Is CS6 the last version able to install on a non-Internet-connected network?

I work on a govt network, which has no connection to the Internet, so we just purchased Photoshop CS6.  Of course, we're having all sorts of problems because the damn application requires an Internet connection before it will run.  We're working with Adobe to try to find a way around this, but it's extremely frustrating.  I'm guessing we'll eventually be able to get an installer that doesn't try to connect to the Internet.
My question is:  Assuming we can get PS CS6 functioning, is that the last version Adobe will build that will be installable on a non-Internet-connected network?  That seems a bit short-sighted and will eventually cause the govt to remove all Adobe products from use.  I can't imagine that's a scenario Adobe would be happy with, but maybe they don't care.
Thoughts?  Does anybody else use Adobe products on a network that has no way to connect to the Internet?  Have you found good workarounds for working with these annoying apps?

Thanks, John.  I knew that, but have no way of registering or activating after install.  I know that an installer can be built with the Serial Number built in that doesn't require an Internet connection, but I've never been able to get that to work.  It takes half a day just to get the transfer approved to move it to the correct network, and after doing this six times, I've run out of patience.  I'm not really sure what to do at this point.  After over six hours on the phone with Adobe support, I've come to a brick wall.  Adobe products are no longer viable on government networks.  I'm surprised they've given up this large pool of users...

Similar Messages

  • How to install Mavericks onto non-internet connected iMacs

    I have a small network of imacs that I need to upgrade to Mavericks. I have mavericks installed on the admin computer. How do I get it onto all the other machines, which are not connected to the internet ?

    Your best method is to make an installer disk onto an 8 GB USB disk. You need to have the Installer app downloaded from the App Store.
    There are lots of web pages devoted to the instructions, but in essence, you need to run the following command:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    The createinstallmedia command is inside the Mavericks installer app; the untitled volume is the USB disk.
    You'll need to download the installer again if you've already run it, as installed Mavericks deletes the installer app. If you keep the app on an external disk, it wont get deleted, and will get updated if you download a newer version at a later date! You will of course have to change the filepaths in the command above if you move it.

  • I downloaded the last version of Flash Player this morning (in Europe) but when I start the Install Adobe Player.app it crashes every time !

    I downloaded the last version of Flash Player this morning (in Europe) but when I start the Install Adobe Player.app it crashes every time (I already unsinstalled the last Flash version and re-installed the new version many times but it doesn't work) and I always get this message (it's a summary because the real one is very very long - if you want the long version to help me with all the " facts ", just ask - thanks in advance " :
    Process:         Install Adobe Flash Player [1292]
    Path:            /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
    Identifier:      com.solidstatenetworks.awkhost
    Version:         3.3.6.0 (3.3.6.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [206]
    User ID:         501
    Date/Time:       2013-02-08 15:28:46.957 +0100
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  10
    Interval Since Last Report:          2909 sec
    Crashes Since Last Report:           10
    Per-App Interval Since Last Report:  15 sec
    Per-App Crashes Since Last Report:   3
    Anonymous UUID:                      9F1AAA7D-58CF-CECE-AA15-31385DEBF4E2
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    VM Regions Near 0:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
        __TEXT                 0000000000001000-0000000000050000 [  316K] r-x/rwx SM=COW  /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
    Model: MacBookPro6,1, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020 "

    I went on the Adobe website and I found this which helped me completely (thank to you Kaolay001) :
    17.
    Kaolay001
    8 feb. 2013 07:20   in reply to Hmalina
    http://forums.adobe.com/message-abuse!input.jspa?objectID=5057993&objectType=2
    Report
    How i solved:
    1 Mount the Flash Player installer .dmg file
    2 Copy the "Install Adobe Flash Player" file to desktop or any other directory as preferred
    3 Open terminal and cd to desktop or the other directory
    4 Run the following command on terminal: sudo ./Install\ Adobe\ Flash\ Player.app/Contents/MacOS/Install\ Adobe\ Flash\ Player
    5 Insert the password when asked

  • How can I re-install the last version of iPhoto, I hate this new version.

    How can I re-install the last version of iPhoto. I hate this new version "Photos 1.0" which installed yesterday on my iMac. Please help. My operating system is OS X YOSEMITE 10.10.3. THANKS.

    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

    I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

    Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
    Do the SFC /SCANNOW again.
    If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com.  Install, update virus definition then perform a full scan.  Remove if it did find some viruses or trojans.  Restart computer.
    Back to regular windows, do the SFC /SCANNOW again.
    If that doesnot work, check to see if your Hard drive has errors or bad sectors
    GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
    Choose "Tools" tab and under error checking, click "Check Now".
    Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
    Restart windows will perform the above task to fix errors  This may take hours depends on how big is your Hard Drive
    Good Luck!!.

  • HT4792 So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version i

    So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version installed with all the updates... Any ideas, thoughts?
    Thanks

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • HT1349 hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

    hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

    Hi,just now i open it with finder and it started downloading!!!
      Thank you,very new to mac:)

  • I Am not able to download the last version of iTunes.. Can you help please?

