Is it possible to give everyone all permissions to all files?

I absolutely hate the fact that my Mac keeps nagging me for my password all the time because it needs permission to a file, and even worse with Apache which doesn't ask, it just fails with no error. I have never had an issue with having all permissions in Windows, is this possible on the Mac?

You must be joking (and trying to mess with me) ... You don't really have a Mac, do you? Most Mac OS X software is installed without affecting the system. You often drag and drop the application to the Applications folder. There is no funky "registry." There is no add/remove programs control panel. Mac OS X will pop up a warning about running program ABC for the first time; that's just an "OK" there, no user name and password. Applications, user data/settings, and the system are intentionally kept separate. Only software like system updates and security updates makes changes to the system, and that's just a small percentage of software most people install.
Dealing with permissions in Mac OS X is far easier and more pleasant than dealing with anti-malware programs in Windows, and the warnings that pop up if you don't have them installed (and paid for).

Similar Messages

All files in a shared folder don't have permissions

I have two users on my mac and am having some issues with sharing files. I created a shared folder and gave the other user read/write permissions. When I log in as that user, the folder can be accessed, but some of the files in that folder cannot be accessed. These are all photos, and for the most part I'm dropping them into the shared folder from iPhoto.
I tried it again by using the Public folder with the same result. However, there isn't consistency with the actual files that don't have permission. In other words, the shared folder I created may have a file that does not have permission, but that same file does have permission when I dropped it in the Public folder. So it is totally random as to which files in the shared folder don't have permission to be accessed.
I also tried to simply drag the files to the other user. Same result.
Can anybody help me with this? I'm stumped as I thought once a folder was shared that all contents are accesible.

Sharing a folder does give others access to it, but it does not change the permissions of the files inside. Other users can probably read everything, but they can't modify files that they do not own unless the owner of those files has changed the permissions to allow it, or other steps have been taken to provide additional access such as the use of an Access Control List (ACL).
Apple doesn't include a GUI utility for manipulating ACLs, so your choices are to use a third-party utility such as TinkerTool System (not free) or the Terminal application. The Drop Box folder in your user's Public folder has an ACL entry that gives access to change just about everything on files that are dropped there, so a Terminal example that sets similar permissions for everyone (a particular user group can also be used) would be:
1. copy and paste the folowing into the Terminal window (there is a trailing space):
chmod -R +a "everyone allow list,add_file,search,delete,add_subdirectory,delete_child,chown,file_inherit,directory_inherit"
2. drag the desired folder into the Terminal window (this copies the path)
3. press return
Note that ACL entries only work on items that have been created in the folder - not moved there - so you should use option drag to make a new copy in the shared folder.

Is it possible to give seperate authorizations for different users

Hi all,
I have a requirement in crystal reports.
I have created parameters for city and calmonth.
There are 5 cities for example chennai,mumbai patna,agra,bangalore.
For that single calmonth is there as jun2010.
I have done the report. In info view i want ony the chennai city guy to see only the chennai report.
Like wise each city guy should see only their respective reports.
In parameters while drill down i can see all the cities but i want only the respective city user to see only that report.
So if the chennai city guy drill downs he has to see only chennai city
so do you think is it possible to give authorizations like that?
can any one help where can i do it either in crystal reports by writing some logic or in INFOVIEW by giving some authorizations or in BW?
I hope everyone understand my Question.

As I said it is much more efficient to implement row level security in the BW itself. Fetching ALL data in the CR reports first and then doing the record selection is not recommended because:
1) You introduce additional security risk in your organization by ignoring data souce security settings.
2) You fetch much more data that you really need in your report and you let the CR report engine do the work. SAP BW can process mass data more efficiently than the CR engine. CR is optimized for displaying data.
3) You may violate the license agreement of your SAP BW system by providing BW data to more users than licensed.
Regards,
Stratos

