Is sony correcting the issues with the PS4 controllers. The material for the analog sticks need to be changed.

I would like to get a ps4 but both my friends ps4 controllers analog sticks are tearing. I have used both the ps4 controller and xbox1 controller, I like both but prefer the lighter feel of the xbox1 analog sticks they are more comfortable and durable. I dont want to buy a xbox1 but if sony does not correct this issue it will sway my decision. I really like the additonal power the ps4 offers but the controller is a major concern. When microsoft came out with the 360 it had reliability issues, microsoft instead of fixing the problem had consumers send there 360's in for repair. They would not admit they made a mistake with the design of the system and the so called repair was temporary for may consumers as it would just overheat again and you would experience the same red ring of death. My 360 broke 3 times which made me lose all faith in microsoft as a company. The decieved consumers instead of correcting the issue. I hope Sony learns from their mistakes. Dont send consumers the same flawed controllers, admit there was a production mistake and fix it!!! If you guys change the material and correct the issue please email me, if it is corrected I will be a playstation owner if not I guess I will have to go with microsoft. I would also love to see analog sticks with less resistance, closer to the xbox1 sticks.
Thanks for listening hope you take these comments into consideration.

Please share your suggestion on  Sony PlayStation Community here. I'm sure they'd appreciate it. Thank you! 
If my post answers your question, please mark it as "Accept as Solution".

Similar Messages

  • Issue with not getting mail in sost for the PR Approvers

    Hi all,
    I have the following requirement
    Currently, requisitioner receives workflow email notification each time the PR has been released. If a PR has 3 approvers, the requisitioner receives 3 identical emails. The problem is that from the email alone, the requisitioner does not know if the PR has been fully released or not. After the first email, requisitioner may try to create the PO when in fact the PR is not fully approved yet.
    The case here is when the requisition is created, the mail is sent to first approver to release the requisition and when the first approver releases, mail is sent to next approver and so till all the approvers approve, finally after all the approvals it is sent to requisitioner.
    For this I have created an activity GET PR status where i am checking the condition based on release indicator.
    When the release indicator is '2' then the final notification is sent to the requisitioner.
    The process is working fine in dev system. When there are three approvers and all the approvers have same mail Id when i create the requisition and release manually in me55, I am able to see the mail in sost. This is actually done after running the batch program. But when the approvers have different mail Id's im able to see in swia but not in sost.
    Any help is appreciated.
    Thanks

    Hi rick,
    My bad, I have assessed the issue differently.
    Yes im sending a single mail to the requisitioner after all the approvals.
    But the issue here is after the requisition is created, the first mail is going to the first approver. When the approver releases, the mail that has to go to next approver is shown in swia.
    Now when i run the batch job, it has to appear in sost. But, it is not.
    The whole process actually working fine in DEV system but in QAS, it is not.
    Is is showing the following message when i manually release the order and tested
    Status
    StatusText
    Cannot process message; no node determined for [email protected]

  • Have you fixed the compatibility with HP printers and Symantec yet for the latest Firefox? I am waiting before installing.

    You told me to install the 3.7 version in April. It messed up both my printer and my Norton security. I downgraded successfully. I am waiting to hear that HP printers and Symantec are now compatible. You said this was their responsibility, but it is your responsibility to inform us when you have become compatible with the most common devices, security and other programs. How else would we find out except by bombing our computers by upgrading you?

    It seems like Symantec has.Hope this helps-
    http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_U
    About HP, seeing the thread with similar question would be helpful-
    https://support.mozilla.com/en-US/questions/799388
    https://support.mozilla.com/en-US/questions/804465?s=hp+symantec+firefox+&as=s

  • Any word on you guys fixing the issues with our HDMI ports we paid for that don't work?

    Has anybody stopped shuffling off these questions with responses like, "look for firmware updates for your Sony, Sharp, LG... etc... etc... etc... television" and actually started working on a driver fix yet so I can use the **bleep** port that I paid for?

    Update:
    Sorry, didn't read your first line.
    Hi,
    Is this for 6.5?
    Thanks,
    Bharat
    Bharat Karthik
    [email protected]
    http://www.eminenttech.com/
    Edited by bharatkarthik at 04/11/2008 2:03 PM

  • VBOX Layout issue with offset of a few pixels for the 2nd and 3rd components.

