Is it possible to rearrange the order of SAP STD Selection Screen?

Hi.
Is it possible to rearrange the order of SAP STD Selection Screen?
Example:
IW69 has Location data selection at bottom of screen.
Is it possible to move that to top of the selection screen?
We are on ECC6.0.
Thank you,
Brett.

Hello Brett
You may try to use GuiXT:
[Adjusting Transactions Using GuiXT|http://help.sap.com/saphelp_sm32/helpdata/en/89/91b9db194f11d5b3a30050dae02d7c/content.htm]
Regards
Uwe

Similar Messages

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

Is it possible to change the order of the fields in the int table?

Hello
Is it possible to change the order of the fields in the int table?
Lets say itab has the following fields :
F1, F2, F3
I would like to see it as F2 F3 F1
Thanks

>
Comandante Che Guevara wrote:
> Lets say itab has the following fields : F1, F2, F3
>
> I would like to see it as F2 F3 F1
What do you mean by "like to see" ? You can WRITE the fields in any order you want. If you want to display the internal table in an ALV you can manipulate the fieldcatalog.
If you want something else other than display the field, you have to explain your req. in detail.
BR,
Suhas

I have a new MacBook and I'm having trouble with the help section. I would like to rearrange the order of my photos with in an Event, how do I do this? I follow the directions but it will not work. Thanks for some tips.

I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing? Thanks for any tips.

Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!

ITunes 10.6.3 keeps generating incomplete downloads AND it rearranges the order of the playlist when I burn a playlist to an mp3 cd

iTunes 10.6.3 keeps generating incomplete downloads AND it rearranges the order of the playlist when I burn a playlist to an mp3 cd.
I purchased an album on iTues from my MAC book Pro & the song downloads were incomplete. The song length shows correctly in the column, but they cut off between 1/4 & 1/2 way through the songs. Now, I dwonloaded it on my iPhone 4 through my itunes account after the purchase & the songs play fine. This happened with the very next song I purchased, as well.
I got around this issue, then created mp3 versions of all the songs, put them in their own playlist, then "Burned an mp3 disc." When it completed, the songs were in a different order.
Are there any fixes for either of these problems/bugs?

iTunes: How to set the play order of songs on an MP3 CD - http://support.apple.com/kb/HT2455

Possible to Change the Order Status

Hai
When i am booking the sales order the status is showing the Booked is it possible to change the Booked status according to the customer requirement ....
thanks in advance
M.Meenashi Sundaram

Hai its possible to change the order status from the
setup>quick codes>order management>
type --flow status
we can able to change it
thanks
M.Meenashi Sundaram

How do I rearrange the order of my pages in my document?

How do I rearrange the order of my pages in my document using the Pages Program?

Pages (or Word, come to that) don't work like that, because the "page" is not fixed - it will vary depending on what content it has. A PDF has fixed pages, and you can rearrange the pages of a PDF in Preview by dragging thumbnails in the thumbnail drawer. If you want to rearrange content in your Pages document, you have to cut and paste the content to where you want it.
Matt

How do I rearrange the order of items in a reminder list?

How do I rearrange the order of items in a reminders list?

