IR: ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier

Hi everyone,
has anyone else had this error which has been driving me round the bend during the last three days?
I have an interactive report which used to work fine.
Now it happens (when the page loads/a filter is en- or disabled) that - from time to time, but unpredictable - I receive
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
The report is based on a table function.
I will try to set up a testcase and post the link here, but so far I haven't managed to force the error to occur.
But maybe someone else has already bumped into this kind of error? I would be grateful for any hints!
Best regards,
Sabine
Application Express 4.1.0.00.32
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production

Hi Jari,
I changed the type definition (the return type of the table function) and extended the select list in the source of the IR.
I do not use 'select *' but reference every column explicitly. So APEX easked me whether to add the new column.
I also tried deleting in recreating the region, but no luck.
Any more ideas?
Best regards,
Sabine

Similar Messages

IR Report Search - ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression

Hi All,
I had created a IR report based on a table and it was working with no issues. But after few days, when I try searching using the IR search bar it shows "ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression" error message. I don't see any debug messages or errors in the debug window. The Finder drop down is empty too, there are no columns displayed to filter.
When I recreate the IR report(new page) based on the same table, It works fine and there are no issues with the search. But the old IR report search doesnt work. I have not modified the any thing in the old report after initial creation. Report uses Primary key based on a sequence.
What might have caused this issue?
Is there a way to intercept the search query from IR report?
Apex version - 4.2.3.00.08.
Any help on this appreciated.
Thanks,
Jagan

Hi MK, as I had mentioned in my post, I don't see any logs in the debug window, query tab.
Can you please guide me how to check the query logs on search?
Thanks,
Jagan

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Solved: ORA-20001: get_dbms_sql_cursor error ORA-01445: cannot select ROWID

I got an error, googled it and couldn't find a good answer. Joe Fuda helped me to fix the problem. Here is the answer for future google results.
Error:
ORA-20001: get_dbms_sql_cursor error ORA-01445: cannot select ROWID from, or sample, a join view without a key-preserved table
Query that triggered the error:
SELECT
p.rowid
, p.product_id
, p.product_type
, p.product_name
, p.product_description
FROM
product p
, link_release_product rp
WHERE
rp.release_id = 1
AND
p.product_id = rp.product_id
This is casued by the keyword "rowid".
The same error occurs if 'p.rowid' is replaced with 'p."ROWID"'.
You can replicate this error in SQL Command by adding wrapping the query with 'select * from ( [the query] )'
Fix:
Add an alias to 'p.rowid' so the query is now like:
SELECT
p.rowid product_rowid
, p.product_id
, p.product_type
Reason:
Unclear, it might have something to do with how APEX does pagination.

ok, found the answer... it has to do with the single row view issue addressed in this thread... ORA-01446 on Interactive query
(sorry if there's a better way to link to other threads in this forum).

ORA-20001: get_dbms_sql_cursor

I am getting this error in an interactive report, the same query returns result in the sql workshop but not in the report. The query uses a dblink to access data in another database.
The error I get is ORA-20001: get_dbms_sql_cursor error ORA-01747: invalid user.table.column, table.column, or column specification. I tried searching in this forum, but of no use.
My Application Express 4.0.0.00.46 is running on oracle XE on windows XP machine. Can somebody help me understand this issue.

Hi,
SQLWorkshop uses the ANONYMOUS user to access the DB. When using application the Default Parsing schema credentials are used to access the DB/DBlinks.
Most probably your Application Workspace Default Schema does not have access to the DB Link.
Does the query run in a Classic report? Or from SQLPlus when you are connected as the Dfault Schema Owner of the Workspace where your application resides?
Regards,

Scheduled Map Error: ORA-20001: Internal error ...