    The VBox has 2 components, on clicking the toggle label on the left,
    one component is hidden and the other is made visible.
    How does one get rid of the padding at the top when the
    2nd component is displayed.
    At the end of the script are two images with one showing the small padding.
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                                     xmlns:s="library://ns.adobe.com/flex/spark"
                                     xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
              <fx:Script>
                        <![CDATA[
          protected function lblSearch_clickHandler(event:MouseEvent):void
              // TODO Auto-generated method stub
              _Debug("Inside "+functionName());
              if(tabnavDetails.visible == true) {
              tabnavDetails.visible = false;
              tabnavSearchDetails.height = tabnavDetails.height;
              tabnavSearchDetails.width = tabnavDetails.width;
              tabnavDetails.height = 0;
              tabnavDetails.width = 0;
              tabnavSearchDetails.visible = true;
              } else if(tabnavSearchDetails. visible = true) {
              tabnavSearchDetails.visible = false;
              tabnavDetails.height = tabnavSearchDetails.height;
              tabnavDetails.width = tabnavSearchDetails.width;
              tabnavSearchDetails.height = 0;
              tabnavSearchDetails.width = 0;
              tabnavDetails.visible = true;
                        ]]>
              </fx:Script>
              <fx:Declarations>
                        <!-- Place non-visual elements (e.g., services, value objects) here -->
              </fx:Declarations>
              <mx:HBox height="100%" width="100%">
                        <s:Label id="lblSearch" name="lblSearch" buttonMode="true" text="Toggle" color="#2133E4" height="5%" paddingTop="8" click="lblSearch_clickHandler(event)"/>
                        <mx:VBox id="vboxMainBody" name="vboxMainBody" width="80%" height="95%" borderColor="Black"
                                             borderStyle="solid" borderVisible="true" focusColor="#FAFAFA" >
                                  <mx:TabNavigator id="tabnavDetails" name="tabnavDetails" visible="true" borderVisible="true" width="100%" height="100%">
                                            <s:NavigatorContent width="100%" height="100%" label="Media Details" >
                                            </s:NavigatorContent>
                                            <s:NavigatorContent width="100%" height="100%" label="Location and Eyeballs">
                                            </s:NavigatorContent>
                                  </mx:TabNavigator>
                                  <mx:TabNavigator id="tabnavSearchDetails" name="tabnavSearchDetails" visible="false" borderVisible="true" width="0%" height="0%" paddingTop="0">
                                            <s:NavigatorContent width="100%" height="100%" label="Search Details" >
                                            </s:NavigatorContent>
                                            <s:NavigatorContent width="100%" height="100%" label="Location and Eyeballs">
                                            </s:NavigatorContent>
                                  </mx:TabNavigator>
                        </mx:VBox>
              </mx:HBox>
    </s:Application>

    Thank you very much. With so many parameters around and being new to flex, this is not easy. Spent an hour or so and then
    decided to ask for help.
    Appreciate it.
    -Jumroo

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:
    1 
    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
    2 
    empty the trash:  Finder > Empty Trash
    3 
    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive
    5 
    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions
    6 
    when complete, restart the Mac normally, Apple menu > Restart
    7 
    install Keynote from the Mac App Store
    let us know if this helped

  • We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform "niScope_CalSelfCalibrate(handle, "", 0);" function.

    We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform “niScope_CalSelfCalibrate(handle, "", 0);” function.
    But it made it worse. I tried using option 2 to restore but it did not work.
    Could you pls advice me to resolve this issue.

    Hi Ana10,
    Are you using this digitizer with NI VideoMaster? if not you should probably post this in the Digitizer forums. That said I would suggest using the self calibrate function in MAX for this device rather than the LabVIEW API method just so that you can rule out any errors in correctly configuring the digitizer for self cal in LabVIEW. Also you should ensure that all inputs are disconnected before performing a self cal. If this still results in an error in calibration you could refer to the following document or arrange to return the digitizer to NI for external calibration.
    http://www.ni.com/pdf/manuals/370328e.pdf
    Hope this helps,
    Nick

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

  • IS there a way to fix the issue with text list boxes where they shift (empty space is smaller than the text size) when two text lsit boxes are side by side?

    Currently I have a webpage I designed for a company where I have multiple text list boxes side by side for the purpose of displaying data in each one based on a category in the database. So a text list box for the primary key, name, serial number, etc. I have to use Firefox as it typically works best for printing and functionality for the page. The single issue we are having is that in Firefox if the field is null as far as text the text are shrinks meaning all the data in that list box shifts up and is no longer in line with its congruent data in the other text list boxes. In other browsers that's not a problem and everything stays lined up regardless of whether there's text in the box or not.
    Unfortunately I cannot provide a link but if contacted I will provide screen shots.

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • HT1386 I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New song that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

    I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New songs that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

    Hey Etti101,
    I'd start off your troubleshooting process by deleting and redownloading the songs:
    If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
    Delete the purchased song that is exhibiting the problem from your iTunes library.
    Click on the Purchased link in the iTunes Store to view your previously purchased music.
    Download your previously purchased song from this list.
    via: Songs in iTunes may not play back completely
    http://support.apple.com/kb/TS4357
    Regards,
    Delgadoh

  • On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it  a windows 8 issue?

    on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it  a windows 8 issue?

    No. You have no alternative but to plug it into a computer running iTunes and restore it.

  • FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

    Hi,
    I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
    For example, what I'm trying to do is below:
    In grid2.column[A], I have the following formula:
    grid1.column[A]
    The result is an error.
    The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
    grid1.column[A] - grid2.column[A] 
    Any help is much appreciated!
    Thanks,
    Tiffany

    Thanks for the detailed response Mike.
    The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection  (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
    Thanks again for your responses. It's very much appreciated.
    Tiffany

  • IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

  • Didnt read the issues with ios5 until i've done my update. I ve restored my iphone 4, 3 times, and till now it is locked in a loop of the apple logo, loading

    Didnt read the issues with iOS5 until i've updated my iPhone 4. Restored 3 times and it is still locked in a loop of - Apple logo, loading, and a flash of "...restore successful...few steps away..." and buzz. Please help

    At the end of a Restore, you will be asked if you want the current iPhone to be synched as a New iPhone or use the current iPhone's settings. Selecting the former since to have solved the messaging problem. If u have done back-up of the "old" iPhone on iTunes, then your New iPhone will be the "old" iPhone too after synching with iTunes :)

  • When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

    when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

    All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
     Cheers, Tom

Maybe you are looking for