Is there a list of drivers in the kernel?

hey everyone...
i'm searching for a list of drivers included in the linux kernel.
i knew modprobe -l but this method is not really handy.
as example a website with categories or filters would be good. i hope anyone can help.

Not really an organized list, but this procedure can be usefull.
# zcat /proc/config.gz | less
This way you can check the kernel configuration settings.
Then make a search  inside "less" with:
/drivers
This way, you can read the driver headers and check those that are "=yes" (the drivers compiled in the kernel).

Similar Messages

  • How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-)

    How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-) Sorry for the danish  

    You can turn that feature off in Settings>Mail, contacts, calendars>Contacts>Show in App Switcher>Recents>Off.

  • Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)?

    Hi,
    Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)? Can you please help me?
    Venkatesh

    hi,
    there are standard ISR Adobe forms (interactive) to my knowledge, which you can customise at your convenience.
    kindly check at <a href="http://service.sap.com/adobe"></a>.
    more precisely, go here
    <a href="https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000478323&">Interactive Forms Delivered by SAP Solutions</a>
    Do update the forum reg your findings.
    Thanks and Regardas,
    Anto

  • Is there any list for out of the box portlets that come with portal installation.

    Is there any list for out of the box portlets that come with portal installation?
    Ramesh

    Yes - it's in the online help, on the Learning About Your Portal : About Portlets page. Here is the content:
    Portlets Created Upon Install
    The following portlets (and their necessary portlet Web services and Remote Servers) are created when you install the portal:
    Folder Expertise:This portlet displays the list of folders for which the user is an expert. It is added to the User Profile page by default.
    General Information:This portlet displays the default Profile Page. It is added to the User Profile page default.
    Managed Communities:This portlet displays the list of communities managed by the user. It is added to the User Profile page by default.
    Portal Login:This portlet allows users to log in to the portal. You probably want to add this to the guest user's home page so that users can log in from the default page displayed when they navigate to your portal.
    Portal Search:This portlet allows users to search your portal and access their saved searches. Users might want to add this to their home page for easy access to their saved searches.
    The following portlet templates (and any necessary portlet web Services and Remote Servers) are created when you install the portal:
    Community Links:This template is used by the portal to create portlets that display the links saved in a Community Knowledge Directory folder. To learn more about Community Links Portlets, see Community Links Portlets.
    Content Snapshot:This template is used by the portal to create portlets that display the results of a Snapshot Query.
    You can also install the following functionality as part of the Optional Enterprise Web Components:
    [url[/url]Stored Content:This portlet template allows you to create portlets that display stored content that is periodically refreshed. You might use this type of portlet to display content that is resource-intensive or takes a long time to generate. To learn more about Stored Content portlets, see Stored Content Portlets.
    [url[/url]XML Source:This portlet template allows you to create portlets that can collect XML content from an external source and display it in the portal as HTML. To learn more about XML Source portlets, see XML Source Portlets.

  • Is there a list of shortcuts for the camera raw plugin anywhere?

    Is there a list of shortcuts for the camera raw plugin anywhere?
    The link under Bridge no longer works

    I've not had time to check all of the changes from Bridge 2 to 2.1 but attachment (approx 400KB) should be pretty close.
    BTW: check out the result of of Alt/Option dragging sliders in Split Tone panel ;-)

  • Is there any list / report to see the material posted to COST Center

    Hi ...
    I have created a Purchase Order for raw material with Account category "K" cost center and prepared a goods receipts for that.
    As I was expecting this GR doesn't increase the stock of Plant mentioned in Purchase Order
    But I was expecting that there will be two enteries in MATERIAL MOVEMENT with + and - qty. But there is only one entry with + qty.Can anyone explain the reason for that.
    Also pls help to search a report where i can see Stock which have been consumed by a COST Center.
    REGARDS
    SANDEEP

    Hi Sandeep,
    When you Receipt the material for Consumption (Cost center ), There two entries are posted with PO amount .
    i.e
    Debited to G/L account assigned to Material valuation class with Transaction GBB-VBR.This G/L account was used as a Cost elements for Cost center.
    Creadited to GR/IR Account.
    Reports:-
    Go for transaction code MB51
    select Materia , Plant,...
    Select Movement type -201
    Execute report.
    Go for Current display varient and select cost center as aPosition/line 1and continue.
    You will get report by cost center.
    Rewards if helpful..
    Regards
    sanjayL

  • Integrating the drivers for the Intel WiFi Link 4965AGN in the kernel.

