Is it possible to pass variables from Tidal to the Peoplesoft run controls?
Does anyoen know
•1) Is it possible to pass variables from Tidal to the Peoplesoft run control page such as current date?
An example would be updating run control parameters for a PSQUERY.
•a) From date
•b) To date
•c) Business units
Thanks,
Jay
Edit the job - go to Run Controls Parameters tab - select the param you want in the Override column then click on the Variables button on the bottom and select the variable you want
Similar Messages
-
Passing variables from one swf to another
I am facing problem to pass variable from one swf to another.
I am using loadMovie to load another swf. how can I pass a variable
value to another swf. Can anyone help me plz? It is somewhat
urgent.
thanx in advance.first of all:
this is the Flash Media Server and your problem is not
related to FMS....
second thing related to the "somewhat urgent" :
we, users on this forum, are not there to do your job... so
calm down otherwise no people will answer your question. This forum
is a free support forum that community of Flash developer use to
learn tricks and to solve problems.
Possibles solutions:
If the two swf are seperate you can use LocalConnection to
establish a connection between different swf.
If you load a second swf into the first one you can interact
like a standard movieClip(only if there from the same domain or if
you a policy file on the other server)
You can use SetVariable(via Javascript) to modify a root
variable on the other swf and check with an _root.onEnterFrame to
see if the variable had changed in the second swf.
* MovieClipLoader will do a better job, in your specify case,
than the loadMovie. Use the onLoadInit event to see when the swf is
really totaly loaded into the first one otherwise you will have
timing issues.
My final answer(lol) is the solution 2 with the
notice(*) -
OBIEE 11g How to pass variable from one prompt to another prompt in dashboard page.
How to pass variable from one prompt to another prompt in dashboard page.
I have two prompt in dashboard page as below.
Reporttype
prompt: values(Accounting, Operational) Note: values stored as
presentation variable and they are not coming from table.
Date prompt values (Account_date, Operation_date)
Note:values are coming from dim_date table.
Now the task is When user select First
Prompt value “Accounting” Then in the
second prompt should display only Accounting_dates , if user select “operational”
and it should display only operation_dates in second prompt.
In order to solve this issue I made the
first prompt “Reporttype” values(Accounting, Operational) as presentation
values (custom specific values) and default presentation value is accounting.
In second prompt Date are coming from
dim_date table and I selected Sql results as shown below.
SELECT case when '@{Reporttype}'='Accounting'
then "Dates (Receipts)"."Acct Year"
else "Dates (Receipts)"."Ops
Year" End FROM "Receipts"
Issue: Presentation variable value is not
changing in sql when user select “operation” and second prompt always shows
acct year in second prompt.
For testing pupose I kept this presentation
variable in text object of dashboard and values are changing there, but not in
second prompt sql.
Please suggest the solution.You will want to use the MoveClipLoader class (using its loadClip() and addListener() methods) rather than loadMovie so that you can wait for the file to load before you try to access anything in it. You can create an empty movieclip to load the swf into, and in that way the loaded file can be targeted using the empty movieclip instance name.
-
Is it possible to pass contacts from pc to iphone 5?
is it possible to pass contacts from pc to iphone 5?
Hello yoseba,
Thank you for contributing to the Apple Support Communities.
It sounds like you want to move or sync contacts on your PC with your iPhone 5.
Depending on which application on your PC stores your contacts, you may be able to sync them with your iPhone using iTunes or iCloud.
For example, iCloud will sync contacts from Outlook 2007 or later, as mentioned in the System requirements for iCloud.
You can find the steps to set up iCloud or iTunes to sync on these support pages:
Apple - iCloud - Learn how to set up iCloud on all your devices.
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
Sincerely,
Jeremy -
Is it possible to pass blob from java to PL/SQL ?
Hi, I try to bind a PL/SQL function who return a blob to a java class :
Signature of java method :
public static Blob getBLOB(int aId, String aJDBC) {Create PL/SQL function :
create or replace function aa_java(myPiId in number,myPiJDBC in varchar2) return blob
as language java
name 'zip.ReadBLOB.getBLOB(int,java.lang.String) return java.sql.Blob';
/In java code, my blob has the right size (150 Ko) but in PL/SQL, size = 0 !!!
