Is there a stop script for weblogc 4.5.1 on NT

Hi,
Is there a stop script for weblogc 4.5.1 on NT?? There is one for starting
the server.
Thanks

You can use the following in a script if you don't mind exposing your
password:
java weblogic.Admin t3://myhost:myport SHUTDOWN system <password> <seconds>
Guy
In weblogic.developer.interest.environment Gaurav Khanna <[email protected]> wrote:
Hi,
Is there a stop script for weblogc 4.5.1 on NT?? There is one for starting
the server.
Thanks

Similar Messages

Is there a linux script for packaging HTML5 extensions

I am looking for a way to package an HTML5 extension in a linux environment. The available downloads don't seem to include a linux compatible executable.
http://labs.adobe.com/downloads/extensionbuilder3.html

You can use the following in a script if you don't mind exposing your
password:
java weblogic.Admin t3://myhost:myport SHUTDOWN system <password> <seconds>
Guy
In weblogic.developer.interest.environment Gaurav Khanna <[email protected]> wrote:
Hi,
Is there a stop script for weblogc 4.5.1 on NT?? There is one for starting
the server.
Thanks

Is there an availability script for dreamweaver?

Hi for my site i like to build an avalabilty page. Its a Site where you can rent a house.
I have something like this in mind:
http://www.vakantievillamydream.com/en/availability.html
I hope its possible?
Regards Brian

thank you snake eyez,
I found one. But the problem ive got now is confusing. I see a lot of text and i dont know why that is.
Hope you can help
http://www.hureninparamaribo.nl/contact.htm
regards Brian
Date: Thu, 17 May 2012 09:46:45 -0600
From: [email protected]
To: [email protected]
Subject: Is there an availability script for dreamweaver?
    Re: Is there an availability script for dreamweaver?
    created by SnakEyez02 in Dreamweaver - View the full discussion
It's possible as long as you know how to program. DW has nothing built in to make these. If you don't have the knowledge I would recommend outsourcing it or going to a place like Hotscripts.com and look for one in your server language. None really come to mind or jump out at me, but many are free or have free trials so that you can see what works best for you.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4416249#4416249
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4416249#4416249. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is there an updatedcrossrefs script for InDesign CS6

Running Mac Pro/2.66 GHz—Quad-Core Intel Xeon/Snow Leopard/
OS/Mac OS X Version 10.6.2/2.66 GHz
I converted a CS3 InDesign that uses the script "updatedcrossrefs.js", to CS6 InDesign. This file uses hyperlinks on the TOC and Index.
I tried using the same script for CS3 InDesign in CS6 InDesign but it does not work.
This is the error message "Could not catch page. Check destination names and existence."
Is there an updated script for CS6?

