Is it possible to export/import schedule+objects separately from the background?
Hi all,
I work on a tutorial for software that is being developped. the functionalities are definitely ok but the design is being modified.
I would like to prepare the tutorial with the temporary design and definitive schedule and objects (buttons, texts...), and as a final step modify the design only. Is it possible?
Thanks in advance for reply.
Hello,
One tip: you can have as many master slides as you want, and even apply a master slide to a group. So in your case you could have the background for the normal calculator and for the scientific calculator on two different master slides. But all need to have the same resolution (width/height in pixel) if you want them in the same file.
But: you can duplicate slides, only every object will have a new ID on the duplicate.
Perhaps I understand wrong. If you have two files: copy the first file to a file with another name and change the master slide. Are you starting with images, not with a capture? Then even easier: import the images to the Library. Copy them to all the slides?
The Filmstrip itself is not very interactive, you cannot do a lot in it. But a duplicate file should have exactly the same branchings.
Wondering if you use advanced actions? Can you confirm that?
FYI: once I blogged about the simulation of a keypad:
Create a keypad simulation
BTW: you can print the branching panel, did you ever consider that? It has a lot more information than the simple Filmstrip
Lilybiri
Similar Messages
-
I want to read a pdf that has been saved to the database and if it has been signed display the signer's name and the sign date to the user. If the file is first saved to a physical location I can do this with the SDK/ JSObject it there anyway I can do this without a physical file? This is part of a C# application.
OK.
However, if you are using the SDK, then you are using Acrobat – it just may be doing all it’s work hidden.
So the plugin that you have installed in Acrobat is therefore also hidden, doing its work behind the scenes, on command of your application. -
How do I avoid the white line that forms around objects I've separated from a background?
This is a cropped corner of an illustration I removed from its opaque background and placed on a transparent background. The north and west borders show the whilte line that forms whenever I place objects on a transparent background. The south and east borders are the cropped edges -- they are clean and make the trasition from object to background color without that white line. With some objects, it's possible to use the Plygonal Lasso Tool, for instance, and trim that object away from the background. With portraits or irregularly shaped objects, though, it's necessary to use the Magic Wand or other means to trim the background away from the object, which results in that unwanted white line. I've read for hours online about this problem and have found no true resolution: Defringing, Removing White Matte, Anti-aliasing, trying to predict what color you'll lay the silhouette on and working in that color, and on and on. It seems as though Photoshop would be relied upon heavily by professionals who need to place objects on top of one another without intrusion. Does anyone have a method that really works?
Hi! If the solutions you mentioned aren't working for your project, it might be worth learning a little bit about Layer Masks. This is a page that explains how Layer Masks work. http://helpx.adobe.com/photoshop/using/masking-layers.html
A Layer Mask is a black-and-white image that corresponds to your source image applied in such a way that white areas display and black areas don't. So for your project, you would want to use Photoshop to turn your scanned illustration into a black-and-white image where the area you want to keep is white, and the area you don't want to keep is black. Here is a demo using your uploaded image:
1. Open your image in Photoshop. Right-click on your source layer in the Layers Palette and select Duplicate Layer.
2. With the upper layer selected, use Image -> Adjustments -> Desaturate to turn the layer black-and-white.
3. Use Image -> Adjustments -> Invert to reverse the black and white. Now the white background should be black.
4. With the upper layer selected, use Image -> Adjustments -> Levels. Move the black, white, and gray arrows such that there is a hard black-and-white contrastwhere you want the white background to be removed.
5. You may have to use the lasso tool or the brush tool to complete the silhouette of the image against the white background.
6. With the upper, black-and-white layer selected, Edit -> Select All and Copy. Turn the layer visibility off so that you are again looking at the original image.
7. With the lower layer selected, click the Layer Mask icon. Alt-click on the Layer Mask to edit the Mask directly.
8. Edit -> Paste to apply the black-and-white image you created as a Layer Mask. If you then click the layer icon again, you should be looking at your correctly cropped image!
Hope this helps. -
Is it possible to export full PCD object list along with their PCD ID?
Hi
Is it possible to export full PCD object list along with their PCD ID to an excel sheet or txt file?
Any help will be appreciated.
Regards
VineetHi,
I have provided a simple method below to Get all the PCD objects PCD ID.
1. Create a transport package.
2. Add all the PCD objects for which ever you need the PCD ID.
3. Now release the Transport package as the "File system" mode.
4. Once it is done successfully, it will display all the transported object and its corresponding PCD ID in a table format.
You can simply copy and paste it in a excel to get the PCD ID for the PCD objects.
Hope this is helpful.
Thanks,
Mahendran B. -
Possiblity to import any particular table from the full dmp file
Hi,
I am using Oracle 10G database.
I a have dmp file.
I need to import only a particular from that dmp file.
Is there any possiblity to import a particular table from the whole dump.
Thanks and Regards,
Ansaf.Ansaf wrote:
Hi,
I am using Oracle 10G database.
I a have dmp file.
I need to import only a particular from that dmp file.
Is there any possiblity to import a particular table from the whole dump.
Thanks and Regards,
Ansaf.