I have a scheduled map that is failing daily - the full error message is below. The map is for a cube. The map validates, deploys and runs SUCCESSFULLY when started from the OWB control center.
The schedule is simple: once a day @ 0600.
The Map is configured: Row Based (Target Only), No Ansi, No Optimization, No Target Load Order, Table Analzye, 500 Bulk Load, 500 commit.
The run time environment consists of: Windows Server 2003 SP1 x64, Oracle 10G x64 patched to the latest revision.
Any ideas appreciated.
Error from from Enterprize Manager 10g for the scheduled job:
ORA-20001: ORA-20001: Begin. initialize complete. l_job_audit_execution_id= 3261. execute_task complete. l_audit_execution_id= 7194. l_stream_id= 11434. ORA-20001: Internal error ORA-20001: Execution completed with 0 error(s) and 1 warning(s). ORA-06512: at "D2D_REPO_OWNER.WB_RTI_WORKFLOW_UTIL", line 769 ORA-20001: Execution completed with 0 error(s) and 1 warning(s). ORA-06512: at "D2D_WH.PGRN_WARE_MEASUREMENT_MP_JOB", line 113 ORA-20001: Internal error ORA-20001: Execution completed with 0 error(s) and 1 warning(s). ORA-06512: at "D2D_REPO_OWNER.WB_RTI_WORKFLOW_UTIL", line 769 ORA-20001: Execution completed with 0 error(s) and 1 warning(s).

OWB Control Center reports the error for the daily runs as below.
I've seen this before - when the map is configured for set based fail over to row base. The deeper meaning appears to be duplicate data in the source.
The Job details (Input Parameters) confirm that this job is running with a configuration that differs from what I've configured in the Repository - therefore I need to redeploy the map. I know I did this yesterday but somehow its wrong!
ORA-30926: unable to get a stable set of rows in the source tables

Why do I get a "DATE1 : ORA-00904 Invalid identifier" error ?

Hi,
Despite my efforts, I can't see why I get a "DATE1 : ORA-00904 Invalid identifier' error whith this request.
{code}With S1 as (
SELECT TRUNC(DATE1, 'MM'),
ROUND(SUM(VALEUR), 2)
FROM EVV_E036
GROUP BY TRUNC(DATE1, 'MM')
ORDER BY TRUNC(DATE1, 'MM'))
SELECT n,
NVL(ROUND(SUM(Valeur),2), 0)
FROM (select add_months(to_date('01/01/2006', 'dd/mm/yyyy'), level - 1) n FROM dual connect by level <= 12) months
LEFT JOIN S1
ON months.n = TRUNC(DATE1, 'MM')
GROUP BY n
ORDER BY n{code}
The line in error is this one : {code}ON months.n = TRUNC(DATE1, 'MM'){code}
Any idea much appreciated !
Regards,
Christian

hi,
I have done this and get no more errors. Now I see that the values I get are equal to 0. Or, I do get values different from 0 in my table ! I can't see why the left join gives 0. I have to dig this and come back tomorrow.
With S1 as (
SELECT TRUNC(DATE1, 'MM') Date1,
       ROUND(SUM(VALEUR), 2) Debit
FROM   EVV_E036
WHERE CLEF_VAR = (SELECT CLEF_VAR FROM SITE_ECHELLE WHERE SITE = 'E036')
AND    DATE1 BETWEEN TO_DATE ('01/01/2007000000', 'DD/MM/YYYYHH24MISS') AND TO_DATE ('31/12/2007235959', 'DD/MM/YYYYHH24MISS')
GROUP BY TRUNC(DATE1, 'MM')
ORDER BY TRUNC(DATE1, 'MM'))
SELECT n,
       NVL(ROUND(SUM(Debit),2), 0)
FROM   (select add_months(to_date('01/01/2006', 'dd/mm/yyyy'), level - 1) n FROM dual connect by level <= 12) months
LEFT JOIN S1
     ON months.n = date1
GROUP BY n
ORDER BY n

Discoverer report :ORA -00904 Invalid Identifier

Hi ,
we are using an apps mode EUL (version4i) ,
in the business area "Account Receivables"--->Customer Transaction Lines Folder,
when we pull up any item from this folder to create a report, it shows a
"ORA-00904 Invalid Identifier " error
how to fix it , whether the Item might be Deleted in view definition of this folder,
just a refresh of the folder is enough ?
thanks in advance

Hi,
Refreshing the folder should be your first step.
Rod West

Internal SYS_OP_ATG function generates "ORA-00904: : invalid identifier"