Sorry did not know I was using bold. My co-worker found this script however, she does not work here anymore. But here is the script. I know nothing about scripts except how to use them. Sorry.
// Updatecrossrefs.js
// Updates cross references made with hyperlinks
// the hyperlink destination is where the reference refers to
// the hyperlink sourcetext is the text that will be updated (like see xx)
// If a book is open, the book will be handled,
// if no book is open, the active document will be handled.
// Made by Teus de Jong, last version April 10, 2006
// Revisions by Dave Saunders January 22, 2006 and March 20, 2006
// Thanks Dave!
// Added unique naming mechanism for sources -- October, 2008
if (app.books.length == 0){
          if (app.documents.length == 0){
                    errorExit('No documents are open');
          } else {
                    nrofdocs = 1;
                    doc = app.activeDocument;
} else {
          nrofdocs = app.books[0].bookContents.length;
          for (i = nrofdocs - 1; i > -1; i--) {
                    if (app.books[0].bookContents[i].status != BookContentStatus.documentIsOpen)
                              app.open(File(app.books[0].bookContents[i].fullName));
          doc = app.open(app.books[0].bookContents[0].fullName);
for (d = 1; d <= nrofdocs; d++){
          for (i = 0; i < doc.hyperlinks.length; i++){
                    hyper = doc.hyperlinks[i];
                      // leave ID's own internal markers alone
                    if (hyper.name.substring(0, 1) == '.'){continue}
                      // leave hyperlinks to URLs alone
                      try {
                              if (hyper.destination.constructor.name == 'HyperlinkURLDestination'){continue}
                    } catch (e) {
                              hyper.showSource();
                              errorExit('Selected hyperlink has undefined destination');
                    s = hyper.source.name;
                    // added October, 2008
                    // sometimes ID's unique name mechanism for sources fails; make sure the source has
                    // the same name as the hyperlink + '_src'
                    if (s != hyper.name + '_src')
                              hyper.source.name = hyper.name + '_src';
                    if (hyper.destination.constructor.name == 'HyperlinkTextDestination'){
                              s = getParentPageName(hyper.destination.destinationText);
                     } else {
                               // try/catch added to allow for hyperlinks that have lost their destination -- Dave
                               try {
                                          s = hyper.destination.destinationPage.name;
                                } catch (e) { continue }
                    if (s != ''){
                              // Check to see if update needed; saves a lot of time when processing large books -- Dave
                              if (hyper.source.sourceText.contents != s) {
                                        hyper.source.sourceText.contents = s;
          if (d >= nrofdocs){
                    break;
          doc = app.open(app.books[0].bookContents[d].fullName);
function getParentPageName(txt){
          try {
                    var myFrame = getParentTextFrame(txt);
                    var pag = myFrame.parent;
                    while (pag.constructor.name != 'Page'){
                              // in case the reference is in an inline, the parent of the frame is a character
                              if (pag.constructor.name == 'Character'){
                                        pag = getParentTextFrame(pag);
                              // in case the chain goes sour, back out
                              if (pag.constructor.name == 'Application'){
                                        throw 'Error';
                              pag = pag.parent;
                    return(pag.name);
          catch (e) {
                    alert('Could not catch page.\nCheck destination names and existence.');
                    return('');
function getParentTextFrame(x){
          if(app.version == 3){
                    return(x.parentTextFrame);
          else {
                    return(x.parentTextFrames[0]);
function errorExit(s){
          alert(s);
          exit();

Where can i find start/stop scripts for all SAP instances

Hi,
I installed CI, DB and Dialog instance on a standalone S10 machine and i could see start scripts under /sapmnt/RAM/profile
START_DVEBMGS09_hostSAP
START_D24_hostSAP
But i cann't see stop scripts for the above and also i cann't see start and stop scripts for SAP DB instance. Could some one point me where i can find them when everything is installed on a single box.
Thanks,
Ram

USAGE: STARTSAP.EXE name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
FURTHER INFORMATION:
- The executable sapstart.exe must be in the same directory
when you start sap instacne, it will check db instance first, if db instance not start , it will automatic start db instance then sap instance.
vice visa :
stopsap is alos can be used.

How to get stop script for the server

Hello everyone,
I installed weblogic server8.1 on my Linux machine and used $WL_HOME/server/bin/startWLS.sh
to create a new domain and server. But I did not find any stop script(like stopWLS.sh)
which can stop myserver. How can I get it?
Thanks for your helps.
Iris

which can stop myserver. How can I get it?Here's an etc/rc3.d script I use for my RH9 server. You'll notice there is
a line in there for stop(), you can run that manually if you so choose, or
you can use it via the xinetd (I think that's what it's called?). Good luck.
# processname: weblogic
# pidfile: /var/run/weblogic.pid
PIDFILE=/var/run/weblogic.pid
# Source function library
. /etc/init.d/functions
#check to see if we can write to config.xml...so non-root uses stop here
[ -w /Domain/config.xml ] || exit 0
#setup the environment for the java commands
. /bea/weblogic81/server/bin/setWLSEnv.sh
cd /Domain
start(){
echo "Starting WebLogic for Domain"
cd /Domain
daemon ./startWebLogic.sh &
echo $! > $PIDFILE
RETVAL=$?
echo "WebLogic Server started."
return $RETVAL
stop(){
echo "Stopping WebLogic for Domain"
rm -f $PIDFILE
java weblogic.Admin -url localhost:80 FORCESHUTDOWN
status(){
echo "Getting Weblogic status for Domain"
java weblogic.Admin -url localhost:80 GETSTATE
restart(){
echo -n "Restarting WebLogic for Domain"
stop
start
# See how we were called.
case "$1" in
start)
start
stop)
stop
restart|reload)
stop
start
status)
status
echo $"usage: $0 {start|stop|status|restart|reload}"
exit 1
esac
exit $RETVAL

