Is there a BUG in Aurora under solaris 5.8?

Mr Ravi is Aurora module certified for solaris 5.8 ?
i put the maximum values for java_soft_sessionspace_limit and java_max_sessionspace_size (2147483647 for both) and i still get the Aurora Assertion failure at eox.c:187
we really need to use oracle's java stored procedure features.
Thank you.

Oracle 8.1.6 is certified on Solaris 2.8.
Is it 64 bit Unix or 32 Bit Unix.
What is the size JAVA_POOL_SIZE. Increase this parameter by say 20 to 30 MB and check.
If it is 64 bit unix/oracle then set
LD_LIBRARY_PATH to $ORACLE_HOME/lib64.

Similar Messages

Serialization Perofrmance under Solaris

Hello,
I'am running an application under weblogic and Solaris. My application use EJB call between 2 EAR of the same Weblogic isntance (same JVM)
In the stack trace and using profiling tools (jvisualvm) I can see the serialization take a lot of CPU time
Is there any tunable to set under Solaris to improve Serialization of the Java VM ?
For information, My hardware is an Ultra Sparc T2 - T5440
Thank you for helping,
C.
Edited by: C2S on 30 sept. 2010 11:23

Probably not.
You're more likely hitting the weaknesses of the coolthreads CPU's. They can handle vast numbers of threads simultaneously, but the CPU power of each thread is quite low. So CPU intensive tasks run relatively slowly.

Since last Sunday (October 6, 2013) I couldn't open the new downloaded applications. I saw it under app store, purchased section but couldn't open it. I am on ios7 now, is there some bugs regarding app store?

Since last Sunday (October 6,2013) i could not open the new downloaded
applications and could not re-install all my other applications. I am on ios7 now. Is there a bug in app store? Where will i report this? What is the email address of apple support?

If you are completely confident that you didn't hide it, then you purchased those with different apple id. If you completely confident that you purchases with same apple id then you have hidden it. One of the other or you are speaking about a miracle. While miracles are possible they are not very likely. Remember
Occam's razor?

Is there a Bug or Bug Fix in iPlanet 4.1 for URL Forwarding???

Here's the issue...
We are forwarding a number of URL's from one website to another.
When we create these under the iPlanet Web Server Admin UI, the URL's appear, and get written to obj.conf, and the Web Server appears to "Save and Apply" the changes, effectively restarting the Solaris Process ID.
The problem is that the httpd process does not actually restart, and the URL forwards return a 404.
If we manually restart the Web Server daemon, everything appears to funtion properly.
I have been searching through the iPlanet Knowledge Base, and not haveing any luck, so I am hoping someone here may have an idea.
Thanks!

Hi,
Please let me know your iWS version including service pack(example:4.1sp7)and OS version. So that i can test it and let you know the feedback.
Is there a Bug or Bug Fix in iPlanet 4.1 for URL Forwarding???
yes is there, but related to NSAPI please check the below link.
http://docs.iplanet.com/docs/manuals/enterprise/41/rn41sp9.html#26930
Thanks,
Daks.

Sparc Storag Array 102 needs to run under solaris 10

I need to get a Sparc Storage Array to run under solaris 10. The soc driver that is needed is not supportted under solairs 10. I took the packages needed off of solari 9 cd and installed them but no luck. I tried to to do a modload and modinfo but it was not there.
The package loaded a file into /kernel/drv/sparcv9/soc. I have solaris 9 onanother disk on the same system and looked at the system trying to copy and edit the files on 10 but not device paths show up in the system. I copyied a file called soc that was in /kernel/drv/ I edited the /etc/device_aliases and path_to_inst but no good.
There are no entries in the /devices/ dir that reference the soc path. I do not if than can work but really would like to get this working.

The fibre interface on that beast is NOT a Gigabit connection,
such as is common on current systems.
It was a 100Mbps connection through an array controller,
running with a 40MHz microSPARC II control module.
You'd exceed its throughput capabilities in any attempt
to read or write data at or beyond that 100Mbps rate.
I don't anticipate much assistance in these forums for a technology that goes back a decade-and-a-half.
Contributors familiar with products from that era stopped posting in 2006
when the previous supportforum.sun.com was merged into this one.
We'll all look forward to your guidance after you succeed.
You'll teach the rest of us.