You can specify like below example
impdp hr TABLES=employees, xxx, xxxCheers -
How to export/import prefs.js? Copying the file doesnt work
I want to export/import about:config changes. The paths is "Firefox/Profiles/i63866ho.default-1384517947097/prefs-js". I copied prefs.js, all the content of the folder "i63866ho.default-1384517947097" and "Profiles" folder also. Nothing worked. When I copied prefs.js it didnt do anything and comes back to the old/first prefs.js after restarting firefox. When I copy the folder it says it cannot be done.
Can someone help me?
Thanks a lotThank you for the info.
I finally got the way, no need to change profiles.ini
I was as close as far from getting it. I was replacing Profiles folder when firefox was open. But firefox must be closed, I must copy all the content from the extrange named folder inside Profiles, replacing it for the content of the new one after restoring.
1. Set firefox with all changes on about:config, extensions, tabs, etc that I like, and then close it, cmd+q
2. Copy all content from the extrange folder in Profiles (something like niwxnm2h.default-1384723124135)
3. Open firefox and restore it, closing it again when it restarts.
4. Now, being firefox closed, replace the content from the new extrange folder by the old / copied.
5. Done, just start firefox.
So now I have two copies, with changes on about:config and with about:config and extensions.
Link where I found it: https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles?esab=a&as=aaq
Cheers and thanks -
Hi, I'm trying to to export/import a XML file in the CP8, but it keeps telling me "Cannot import XML". To solve the problem I already tried following things:
1. Exported the file and then attempted to reimport the unedited file into a copy of the CP-project
2. Edited only a single character (using Notepad++) and once again tried to import the XML-file in the project.
3. Renamed the XML-file and the CP-project. Is there anyone who has solved this problem?
/JPasted this same reply/reference in your LinkedIn group post...
Try this thread (re: Run As Admin)
Import Captions in Captivate 5 - not working? -
Fm or metod that retrieve the lock object name from the table name
HI ALL,
there is FM or method that retrieve the lock object name from the table name ?
Best regards
NinaCALL FUNCTION 'ENQUEUE_REPORT'
EXPORTING
gclient = sy-mandt
gname = 'RCTMV' "Table Name
GTARG = ' '
GUNAME = SY-UNAME
IMPORTING
number =
SUBRC =
TABLES
enq = lt_seqg3
EXCEPTIONS
communication_failure = 1
system_failure = 2
OTHERS = 3 -
Is it possible to allow iphoto to delete fotos from the finder? (when iphoto doesnt copy the fotos into an own library)
No -- iPhoto does not ever touch an photo file that is not within its database
THis is one (of the minior) resaons that it is very strongly advised not to uncheck the preference to copy imported items to the iPhoto library - it makes importing and deleting more difficult and makes upgrading or replacing defective hardware much, much more difficult
LN -
On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo
I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks -
I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace
I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant. -
How do I import an image directly from the internet without printing and scanning it in first?
How do I import an image directly from the internet without printing and scanning it in first?
You can also Ctrl click on the image, save the image to your desktop and open it in Photoshop.
1.
2.
3. Open in Photoshop by double-clicking on the saved image on your Desktop or Cmd o in Photoshop.
I don't see any point to copying and pasting from a browser into a new file in Photoshop.
If you want to put an image onto an already open image in Photoshop, use the File > Place... command and select your saved image.
Gene -
How can i import my contact list from the Nokia Suite to my I phone?
how can i import my contact list from the Nokia Suite to my I phone?
Oscar, keep in mind that my suggestion could not be the best one.
I have a copy of Nokia suite on my Windows XP partition on my Mac, just to test it.
The second icon on the upper row explains as a syncronisation with Outlook.
Try to do it and later you should use the iClod manager from Apple and Sync Outlook to ìiClod and to any iPhone iPod and so on. -
How can I import not only apps from the old iphone to the new iphone, but also the content of the apps?
You can sync apps as you normally would, but I do not believe this copies over app specifc data (i.e. saved game status/scores).
You can always restore your new device with a backup from your old device. -
Export file to PDF - where is the"background activity" in InDesign CS6?
Export file to PDF - where is the "background activity" in InDesign CS6?
i´ve been told that I can solve the problem by clicking in to "background activity", but I cant even find it? Where is it?
I have never ever had this problem, and I cant do my work now.
Thank you!jaisy wrote:
i´ve been told that I can solve the problem...
I have never ever had this problem...
It would be easier to help if we actually knew what the problem is.
Maybe you are looking for
-
I have the following problem: 1. I'd like to include additional Information in my table of contents which I don't want to appear in the text I refer to. Example: I do have a picture with a caption saying: picture 1: Blablabla. And I want to have the
-
How do I get the EMBEDDED HTML CODE after creating a SLIDE SHOW using Photoshop Elements 8?????
-
hi, sap gurus, good morning to all, how can i add STORAGE LOCATION field which is not in the standard tables namely KOMP, KOMK, and KOMG. how to include it in our FIELDS FROM FIELD CATALOGUE. if we include this field is there any impact on the standa
-
Hi all, I would like to updgrade a database existing in a Linux machine from 10.2.0.3 to 10.2.04 . I could not find the files for the same in OTN. Could some one point me a location for getting the files. Also Im not familiar with the Linux commands.
-
Ugh: "iTunes could not connect to the iTunes Music Store"
G5, OSX 10.4.10, iPod 5G 1.2.1, iTunes 7.3.1. Actually I have not been able to access the music store for over a year. It stopped working after an iTunes upgrade I do not recall. 2G finally died and I just bought a new 5G. I can enter the music store