Need help in writinf a stop script for a production server

can somebody help me with a stop script which stops a jrun
production server.
jrun -stop production
this command should work but how do i use this in a script .
Thanks

Hi,
I highly recommend that you skip VBScript and learn PowerShell instead. This is pretty trivial in PowerShell:
If ($env:COMPUTERNAME.Length -le 15) {
# Do stuff
# HINT: Look into Start-Service
Write-Host "Under limit: $env:COMPUTERNAME"
} Else {
# Do optional stuff
Write-Host "Over limit: $env:COMPUTERNAME"
(OT: jrv - happy? =])
If you must stick with VBScript for some odd reason, here's an example to get you started:
Set wshNetwork = WScript.CreateObject( "WScript.Network" )
strComputerName = wshNetwork.ComputerName
If Len(strComputerName) <= 15 Then
'Do stuff here when the name is short enough
WScript.Echo "Under limit: " & strComputerName
Else
'Do stuff here when the name is too long (only if you want to)
WScript.Echo "Over limit: " & strComputerName
End If
http://www.activexperts.com/activmonitor/windowsmanagement/adminscripts/services/
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Hi is there a TextCleanup script for Indeisgn CC?

I am looking for a TextCleanup Script for Indesign CC, any help would be greatly appreciated.

There are tons of scripts to do this.
For example,
http://www.kahrel.plus.com/indesign/clean_space.htmlhttp://
Remove spurious space | Peter Kahrel
You may look in the web:

I want to have pages speak with more than one voice. Is there a command / script for this.

This may seem strange but I teach ESL and want my students to practice listening exercises.
What I want is to prepare a dialog and have it speak in two different voices like a normal conversation between a man and woman.
Is there some script or command that I can insert into my text document that will basically change the voice from one person to another.
Ex: How are you Jim? (in allison voice)
Fine thanks. (in Fred voice)
BTW: I recently found that there is a command [[slnc 3500]] that causes the computer to wait an amount (in milleseconds) between phrases, but have not found any other commands.
Thanks for your help!

