Is Possible to Merge Some Infotypes (10 infotypes) into One Infoprovider?

Hi All
I'm really confused with HR Model Data Design. Right now, I need to create report like this (using Bex Analyzer)
(PA0000,PA0001,PA0002)
Name:
Age:
Job Title:
Division:
Section
Date Joined (dd/mm/yyyy)
(another infotype)
Education
Lever | Start Date | End Date
Junior School | 1992 | 1998
Middle School | 1998 | 2001
(another infotype)
Career History
Prev Comp | Start Date | End Date
PT ABC | 2002 | 2003
PT XYZ | 2003 | 2004
My plan, first is to combine all of them into 0EMPLOYEE (become attribute of 0EMPLOYEE).
But this plan is fail because there was an error time overlap dependency.
Because of this, I separate them into DSOs (one DSO for one infotype). Now one thing that I confused is how to combine them into one InfoProvider (InfoCube/Multiprovider/InfoSet), because the key (Begin Date and End Date) are not sync one another.
The simple logic is build like this
Employee Id | Begin Date (PA0001) | End Date (PA0001) | Begin Date (education) | End Date (education) | Begin Date (contract) | End Date (contract) but the combination will be bombastic (the performance will be drop).
Could you anyone help me to solve this? Thank you
Regards,
Satria

Hi satria
I would try using expertroutine with ABAP code 'perform'
here an example:
http://abapreports.blogspot.com/2009/10/sap-programming-syntax-for-provide-in.html
gregards
Tom

Similar Messages

Merge two Livecycle PDF files into one PDF?

I have a new requirement where I need to take two different PDF forms I'm producing from LiveCycle and merge them together into a single PDF.
I have heard that Adobe Acrobat cannot edit LiveCycle files, does anyone know if it is possible to merge two Livecycle PDFs together into a single file?

Hello Clay,
This is not available in the standard SAP Interactive Forms by Adobe solution.
What I can recommend is:
Step 1: retrive the data back from the PDF files using the getData functionality of the ADS.
Step 2: Render a new PDF file. The template of this new PDF should contain the template of both original PDF files.
This should work if both of the original PDF files were created by the SAP Systems ADS.
Best regards,
Dezso

Is it possible to multiplexe 8 analog sensors output into one PXI4472 channel?? can PXI4472 recognize those signals??

I have around 64 analog sensors to connect to PXI4472. Instead of buying 8 PXI4472, is it possible to multiplexe 8 analog sensors output into one PXI4472 channel?? can PXI4472 recognize those signals??

Such a set up is not recommended. Some of the drawbacks are:
Depending on how you plan to multiplex the signals together (SCXI/PXI switch, 3rd party mux), you could very easily be introducing noise to your system.
Multiplexing the signals together into one line limits your sampling rate to the switching speed of you multiplexer device.
You will probably need to spend more time developing handshaking schemes in order for switching and acquisition to occur in such a way that you don't miss signals that you want to acquire.
These are only some of the drawbacks to this setup. All in all, the only functionality of the 4472 board that you would be left with is it's ability to sample all eight channels at the same time. So, you could multi
plex all the signals together, but doing so is not recommended.
However, I have a couple of questions. Do you want to sample all 64 sensors at the same time? Assuming that you are not, how are you planning on multiplexing the signals together? What kind of a chassis are you working with? Please let me know.
Logan S.

Is there a way to merge two apple id's into one?

Is there a way to merge two apple id's into one?

DBO501 wrote:
Is there a way to merge two apple id's into one?
This is not possible...
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Is there a way to merge two separate iTunes accounts into one?

Is there a way to merge two separate iTunes accounts into one? I don't want to "share libraries." I just want one account that once stemmed from two seperate accounts and has all of the purchases and history. Thanks for any help!

No.

How could i Integrate (merge) 2 different Controlling areas into one?

Hello gurus,
The client i am working for had defined, from the beggining (during SAP Implementation), one Controlling area for the entire company.
This definition was correctly done, as a way to centralize every operation and transaccion made.
After some years, this company merge with another one, that had the same implemented controlling model, but asociated to another Controlling area.
The problem is that we need to integrate both Controlling areas into one, in other words, every operation saved or transaction made linked to the new Controlling area (the one of the second company), must be converted to the code of the original one.
Is there an std. way to erase the second Controlling area and asociate all its records (saved in every table) to the orignal one, as if they were one from the very beggining?
Thanks very much!.
Pablo.-
Edited by: Pablo Lanzani on Jul 2, 2008 7:51 PM

Hi Daniela, thanks to you too.
If you or anybody have some specific documentation about 'SLO -- SAP Organizational Structure Changes -- Controlling area Merge' to send me while i continue looking, i will be pleased.
Thanks a lot anyway!
Pablo.-

HT204053 Can you merge multiple Apple Id's into one?

I have two different accounts and one has my music on it. I just bought an Ipad and cannot sync the music from my older Apple ID... I want to keep all my stuff on my new Apple ID. Is it possible to merge the old ID apps and content to the new ID?