Any ideas ?
Thank you, but I think I have a Java problem...
Here is my code :
package zip;
import java.sql.*;
import oracle.jdbc.OracleDriver;
import oracle.sql.BLOB;
public class ReadBLOB {
public static BLOB getBLOB(int aId, String aJDBC) {
BLOB vBlob = null;
try {
DriverManager.registerDriver(new OracleDriver());
Connection connection = DriverManager.getConnection(
aJDBC,
PreparedStatement stat = connection
.prepareStatement("select image from aa_blob where id="+aId);
ResultSet rs = stat.executeQuery();
if (rs.next()) {
vBlob = (BLOB) rs.getBlob(1);
System.out.println("Taille 1 : "+vBlob.length());
connection.close();
} catch (Exception e) {
e.printStackTrace();
return vBlob;
public static void main(String[] args) throws Exception {
BLOB vBlob = getBLOB(1, "jdbc:oracle:thin:@vdn-ceg5:1521:DEV5");
System.out.println("Taille 2 : "+vBlob.getLength());
}When I run the main method, I have :
Taille 1 : 150260
Taille 2 : 86
!!!!????!!!!????
Thank you, but I think I have a Java problem...
Here is my code :
package zip;
import java.sql.*;
import oracle.jdbc.OracleDriver;
import oracle.sql.BLOB;
public class ReadBLOB {
public static BLOB getBLOB(int aId, String aJDBC) {
BLOB vBlob = null;
try {
DriverManager.registerDriver(new OracleDriver());
Connection connection = DriverManager.getConnection(
aJDBC,
PreparedStatement stat = connection
.prepareStatement("select image from aa_blob where id="+aId);
ResultSet rs = stat.executeQuery();
if (rs.next()) {
vBlob = (BLOB) rs.getBlob(1);
System.out.println("Taille 1 : "+vBlob.length());
connection.close();
} catch (Exception e) {
e.printStackTrace();
return vBlob;
public static void main(String[] args) throws Exception {
BLOB vBlob = getBLOB(1, "jdbc:oracle:thin:@vdn-ceg5:1521:DEV5");
System.out.println("Taille 2 : "+vBlob.getLength());
}When I run the main method, I have :
Taille 1 : 150260
Taille 2 : 86
!!!!????!!!!????
Passing variable from one JSP to another
Hi....
I am working on customizing Oracle Application(istore).
I need to pass variable from 1 JSP to another.
JSP 1 contains the following line of code:
<INPUT type="HIDDEN" name="soldtoCustPartyName" value="<%=soldtoCustPartyName%>">
How can I pass this to another JSP Page. The other JSP should take the 'soldtoCustPartyName' and find out the primary address country.
So please help me in getting variable passed from 1st JSP to next.
By default, 1st JSP is not fwded to 2nd JSP.
This is very very urgent...Please help.....
When you push the submit button on jsp1 - it goes to jsp2?
ie
// in jsp1.jsp
<form action="jsp2.jsp">
<INPUT type="HIDDEN" name="soldtoCustPartyName" value="<%=soldtoCustPartyName%>">
<input type="submit">
</form>
//Then in jsp2.jsp all you need is
request.getParameter("soldtoCustPartyName");This will pick up the value that is coming from the hidden field on jsp1
Passing variables from php to flash and the opposite
Hi guys, im trying weeks now to solve this problem but nothing yet
If someone could just tell me how to pass variables from flash to php and the opposite i would be thankful!!! Please help!