After gathering system statistics a MERGE statement within a PLSQL block now always raises "ORA-00904: : invalid identifier". Investigation points to internal SQL executed by the CBO using the SYS_OP_ATG function to be the culprit. What is this function and why does it raise "ORA-00904: : invalid identifier"? As a temporary solution deleting system statistics has made the problem disappear. My concern is that it will reappear.
Merge statement is within a procedure within a package. Nothing had been re-compiled. System statistics were gathered then the following statement errors every time. There is an exception handler around it which raises the "ORA-00904: : invalid identifier". Delete system stats and it all works fine again:
MERGE INTO lp_data lp
USING (
SELECT
f.ubimsg_id ubimsg_id,
f.endpoint_id endpoint_id,
f.msg_created_date msg_created_date,
t.end_time end_time,
DECODE(t.units_used,255,0, t.units_used) units_used,
DECODE(t.units_used,255,'N', 'Y') reading_received
FROM TABLE (CAST (tab_lp_values AS load_profiles)) t,
(SELECT ubirec.ubimsg_id ubimsg_id ,ubirec.endpoint_id endpoint_id, ubirec.msg_created_date msg_created_date FROM dual) f
) lp_rec
on (lp.endpoint_id = lp_rec.endpoint_id
and lp.end_time = lp_rec.end_time)
when matched then
update set lp.entry_date = lp_rec.msg_created_date,
lp.ubimsg_id = lp_rec.ubimsg_id,
lp.units_used = lp_rec.units_used / 10,
lp.reading_received = lp_rec.reading_received
when not matched then
insert (lp.endpoint_id,
lp.end_time,
lp.entry_date,
lp.ubimsg_id,
lp.units_used,
lp.reading_received)
values (lp_rec.endpoint_id,
lp_rec.end_time,
lp_rec.msg_created_date,
lp_rec.ubimsg_id,
lp_rec.units_used / 10,
lp_rec.reading_received );
The line FROM TABLE (CAST (tab_lp_values AS load_profiles)) t casts a plsql object collection. An SQL trace showed the following SQL which must be internal SQL generated for the MERGE statement.
SELECT distinct TBL$OR$IDX$PART$NUM("LP_DATA", 0, 1, 0, "END_TIME") FROM
(SELECT "LP_REC"."END_TIME" "END_TIME" FROM (SELECT :B1 "UBIMSG_ID",:B2 "ENDPOINT_ID",:B3 "MSG_CREATED_DATE",
SYS_OP_ATG(VALUE(KOKBF$),1,2,2) "END_TIME",
DECODE(SYS_OP_ATG(VALUE(KOKBF$),2,3,2),255,0,SYS_OP_ATG(VALUE(KOKBF$),2,3,2)) "UNITS_USED",
DECODE(SYS_OP_ATG(VALUE(KOKBF$),2,3,2),255,'N','Y') "READING_RECEIVED"
FROM TABLE(CAST(:B4 AS "LOAD_PROFILES") ) "KOKBF$","SYS"."DUAL" "DUAL") "LP_REC") ORDER BY 1
Without system statistics the trace did not have this statement in it, and the explain plan for the MERGE differed.
Oracle 11.1.0.7.0 Windows 32-BIT.
select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
SQL> show parameter compatible
compatible string 11.1.0.0.0
Any help to explain / resolve this issue would be much appreciated.

Duplicate thread: CBO on 11G generates ORA-00904 with SYS_OP_ATG

Advanced Conditions causing ORA-00904 invalid identifier

I have another weird thing going on...
It may be the complexity of the data I'm pulling, but I'm going to simplify the problem first...
I have several conditions in my workbook that I need to be true regardless then I need the following (this is a payroll thing):
((Total Regular Hours > 40 AND Total Overtime = 0) OR (Total Overtime > 0 AND (Total Regular Hours - Total Overtime Hours) <> 40))
So, I'm using Discoverer Plus 10g and if I create separate conditions for Total Overtime > 0 and (Total Regular Hours - Total Overtime Hours) <> 40) it will work, but if I try to combine them into one condition (so I can then add my OR and the other 2 conditions) it gives me the "ORA-00904 invalid identifier" error and will not run.
The only way I've been able to do it is to create 3 conditions and 2 worksheets. That way, I can add (Total Regular Hours > 40 AND Total Overtime = 0) in one condition and apply it to one sheet; then I the other 2 separate conditions can be applied to the other worksheet.
I hate having to have 2 worksheets when I should be able to create an advanced condition... anyone have any ideas?
Regards,
Emily