All files are locked, a new entry in permissions and more

Following instructions from here on how to try to correct another issue, I was repair permissions and to boot in safe mode. Since then all kinds of things are messed up.
I had to reset PRAM because the home and boot screens were were all stretched out of whack (this situation has occured once before shortly after getting this new machine)
EVERY SINGLE DATA FILE created prior to this safe mode is now LOCKED. EVERY ONE!!!!!! If I try to save any file so far I have tested, I am told the file is locked and I do not have permissions. My user mode didn't have administrative control before, but I changed that because unlocking everything to use it was more complicated having to enter the username and password. New files created are also locked. However, a new Pages file I have tested shows locked but it will save to the same file with a CMD-S.
Having to unlock files to save work in them really slows work. Apple not allowing Save As on Apple apps is getting really tedious. I tried with a non-Apple app (PhotoShop) and its files are locked after creation. This means I have to unlock every stupid file before I can save it, then it relocks If I go into Get Info to unlock the file, as soon as i close that window, the file shows locked when I do a new Get Info. This is not a good user experience!!!!!!!!!!!!!! I have hundreds of thousands of files used in publishing, graphics, photos, and music. I tried to save an existing Photoshop file back to the Desktop and was told I could not save because was locked - that I needed to unlock the file or enclosing folders. When Photoshop closes it says can't save Preferences because file is locked.
If I unlock the Sartup drive it relocks as soon as the Get Info window closes.
In Sharing and Permissions the user called Everyone has a custom settings and some files even have two Everyone entries. Newly created files have had the User with Read & Write and Staff and Everyone with Read Only. My user folder Get Info shows locked with the user, staff and everyone with Read & Write permmissions. If I unlock in Get Info it reverts to locked after I close the Info window.
Safari opens to the same page on this forum where another problem was discussed. I have reset selected items in Safari that I thought might have caused this, but no change.
Pages keeps opening a page that was thrown in the trash and is not even on the computer (at least doesn't show in the finder),
Numbers keeps opening a file that was opened and saved days ago.
iDVD will open the same project each time, even if something else has been worked on since.
I have cleared recent entries in these programs and the field keeps coming back when I open again.
I unchecked the Restore windows when quitting option in General Sys Prefs and when I open it again it is checked. I know that Lion will reopen a page if I quit without closing the window first. Now, at least with Apple apps, the same file opens now whether it exists or not as well as the new file I am opening by clicking on it.
I have run permissions check in Disk Utility several times.
It seems that it is affecting Apple apps that remember where there were last and the visiting history.
Autosave on apps other than Apple can't save because the files are locked and I get error messages.
iPhoto files saved on a firewire drive are also show locked but testing on a duplicate file, I found I can edit with PhotoShop and it will save the changes.
With Finale, it has saved the files, even though locked. The odd thing is that in the finder it shows the correct creation and modifided dates, but it shows an old last opened date. Pages documents show all three with correct dates/times.
I suspect there is at least one if not more Pref plist files that needs to be fixed, but I have now idea where to start.

HI,
Make sure you are logged in as the admin user.
Right or control click the MacintoshHD icon then click: Get Info
At the bottom of the Get Info window, click the gold padlock icon. You will be prompted for your admin password.
Under Privilege where you see: Read & Write "toggle" the arrows to set your permissions for system / admin etc.
Close the Get Info window.
Carolyn

How to set all file permissions to default?

So a few background notes are in order. I came across an article on the NSA's website titled Hardening Tips for Mac OS x 10.6 "Snow Leopard", needless to say I have come to believe I have made this irreversible. The NSA suggested to do some fancy command line coding to disable this, modify that, and change permissions to this. After hours spent on "hardening" my system, I have little hair left to pull in frustration. Is there any way to restore all file permissions back to default? I have used the Repair Disk Permissions, but that has done very little. To give the scope of what permissions have been skewed, I have observed several things:
The desktop wallpapers, on all Desktops (as I'm in Lion 10.7.3), start from the same picture every time. I have the wallpapers changing, randomly, every 5 minutes.
Safari doesn't keep the home page. No matter how often I try to change the homepage, I restart Safari, and I'm right back to the original homepage.
Firefox doesn't retain the fact that I want it to be the default Web Browser. In fact, it keeps "forgetting" that I've used it before, and thus brings me to their awesome start page whenever someone first uses Firefox.
Spotlight gets "stuck" i.e. almost every time I start my machine, it indexes. Even after I let it finish indexing, the next time I start my computer, it starts again.
I have to input the administrator password after almost every activity, such as copying to the desktop, moving an application not bought from the Mac App Store into the /Applications folder, deleting a file from anywhere inside my home folder, etc.
Some preference panes that need access to certain folders, such as Hazel's access to my desktop, are denied that access without ever prompting me for a password (though even if it did, it would get rather annoying after every startup)
My firewall (in System Preferences>Security & Privacy>Firewall) doesn't "remember" that I do indeed want Dropbox to accept incoming connections. I have to input my admin password at each startup after clicking "allow"
Opera pretty much doesn't function. Its bookmarking capability, home page, saved tabs, any thing that requires the saving of any type of preference to the computer results in a dialog pop up informing me that Opera failed to save what it needed, and prompts me to "Try again" or "Cancel" (hint: the "Try again" button doesn't work)
There are more symptoms of an ever growing problem.
I have backed up my machine from Time Machine, but I think it retains these file permissions, unless I'm wrong.
Summary:
How can I fully restore EVERY file permission back to default? Repair Disk Permissions doesn't work
Is there a way that I can re-install Mac OS X, restore through Time Machine, and achieve the default file permissions, essentially losing all file permissions?

