Is it possible to purchase the same song multiple times with iTunes?

Now that I have purcahsed a good deal of songs thru itunes it is difficult to keep track of what I have already bought. Will itunes alert me to songs that I have already purchased if I try to buy them again? I know I can keep checking back in the "Purchased Music" playlist but this takes a lot of clicking back and forth. Is there an easier way?

If you try to buy a song you have already bought, it should pop up a warning and say you have done so. You can ignore the warning and buy the song anyway, however.
Note that this only works for the same exact version of the song. If you have a different version, like the clean/explicit difference, you get no warning.

Similar Messages

How do i purchase the same song for a different itunes library on my computer?

How do I purchase the same song for a different itunes library on the same computer?

and then they will be sorted in the correct order.

Running the same code multiple times with different paramters automatically

Hi guys,
I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
X_Intial, X_Final, X-StepSize
Y_Intial, Y_Final, Y-StepSize
Thanks,
Dushyant

All you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
Attachments:
Cluster Array.JPG ‏9 KB

Is it possible to copy the same database multiple times simultaneously?

This is the setup of my environment.
I have a 'master' database that contains the full schema plus some pre-populated data such as default settings. When database schema changes are made, they get made to the master database. When a new customer signs up for the service, I make a copy of this
master database (using SMO) that will now be the database containing all of the customer's information. The database is rather large, and the copy operation can take a couple minutes.
Everything works fine as expected, unless I try to provision two new customers at the same time. It appears that Azure only allows for one DB copy operation at a time. Is there a way to allow for copying the same database multiple times simultaneously?
Thanks for you input. I understand that this is likely not the optimal setup, and that there is many better ways of doing this, but I am somewhat heavily invested in the current process and I would like to find out how to make it work if I can.

BTW, you can do this programatically by using PowerShell (https://msdn.microsoft.com/en-us/library/ee210569.aspx), SqlPackage (http://www.benday.com/2012/12/18/deploy-a-sql-server-database-projects-dacpac-with-sqlpackage-exe/)
or the SQL Server binaries for .NET (http://www.vijayt.com/Post/Deploying-a-data-tier-application-in-SQL-Azure-programatically)
Hope this helps.
Alex

My "unrated songs" smart playlist plays the same song multiple times

I recently started using iTunes match, and was excited to have my smart playlist that contains songs I haven't rated yet sync from my MBP to my iPhone 4S. While I'm playing that playlist, I rate each song as I listen to it, but after it ends, it's replaying it. I have to hit skip sometimes 4 or 5 times before it will go to a new song in the playlist. Any ideas about what's causing this or how to fix it? Thanks!

Hello there, greenstreetm.
The following Knowledge Base article provides some practical steps to use when troubleshooting an application stops responding:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

COUNT the same column multiple time with 2 different condition

Hi everyone,
I have a small query but I don't find the answer. Can anyone help me with this one ? Look at this example:
WITH T AS (
SELECT 'a' as Name, 1 as v FROM DUAL
UNION ALL
SELECT 'a' as Name, 2 as v FROM DUAL
UNION ALL
SELECT 'a' as Name, 2 as v FROM DUAL
    UNION ALL
SELECT 'b' as Name, 1 as v FROM DUAL
    UNION ALL
SELECT 'b' as Name, 1 as v FROM DUAL
    UNION ALL
SELECT 'b' as Name, 2 as v FROM DUAL
) SELECT DISTINCT name,
         COUNT(DECODE(v, 1, 1, null)) OVER (PARTITION BY name ORDER BY v) as v1,
         COUNT(DECODE(v, 2, 1, null)) OVER (PARTITION BY name ORDER BY v) as v2
    FROM T
ORDER BY 1;This returns :
NAME V1                     V2
a    1                      0
a    1                      2
b    2                      0
b    2                      1                      But what I need is only one row with the count of 1 and 2 by name. How can I achieve that without using subqueries like (the following query returns the correct output)
WITH T AS (
SELECT 'a' as Name, 1 as v FROM DUAL
UNION ALL
SELECT 'a' as Name, 2 as v FROM DUAL
UNION ALL
SELECT 'a' as Name, 2 as v FROM DUAL
    UNION ALL
SELECT 'b' as Name, 1 as v FROM DUAL
    UNION ALL
SELECT 'b' as Name, 1 as v FROM DUAL
    UNION ALL
SELECT 'b' as Name, 2 as v FROM DUAL
) SELECT DISTINCT t.name,
         (SELECT COUNT(*) FROM T z WHERE z.name = t.name and z.v = 1),
         (SELECT COUNT(*) FROM T z WHERE z.name = t.name and z.v = 2)
    FROM T t
ORDER BY 1;The table I'm working on has millions of records and with subqueries it takes ages to executes. The one with analytical function takes less than 3 sec.
Thanks for your help!

