Is it possible to load a request already updated in the data target ?

Hi Experts,
Question: load a request which is already updated in data targets and data mart status is set
Data flow:
source system -
> ODS1 -
> Infocube1
Now, requests are first loaded into ODS1. Then these request are loaded into Infocube1.
Now, i deleted the request in the Infocube1.
Is it possible to reload the request from ODS1 to Infocube1 ?
Please suggest how.
Regards,
Suraj S Nair

Hi Masthan Kaniganti ,
It is possible to load the data but not same request.
The reason why we can not load the request is in ODS level delta resords are updated ,hence with the selection condition we have to load the present and previous data.
and one more thing...
If you are deleted request in Cube level means, we can reconstuct the same request via reconstruction tab..
Hope this helps you...let me know if you any further ifo on this..
Best Regards,
maruthi

Similar Messages

Load status in PSA "Request not updated to any data target using delta"

Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.

Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi.

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

PSA showing Request not updated to any data target using delta

Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
Manish

Reg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help

The request has not yet been updated into the data targets.

Request successfully loaded into PSA - start further update
Diagnosis
The request has as data target "only PSA". It arrived there successfully.
System Response
The request has not yet been updated into the data targets.
Procedure
You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
I am getting this error daily. In RSMO screen status tab option called u201CProcess manuallyu201D, so am doing this manually daily. Is there any solution to fix this problem permanently?
Thanks & Regards,
Praveen Yagnamurthy.

Hi Praveen,
Dont you have Process chains in Production system for loading thid data. If so its better to schedule the PC rather go for manual loading. In Prod system you will not be able to change. You will have the make the changes in the Development Environment & collect these changes in a TR & then move them into Test environment first to make sure it is working fine. And then once it is tested, you can move the TR to Prod sys.
Hope it helps!
Regards,
Pavan

Delete Request which is already updated to Futher data target

Hi Experts,
Is there any way that we can delete a request from infocube which is already updated in to another data target.
My requirement is i have PCA infocube which 3 full loads and 1 delta. I can delete the full loads by using delete overlap request process type. But from PCA infocube the data is futher updated in another planning cube as delta request to update the actuals.
This is causing the problem as the data is getting further update to another cube as a delta request i am not able to delete the overlapping request of full loads in PCA cube. Any ideas or suggestions would be a great help.
please note that i cant change the dataflow at this point as this cube is already in production.
Thanks,
RRRRR.

Hi R,
thanks for pointing this out.
I still think the procedure that I described would be suitable.
Let me re-capture: You want to delete the Full request in the Infocube, but you don't want to touch the data of this request that has been already updated in the planning cube.
1- Delete the full request in your infocube
2- Confirm the messages that this will lead to de-activating the delta to the planning cube (as explained previously)
3- Load your new full request into your infocube iif you want to
4- Set up the delta between Infocube and Planning cube again, by requesting an INIT w/o data
This way you will be able to change the data in the Infocube, but not impact the data that has already been updated in your data target the planning cube.
In case you want the new FULL request to be updated via a DELTA into your planning cube you have to swap the order of steps 3 and 4 above.
Hope that clarifies this approach to you.
kind regards,
Ralf

Request not updated to any data target using delta

I am on BI 70 using 70 DataSource. I executed InfoPackage in full update, then ran DTP in full mode. There is only 1 data target. The requests were successfully updated in the target DSO. However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle.
My questions are:
1. Is this normal?
2. I need to do more full loads. When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
Thank you.
Rebecca

Hi Rebecca,
To answer your questions
1. Yes. This is normal.
2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA) would be re-loaded to the same data target .
If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
Hope this helps!
- Meera

Error in psa level - Request not updated to any data target using delta

Hi,
This is pavan and am facing this issue any one know for below issue to solve.
Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come
to psa level but from here it is not updated to infocube so for that i have tried update manually
it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
Regards,
Pavan Kumar

Hi Pavan Kumar ,
Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
and you will get monitor for that request then change the QM status to red after that load new request .
Thanks
Hanumanthu

Delta Upload request from ODS is not including the Data target of planning

Hi,
I have a process chain in which there is a delta upload from ODS to 3 different data target. One of the data target is the planning cube. last 2days back i have changed the process chain schedule after was the Delta request is not hapenning for Planning cube. The process chain contains the changing the planning to load mode and load to planning mode. Every thing is working fine but the Delta is not happening for the Planning cube. Delta request are going correctly to the Other 2 data targets. Now it was like Delta has excluded the Planning cube. Another this there is nto planning package is appearing in the Infousources. and when I am trying to upload manually from ODS to Data targets it say that No delta is there. Please help me in this. This is a production problem. I have checked all the data monitors every thing is from but no delta is hapenning for the planning cube.
Thanks
Naveen.

Resolved

I have lost my iphone4 and i guess the theft have already clear up the data include my mails and so on. what can i do? i use the iphone only 2months and i dont have any icloud or mobileme acc. how apple can help me?

i have lost my iphone4 and i guess the theft have already clear up the data include my mails and so on. what can i do? i use the iphone only 2months and i dont have any icloud or mobileme acc. how apple can help me?

Apple can't/won't help you:
Reporting a lost or stolen Apple product - http://support.apple.com/kb/ht2526 - "... Apple does not have a process to track or flag lost or stolen product..."
Texas Mac Man links on lost/stolen i-devices - https://discussions.apple.com/message/18781718
Contact the police about the theft. Change passwords on any accounts used with the device. Contact the carrier about discontinuing service and possibly blocking future contracts with the phone. Shop for a new phone.

My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?

My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?

Oh goodness,SLEEPER888. We wish you didn't have this problem while trying to complete this update.You have done quite a bit of troubleshooting on your own. If the phone update does not take, we would need to replace it with the warranty. Is it still locked up?
TamaraH_VZW
Follow us on Twitter @VZWSupport

Having problem with updating to 10.6.6 , my software now is 10.5.8, when the my mac is tellin me that i have already update to the lastest software when i haven`t :/ help !

having problem with updating to 10.6.6 , my software now is 10.5.8, when the my mac is tellin me that i have already update to the lastest software when i haven`t :/ help !

You need to find a store selling it and purchase it. If you buy it from an online store, it comes in the form of a DVD shipped to you.
Unless Apple or someone with a site license applicable to you says otherwise, you can't download it.
(60044)

Displaying datas of each and evey request in the data target

Hi All,
Can we display the datas of a single request alone in the data targets such as DSO, Cube, etc.,
If yes please let me know the procedure.
Thanks in advance.
Regards
Geetha

You can do that,
for DSO - se16 -> give the change log table name of the DSO (here change log data of the dso should not be delteted)
cube - listcube -> give the request number ( here that particular request should not be compressed)
If it satisfied above conditions you can display that particular request.

I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?

I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?

I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?

[svn:fx-trunk] 14009: DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes .

Revision: 14009
Revision: 14009
Author:   [email protected]
Date:     2010-02-05 12:53:05 -0800 (Fri, 05 Feb 2010)
Log Message:
DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes.
The element also needs to revalidate if it is resized, whether or not the IR existed before. This wasn't part of the bug but Hans realized this when he did the code review.
QE notes:
Doc notes:
Bugs: SDK-25354
Reviewer: Hans
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25354
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Please can u answer it fast

Is it possible to load a request already updated in the data target ?

Similar Messages

Maybe you are looking for