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application by entering the first few letters of its name into a Spotlight search. Drag or copy – do not type – the following line into the window, then press return:
chmod -R -N ~
If you get an error message about permissions, enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Is it not possible to give the select single field without an into clause

Hi,
i have to check whether my input value( only one filed) is available in the table.
for eg i need to check whether company code is available in the table t001.
then i will give .
data lv_bukrs type t001-bukrs.
lv_bukrs = 1010.
select single bukrs from t001 where bukrs = lv_bukrs.
here its asking for me to give a vaible to store the bukrs that is
select single bukrs into dummyvalue from t001 where bukrs = lv_bukrs.
Is it not possible to give the select single fieldname without an into clause

Its Possible by declaring the tables statement
<b>tables : AFKO.
select single * from AFKO where <condition>.</b>
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used. The addition ORDER BY can also not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Notes
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
If accessing tables for which SAP buffering is planned for single records, the SAP buffer is bypassed if the addition SINGLE is not specified. This behavior depends on the current implementation of the database interface and may change in future releases. In particular, it should not be used to bypass the SAP buffer. You should use the explicit addition BYPASSING BUFFER for this instead.
The addition SINLGE is not permitted in a subquery.
Regards
- Gopi

Removing ownership & permissions for all files burned to a DVD?

Hello,
I am new to the concept of "ownership & permissions". Do they apply to files burned to DVD or just the files on the computer? I would like to burn some files onto a DVD for backup and I do not want to copy the "ownership & permissions" settings of the files - I just need to backup the files only. I would like to back the files up for a year or two and I am concerned that in the future I may not remember my usernames or passwords to access these files from the burned DVD.
Do "ownership & permissions" apply to files burned onto a DVD? Or does the DVD burning process erase the "ownership & permissions" settings? I tried to burn a DVD from OSX by creating a burn folder and I didn't see any setting that allowed me to remove the "ownership & permissions" settings.
Thank you for any insite into this.

Thanks Mulder,
Here is what I am trying to do:
I do not need to backup any system files - I already have OSX on my original DVD if I needed to re-install. I only need to backup the users' document files and maybe some email folders in the users' libraries.
I set up three accounts:
1. The first account is for admin purposes only.
2. The second is for my own use - it is the account used most often on this computer.
3. The third account is for my family.
Note: I will set up a fourth account for our student renter later.
I will have access to the user names and passwords of all these accounts in case I need to go into the accounts to back up their documents. But the user(s) of the family account will not have my password - so the kids don't accidently erase any of my files.
When working in the second account (which is used most often by myself), I sometimes need to place newly created files into the "document" folder on our family account (the third account). And so I purposely changed the "Ownership & Permissions" on the "document" folder on our family account (the third account) to Group: second account. This allows me (the second account) to place files into the "Document" folder of the third account (the family account). After doing this, I also need to change the "Ownership & Permissions" of any added files to Group: third account so the user(s) of the family account can edit (read and write) the files I add from the second account.
An alternative setup that I decided not to use: I could have made use of the "users/shared" folder for this, however, I do not want everyone to be able to access these files - especially when I set up a fourth account (or even more accounts) in the future. I only would like to share the contents of the third account's "Document" folder between two users (user of the second account and the user of the third account).
Now I will continue the explanation of my setup:
Over time the "Document" folder of the third account (the family account) will become filled with a mixture of files with different Ownerships - some created from the second account and some created from the third account - but all editable from either the second account or the third account by assigning each other access via the "Group" designation in "Ownership & Permission". Because of this mix of files with different ownerships, I could, if I wanted to keep the settings consistent, select the "Document" folder of the third account (the family account) and change the ownership of all enclosed items to the user of the third account by using the "Apply to enclosed items". I would probably also change the "Group" designation to the second account too.
I will be able to make all these changes because I have the user names and passwords for all the accounts.
Now here is my main question:
My concern is that when it comes time to backup the document folders onto DVD, what if in a couple years I forget these passwords? You see, I would rather not copy any "Ownership & Permissions" settings of the files onto the DVD. Lets say that in a couple of years I go back to my DVD backup and need to pull off some old jpeg files and put them onto my computer. When I insert the old backup DVD will it say: "Sorry, you do not have access priviledges to view these files" or something like that? That would be a real problem. These are my own files. Why would I want to risk making an important backup DVD un-useable in the future because of some long-and-forgotten permission settings?
What I would like to do is copy all my files onto DVD for backup in such a way that "Ownership & Permissions" are not copied. Why put the risk of a limitation on your important backups? Is there a better way to do this? What do other people do?
Am I making this more complicated than it has to be? As you can tell, I am a beginner with OSX (and permissions) and I am looking for some advice. Thanks
Mulder, when you wrote:
"If you're trying to backup just selected files, such as your purchased music or applications, etc., then ownership and permissions shouldn't be a problem."
did you mean that ownership and permissions are not copied? That would be great. But I am not sure if that is what you meant to write. Thanks!