    Hello, I trying to build a custom kernel with only the needed things and I'm almost done; but if I try to include the drivers for that wireless card there is a message at boot time saying that the microcode could not be found.
    If the driver is compiled as a module everything is fine, what could be causing this? Is there any way to include the drivers in the kernel and still have them working?
    Thank you very much.

    I have got the same Problem here without seperated /boot partition.
    lspci | grep 4965
    03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
    dmesg | grep 4965
    iwlagn 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
    iwlagn 0000:03:00.0: request for firmware file 'iwlwifi-4965-2.ucode' failed.
    The file iwlwifi-4965-2.ucode is still in /lib/firmware/
    I tested with 2.6.34 and 2.6.35-rc1.

  • [SOLVED] Rebuild catalyst drivers automatically if kernel updated?

    Hi
    I use the catalyst proprietary drivers, and I read on the catalyst wiki page that it is possible to automatically rebuild (?) the drivers if the kernel was updated, to prevent the drivers not working on reboot. However, the wiki makes absolutely no sense to me.
    I need help installing catalyst_daemon, because I think that catalyst_daemon is the daemon that checks if a rebuild needs to be done. However, simply entering:
    pacman -S catalyst-daemon
    does nothing, because it complains that catalyst and catalyst-daemon are in conflict.
    What do I need to install, and how do I need to configure it, so that fglrx or the catalyst drivers are automatically rebuilt so that I don't get a black screen upon rebooting.
    Thanks in advance
    Last edited by sheomualjy (2012-04-22 06:22:07)

    Oh, that sounds good. If I were to use catalyst-hook, would I simply install catalyst-hook? Do I need to add anything else?
    EDIT: I just noticed that catalyst-hook also conflicts with catalyst. I am assuming that is for the same reason as you just said, so I am assuming I would remove catalyst to make way for catalyst-hook
    Last edited by sheomualjy (2012-04-22 03:59:13)

  • How can I get the list of drivers without getting popup message?

    Every time the application gets to this line:
    File[] roots = File.listRoots();
    I get message box: "There is no disk in the drive.
    Please insert disk into drive A:"
    How can I get the list of drivers without getting
    this message popup?

    I don't have a solution to this problem. However, it does occur and it is annoying. I am testing our application on 4 client machines. On three of them, it NEVER asks for the floppy disk. On the remaining one, it ALWAYS asks. I have looked on the computers and cannot find any configuration differences (in fact, these machines are kept in a "closed environment", and therefore, they are configured, by default, exactly the same).
    Does anyone have any thoughts?

  • Does the Airport Extreme support HP cp1025?  There are two versions of the printer the cp1025 and cp1025nw.  I have the cp1025, and can't set it up. Is there a list of AE/bonjour supported printers?

    Does the Airport Extreme support HP cp1025?  There are two versions of the printer the cp1025 and cp1025nw.  I have the cp1025, and can't set it up.
    Is there a list of AE/bonjour supported printers?