How to install a LPR Printer under Solaris 10 01/06

Hi,
I just installed Solaris 10 01/06 2 days ago and so far I'm pretty impressed, really a nice system!
I have one problem, though:
I have a Kyocera FS-1010 printer in my office which is connected to a CNet Printserver.
I'm able to print from other Linux and *BSD boxes to this printer by using CUPS and adding the Printer as a LPR Printqueue.
My question is: Is there a way to do the same under Solaris? As far as I know, Solaris doesn't use CUPS as the default printing system, unlike OSX for example.
Thanks in advance,
Dominik

Is there any reason you haven't ftp'd and then configued cups on Solaris?
http://www.sun.com/bigadmin/content/submitted/install_cups.html
alan

Problems starting SunMC Agent 3.6 under Solaris 10

Hi folks,
I just did a test installation of the new SunMC 3.6 Server which worked fine. Afterwards, I did a fresh install of the 3.6 agent on a Sun Enterprise 420R running Solaris 10. I installed the agent in the global zone.
At the end of the setup, when the system asks me if I want to start the agent, which I affirmed. But this didn't work, system says just laconically "Could not start agent". Unfortunately, I can't even find the logs, since there is no log subdirectory under /var/opt/SUNWsymon. Have they moved this under Solaris 10?
Any ideas somebody how to dig into this?
Regards,
Peter

Hi Mike,
This sounds a lot like a post just a few days ago:
http://forum.sun.com/thread.jspa?threadID=27785&tstart=0Well, yes and no...I read this thread and I found some similarities but it's not the same problem. Besides, this was Solaris 8, I've 10 and my guess is that it has something to do with Sol10.
What do you see when you start the Agent with this command:
/opt/SUNWsymon/sbin/es-start -aiNo error...I end up in a prompt:
bash-3.00# /opt/SUNWsymon/sbin/es-start -ai
info Dec 05 17:48:19 agent Sun Management Center Version: 3.6, Build: 18, H491, (c) 2003 Sun Microsystems, Inc.
info Dec 05 17:48:19 agent registering import actions
info Dec 05 17:48:19 agent loading standard services
info Dec 05 17:48:19 agent standard services load complete
info Dec 05 17:48:19 agent agent host and port: cngaer:1161
info Dec 05 17:48:19 agent trap handler destination host and port: SunMC_server:162
info Dec 05 17:48:19 agent event trap destination host and port: SunMC_server:163
agent:>
I've really no idea what to enter at this prompt. A simple "help" doesn't give me anything but I got something from "ls"
agent:> ls
classes templates _config config services iso shadow contexts rules

Backup issues (ufsdump/ufsrestore) under solaris 10

Hello all,
We are in the process of migrating to Solaris 10 from Solaris 8.
On our Solaris 8 systems with 2 HDDs we have a script that does a full backup of one disk (slice by slice) on to another using ufsdump/ufsrestore + boot record. The idea is that if one disk becomes corrupt logically/physically we can boot off the backup disk and continue using the system.
This worked fine under Solaris 8. We tried to do the same under Solaris 10 and noticed some unexpected behaviour when we tried to boot off the backup disk. Solaris 10 started "reconfiguring services" just like it does it when you install the OS fresh with the message:
Loading smf(5) service descriptions: xx/117
Somehow Solaris 10 "knew" that it was booted from a different device than last time.
My question would be: how does Solaris 10 know this and could we "fool" it into thinking that it was always installed on a backup disk, so it doesn't reconfigure itself every time new backup is made (and used).

