Is it possible to use charecterestic used in formula variable

Got a boolean logic in a formula of the  structure in BEx, i could create a formula variable for date , it works .However, i have to bring payment method into the logic ,( e.g.. if the payment method is 'C'-weekly then late payment logic is different then if it is not weekly) , Any idea how to achieve this in BEx.

You could create a key figure that always displays a fixed value example 1.
You then restrict this individual key figure to payment method C.
The key figure is now only 1 for payment method C.
In your calculation you now say: if key figure = 1 then ... else ...
If statements are not directly possible, you can only do if statemements indirectly by a similar formula:
(key figure = 1) * value
if key figure is one -> result of (key figure = 1) is 1
1 multiplied by value = value
if key figure is not one -> result of (key figure = 1) is 0
0 multiplied by value = 0
You now have an indirect if clause.
Please assign points if this solved your problem,
Best Regards,
Filip

Similar Messages

  • Report Painter - Use of Constants / Local Formula Variable

    Hi,
    I am using constant and/or local formula variable in report painter in FSI.
    I could use both the values for calculating percentages, ie. it can be used for multiplication or division. However, when I try to use it for addition or subtraction, I am getting the error message no. KH206.
    In all cases, I am using different values in the formula, i.e. a absolute figure and a GL based figure.
    I am not able to understand, why it even allows me for calculating percentage.
    Can anyone help me in using a absolute figure for input and thereafter use it in addition / subtraction.
    I would prefer an immediate solution to this as I am in the final stages of this report.
    Full points guaranteed.....

    Hi Kash,
    Thanks for your reply..
    Can you elaborate bit further. You mean to say I should create a Constant with some value.
    Thereafter how should I bring that in the form. But, How do I enter the Constant in the Formula... There is no key for entering any text in the formula.. there are only ID (the values which we bring in the form and which can be selected for the formula) and numbers which can be entered.
    So how do I enter the name of the Constant?
    I tried just keying in the name of the Constant, and I could check the formula also, However, while saving the form, I am getting an error,
    Element WCaplimit Bis letztem ATag bis &$BISD is not defined correctly -> check definition
    Message no. KH206
    Diagnosis
    In element WCaplimit Bis letztem ATag bis &$BISD the system adds quantities and values or different currencies.
    Can you please revert back with step by step solution?
    Appreciate your prompt reply.... Thanks

  • I wish to export several still images from iMovie as JPEG or TIFF. Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to add a freeze frame to extract the desired frame but I can't export it. Thanks.

    I wish to export several frames from iMovie as if they were images (like JPEGs or TIFFs). Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to 'add a freeze frame' to isolate the desired frames but I can't export it. Thanks.

    Ach... I found a solution thanks to previous posts which came to light after I'd posted what was obviously a question that had been asked before.

  • How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    Is there a reason you can't connect your iPhone to the same Wi-Fi network as your iPad?

  • Is it possible to skip the use of a router to get wireless from imac to macbook? (both osx10.5.8)

    Current setup is my imac (osk 10.5.8) is plugged into my dlink router. Wife gets her connection for her macbook (aslo osx 10.5.8) wirelessly from the router.
    Is it possible to skip the use of a router? That is, plug the ISP's inbound cable to my mac and somehow my wife's macbook be able to wireless connect to my iMac?
    Just looking to get around the router that is a possible cause for slowness.

    Some sort of router is needed for both of you to share the cable service. Is the router yours or part of the cable modem provided by the cable company? If the latter ask the cable company to service the device to be sure everything is working properly. If you have a separate modem and the router is yours, then replace it.
    Why do you believe your wireless is slow?
    I would also consider upgrading your computers' OS X.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • Is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license

    is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license
    Sql fire is my machine
    Oracle is another machine
    When i connect sqlfire with oracle using DBsynchronizer It shows the error message as Wan is not supported for default license
    When i connect Sqlfie(my system) with oracle( another system) using JDBC Rowloader .nothing is happening after some time it shows the error like"time out for pool connection to archive database.When i increase the time out also nothing is happening.
    what is the reason for above two errors(I stated in the pragraph.)
    is it beacuse of wan netwrok not supported by default evaluation license?
    could you please explain?

    I don't think this has anything to do with a VMware product.

  • Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?

    Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?
    -My customer does not want to push NAC Agent installation on BYOD type of computers (non-managed by the company computers).
    -The requirement is to check for posture only company owned wired, wireless, and VPN connected Windows computers. The rest of the endpoints should be considered as posture incompliant, and limited access to the network should be allowed.
    -No certificates are used.
    -I’ve configured the required posture check, and it all works fine if a PC has NAC Agent manually installed (without ISE Client Provisioning). However, when I use a PC without NAC Agent, it is redirected to Client Provisioning Portal and is stuck there as Client Provisioning is deliberately not configured in ISE.
    -If I remove Posture Remediation Authorization Profile that does URL redirect, the posture does not work.
    -For now I'm testing it on wired endpoints.
    Is there a way to configure ISE to fulfill the listed above requirements?
    Any ideas would be appreciated.
    Thanks,
    Val Rodionov

    Everyone who finds reads this article,
    I'm answering my own quesiton "Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?"
    The answer is Yes.
    After doing research and configuration testing I came up with a solution, and it works fine for wired and VPN connections. I expect it to work on wireless endpoints as well.
    ISE configuration:
    Posture General Settings - Default Posture Status = NonCompliant
    Client Provisioning Policy - no rules defined
    Posture Policy - configured per requirements
    Client Provisioning (under Administration > Settings) - Enable Provisioning = Enable (it was disabled in my first test)
    Authorization Policies configured as regular posture policies
    The result:
    After successful dot1x authentication posture redirect happens. If the PC does not have NAC Agent preinstalled, the browser is redirected to Client Provisioning Portal and a default ISE message is displayed (ISE is not able to apply and access policy... wait one minute and try to connect again...). At the same time, the endpoint is assigned NonCompliant posture status and proper authorization policy is applied. This is what I wanted to achieve.
    If NAC Agent was preinstalled on the PC, after successful dot1x authentication the NAC Agent pops up and performs posture check. If posture is successful, posture compliant authorization policy is applied. If posture check fails, NonCompliant posture status is assigned and posture non-compliant authorization policy is applied. Which is the expected and needed result.
    The only part that is not perfect it the message displayed to the end-user when posture is about to fail. I did not find a place to change the text of that message. I might need to open TAC case, so this file can be manually found and edited from CLI (root access).
    Best,
    Val Rodionov

  • Is there a way to make a video call from my iPhone 4 to a non apple phone? Also is it possible to transfer pics using bluetooth from iPhone to other company mobiles? Its a great phone but sometimes I feel struck inside it.

    Is there a way to make a video call from my iPhone 4 to a non apple phone? Also is it possible to transfer pics using bluetooth from iPhone to other company mobiles? Its a great phone but sometimes I feel struck inside it.

    You'd need an app like Skype to video call with other phones.
    Data transfer is not supported via bluetooth and iphone to iphone is not supported at all.

  • Is there any possible way I can use the keyboard controls/shortcuts of Microsoft on the Mac version or PhotoShop?

    I am very used to using a PC for Photoshop and just recently changed to Mac. I tried plugging in a different but the keyboard shortcuts arent like Windows version