ICal Reminders won't sort on the actual device it was intended for - the Iphone
I just talked to Apple Express service over this problem. I went to the trouble of transferring my to-do list onto icloud Reminders - where each item asked for a priority ranking and where you are then given options for how to sort all the Reminders you entered - so that it can actually be useable as any Calendar/time management system would be. I chose "by priority" of course, but you can also choose alphabetically, etc. It must be said, at least to Apple, apparently, that the point of doing all this is so that the Reminders are available on your actual device - my iphone. The Reminders all synced immediately to the Iphone. However, the Reminders list is an unsorted jumble on my iphone. Even when I tap out a Reminder on my iphone itself and choose a priority, the item remains at the bottom of the list as the last thing I typed in. Apple Express Support "explains" that the priority ranking and the sorting choices are "not supported" on the device you want to use them on - the iphone. They offered me "an article" that explains this in detail. In other words, engaging with the Reminder function and choosing priorities and choosing sort orders is all just a cruel joke wasting your time. I would have been better off just printing off my Reminders list on paper and circling the high priority items in red ink. Oh - but you can't print it out either.
Unbelieveable. Apple's ICal Reminder function actually and actively leads you to engage with completing details and choices that don't even function, or in other words - aren't "supported" on the Apple device they are stated to be designed for. Is there a device on which this function is actually supported? "Not at this time"
The only way to have your to-do list sorted on the iphone is to assign a calendar date for each one of them and then they only appear on that specific date. You would not be able to view your whole list in anything other than the order you happened to enter the items. No calendar/time management system I know of makes you put a date on every item in a task list - some tasks have a due date, but most don't. And every calendar/time management system allows you to sort your list, or view your list in a sorted order. And print it out also.
Apple advertises this Icloud Ical/Reminders system as a time managment tool and fails to tell us that vital functions don't even work on your iphone.

ADDRESS_INTO_PRINTFORM - Is it possible to chose the order of line output ?

Hello,
I use this FM - ADDRESS_INTO_PRINTFORM, that provide me am output format for address.
The output is:
lineo
line1
line2
line3 etc etc
Is it possible to chose the order output ? I mean, first line0, after line1, after line4, after line3, etc etc ??
Tks.

Hi,
You can influence the address returned by ADDRESS_INTO_PRINTFORM. You would need to create and address layout in the customer range (900 to 999) and assign this to the required country in config. Then use the user exit EXIT_SAPLSADR_001 to apply your own formatting.
Regards,
Nick

Related Topics: Is it possible to change the order of topics?

Hi,
Is it possible to change the order of Related Topics? I need
to change the order of topics (that is, I don't want the topics
alphabeticized.)
Thanks,
FMnRH

Hi FMnRH
Yes, you may change the order. If you have already inserted
the control, double-click it to edit it. Then click the Topics tab.
Click to select the topic you wish and below that, the area lists
the topic name. The field is labeled "Title". So you click in the
field and prefix the title with 1. or 2. to force the order you
want.
If you don't wish to prefix, you will have to manually edit
the HTML code. But it is possible.
Cheers... Rick

Is it possible to change the order of the files from the newest to the oldest ?

is it possible to change the order of the files from the newest to the oldest ?

View->Sort, or use the A/Z icon on the Toolbar at the bottom of the grid (press T if it isn't showing)

Can I rearrange the order of photos in an event or slideshow?

I want to rearrange the order of photos in an vent, or slideshow. Can I do this??

Actually, you can do this if the date is sequential. I have 35K of photos, and 280 events. They are sorted by date, using year, month, and sometimes day as the title. If it is more specific, I use year,month,trip information, for example.

How can I rearrange the order of pictures within a folder

I have an 8310 and all of the pictures are stored on a media card. The pictures are all within one folder. I want to rearrange the order of the pictures within the folder. When looking at the pictures they are in rows of 3. I want to move picture #9 to position #1 within the same folder. I've read all the help topics and have not been able to accomplish this.
Any help would be appreciated.

Go to your photoshop.com website. Log in if needed. Click on "Online Tools." Choose "Photoshop Express Organizer." Click and drag photos into the order you want.
Captions might best be added in the Elements Editor Organizer (99jon is correct) by double-clicking on thumbnail to make a full screen image, then a line appears under the photo and asks you to print your caption there. Sync it with your online website.
Bill

Rearranging the order of the pages

How do i rearrange the order of my pages? they seemed to be clumped in groups and i would like them as individual pages so that i can move them around. every time i try to put in a page break or section i get more blank pages and it still will not let me move pages.
thanks.

What version of Pages on Mac or iOS?
You need Section Breaks not Page Breaks and there can be several reasons why you are getting extra 'blank" pages, most are because they are not blank but have some invisible text on them:
Menu > View > Show Invisibles/Layout
Peter

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

Is it possible to rearrange the order of SAP STD Selection Screen?

Similar Messages

Maybe you are looking for