Let's say you have a TextEdit document, that contains clusters of passages:
[Allison]How are you, Jim?
[Fred]Fine, thanks.
The best you can hope for without considerable complexity, expense, or both is to fall back on the Automator application on OS X. You can create a very simple Automator Service that speaks selected text in the chosen voice. This Service can be tied to a unique keyboard shortcut, and each voice can have its own unique keyboard shortcut that provides a voice start/stop speaking capability for longer text passages.
Once the individual Automator Services for Allison and Fred voices are saved, the student can triple-click on a sentence or paragraph. I have embedded the [voices] at the beginning of the sentence, and added a feature to the Automator Service that tests the [voice]. Select the [Allison] sentence and use Fred's keyboard shortcut and nothing is spoken.
Automator is found in your /Applications folder. It is the robot with the pipe. When you first launch Automator, it will prompt you for a new document. Select new document and then double-click the Service gear. In the left Automator panel, are Libraries of actions. Select the Text category. Immediately to the right, will be a column of Text related actions. Locate, single-click, and drag the Filter Paragraphs action to the much larger workflow window and release it. Locate the Text action Speak Text, and drag/drop it below the Filter Paragraphs workflow item. Make certain that these are configured to reflect the following completed Allison Service workflow. You should now have the following (single-click to enlarge the image):
Save this via Automator > File > Save... and name it just Allison, or Allison-voice. From the Automator File menu, close the Allison Service workflow. Now, following the above instructions, repeat this process to make the Fred Service with Automator > File > New.
Copy the above TextEdit text into a new TextEdit document. Select the [Allison] line, and then see if the Allison Service is available under TextEdit > Services > Allison. If it is, select it and listen. If no Allison Service appears here — select from the Dock, System Preferences, and then the Keyboard preference. Select Shortcuts > Services and then scroll the right list of Services to find Text > Allison. It is probably selected, but deselect, and then reselect it. It should now appear under the TextEdit > Services menu. In the following Screenshot, you will see the Allison Service activated and assigned a control-A key to activate the voice on the selected text in your document. Repeat this process for the Fred voice Service, with a different keyboard shortcut than Allison.
It is a good idea to be aware of reserved keyboard shortcuts.
OS X
Pages ’09
Pages v5.
Voices
If you want to fine tune Allison's (or Fred's) speaking rate, you can do this in the Dictation & Speech > Text to Speech preference panel. If you check the Speak selected text when the key is pressed item, you can start and stop Allison speaking the selected document text in longer text passages. Since the default system voice uses Control+S, you probably want another short-cut specific to Allison. I chose Control+Q. Once Allison is speaking, press Control+Q to pause, and Control+Q to resume speech to the end, or until encountering [Fred]. When you configure Fred, you will need a separate Text to Speech shortcut for that voice.
In Summary, you now have two different voices that are initiated as Voice Services with two unique keyboard shortcuts. The individual voices can be paused or resumed once initial Voice Service is started. For a given voice, the student selects the voice specific text passage, and presses the associated keyboard shortcut for that voice. If the passage is a larger paragraph, the student may pause the voice with its unique pause/resume keyboard shortcut. If a student doesn't select a passage of text and presses the voice's pause/resume key, it will start speaking until it runs out of text. An undesirable side-effect.
You should have sufficient guidance above to create and activate two voices as you initially described.

Location.href not working in firefox. Is there any alternative script for that?

window. location.href not working when i try to submit an ajax form.
I am a programmer. This code works on all browser except firefox.
Any solution for this? or any alternative code for location.href?

A good place to ask advice about web development is at the mozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the mozillaZine forum site in order to post at that forum.

Startup/Shutdown script for OBIEE 11.1.1.5.0 on Linux

There was a very good thread on start/stop scripts for Oracle BI 11.1.1.3.0 that can be found at
https://forums.oracle.com/forums/thread.jspa?messageID=9896816#9896816Now OBI11.1.1.5.0 is out and I tried to use the scripts in the post to start OBI 11.1.1.5.0 after system reboot. I did the following
1) saved the scripts modified with my environemnt variables in /etc/init.d
2) login as root
3) issue command, and got in std out right away
# service obiee start
Starting Oracle Business Intelligence on Tue Sep 27 10:39:31 PDT 2011
Logs are sent to /var/log/obiee-start.log
4) check the log file
[oracle@cchdb ~]$ tail -f /var/log/obiee-start.log
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Sep 27, 2011 10:39:54 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 27, 2011 10:39:54 AM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 27, 2011 10:39:54 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
5) Check running processes
[root@cchdb oracle]# ps -fe|grep obiee
root 9332 1 0 10:39 pts/2 00:00:00 /bin/bash /etc/init.d/obiee start
oracle 9452 9179 0 10:39 pts/1 00:00:00 tail -f /var/log/obiee-start.log
root 9481 9305 0 10:40 pts/2 00:00:00 grep obiee
OBI is not started. Can some one help ?