    Bonjour is a transport protocol. It also provides a means of advertising a printer on a network.
    Any list that shows printers that support Bonjour is generally an indication that the printer itself supports this protocol, meaning that when it is connected to the network, you can see it in your default Add Printer browser. In the case of the Airport, it also supports the Bonjour protocol and will advertise any printer that is connected to its USB port. The printer itself does not have to support Bonjour. The Airport performs this function. And like many lists, they are not kept up to date because each vendor releases several new models every quarter or half year.
    There are definitely printers that don't work when connected to the USB port of the Airport. And this is more that the printer driver does not support this type of connection, mainly due to the port not supporting bidirectional communications which some printer drivers require. The Canon UFR2 and CAPT drivers are a good example of this limitation. But this is only the Mac drivers. The Windows equivalent drivers work fine when the printer is connected to the USB port.
    So with you having an issue with the Windows drivers then I don't think it is a case of them not supporting Bonjour but more to do with some other component not functioning when the printer is shared by the Airport. The error message appears to have more to do with local user rights which is probably driver related. I've seen some printers that you cannot use the Windows Add Printer wizard to add them. Instead you have to use the vendors utility because of some proprietary protocol being used. Maybe this is one of those?
    Now that you seen how it should work based on when you used the C3188, if you still get that error message at point 6 of adding the C1025 then it would suggest a driver compatibility issue with the Airport - which is not necessarily a Bonjour compatibility issue. So unless there was another model of HP printer driver that you could use to this C1025 and that was also compatible with the USB port of the Airport Extreme, then I would suggest your best action is to replace the printer with a model that does work. Maybe even one that has builtin wireless so you don't have to use the USB port of the Airport.

  • When trying to statup with install disc inserted,all i get is an apple logo.when i try starting using command v it seems to see the cpu,but does not list any drivers.any thoughts appreciated!

    when trying to startup with install disc inserted,all i get is an apple logo.when using command v keys,it seems to see the cpu, but doesn't list any drivers.any idea what,s wrong?

    That is the wrong system disc, the Mid 2007 Mac Mini's originally came with Tiger 10.4. You must have been sent the wrong disc, because that gray 10.6 system disc is obviously for a later Mac.
    Mac mini (Mid 2007) - Technical Specifications
    At this point I'm afraid that your options are very limited.
    1. Call Apple, have your serial # handy and ask for a replacement Tiger disc set. Problem is that it wouldn't be of much use, except for maybe running the Apple Hardware Test.
    Apple - Support - iMac - Service FAQ
    2. Purchase a Retail Snow Leopard Upgrade disc.
    Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    As for the RAM, if 2GB is shown in both Apple / About This Mac and in the Activity Monitor then there is a pretty good chance that's it OK. Of course it is hard to test without the original disc set and in your case may need to be done with a third party RAM checker like Memtest OS X

  • I am trying to connect a printer but when the pc searches for the drivers/software it says there are none for this version of lion? 10.8 I have downloaded drivers for the 10.7 version but still cannot get it to accept any ideas?

    I have a xerox phaser printer which I want to connect to my mac book but each time it says there is no software to support the version of lion I have!
    I have downloaded the software for the 10.7 but that hasnt helped... any ideas?? thanks

    You will have to try the xerox website for the latest drivers for Mac OX system you are using
    http://www.support.xerox.com/support/engb.html
    It may be that your printer is not supported. You do not specify which model you have so unable to help further.

  • I have my download list but I deleted the file on my computer and want it back, is there a way of using the list to get it back?

    I have the download list for firefox but accidentally deleted the file on my computer. I need the file and was wondering if there was a way of using the download list to access the file somehow, I don't think the file os on the internet either as I haven't found it

    Hello!<br>
    Go to the downloads window, right-click, and click "copy download link" or "go to download page". You should then be able to re-download it only if it's still in the downloads window

  • Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?

    Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?  Or do I have to click each one and write down the image name by hand?
    Thanks!
    LJ

    Alternatively use a browser:
    Use the Firefox Web Developer Toolbar
    https://addons.mozilla.org/en-US/firefox/addon/60
    Images > View Image Information
    or the List All Images Add On for Firefox
    https://addons.mozilla.org/en-US/firefox/addon/3688
    or the Web Developer tools in IE8 (or earlier), F12 > Image > View Image Report

  • Is there a way to install bootcamp drivers without the cd?

    Well, I know it is really easy to install te drivers, but i left my Leopard CD at my other house. Is there any way i could download the drivers or something? I bought Leopard, i just don't have the disc with me.

    Hi and welcome to Discussions,
    sorry but no luck.
    There is no download possibility for the drivers. At least not until the next BootCamp Update.
    And with BootCamp 2.0 the drivers are no longer part of the Bootcamp Assistant in OSX.
    You need the OSX DVD for the drivers.
    Regards
    Stefan

Maybe you are looking for