Hi,
user13117585 wrote:
Hi everyone,
I have a small query but I don't find the answer. Can anyone help me with this one ? Look at this example:
WITH T AS (
SELECT 'a' as Name, 1 as v FROM DUAL
UNION ALL
SELECT 'a' as Name, 2 as v FROM DUAL
UNION ALL
SELECT 'a' as Name, 2 as v FROM DUAL
UNION ALL
SELECT 'b' as Name, 1 as v FROM DUAL
UNION ALL
SELECT 'b' as Name, 1 as v FROM DUAL
UNION ALL
SELECT 'b' as Name, 2 as v FROM DUAL
) SELECT DISTINCT name,
COUNT(DECODE(v, 1, 1, null)) OVER (PARTITION BY name ORDER BY v) as v1,
COUNT(DECODE(v, 2, 1, null)) OVER (PARTITION BY name ORDER BY v) as v2
FROM T
ORDER BY 1;But what I need is only one row with the count of 1 and 2 by name. How can I achieve that without using subqueries Use the aggregate COUNT function instead of the analytic COUNT:
SELECT   name,
          COUNT(DECODE(v, 1, 1, null)) as v1,
          COUNT(DECODE(v, 2, 1, null)) as v2
     FROM T
GROUP BY name
ORDER BY name;

Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ???

Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ??? Then sync them to mine? When I sign her phone into her account I get a message warning that if I sync the dogs on her phone will be replaced by the ones in the library! But as there are no songs there I'm reluctant to continue!!! Please help this non techi guy.!!!!!

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why is Apple TV showing the same computer multiple times for Home Sharing?

Why is my Apple TV showing the same computer multiple times for Home Sharing? Also have connectivity issues. Sometimes will lose signal.
JonRod's music
JonRod's music
JonRod's music
JonRod's music
JonRod's music
I recently updated to Yosemite and never had this issue before.

I'm not 100% sure of the ins and outs, but it's some sort of known issue between Yosemite, Airport and wifi. All you can do is wait for a fix and keep restarting your equipment as and when needed, unless you have the ability to connect your Mac via ethernet.

Can I gift the same app multiple times to multiple users?

Can I gift the same app multiple times to multiple users?
Like, if I wanted to buy iMovie for 3 friends, could I buy the app as a gift 3 times?

You should be able to gift it multiple times
Gifting content : http://support.apple.com/kb/HT2736

TS3276 how do I get Mail to stop downloading the same email multiple times?

My mail keeps downloading the same email multiple times. I've had as many as 10 of the same emial. How do I stop this?

Me too - did you ever figure it out?
You can't even delete from the server in mountain lion.... I did it from my old mac, but it didn't work. I keep having 11,000 new emails that can not even be deleted in blocks!!!
Was it a gmail account? Mine is, and my other 2 are fine...

How to automate saving the same image multiple times?

Hello. I wish to save the same image multiple times in a folder... is there a way to automate this function? I also need the flexibility of determining the starting number in this image sequence. Thanks.

Good day!
I would recommend asking for help over at
Photoshop Scripting
And going into more detail about what you want to achieve (maybe post a screenshot, diagram, mock-up to illustrate it).
Regards,
Pfaffenbichler

What if i accidentally purchased the same song twice?

i just purchased some songs with a gift card & just noticed that i've got the same song twice! not sure how it happened--it's happened before & i was wondering what to do about it....can you get the money back for that? thanks lots!

Hi, sarabette.
I would recommend reporting a problem with the purchase via the steps in the article below. You can either do this via the email invoice received or by accessing your purchase history.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/ht2727
Cheers,
Jason H.

When my ipod is plugged into my computer music disappears, sometime it tries to upload songs, clears my playlists, and can't locate the songs files. All the same songs are in my Itunes library on my computer. What can i do?

When I plug my Ipod into my computer it shows all my songs on it as reloading onto the device,
and sometimes it can't locate the files or they are just gone. All my songs are in my Itunes library
on my computer, and I do have it in my settings not sync the Ipod with my computer so I can
manage the content myself. It has happened multiple times.
I have cleared my Ipod off as well as my computer, and put all the music back on without seeing
any improvement. And as of today when I tried again it shows some songs on there but with 3 copies
of the same song trying to upload onto my ipod. And have of my playlist where empty. I am getting
frustrated and don't know what to do. Help.

See these previous posts on dotted circles
https://discussions.apple.com/message/20813679#20813679
https://discussions.apple.com/message/20792130#20792130
https://discussions.apple.com/thread/5524609?tstart=0
https://discussions.apple.com/thread/4643160?start=15&tstart=0

It plays the same song all time

My Ipod Nano repeats the same song, even if I choose the randow play .

This is the iPod touch forum. I requested that your post be moved to the iPod Nano forum.

Shuffle updates the same songs every time

this is a problem i've had with the shuffle from 1.0 and itunes 5 and persists even with the latest update and itunes 6.... basically it has 3 songs that it thinks need to be updated when i plugin the shuffle. if i eject and re-insert it, itunes copies the same 3 songs again. at every re-insert the same thing keeps on happening. deleting the songs and copying them over again doesn't solve the problem.
if i completely factory reset it, and load it up with songs, it'll pick anything from 1 to 3 songs to continually update at every insert.
anyone know the cause?
(i have the 1gb shuffle, disk use set to 102mb, itunes reports 112.3mb free)

anyone one else with that problem at all or perhaps possible solution??

Is it possible to purchase the same song multiple times with iTunes?

Similar Messages

Maybe you are looking for