    I Am not able to download the last version of iTunes.. Can you help please?

    Hello,
    I recommend you download it from the Apple Website: www.apple.com/itunes
    Thank you for using Apple Support Communities.
    All the best,
    James

  • Why i can't instal the last version of itunes in my pc???

    why i can't instal the last version of itunes in my pc???

    How could we possibly know or begin to offer solutions based on that complete lack of detail?
    What happens when you try?

  • The last upgrade, I guess, installed the cloud, which I don't use, an album I hate [U2] and most of all got rid of 2/3 of my music and all my audiobooks! how can I get rid of this junk and get my old version and all my stuff back? I am so angry;

    The last upgrade, I guess, installed the cloud, which I don't use, an album I hate [U2] and most of all got rid of 2/3 of my music and all my audiobooks! how can I get rid of this junk and get my old version and all my stuff back?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • Firefox ESR 10.0.12 disables flash plugin - updates to the last version do not work?

    Suddenly - without any actions by me - FF ESR 10.0.12 refuses to accept Adobe Flash? (System Win 7 64 Ultimate)
    It started with a very annoying bar, which cost me 2 hours to deactivate, which told me to update an very old and unused Adobe Reader plugin. Then it insisted, that the Foxit PDF reader plugin was not up to date. Since I do not use it, I deactivated it too. Since I seldom use Flash, I just found out today, that youtube does not work anymore - FF insists, that my flash plugin is too old and it deactivated it.
    This has cost me hours up to now and it is _exactly_ the reason why I use the ESR channel.
    What I did:
    Deinstalled Adobe Flash completely (using Windows). Used the normal Firefox update, which it recommends (your flash player was deactivated, please install...). No success, it simply goes into a loop, always telling me my flash player is too old.
    I also installed it directly from Adobe (the Firefox version!!), in all cases it reports version 11.5.502.104. The last version from Adobe - but it seems to be too old???
    I am spitting angry now - this kind of trouble is the reason I only use ESR versions from Mozilla. I do not want your chaos troupe to play around with _my_ installation. But obviously you found ways to do so.
    If this is not solved (and no, I will _not_ reinstall Firefox, I will _not_ delete my profile) in a few days, Firefox is dead for me. I am already looking to Chrome and Opera. Many friends have these browsers - I am a bit conservative, and I want my browser stable and the look an feel should be stable also. I do _not_ want a new version every two weeks, which every time costs my effort and time to configure it how I want it.
    The question here is: How did you manage to disable the last version of Flash, and why? Why must I now register here and invest valuable time to get my browser to work again?? If I had done something, installed or removed something, ok. But I did not. (And yes, up to now I did update Flash and other plugins, when I was prompted to do so)
    Clearly _your_ management does _not_ work: If I use the solutions which FF itself recommends, it sends me in an endless loop: Install newest Flash, sorry, Flash is outdated, install newest Flash...
    Is this the 'new security'? Bah. If you did this for the 'normal user' (which you obviously do not respect anymore), you failed. And you failed completely for me: If software insists to do things 'automatically', it should at least do them reliably, _or_ it should ask. But working in the background, changing important things, reporting nothing, and then failing is exactly the reason why I disable all 'automatic' activities and want to be _asked_ before some idiotic piece of c.... deconfigures itself - and stops working...
    Hints to the Troubleshooting Info below:
    At this time Flash player is installed, shows in the systems software list as 'Adobe Flash Player 11 Plugin', Version 11.5.502.146. The rest are my normal plugins. Serveral changes to about:config were done by me in an effort to make FF usable again, without nagging 'info' bars...

    Additional information - according to the wiki you pointed me to, it was correct to uninstall flash using Windows control panel. I am very sure that I already had the latest version installed from the beginning, because Flash player pointed me to an update on Windows start (as usual) several days ago.
    The error clearly lies with FF, since despite an up to date Flash player it decided it wants it new - something to do with the blacklist? How can it tell, that its outdated, if it does not find it and not show it in the list of plugins?
    There is something fishy here...

  • How to get the last version of flash in MSI format automatically?

    How to get the last version of flash in MSI format automatically?
    Roberto Neigenfind
    Bravo Tecnologia
    www.bravotecnologia.com.br

    Hi Barbara,
    Flash Professional CS5.5 is a 32-bit application which can be installed on computers with either 32-bit or 64-bit operating systems.
    You can purchase this by Adobe's backward Licensing policy :
    " Adobe allows program members to order a current-version license but use a prior version. These members can contact Adobe Customer Service to request a serial number for the earlier version if they do not already have one. Prior-version software is available via ESD and can be purchased through standard resellers. The program member must follow all guidelines of the current-version EULA. "
    Please check the doc : http://www.adobe.com/volume-licensing/policies.html

  • I want to erase the new 8.0 version and go back to the last version so I can have my tabs and google back! HOW!!