Tried various things and has a work around.
First of all, cannot make WLST work for me. Then tried manually step by step as described in reference https://forums.oracle.com/forums/thread.jspa?messageID=9896816#9896816 that is in fact agree with document e10541.
1) Start Admin Server and response to prompt to username/password
<BI Domain Home>/bin/startWebLogic.sh
2) Start node manager
$WL_PATH/startNodeManager.sh
3) Start managed Server with Weblogic Server Admin Console
4) Start System Components with opmnctl
./opmnctl startall This works with the following notes1) Do step one in backgroumd not work, cannot response the username/password prompt properly.
2) If change WLS_USER and WLS_PW in <BI Domain Home>/bin/startManagedWebLogic.sh as in the reference cited abover, step 1 still prompt for username and stops right after username is provided.
3) Step 3 does not work if use command line
<BI Domain Home>/bin/startManagedWebLogic.sh bi_server1 http://<admin_server_host_name>:7001
Has to use UI tool Weblogic Server Admin Console. Question1) How to provide username/password to startWebLogic.sh to allow run it in background
2) How to provide username/password to startManagedWebLogic.sh to allow run it in background

CC&B start and stop script

Hi,
has any one automated the start and stop script for backup.
Please share the script.
Regards
TAI

Hi,
I don't believe there is a single script that can fit all installation of CC&B .
Backup usually has a strategy and a plan.
In our installation we run incremental backup daily for the database, and full backups weekly and montly. As for the application, full backup daily. Also we have several application servers running and the database has RAC installation.
So I guess you will need to review your backup strategy consider existing backup solutions in the market.
AK

Start up script for EPM 11.1.2 in Unix or Windows...

Is there a sample start up script for starting required services in EPM 11.1.2 ?
I saw that the Program Files item for EPM, has a link to some start up script but
it starts everything and it seems to refer to many scripts and seem complicated.
Is there a simple script for EPM 11 ? In System 9, I used Net Start to start services in a batch file and
used Sleep command between commands to give enough time for the services. But it would be nice
if there is a script which automatically checks to make sure to start the next service only after a dependent service has started.
cheers
Z

Simple examples for EPM11.1.2.1 on Windows env.
epmStart.bat
@ECHO OFF
ECHO EPM 11.1.2.1 STARTING / Batch EPM full start script by Antun Kulkov, 2011
ECHO See more at http://silw.blogspot.com
ECHO SQL Server Starting
sc start "MSSQLSERVER"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Oracle Process Manager (ohsInstance)
sc start "OracleProcessManager_ohsInstance1649849633"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (EPM_epmsystem1)
sc start "opmn_EPM_epmsystem1"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (ConfigurationManager)
sc start "OracleEpmSystem_Administratord_oracle_middleware_user_projects_epmsystem1ConfigurationManager"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Hyperion RMI Registry
sc start "Hyperion RMI Registry"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Hyperion Foundation Services - Managed Server
sc start HyS9FoundationServices
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Administration Services - Web Application
sc start HyS9eas
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Integration Services
sc start "Essbase Integration Server"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Provider Services - Web Application
sc start HyS9aps
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Studio Service BPMS
sc start "Hyperion Studio Service BPMS bpms1"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPM Architect - Process Manager
sc start EPMA_Server
waitfor NONEXISTINGSIGNAL /T 30
ECHO Hyperion EPMA Data Synchronizer - Web Application
sc start HyS9EPMADataSynchronizer
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPMA Web Tier - Web Application
sc start HyS9EPMAWebTier
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion CALC Manager - Web Application
sc start HyS9CALC
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Planning - WebHyS9Planning Application
sc start HyS9Planning
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Web Analysis - Web Application
sc start HyS9WebAnalysis
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework
sc start HyS9RaFrameworkAgent
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Financial Reporting - Web Application
sc start HyS9FRReports
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework - Web Application
sc start HyS9RaFramework
waitfor NONEXISTINGSIGNAL /T 5
ECHO ALL DONE!
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle EPM System has been started.
epmStop.bat
@ECHO OFF
ECHO EPM 11.1.2.1 STOPPING / Batch EPM full stop script by Antun Kulkov, 2011
ECHO See more at http://silw.blogspot.com
ECHO Hyperion Web Analysis - Web Application
sc stop HyS9WebAnalysis
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework
sc stop HyS9RaFrameworkAgent
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Financial Reporting - Web Application
sc stop HyS9FRReports
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Reporting and Analysis Framework - Web Application
sc stop HyS9RaFramework
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Planning - WebHyS9Planning Application
sc stop HyS9Planning
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion CALC Manager - Web Application
sc stop HyS9CALC
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPMA Web Tier - Web Application
sc stop HyS9EPMAWebTier
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPMA Data Synchronizer - Web Application
sc stop HyS9EPMADataSynchronizer
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion EPM Architect - Process Manager
sc stop EPMA_Server
waitfor NONEXISTINGSIGNAL /T 30
ECHO Hyperion Studio Service BPMS
sc stop "Hyperion Studio Service BPMS bpms1"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Provider Services - Web Application
sc stop HyS9aps
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Integration Services
sc stop "Essbase Integration Server"
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Administration Services - Web Application
sc stop HyS9eas
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion Foundation Services - Managed Server
sc stop HyS9FoundationServices
waitfor NONEXISTINGSIGNAL /T 5
ECHO Hyperion RMI Registry
sc stop "Hyperion RMI Registry"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (ConfigurationManager)
sc stop "OracleEpmSystem_Administratord_oracle_middleware_user_projects_epmsystem1ConfigurationManager"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (ohsInstance)
sc stop "OracleProcessManager_ohsInstance1649849633"
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle Process Manager (EPM_epmsystem1)
sc stop "opmn_EPM_epmsystem1"
waitfor NONEXISTINGSIGNAL /T 10
ECHO SQL Server Stopping
sc stop "MSSQLSERVER"
waitfor NONEXISTINGSIGNAL /T 5
ECHO ALL DONE!
waitfor NONEXISTINGSIGNAL /T 10
ECHO Oracle EPM System has been stopped.