Is it possible to give an added row a Color.

Hello I read data of a txtfile and than place the data in a jtable.
I know how to give a selected row an other color but my question is:
Is it possible to give an added row a Color.
I make the new row this way
moddellist.addRow(new Object[]{data,""});
Now I want this added row red is this possible.
I don't know what the rowIndex or Cell number is.

The colour of a cell in a JTable is assigned by a TableCellRenderer. If you look at how that works, all it knows is the object in the cell, the table, the row and column number, and whether the cell is selected or focussed. It doesn't care when things happened.
So if you want your TableCellRenderer to colour your cells based on something that isn't in that list, then you have to modify the design of your object, the one in the cell, so that it contains information the cell renderer can use to decide what colour to render it.
Based on your description I can't say much more than that, because it's hardly a complete description of how the colour scheme is supposed to work.
And by the way the people in the Swing forum are better at answering Swing questions.

All my documents got deleted from all of my devices and I have no idea how. Is it possible to get them all back? Please help

I went into my pages app the other day and found that all of my documents were GONE. I have no idea why or how, but they are gone from all of my devices. Is it possible to get them all back? Please someone help me!!

Without a backup source I don't see how you'll be able to restore them. You might just give it some time to see if they reappear due to some server glitch at Apple's end. If you think there may be an issue with Time Machine you can try posting a question on that over in the appropriate OS X forum.

HT1311 i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

If you are now in the UK then you can try contacting iTunes support and see if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Disk utility can't repair the Macintosh HD, asking toback up all files as possible? and how to reformat the disk?

disk utility can't repair the Macintosh HD, asking toback up all files as possible? and how to reformat the disk?

Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
Buy a new Drive. Or two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
If the old drive eventually provides some needed data, and is salvageable, Merry Christmas.

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

You could try Paragon HFS+ for Windows. That would allow you to read and write files from a Mac-formatted drive.
Clinton

It should be possible to set default behavior for all file types

It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
''edited to remove swearing''

I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
represents the change I just made when applying Detail view to all Picture folders.?
This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
settings), and this is the result:
this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
performance or reliability.
Yolanda Zhu
TechNet Community Support

Possibility to give a pdf a variable when opening?

Is it possible to give a PDF a variable. The problem is:
I want to call a pdf with a url from webbrowser. When it opens it should import a xfdf or xml-file. I'm searching for a way to tell the pdf which file to import. I thought about a param in the url but I think it's not possible. Is it possible to put a javascript in an pdf which can read a cookie in which the path to the xml-file is? Is there another way to tell a pdf file in the moment when it is opend which xml file it should import??

Try the following to capture the URL and then build your logic based on the value.
var cURL
cURL = this.baseURL
xfa.host.messageBox(cURL)
this is a JavaScript function may used in form:ready event. If you get the value displayed you can save it and use. I have no similar environment to test this myself. Please let me know how that works.
Good Luck,
SekharN
www.lawson.com

Is it possible to give each page within one pdf document a specific set of print settings?

I have a complex document (catalogue) that requires printing. There are several different printer settings required and each one is specific to each page within the document. For instance pg 1 is single sided in colour, page 2-3 is duplexed in b&w, page 3-8 is duplexed in colour, etc.... Is it possible to give each page within the pdf document a given set of print settings and then print the entire document as a whole?

Hi jennyskop
I assume that is not feasible ...You need to give the print command again and select the respective pages and their settings !

Is it possible to give everyone all permissions to all files?

Similar Messages

Maybe you are looking for