"... The real question is "how can I be sure that except smf there is nothing else in the OS affected by HDD change" and that is what I meant..."
The fact that you use ufsdump on mounted (I am guessing that you are doing so :-) file systems is risky!. Alternatively, you can create snapshots (fssnap(1M)) for the file systems that you are going to ufsdump on.
If your main aim is to replicate and reduce down time in case of root disk failure, a better solution is make use of mirriong via Solaris Volume Manager (aka SDS or md(7D)). Mirror does not guard against human errors though, such as accidentally deletion of crucial files :-) (which a backup strategy can guard against).
Hope this helps.
Regards,
S.T.Chang

Sparc storage Array woring under solaris 10.

I need to get a Sparc Storage Array to run under solaris 10. The soc driver that is needed is not supportted under solairs 10. I took the packages needed off of solaris 9 cds and installed them but no luck. I tried to to do a modload and modinfo but it was not there.
The package loaded a file into /kernel/drv/sparcv9/soc. I have solaris 9 onanother disk on the same system and looked at the system trying to copy and edit the files on 10 but not device paths show up in the system. I copyied a file called soc that was in /kernel/drv/ I edited the /etc/device_aliases and path_to_inst but no good.
There are no entries in the /devices/ dir that reference the soc path. I do not if than can work but really would like to get this working.

Don't cross-post.
You already have an active thread on this topic in the other forum.
Cross-posting fragments any responses all over the universe.
As time passes and the threads get separated by time,
the responses become irrelevant.
That's why it's poor forum etiquette.
You end up diluting the information.

Are there still bugs in Elements 4

Are there still bugs in Elements 4?
Looking at the feature list I am tempted to buy Elements 4. But I have read many reviews that indicate that it is "bug ridden"- most reviews are dated just after release. Have Adobe fixed the bugs now?
Advice very welcome...

Unfortunately you seem to be suffering from what has come to be known in PE4 terms as the "Goldilocks Syndrome". Do you remember when Goldilocks ate the porridge; one was too hot; one was too cold and one was just right. This went on with the beds etc. Well, it seems (from this very forum) that PE4 has a similar problem; if your computer is over specified (even with ALL the latest available drivers installed), it won't run properly; if it is under specified (even with ALL the latest available drivers installed), it also won't run properly, it has to be just right. There are people out there who's computers are just right, as we don't hear from them, obviously.
See if you can take your copy of PE4 back to the shop (they should have told you that a new one was coming out, well, if they were a good shop) and wait for PE7 which should have all the PE4 bugs worked out. They don't have to do much with the interface as it's already flawless. Very difficult to improve on the best. They just have to make sure it works on E-V-E-R-Y-O-N-E's computer.
Have a look at Steve's PE7 introduction video's on the Adobe website. That's how a software should work.
Best of luck.

No interfaces up under solaris 8

hi,
I have a small problem with interfaces and configuring the net under solaris 8. The first thing is that there is a massage while the system is coming that there are no interfaces up.
When i use the ifconfig -a command to check it, the result is as follows:
lo0: FLAGS = 1000849 (up, loopback,running, multicast, ipv4) mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
my hardware is:
x86 family 6 Model 8 Stepping 6
AT/AT Compatibile
260 330 KB RAM
VGA: Intel Corporation 810 Graphics Controller Hub
NC: 3Com 3C920 Integrated Fast Ethernet ( 3C905C - TX Compatibile)
the next thing is that i dont even have the hostname file (e.g hostname.elxl0) in the etc directory.
What can i do about this. how can i create interfaces in order to b e able to configure the network?
Thaks for help in addvance
Doti

read Solaris x86 faq at http://sun.drydog.com/

Is there a 64-bit gdb for Solaris (I need both x86 and Sparc)

I'm looking for publicly available versions of gdb for both SPARC and Intel. I'm the current
developer of the NetBeans gdb module and we've had bugs filed that our Solaris users
can't debug 64-bit applications.
I've built a 64-bit gdb but its trying to dynamicly load a 32-bit .so (libexpat.so.0). I can still
run it by setting LD_LIBRARY_PATH, but can't figure out how to configure my gdb build
to use the right libexpat. Even if I could, I need something like the companion CD or
sunfreeware.com to provide (I'd even settle for gdb.gnu.org:-)
If anyone knows of publicly available versions, please email me.
Thanks,
Gordon