No.
(76535)

Can i merge two apple itunes account into one

I have two different itunes accts. I would like to merge them into one. So that all my music is located in the same place under one apple Id/itunes account.
Please help.. by the way some of my music under one id is on a pc and the other is on a mac. Please advise how to make this happen.

Welcome to the Apple community.
You can't merge content from two accounts, sorry.

How to merge two separate Muse files into one file?

Have 220 pages built for a website, client wants to add another 180 pages. The Muse file is already slow to load and cumbersome to work with at 220 pages, it's going to be much worse at 400 pages. Is there a way to create two separate Muse files and then merge them prior to publish (or at publish, or post-publish). The only other solution I have is to build the second batch of pages in a separate file, then copy them into the main file one by one. Is there a batch copy/paste? Is there a merge?

Hello,
It's not possible to merge muse files as such. The pages have to either be created in the same file or they must be copied over individually later on from the other file to this file.
Cheers
Parikshit

Merging of multiple aperture libraries into one master library

Over the years, due to limited disk space on my Mac, I ended up having now 3 aperture libraries in 3 separate external hard drive, totaling between he 3 libraries over 2TB of photo storage. I just purchased an additional 4TB external drive (my 4th external hard drive from Lacie) to put ALL my separate Aperture libraries into ONE (1) master Aperture library. I would like to know if anyone could help me with a set of step by step instructions to MERGE my 3 separate Aperture libraries into ONE (1) MASTER library on my newly purchased 4TB external drive. I've looked online and found several articles dealing with merging libraries from multiple computers. I tried them all and was NOT able to do what I would like to do. PLEASE, if any of you have done what I would love to do or knows how to do it, I would appreciate your help. A step by step instructions regarding how to do it would be greatly appreciated! Thank you so much! Robert

Thanks Kieby,
This is what I did: 1.) File/Swith to Library/Other/New To create a new Aperture library which I called MasterAperture Library. The new library was created on my new 4TB external driver.
2.) I then CLOSED Aperture and re-opened it using my default Aperture library located on my Picture folder (Aperture Library).
3.) I did: File/Export/Project as new Library. I chose my external hard drive with the filename: MAsterAperture Library, EXPORT.
The first time I did that nothing happened, I still had an empty MasterAperture Library files without any pictures.
Then I did the same thing thing, except this time, I high lighted my first Projects and went down to my items on my albums and then CTL-H so everthing would be high lighted (ALl my projects and all my albums). Then I did step 3 to the MasterAperture Library and I was able to get the MasterAperture Library as an image copy of the content of the Aperture Library located on my Pictures folder.
Then another problem came up, when I tried to replicateduplicate the same steps outlined above to merge my other 2 remaining libraries, I could NOT do so because the process, at that time, told me that the file MasterAperture Library already exists and if I were to continue, the content of MasterAperture Library will be replaced. Of course this is not wantt. I would like to be able to MERGE the contents of the 2 or 3 remaining libraries that I have currently located in different external drive/locations into the file MasterAperture Library located on my 4TB external drive, and do so, if possible, without too many duplications (if possible, because if I have to remove duplicated projects/albums/photos later, I am willing to do so)!. By the way, I've read the Aperture userguide more than once and have tried the approaches suggested in the guide without succes yet. Thanks again for your kind help. Regards, Bob

Batch processing problem: merge eacg page's layers into ONE

hi, all
I have a big problem here.
I have a 598 pages' PDF document and a logo image (jpg), now, i wanna import this logo image file as a PDF layer and merge it to every page's layers in the PDF document, the desired result document should like this: each page in the PDF document has this logo image merged into it.
just like the following procedure:
        PDF           logo        mergeResult
===+========+======+==================
P1    layers         jpg          layers+jpg -> ONE layer
P2    layers         jpg          layers+jpg -> ONE layer
P3    layers         jpg          layers+jpg -> ONE layer
so, i consider using javascript in my acrobat pro 9.
What could i start with?
thanks in advance.

Thanks for your reply.
I find some detailed instruction of this flattenPages() function in Acrobat Javascript Reference document, it reads as follows,
Converts all annotations in a page range to page contents. If a page range is not specified, all annotations in the document are converted.
Note:Great care must be used when using this method. All annotations—including form fields, comments, and links—on the specified range of pages are flattened. They may have appearances, but they will no longer be annotations.
and, i have try this method as soon as your reply in my sight.
However, this operation could not merge the watermark and the page content. The logo image and the page content are still TWO seperate objects.
In a word, i just wanna convert any elements in the page into ONE. Exactly one.
Thanks so muck for reply above.

HT204053 merge multiple Apple ID's into one Apple ID

I have multiple Apple ID/accounts and would like to merge into one account

Cannot be done. Just use one account in the future and remove all private information from the other. Unfortunately any purchases will remain forever (unless Apple changes its mind) separated.

With the release of iCloud can we now merge different .mac apple ids into one?