    I just downloaded the new 8.0 version of Firefox, but all of my extra tabs, auto fill, Google search tool bar, etc, etc, are gone and I want them back!!
    How do I reverse back to the last version of Firefox?
    I tried "RESTORE" to the day before on my computer, but that did not put everything back.
    How can I get these things back??
    Thanx,
    C.

    Hey,
    There are a lot of benefits to running the latest version of Firefox. You should consider [http://input.mozilla.com/en-US/feedback leaving feedback] for the developers so that they can continue to improve the product. If you are just having trouble finding things, you go to ''Firefox > Options > Menu bar''. This will give you a more familiar feel by enabling all of the menu items you are used to. You should also check out this article on [https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 common questions after upgrading]. It will explain all of the UI changes. Everything is still there, it's just been moved around a bit.
    If you still want to roll back to a previous version of Firefox, just take a look at the Knowledge Base article [[Installing a previous version of Firefox]].
    Hopefully this helps!

  • Is there a way to find out, whether the student or the full version is currently installed?

    Hi everyone!
    First of all: Merry Christmas!
    A longer text with some background information is following. My question will be at the bottom.
    My computer is a good boy and it didn't disappoint me for quite a while now.
    I had once installed the student version (german) of CS3 extended on this one.
    Then, after having removed the student version some time later when needed, I have re-installed the full version.
    This time, however, it was in english and it wasn't the extended version either.
    After the software has accepted my serial id, I was quite content. It felt much better in english and I was able to use photoshop to the fullest once again.
    Today, I have gotten my hands on the upgrade version to CS5 (again in english and not extended, but that's all I need).
    After the installation guide has told me, that there are no programmes installed which are compatible to the upgrade, I was confused.
    I have realised that my current CS3 version was still the extended one, even though it was in english and it wasn't the student version either (at least, that's what I believe, because there were no "activate"/"deactivate" buttons in the help menu where it used to be in the german student version before).
    So while doing an upgrade to CS5, I had to chose CS3 extended from the list and had to type in the old student's version serial number.
    Nothing else worked, even though I've tried to chose the CS3 version in combination with the other serial number, which belong to the full version both.
    Now to my question:
    Is there a way to find out, whether the student or the full version is currently installed?
    (Other than looking at the box of course, that would be quite trivial. I am worried if the installation guide hasn't removed all components thoroughly.)
    Thanks in advance,
    Happy holidays,
    Jeff

    Thanks for the reply!
    That's what I thought as well. However, that wasn't the case. Whether it's the educational or the full version, both splash screens looked the same.
    At least for the CS3 version.I know how I was quite confused about that in the past when I'd realised that.
    The CS5 splash screen didn't say anything about a student version, but I was able to deactivate the application. I thought this was possible for the student version only.
    I've tried using the adobe clean program like suggested, but that didn't work either. The installation guide of CS5 still didn't bother asking for an older version.
    I.e.: It still used the educational serial number from before.
    After reinstalling windows on my pc, the installation guide finally wanted to know about my CS3 again.
    However, it told me, that the serial number of the full version in combination with CS3 is not valid. Just like it did before.
    Maybe it's because the full version was made in the USA and the CS5 upgrade version was made in Austria - Ireland?
    That would be really frustrating.

  • When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of CC and now it isn't editing photos!  HELP please required.

    When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of Photoshop CC and now it isn't editing photos!
    Lightroom opens up Photoshop but the image doesn't appear!  Any help gratefully needed!

    Ok I sorted it, by uninstalling and re-installing Photoshop

Maybe you are looking for

  • Error in upgrade from 4.6 to ecc 6.0

    Hi all, We are upgrading from SAP 4.6 c to ecc 6.0 anr we are getting the following messages UPGRADEPHASE XPRAS_UPG 1PEPU203X> Messages extracted from log file "SAPR700WG4.ORD" < Long text: Cause During the upgrade, a message relevant for postprocess

  • Can't import photos from camera -"Insufficient disk space on volume"?

    Please excuse my ignorance if there is a fix for this that I haven't found here.... I reinstalled iLife '11 yesterday because iPhoto would not recognize the camera. Now it recognizes the camera but it won't import the photos. I've tried all the sugge

  • Group by a fraction of time

    Hi, I have had a query that return the average of a value group by a date by hours. It works fine, but now I want to return the average by 15 minutes, or 2 hours; is it possible? That is my query, it group by hour: SELECT TRUNC(COL_DATE, 'HH24'), AVG

  • Oracle IAM integration with GRC 10

    Hi All, Our client is using Oracle IAM for user provisioning process. Now they have SAP GRC being implemented for two of their SAP systems. Now client wants to integrate SAP GRC Access Risks analysis (ARA) for SOD analysis and User Access Management(

  • Function module for BOM Update all line items at a time

    Hi, Please enlightenn us, which FM is do the update for BOM item datas. ( current FM is updated line item one item then come out and log in again updating another line item , thus cause more error are facing.) we want a FM to update one time all the