It is actually a typo in the message because I have a calculated column that calculates the difference... sorry.
I did try the idea of running the SQL that was generated in SQL Developer and it doesn't look right.
It did all my other conditions under the where, but then where I would have thought it should do another and it did a WHERE.... see below. (I only pasted from the from statement on to save room)
FROM HRBG_PEOPLE_ASSIGNMENT o393615, APPS.PTEN_PAY_BEE_V o393616
WHERE ( (o393616.ASSIGNMENT_ID = o393615.ASSIGNMENT_ID))
AND (o393615.BG_SECURITY_FLAG_CODE = 'Y')
AND (o393616.DATE_EARNED BETWEEN o393615.ASSIGNMENT_START_DATE AND o393615.ASSIGNMENT_END_DATE AND o393616.DATE_EARNED BETWEEN o393615.RECORD_START_DATE AND o393615.RECORD_END_DATE)
AND (o393616.DATE_EARNED IN (:"Date Earned Dates"))
AND (o393616.EFFECTIVE_DATE = :"Period End Date")))))
WHERE ( ( NP100 ) > 40 AND ( NP101 ) = 0)
AND ( ( NP104 ) <> 40 AND ( NP105 ) > 0)
ORDER BY E393849 ASC ;
Do you see the WHERE that I marked in BOLD? That should be an AND...
I even tried creating one crazy long condition to include everything in one and still got the same error and it produced the same SQL. I am thinking it has to do with the fact that I'm actually showing group totals for Regular Hours and Overtime and then subtracting them to get the difference. It all breaks when I add that difference in with the others. If I keep it separate, it does fine.
By the way, the error I get when running just the SQL is "not all variables bound"
Thanks,
Emily

Import failing with ORA-20001: GET_BLOCK Error

Hi All,
I'm attempting to install an export of our Application into the LIVE environment (something I've done many times before), and it's failing with the following error message: -
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 698, column 1: PLS-00103: Encountered the symbol &quot;,'#DD#','#EE#');&quot; when expecting one of the following: ) , * &amp; = - + &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;= &lt;&gt; and or like LIKE2_ LIKE4_
The only part of the message that makes any sense to me is the '#DD#','#EE#' which looks like part of a Javascript Passback Function from one of the pages.
Can anyone throw any light on why I'm getting this error message?
Thanks,
Mike

Scott,
I managed to track down the error. A column link URL I'm using calls a Javascript Passback Function as follows: -
javascript:passBack('#A#','#B#','#C#','#D#','#E#','#F#','#G#','#H#','#I#','#J#','#K#','#L#','#M#','#N#','#O#','#P#','#Q#','#R#','#S#','#T#','#U#','#W#','#X#','#Y#','#Z#','#AA#','#BB#','#CC#','#DD#','#EE#');
By reducing the length of this the import now works. The confusing part is that this was working previously.
Cheers,
Mike

Import Error ORA-20001:GET_BLOCK Error

We are trying to upgrade from HTML DB version 1.4 to 1.6, and we have encountered some issues with one of our applications. I tried to import our app using the Create Application->Based on an Application Export File option, specifying we would like to reuse the application id inside the export file, and also specifying the app to be a Run/Build Application. During the installation, I received this error:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (FLOWS_010600.WWV_FLOW_FLOW_PK) violated <pre>begin wwv_flow_api.create_flow( p_id =>122, p_display_id=>122, p_owner => 'TESTMGR', p_name => 'TEST', p_alias => '122', p_page_view_logging => 'YES', p_default_page_template=> 40824759845482865 + wwv_flow_api.g_id_offset, p_printer_friendly_template=> 40824564374
Keep in mind, when I received this error, no apps were present on our test server or in any of our workspaces. Even after receiving this error, I was able to see the application in my workspace, and run through some of the pages and they appeared to be running okay(app contains 101 pages).
I wanted to check to see if anyone knew what this error meant, so I don't spend hours upon hours testing something that isn't broken in the first place.
Here's what else I noticed:
I tried to reinstall the application over itself to see if I could recreate the error, but it installed fine.
I deleted the app, installed the app telling HTML DB to reuse the app_id in the export file, and received the error again.
But then I deleted the app altogether to try a different approach. I allowed HTML DB to auto assign the app_id and the app installed fine.
What is even more strange, I imported and installed one of our smaller apps (only 14 pages, by telling HTML DB to reuse the application id present in the export file). That application installed perfectly without a hitch.
So I guess my questions are:
What does that error mean? Is it detremental to the usage of an app?
Why do I only get the error with one application and not with another when I tell HTML DB to reuse the application id inside the export file?
By the way,
Export file sizes:
Large App w/ error - 4.90MB
Small App w/o error - 272KB
Thank you for your help in advance!!!