This question has been asked before and the answer, I believe, was NO -- you can't merge multiple .mac or mobileme accounts into ONE.
The problem is I have two .mac accounts and I want one (the one that reflects my name, ie) so I can streamline my apple id and account history.
Does anyone know if this issue has been fixed with the new iCloud Service?
If not, that's SAD, really really SAD. Being a programmer myself, I can't understand why this should be such a big issue unless they screwed up their data model for 'Account'.

Why did you setup more then one AppleID?
Your @me.com account should've been the one and only account you needed. There was absolutely no need to create another AppleID for iCloud. You should've just used the me.com for iCloud.
Your email account (if different to your @me.com email) is nothing to do with Apple.

How can i merge my two apple ids into one

Hi I am still getting my head around itunes, etc. But i have two ids and now i want to merget them into one. Is there a simple way i can do this.
i have made some purchases on each.. can you tell me a simple way please.. Thanks

I purchased some music on my phone about 18 months ago but never put them on my computer. I dont have that phone now.I guess i could just ignore the old phone data and consider it lost. and move forward...
Hello Rosalie,
You can get those songs back at no charge! You don't need the old phone. Follow one of these guides:
iTunes 10 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH1619
iTunes 10 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH1706
When you do that, make sure the song files get added to your current iTunes library on your laptop. Then just stop using the old account.

GUI - How do i merge two diffrent layout managers into one tab?

Hello
I want to create a cellphone, and when you click a button it will be displayed in a textfield
the buttons are in a grid layout (4,3) and the textfield is in a border layout (NORTH)
I have the layouts in two seperate tabs, but how do i merge two diffrent layouts in to one tab ?
textfield:
package guitelefon;
import java.awt.*;
import javax.swing.*;
public class BorderPanel extends JPanel
   public BorderPanel()
      setLayout (new BorderLayout());
      setBackground (Color.green);
      JTextField output = new JTextField(5);
      add (output, BorderLayout.NORTH);
}Buttons:
package guitelefon;
import java.awt.*;
import javax.swing.*;
public class GridPanel extends JPanel
    public GridPanel()
      setLayout (new GridLayout (4, 3));
      setBackground (Color.green);
      JButton b1 = new JButton ("1");
      JButton b2 = new JButton ("2");
      JButton b3 = new JButton ("3");
      JButton b4 = new JButton ("4");
      JButton b5 = new JButton ("5");
      JButton b6 = new JButton ("6");
      JButton b7 = new JButton ("7");
      JButton b8 = new JButton ("8");
      JButton b9 = new JButton ("9");
      JButton bs = new JButton ("*");
      JButton b0 = new JButton ("0");
      JButton bf = new JButton ("#");
      add (b1);
      add (b2);
      add (b3);
      add (b4);
      add (b5);
      add (b6);
      add (b7);
      add (b8);
      add (b9);
      add (bs);
      add (b0);
      add (bf);
}driver:
package guitelefon;
// LayoutDemo.java       Java Foundations
// Demonstrates the use of flow, border, grid, and box layouts.
import javax.swing.*;
public class LayoutDemo
     public static void main (String[] args)
      JFrame frame = new JFrame ("Cellhpone");
      frame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
      JTabbedPane tp = new JTabbedPane();
      tp.addTab ("Grid", new GridPanel());
      tp.addTab ("Border", new BorderPanel());
      frame.getContentPane().add(tp);
      frame.pack();
      frame.setVisible(true);
}

a simple example with compilable code:
import java.awt.BorderLayout;
import java.awt.GridLayout;
import javax.swing.*;
public class Main {
public static void main(String[] args) {
    JFrame frame = new JFrame("Cellhpone");
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    JPanel panel = new JPanel(new BorderLayout());
    panel.add(new FooPanel(), BorderLayout.CENTER);
    panel.add(new BarPanel(), BorderLayout.NORTH);
    frame.getContentPane().add(panel);
    frame.pack();
    frame.setLocationRelativeTo(null);
    frame.setVisible(true);
class FooPanel extends JPanel {
private static final String[][] BTN_STRINGS = {
    {"1", "2", "3"},
    {"4", "5", "6"},
    {"7", "8", "9"},
    {"*", "0", "#"}};
public FooPanel() {
    setLayout(new GridLayout(BTN_STRINGS.length, BTN_STRINGS[0].length, 5, 5));
    for (int row = 0; row < BTN_STRINGS.length; row++) {
      for (int col = 0; col < BTN_STRINGS[row].length; col++) {
        JButton btn = new JButton(BTN_STRINGS[row][col]);
        add(btn);
class BarPanel extends JPanel {
private JTextField field = new JTextField();
public BarPanel() {
    setLayout(new BorderLayout());
    add(field, BorderLayout.CENTER);
}Edited by: Encephalopathic on Oct 29, 2009 7:56 AM

Is Possible to Merge Some Infotypes (10 infotypes) into One Infoprovider?

Similar Messages

Maybe you are looking for