I have recently had to learn this, so this may not be the best way but it worked for me
I suggest looking at the code below stripping out everything you don't need (e.g. the databse stuff) and just get a simple string going back and forward
have a go and post any problems here and I'll try and help
in flash i have
private function getBalanceAndXP():void
var request:URLRequest = new URLRequest("utils.php");
request.method = URLRequestMethod.POST;
var variables:URLVariables = new URLVariables();
variables.func = "getBalance";
variables.fbid = userID;
request.data = variables;
var loader:URLLoader = new URLLoader();
loader.dataFormat = URLLoaderDataFormat.VARIABLES;
loader.addEventListener(Event.COMPLETE, onBalanceComplete);
loader.load(request);
private function onBalanceComplete(e:Event):void
var loader:URLLoader = e.target as URLLoader;
loader.removeEventListener(Event.COMPLETE, onBalanceComplete);
var variables:URLVariables = new URLVariables(loader.data);
_balance = parseInt(variables.balance); // class variable
_experience = parseInt(variables.experience); // class variable
public function setBalanceAndXP(balance:int, experience:int):void
_balance = balance;
_experience = experience;
var request:URLRequest = new URLRequest("utils.php");
request.method = URLRequestMethod.POST;
var variables:URLVariables = new URLVariables();
variables.func = "setBalance";
variables.fbid = userID;
variables.balance = _balance;
variables.experience = _experience;
request.data = variables;
var loader:URLLoader = new URLLoader();
loader.dataFormat = URLLoaderDataFormat.VARIABLES;
loader.load(request);
and then I have my php file
<?php
$func = $_POST["func"];
$fbid = $_POST["fbid"];
$balance = $_POST["balance"];
$experience = $_POST["experience"];
$numVariables = 0;
$link = mysql_connect("localhost","username","password");
mysql_select_db("databaseName");
if ($func == "getBalance")
getBalance($fbid);
else if ($func == "setBalance")
setBalance($fbid, $balance, $experience);
mysql_close($link);
function getBalance($fbid)
$query = "SELECT balance, experience FROM tableName WHERE fbid = '".$fbid."'";
$result = mysql_query($query);
$row = mysql_fetch_row($result);
writeVariable("balance", $row[0]);
writeVariable("experience", $row[1]);
function setBalance($fbid, $balance, $experience)
$query = "UPDATE tableName SET balance = ".$balance.", experience = ".$experience." WHERE fbid ='".$fbid."'";
mysql_query($query);
function writeVariable( $name, $value )
global $numVariables;
if ( $numVariables > 0 )
echo "&";
echo $name . "=" . urlencode($value);
$numVariables++;
?>
Passing variables from Applescript to bash
Hello,
I'm trying to pass variables from Applescript to bash using the following code
#!/bin/bash
osascript <<EOF
tell application "SystemUIServer"
set username to text returned of (display dialog "Enter your name" with icon caution default answer "" buttons{"Continue"})
set macname to text returned of (display dialog "Enter name of your Mac" with icon caution default answer "" buttons{"Continue"})
do shell script "export USERNAME=" & quoted form of username & " && export MACNAME=" & quoted form of macname
end tell
EOF
echo "USERNAME is $USERNAME, MACNAME is $MACNAME"
but no luck
Mac-mini:Downloads admin$./new.command
USERNAME is , MACNAME is
Any help would be greatly appreciated.
I just realized you are returning 2 variables. That can still be handled by echoing/printing the values, you just have to parse the output, or use other tricks.
VALUES=( $(osascript -e '...') )
This would make VALUES an array, with each array element containing one space separate return value from osascript
USERNAME=${VALUES[0]}
MACNAME=${VALUES[1]}
If USERNAME or MACNAME could have spaces in them, you would need to use some kind of separator character. For example if you use @ as the separator you could do something like:
VALUES=$(osascript -e '...')
USERNAME=${VALUES%@*}
MACNAME=${VALUES#*@}
which will %@* will delete everything starting with the @ til the end of the string, and #*@ will delete everything from the beginning of the upto and including the @.
Another trick is to have the return values be properly formed shell variable assignments such as
print "USERNAME='your user name' MACNAME='Your Mac Name' " -- I'm making this up as I do not really know Applescript, so you will have to figure out how to get Applescript to print something that looks like
USERNAME='your user name' MACNAME='Your Mac Name'
In your shell script you have code that looks like:
VALUES=$(osascript -e '...')
eval $VALUES
The eval will execute whatever is stored in $VALUES, and if that happens to look exactly like shell variable assignments, you get the variables created in the current shell context, where can use them.