Thanks in Advance
I am facing same issue of Primary key voilation. This error comes even when the application is imported first time.
Other applications are importng file
Details of error are as fallows
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (FLOWS_010500.WWV_FLOW_FLOW_PK) violated
1852::begin
wwv_flow_api.create_flow(
p_id =>604,
p_display_id=>604,
p_owner => 'HMSIPD',
p_name => 'IPD',
p_alias => '604',
p_page_view_logging => 'YES',
p_default_page_template=> 210607950065627880 + wwv_flow_api.g_id_offset,
p_printer_friendly_template=> 210607443998627880 + wwv_flow_api.g_id_offset,
p_default_region_temp
Size of application is : 5 MB
Regards,
Ankur Diwan

ORA-20001 GET_BLOCK-ERROR during the installation of an application

hi people,
I' ve got the following error during the installation of an application in apex 2.2.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
Can anybody help me?
Message was edited by:
user512746

hi,
db-version is oracle 10g r2
os windows server 2003
the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
Message was edited by:
user512746
Message was edited by:
user512746

Copy Application - ORA-20001: GET_BLOCK Error. ORA-20001:

Hi
I am unable to make a copy of one of my apex applications, I get the error
ORA-20001: GET_BLOCK Error. ORA-20001:
Does anyone know how i can resolve this?
Thanks in advance

jk_apex_newby wrote:
hi eric.
i m getting same error. my development and reproduction specifications are as followsActually, if you read the OPs second message, you'll discover that it isn't entirely the same:
>
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters=''.,'''; end; </pre>versus:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.
ORA-06550: line 13, column 50: PLS-00103: Encountered the symbol &quot;end-of-file&quot;
when expecting one of the following: &lt;an identifier&gt; &lt;a double-quoted delimited-identifier&gt;
current delete exists prior <pre>declare h varchar2(32767) := null;
begin wwv_flow_api.create_page_item( p_id=&gt;3689529102880585 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_fAs such I would highly recommend creating a brand new post and perhaps include a reference to this thread - you will likely get more help more quickly if you do...
JC: I see that you have already posted a 2nd thread. Never mind...
Edited by: Joel_C on 01-Nov-2011 14:30

ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuc

Hi All,
I have exported a application and after that imported and tried to install it then i am getting this error:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 5, column 1: PLS-00306: wrong number or types of arguments in call to 'CREATE_REPORT_COLUMNS' ORA-06550: line 5, column 1: PL/SQL: Statement ignored <pre>declare s varchar2(32767) := null; begin s := null; wwv_flow_api.create_report_columns ( p_id=> 29524721731534348 + wwv_flow_api.g_id_offset, p_region_id=> 29524015959534345 + wwv_flow_api.g_id_offset, p_flow_id=> wwv_fl
History which happen:
everything was working fine in my workspace but 2 days back one of team member created customer demo application in the same work space so login was also failing and after struggling oneday i got that my authentication function was get overwritten by the demo user authentication so again i chaned by my bakup function now authentication is working but when i export my new developed application and tried to replace the existing application then i am getting the erroe which i have mention before.
1: I tried to replace by existing one
2: i tried to assign new application id
nothing is working so is it problem occues due to new demo application creation which i have deleted or other problem if other then how to solve if by demo then what i need to do .
But all applications are working well not able to install which i need to do with new developed application.
Please help me i am in tough situation.
Thanks in advance,
Amit

Amit,
The next useful test would be to run the file in SQL*Plus, connected as the application parsing schema. If it works, you will have imported the application. After that, please send me the file ([email protected]) and I'll figure out where the trouble is. If it fails in SQL*Plus, try to isolate the failing block. You'll get a pretty good idea by the prompts echoed to the output indicating the import progress.
Scott

IR: ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier

Similar Messages

Maybe you are looking for