Apple Script for deleting podcasts

I subscribe to a lot of podcasts, but I don't want to keep them in my iTunes library after I'm done listening to them. Is there an Apple Script for automatically deleting podcasts? Thanks.

Thanks - once I'm in Automator and select Music, I don't see any options for finding Podcasts. Any suggestions which item/step I should select next in Automator? Thanks.

Popup Script for Save, edit & Delete Records

Hi Friends,
I developed an application, has got buttons like Save, edit, delete particular records. Is there any Java script for the above, to show popup Screens, like the   confirm java script
<SCRIPT LANGUAGE="javascript">

</SCRIPT>
pls mail me any sample code & Relevant weblogs regarding this.
Regards
CSM Reddy

Hi,
The following code will work... i have tested it.
<b>test.jsp</b>
<%@ page language="java" %>
<html>
     <head>
          <title>
               TestForm
          </title>
     </head>
     <script type="text/javascript">
function confirmSAVE() {
var save = confirm("Do u really want to save")
if (save){
alert("edit confirmed")
window.document.myForm.action="test.jsp"
window.document.myForm.submit()
else
alert("edit cancelled")
function confirmDelete() {
var del = confirm("Do u really want to delete")
if (del){
alert("del confirmed")
window.document.myForm.action="test.jsp"
window.document.myForm.submit()
else
alert("del cancelled")
</script>
     <form name="myForm">
     <body>
          <table>
          <tr>
          <td colspan="2" align="center"><input type="button" style="background-color: #ffffff" name=save onclick="confirmSAVE()" value="SAVE">
          </td>
          <td colspan="2" align="center"><input type="button" style="background-color: #ffffff" name=delete onclick="confirmDelete()" value="DELETE">
          </td>
          </tr>
          </table>
     </body>
     </form>
</html>
When you confirm edit or delete, the same test page will be displayed.
Regards,
Uma
Message was edited by: Uma Maheswari

Is there a stop script for weblogc 4.5.1 on NT

Similar Messages

Maybe you are looking for