Passing variables from Captivate to HTML
Hi All:
I am trying to figure out how to export system and user variables from Captivate to the html wrapper. What I need to accomplish here is very simple. I want to capture a quizz score and pass that number back to the html file. Can anyone out there help me with this?
I have been adding the following javascript code to my html file after publishing for testing:
<script type="text/javascript">
function SimpleTest()
alert('I can call javascript');
function ComplexTest(grade)
alert('The grade you passed was: ' + grade);
function ComplexAlternateTest()
alert('The grade you passed was: ' + GradeVar);
</script>
I have successfully tested the first function SimpleTest() so I know that Captivate can communicate with the html file. However, I have not been able to successfully pass any system or user variables to either of the other two test functions. I suspect that I am not getting the syntax correct in the javascript call in Captivate.
My approach has been to use execute javascript in the on slide exit. I have also tried creating an advanced action that stores a system variable to a user defined variable and then tried sending the user define variable with no success. In the javascript popup window I have been putting ComplexTest(variablename); . I don't know if this is the correct syntax or not?? I have tried using the cpQuizInfoPointsscored system varialbe with and without the $$ signs and I have tried using {score} on the quiz results page. So far no luck. I always get a "variable not defined" error message.
Sorry for the lengthy message but you would think that something this simple would be more straight forward, but apparently it is not. Thanks in advance for your help.
Vernon . . .
Hi Vernon,
I'm not a JavaScript ninja so I can't answer your question. However take a look at Philips site here http://pipwerks.com/
He has a lot of interesting stuff in regards to Captivate and JavaScript integration so hopefully you can find the answer on his site.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.
Passing variables from AS3 to PHP
Hi there
I am having some trouble in passing variables from AS3 to PHP. I am using flash and php both in the same file [try.php].
I've stuck with this for two days.. Here's what I have done. Please help!!!
header.fla [Actionscript in the timeline]
stop();
import flash.events.Event;
import flash.display.Sprite;
import flash.net.*;
var url:String = "http://localhost/0000/try.php";
var req:URLRequest = new URLRequest(url);
var loader:URLLoader = new URLLoader();
var variables:URLVariables = new URLVariables();
send_btn.addEventListener(MouseEvent.CLICK, sendForm);
function sendForm(evt:MouseEvent):void
// add the variables to our URLVariables
variables.asd = "value";
// send data via post
req.method = URLRequestMethod.POST;
req.data = variables;
loader.dataFormat = URLLoaderDataFormat.TEXT;
// add listener
loader.addEventListener(Event.COMPLETE, onLoaded);
loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
//send data
loader.load(req);
function onLoaded(evt:Event):void
var result_data:String = String(loader.data);
if (result_data)
trace(result_data);
else if (!result_data)
trace("error");
function ioErrorHandler(event:IOErrorEvent):void
trace("ioErrorHandler: " + event);
try.php
<body>
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="563" height="280">
<param name="movie" value="header.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="../Scripts/expressInstall.swf" />
<!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="header.swf" width="563" height="280">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<param name="expressinstall" value="../Scripts/expressInstall.swf" />
<!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
<?php
if($_POST['asd'])
echo "value of var1 is <b>".$_POST['asd']."</b>";
else
echo "bad luck";
?>
</body>
BIG THANKS!!
the problem is nothing your showed. did you see a security warning that you ignored?
to test, if that's the problem go here and adjust your security settings: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml
if that fails, upload your files to a server and confirm everything works. then start working on your local configuration.
Passing variables from Report to Form
Hi, I need pass a couple of variables from the REPORT to two fields in the FORM for save in a table. Somebody knows how do I do this?. Any suggestions?
Thanks a lot!
I think that this situation is different that pass variables from FORM to REPORT.
