did not help as the route map counters do not increase with my attempt to reach the external router.
http://www.cisco.com/c/en/us/support/docs/security/vpn-client/71461-router-vpnclient-pi-stick.html
And to just test the process, I removed the split tunnel and just have everything going down the tunnel so I can test with any web site. I also have a home server on the network that is reached so I can definitly reach into the network at home which is the test for the corporate network I am trying to reach.
Its a cisco 870 router and here is the config
Router#sh run
Building configuration...
Current configuration : 4617 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
logging message-counter syslog
enable secret 5 *************************
enable password *************************
aaa new-model
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 192.168.1.2
ip dhcp excluded-address 192.168.1.3
ip dhcp excluded-address 192.168.1.4
ip dhcp excluded-address 192.168.1.5
ip dhcp excluded-address 192.168.1.6
ip dhcp excluded-address 192.168.1.7
ip dhcp excluded-address 192.168.1.8
ip dhcp excluded-address 192.168.1.9
ip dhcp excluded-address 192.168.1.111
ip dhcp pool myDhcp
network 192.168.1.0 255.255.255.0
dns-server 139.130.4.4
default-router 192.168.1.1
ip cef
ip inspect name myfw http
ip inspect name myfw https
ip inspect name myfw pop3
ip inspect name myfw esmtp
ip inspect name myfw imap
ip inspect name myfw ssh
ip inspect name myfw dns
ip inspect name myfw ftp
ip inspect name myfw icmp
ip inspect name myfw h323
ip inspect name myfw udp
ip inspect name myfw realaudio
ip inspect name myfw tftp
ip inspect name myfw vdolive
ip inspect name myfw streamworks
ip inspect name myfw rcmd
ip inspect name myfw isakmp
ip inspect name myfw tcp
ip name-server 139.130.4.4
username ************************* privilege 15 password 0 *************************
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group HomeFull
key *************************
dns 8.8.8.8 8.8.8.4
pool SDM_POOL_1
include-local-lan
netmask 255.255.255.0
crypto isakmp profile ciscocp-ike-profile-1
match identity group HomeFull
client authentication list ciscocp_vpn_xauth_ml_1
isakmp authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-template 3
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set security-association idle-time 1740
set transform-set ESP-3DES-SHA
set isakmp-profile ciscocp-ike-profile-1
crypto ctcp port 10000
archive
log config
hidekeys
interface Loopback10
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description TimsInternet
ip flow ingress
ip policy route-map VPN-Client
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 3
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Virtual-Template3 type tunnel
ip unnumbered Dialer3
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Vlan1
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip inspect myfw in
ip nat inside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
ip tcp adjust-mss 1372
no ip mroute-cache
hold-queue 100 out
interface Dialer0
no ip address
interface Dialer3
ip address negotiated
ip access-group blockall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp header-compression
ip policy route-map VPN-Client
no ip mroute-cache
dialer pool 3
dialer-group 1
no cdp enable
ppp chap hostname *************************@direct.telstra.net
ppp chap password 0 *************************
ip local pool SDM_POOL_1 10.0.0.10 10.0.0.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer3
ip http server
ip http authentication local
no ip http secure-server
ip nat inside source list 101 interface Dialer3 overload
ip access-list extended VPN-OUT
permit ip 10.0.0.0 0.0.0.255 any
ip access-list extended blockall
remark CCP_ACL Category=17
permit udp any any eq non500-isakmp
permit udp any any eq isakmp
permit esp any any
permit ahp any any
permit tcp any any eq 10000
deny ip any any
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
access-list 101 permit ip 10.0.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
route-map VPN-Client permit 10
match ip address VPN-OUT
set ip next-hop 10.0.0.2
control-plane
line con 0
no modem enable
line aux 0
line vty 0 4
password cisco
scheduler max-task-time 5000
end
Router#exit
Connection closed by foreign host.

Thanks for the response.
Not sure how that would help as I can connect into the internal network just fine, but I want to hairpin back out the interface and surf the internet from the VPN client. The policy route map makes the L10 the next hop and it has NAT.

IPSec and split tunneling

Similar Messages

Maybe you are looking for