    shldr2thewheel wrote:
    Since you have a mac, learn how to use Photoshop for Mac and stop thinking about Windows.  Time to let go and learn how to use programs for Mac.
    This is pretty horrible advice. 95% of Photoshop works the same on Mac and PC. Almost all of the keyboard shortcuts are identical except that Ctrl becomes Command and Alt becomes Option (same key anyway). The menus are all the same.
    shldr2thewheel wrote:
    Also, when using PS on a Mac, their is no option to enable "windows keyboard mode" in OS X. I know, I have used PS on a PC and currently use it on a Mac.  You have no option but to learn how to use it on a Mac.  If you are comfortable with Windows, purchase a copy of Windows and run it in Boot Camp or a virtual machine and purchase a copy of PS for windows. Then when in Windows, I believe you can use MS shortcuts.
    This is also (mostly) incorrect advice.
    If you look in the Keyboard system preference, and you click Keyboard Shortcuts, you will find a shortcut called "Move focus to the menu bar." Once this happens, you can type ahead to menus and commands, much like the alt menu shortcuts in Windows. If you wanted to open the Duplicate command, it would be Ctrl-F2 to activate the menu bar (edit that shortcut if you don't like it), then type I and Enter to drop the Image menu, then type D and Enter to open Duplicate. If there were two D commands, you would type ahead until the letters are different. You can use the spacebar instead of Enter, and Esc does the same as Windows. I just tried all this in CS5 and it works fine. The advantage over Windows is that you do not need to memorize the alt shortcuts, because it's based on the command name you want instead of an arbitrary letter in the middle of the name.
    As jasdril said, you can simply edit the direct shortcuts too. But in most cases there should be no need to because as I said, most are the same anyway.
    In short, there is plenty of keyboard-driven flexibility there for anyone willing to adapt just a little tiny bit.
    The second advice that is not so good is recommending a Windows virtual machine. That'll slow down Photoshop, in addition to using up a lot of RAM and CPU that Photoshop really needs. The Mac version of Photoshop being native, would run at a proper speed.
    The last possibly bad decision in this thread is TTro787 deciding to take the Mac back to the store, ignoring a quarter century of history of the Mac as a well-established graphic design and photo workstation. If you don't think the Mac is going to work well for Photoshop, it isn't going to be because of the Mac... the Mac is not just for Starbucks posers. Too many smart scientists (who want to use the Unix-based OS) and competent designers use Macs.
    In short there is a whole lot of intolerance and assumed differences in this thread by both Mac and Windows zealots, which is too bad. Photoshop is mostly the same on Mac and Windows unless you're trying really hard to make it not work.

  • Is it possible to stop APEX using a cached query?

    I was hoping that the issue where report regions sometimes show the error: "ORA-06502: PL/SQL: numeric or value error: NULL index table key value" would be fixed in 3.1.1 however it seems not to have been (We have had it several times now). The workaround seems to be to change the query slightly such as selecting NULL as an additional column and then hiding that column.
    This obviously only works AFTER the issue has occured, ie, after we have received a complaint from someone!
    Is it possible to stop APEX using the cached version of some queries altogether? The ones we are calling are quite simple and so will not give that much overhead.
    Thanks.

    I've actually found several threads on this from the past:
    ORA-06502: PL/SQL: numeric or value error: NULL index table key value
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=644172&tstart=120 (This thread states the problem has been fixed however it would appear either it hasn't or there is a similar bug elsewhere.)

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • I have an ipod touch 4 gen.Is it possible for me to use the internet with bluetooth?

    I have an apple ipod 4 gen.Is it possible for me to use the internet using bluetooth?helpp!!!

    Yes but only to tether to an iPhone.  The iPhone must have the optional tethering data plan.

  • Hi, is it possible for me to use my irish Iphone 4 in canada with a canadian bill paid sim card?

    Hi
    Is it possible for me to use my Irish I phone 4 in Canada? I would like to get a Canadian bill paid sim card / local no for one year!

    If your phone is officially unlocked, yes. Otherwise, no. So, contact your carrier BEFORE you leave to see if they offer unlocking & what the cost/procedure is. There is no other way to get an iPhone officially unlocked...only the carrier an iPhone is locked to can authorize such.

  • Is it possible to connect database using session bean

    Dear all,
    Is it possible to connect database using session bean without using entity beans like cmp,bmp.
    if ur answer is yes, then pls tell me where to put the select statement and transaction attribute like(6 types).
    if u have sample code, then it is good for me.
    Hope I will get answer.

    Sure it is.
    Try something like this (and maybe get a book on JDBC):
    String name;
    try {
         InitialContext ic = new InitialContext();
         DataSource ds = (DataSource) ic.lookup(Constants.MY_DATASOURCE);
         Connection connection = ds.getConnection();
         String sql = "SELECT * FROM TABLE";
         PreparedStatement statement = connection.prepareStatement(sql);
         ResultSet rs = statement.executeQuery();
         while (rs.next()) {
              name = rs.getString("NAME");
         if (rs != null)
              rs.close();
         if (statement != null)
              statement.close();
         if (connection != null)
              connection.close();
    catch (NamingException e) {
         // Can't get JDBC datasource
         // ... do something with this exception
    catch (SQLException e) {
         // SQL exception from getter
         // .... do seomthing with this one too
    }

  • Is it possible LSMW recording method using multiple structures

    Hi,
    can any body tell me, is it possible LSMW recording method using multiple structures
    i,e using Header details one flat file structure and Item details another flat file structures

    Hi,
    Check this link..
    LSMW multiple structure migration

Maybe you are looking for