You need to use a Link component to your Form that you then attach to one of the data columns in the Report. When you edit the link in the report, you can specify the fields to pass.
How to pass arguments from PAPI to the process
Can any one tell me How to pass arguments from PAPI to the process.
The link Creating a new work item instance in a process using PAPI shows how to create instances on PAPI and pass in the variable information as they are being created.
Provide some additional detail if you're interested in seeing how to pass in variable information using PAPI for scenarios other than instance creation.
Dan
Is possible work with boleto from SmartForm using the Tcode FBZP ?
HI,
SAPScript bar code output in PDF format
As a SAP does not intend to deliver this solution for SAPscript because The report - RSTXPDFT4 does not work correct to bar code in the boletos (Brazil) when convert to PDF, we are going to change to Smart Form.
The problem now.....Does someone know if is possible use this boleto from SmartForm using the Tcode FBZP ?
Here in the customer there were a lot of problems about bar code (Critical) and in the past the Basis consultant had problems to import all Basis Support Packages and kernel patches in Release 4.6C.
if someone can help me, I really apreciate.
Since now....Thank you !!!!!!
Best regards,
Hello!
SAP doesn´t have a SMARTFORM for boleto. We're sorry, but you can´t put a barcode on a SMARTFORM for the boleto in the standard system.
REgards,
Renan Correa
How can I pass variables from one project to another using Javascript?
Hi all, I am trying to do this: let learners take one course and finish a quiz. Then based on their quiz scores, they will be sent to other differenct courses.
However, I wish keep track on their previous quiz scores as well as many other variables.
I found this nice widge of upload/download variables by CPguru (http://www.cpguru.com/2011/05/18/save-and-load-data-widget-for-adobe-captivate-4-and-adobe -captivate-5/). However, this widget works by storing variables from one project in local computer and then upload it to another project.
My targeted learners may not always use the same computer though, so using this widget seems not work.
All these courses resided in a local-made LMS which I don't have access to their code. Therefore, passing variables to PHP html files seems not work.
Based on my limited programing knowledge, I assume that using Javascript to pass variables may be the only possible way.
Can someone instruct me how to do this?
Thank you very much.
If you create two MIDlet in a midlet suite, it will display as you mentioned means you can't change the display style.
Passing variables from .bat to .sql in instance creation scripts
Hi all,
In the classical instance creation scripts numerous parameters are repeated even if they are similar. For example, the directory into which saving the different tablespaces is often the same. Also i'm looking for passing them as parameters from the .bat launching the instance creation. My first tries give the following:
-> In the .bat launching the creation:
set MY_DB_USER=sys
set MY_DB_PWD=change_on_install
set MY_DB_NAME=DragNFly
set ORACLE_SID=DragNFly
set MY_DB_CREATION_SOURCE=F:\Oracle\oradata\Instance_creation_scripts
set MY_DB_CREATION_DESTINATION=E:\Oracle_DragNFly
set MY_ORACLE_BIN=F:\oracle\bin
set MY_ORACLE_HOME=F:\oracle
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SID%\bdump
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SID%\cdump
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SIDD%\create
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SID%\udump
mkdir %MY_DB_CREATION_DESTINATION%\%ORACLE_SID%
%MY_ORACLE_BIN%\oradim.exe -new -sid %ORACLE_SID% -startmode m
%MY_ORACLE_BIN%\oradim.exe -edit -sid %ORACLE_SID% -startmode a
%MY_ORACLE_BIN%\orapwd.exe file=%MY_ORACLE_HOME%\Database\PWD%MY_DB_NAME%.ora password=%MY_DB_PWD%
%MY_ORACLE_BIN%\sqlplus /nolog connect %MY_DB_USER%/%MY_DB_PWD% @%ORACLE_SID% as sysdba
%MY_ORACLE_BIN%\sqlplus /nolog @%MY_DB_CREATION_SOURCE%\StartCreation.sql