Again, I think you need to check the Microsoft web page, as I was able to find 64 bit versions of IE8 for download.
The URL to access the page is
http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8
From that page, I am able to select a 64 bit version of IE 8 for the following Operating Systems
-- Windows XP 64 Bit
-- Windows Vista 64 Bit
-- Windows Server 2003 64 Bit
-- Windows Server 2008 64 Bit
Windows 7 is not listed as an option as it already comes with IE8 installed by default.
Looks to me that Microsoft has already released a 64 bit version of IE8.
In fact, I went ahead and downloaded IE8 for Windows 2003 Server x64 bit, and looked at the details of the file. Each microsoft download has a digital signature associated with them, showing a date and time of when the exe was built.
According to what is shown below, IE8 for Windows Server 2003 has been around since Sunday, March 08, 2009.
So, what has adobe been doing since March of 2009? IE8 has been 64 bit for well over 2 years now (it will be 3 in March of 2012). While I know that it does take time to develop new applications, I don't think it would take 3 years for Adobe to come up with a 64 bit version of Reader that could have been built under the 64 bit platform.
--Brian

Ressource Usage under Solaris

Hi everybody,
I'm a newbie and I created four data bases on Oracle 9i under
Solaris. Ech data bases uses about 400 MB of memory. Is that a
normal value? Basically there is no data in the data bases, yet.
I created them as general data bases with the wizard.
Thanks for any comments or hints.
Best regards,
Ingo

Michael ,
If you are looking for the amount of physical memory on your system,
use the 'prtconf' command. If you would like to get some virtual
memory page statistics, use the 'vmstat' command. If you would like to
find out about the memory allocated to a particular process, use
'ps -e -opid,vsz,rss,args'. The only problem is the different behavior on
different versions of Solaris. Check the man pages to find out about
the usage of each command.
A good tool is 'prtmem' in the MemTool package which can be
downloaded anonymously from playground.sun.com in /pub/memtool/
or goto www.solarisinternals.com . The MemTool tools are reported to
work on Solaris 2.6 to 2.8. The 'prtmem' tool will break down the
memory usage as follows.
1) Total Memory - approx. total memory
2) Kernel Memory - memory allocated to the kernel
3) Application - amount of anonymous pages in memory
4) Executable & libs - amount of executable and shared library pages
in memory
5) File Cache - amount of file cache not on free list
6) Free, file cache - amount of file cache on free list
7) Free, free - memory that is free
Please note that the "Free, free" number is usually very close,
if not equal, to zero. This is due to the VM systems use of the free
memory to cache files.
The ultimate resource for this type of info, from a kernel perspective, is
the "Solaris Internals" book written by Mauro and McDougall. I
recommend it highly!
HTH,
Rob

Firefox/Flashplayer under Solaris 11

A customer has pointed out that under Solaris 11/Firefox 17 there are no plugins for viewing videos online (educational user). Yet I have noticed that after approx 20 seconds, the video DOES appear and plays normally without the aid of Flashplayer. What exactly is happening please?

One probable cause is that the site that provides the video switched to HTML5 video mode.

F60srvm process dies under Solaris

We are running OAS 4.0.7 under Solaris 2.6 with Oracle 8.0.5.
Our version of Developer 6 is 6.0.5.0.3.
We get a process started with "f60ctl start"
The server process dies when we invoke the form in a browser.
Anybody have any suggestions?

If you start a background process, the shell remembers its pid in $!.
That can be used to store the pid in a pid-file, which may be useful when stopping the thing or preventing multiple starts.
Or you can also use a wrapper script around the java program which remembers the java process's PID and traps the exit and sigstop signals, and in the trap stops the java process. Thus you have to find your own script process, not the java process
BTW: is there any special way to stop your java process or you want just to send it a SIGTERM signal?

Is there a BUG in Aurora under solaris 5.8?

Similar Messages

Maybe you are looking for