-> Then in the first sql file, fixing all the variables and calling the other ones:
DEFINE MY_DB_USER=SYS
DEFINE MY_DB_PWD=change_on_install
DEFINE MY_DB_NAME=DragNFly
DEFINE MY_DB_SID=DragNFly
DEFINE MY_DB_CREATION_DESTINATION=E:\Oracle_DragNFly
DEFINE MY_DB_CREATION_SOURCE=F:\Oracle\oradata\Instance_creation_scripts
DEFINE MY_ORACLE_BIN=F:\oracle\bin
DEFINE MY_ORACLE_HOME=F:\oracle
connect &&MY_DB_USER/&&MY_DB_PWD as SYSDBA
-- # The following files have to be stored in the #
-- # same repertory as the present file #
@@CreateDBdb &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@CreateDBtbs &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@CreateDBcat &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@postDBcreate &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@CreateDBuser &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
exit;
-> Finally one example of use in CreateDB.sql is:
connect &&1/&&2 as SYSDBA
set echo on
spool &&5\&&3\Create&&3.db.log
startup nomount pfile="&&6\init_DB.ora";
CREATE DATABASE &&3
MAXINSTANCES 1
MAXLOGHISTORY 1
MAXLOGFILES 5
MAXLOGMEMBERS 3
MAXDATAFILES 100
DATAFILE '&&5\&&3\system_&&3.01.dbf' SIZE 200M REUSE AUTOEXTEND ON NEXT 10M MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
DEFAULT TEMPORARY TABLESPACE &&3._TMP TEMPFILE '&&5\&&3\temp_&&3.01.dbf' SIZE 1500M REUSE
UNDO TABLESPACE "&&3._UNDO" DATAFILE '&&5\&&3\undo_&&3.01.dbf' SIZE 500M REUSE
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 ('&&5\&&3\redo_&&3.01.log', '&&5\&&3\redo_&&3.01bis.log') SIZE 102400K,
GROUP 2 ('&&5\&&3\redo_&&3.02.log', '&&5\&&3\redo_&&3.02bis.log') SIZE 102400K,
GROUP 3 ('&&5\&&3\redo_&&3.03.log', '&&5\&&3\redo_&&3.03bis.log') SIZE 102400K;
spool off;
As you can see a first problem is that i have to set the variables the first time in the .bat and a second time in the first .sql. I don't know how to use an unique file for setting all the variables i need.
Second difficulty is: fixing names and directories is a first step but i would like to fix all the different size values in this same file. The goal is to have only one file with dozen of values to change before creating new instances instead of checking all the different parameters inside of the different files.
Third problem: variables are not transmitted to the init.ora. I think that it's possible to generate it using template and the defined variables, but i don't try for the moment.
What is your mind on this?
Probably there are better examples that i don't found?
Regards,
Tif
the problem is nothing your showed. did you see a security warning that you ignored?
to test, if that's the problem go here and adjust your security settings: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml
if that fails, upload your files to a server and confirm everything works. then start working on your local configuration.
Maybe you are looking for
-
Dear All, we have one report. if i run the report then it will take 2 to 4 hrs. I have checked main query & formula columns, all the query reading the index. How can i Tune this report & how can reduce the running time. Pls help me.
-
Does anyone know what code 43 is?
does anyone know what code 43 means ipod isn't being recognized by computer or docking station and wont charge only in sleep mode?
-
Update error in BAPI_SALESORDER_CHANGE
Hi, I have to add new line items to the existing sales order, so I have created a BDC for t-code VA02, when I run the program after I save the Sales order I got update error which says "Item status (document 2123455, item 20) is missing". Then I con
-
Hi, I am looking at an XML file/feed, and within it there are paragraphs and page breaks (<para>, ). When I'm extracting the data into a varchar2 field, i want to preserve the paragraph/break structure... e.g. SELECT text_col FROM XMLTABLE('/'
-
Problems to differentiate between attachments and embedded in an email
In my code i have something like that to verify if the attachment is embedded or not: public static bool IsEmbeddedAttachment(Outlook.Attachment attachment) //Anexos que não são embedded são obrigatóriamente olByValue, porém os embedded podem ser de