Is there a user exit to restrict BOM change and display using material type?
Hi Gurus,
There’s a need to limit access to BOMs on a per material type however the client does not want to use the functionality of "BOM Authorization Group" in BOM header details.
Do we have a user exit that can satisfy the said requirement?
Thanks,
Mae
Hi
Restriction to Changes of BOM will have better control using authorization object .Go to PFCG with your basis guy and try to explore the objects
You can use C_AENR_BGR object to restrict.
Otherwise , try apply BADI BOM_UPDATE
Regards
JH
Similar Messages
-
BADI or User Exit validation of operations tab and displaying an error mess
Hello,
Could you please let me know the BADI or User Exit validation of operations tab and displaying an error message in iw32
Thanks,
Suresh MglHi ..
I tried that user-exit...but i need to block the changes for purchase requisition which is in released stutus..
.i hope i need to do implicite enchancement spot.....could you please help me to do that..
Thanks,
Suresh Mgl -
Authorisation restriction to change batch ( MSC2N ) by material type
Hi ,
We have a requirement wherein we want to restrict users from changing batch records ( MSC2N ) by material type. Viz. A user xyz should not have authorization to change batch for material type FERT.
We cannot use the authorization group ( BEGRU ) field of material master alongwith object M_MATE_CHG as this field is already being used for another purpose to restrict users by country for MM01,MM02 & MM03.
Please do let know if you know of any alternative method of doing so.Hi,
The new authorization object will work only if the corresponding changes are made in the related program.
Open the program code for the MSC2N transaction (via Se93), and search for the string "AUTHORITY-CHECK". You will find a piece of code that checks for the authorization object M_MATE_CHG and its related field values. This will need to be changed to Z_MATE_CHG and its corresponding values.
You will need an ABAP-er for this.
Only then will the authorization check work correctly. Once this is done add the object in the corresponding role (and also change SU24 entry for MSC2N accordingly if required).
Regards,
Sanju. -
Are there any user exit for ess travel?
Hi all
I want to ask,
are there any user exit for ess travel?
and if I want to know if we already had enhancement for back-end system (sap gui)
is it automatically applicable to ess too?
many thankscheck this
ESS: BAdi for Checking Mileage
Thanks
Bala Duvvuri -
User exit to restrict WBS creating Network / PR
Hi All,
I want to know user Exit for WBS to restrict from creating Network or PR . Basically I want to restrict 1st & 2nd level of WBS from creating PR & my client not ready to use any manual method to restrict the same so I want to know any User Exit for the same .
ThanksHi,
Let me again take your queries point wise.
1. Is there any User exit available to restrict the network for only 1st & 2nd level WBS because my user are not ready for User status or for any manual process .
Answer:- Try
CNEX0009 (Material Components in Network)
CNEX0026
PPC00008 (Enhancement in adding and change in Components)
2. Is it possible to give only display authorization for only 1st & 2nd level WBS to some user ( only for those who creates Network in project structure)
Answer:- Yes, try executing SHD0 and create a transaction variant and later on do the changes like which field to make display only and which one to not.
OR
Ask Basis guys if they can help you out in this case.
3. Any way if I creates Network but not possible creates Activity or not possible to assign Material to that Activity ( to restricts Creates PR or Reservation through CJ20n )
Answer:- Try OPSG settings as I mentioned in my earlier post.
OR
Try in OPUA, OPUB and OPUC and search if you hide activity based on INFLUENCING FIELD on LEVELS of 1 or 2 only.
OR
Change Procurement Parameter Indicator of Res/Pur. req to NEVER
OR search in OPUK (Not sure if this can help you)
OR Try using user staus and set it to level 1 and 2 only. You need to use all Object Types of Network. There would be 3 object types related to network and then use the business transaction as Material Purchase Requisition. Set this to Forbidden and then set this user status to WBS/Network.
Have a look at the following screen shot.
I hope this may help you..!!
Regards,
Amit -
Is there any user exit/ badi to populate the partner bank type for F-63.
Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ZFI_FOAP_CDITEMS_00001011 having BKPF and BSEG as only import parameters so I cant change the value for BSEG-BVTYP.
So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
Thanks in Advance,
Steevanhi,
Below r the user exit related to transaction F-63.
Check out if any of them will solve ur Query..
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Reward points if helpful,
Regards,
Brijesh -
Is there a user exit to include Purchase Order (EBELN) in RFFOUS_T?
Is there a user exit to include the Purchase Order Number (EBELN) on the Payment Advice generated from RFFOUS_T? Or is this a custom modification?
I have field REGUP-EBELN defined in the form Z110_US_AVIS_SAP (clone of F110_US_AVIS_SAP), but the print program does NOT populate REGUP-EBELN.Hi,
Please follow this an Example:-
The COOIS report (Order Info System) gives the complete information regarding Production Order like header report, Operation report, Component Report, document report.
This document deals with the addition of extra fields in the output display of COOIS.
For the demo purpose, I have added the material group (MATKL) for the production order material for header report.
BADI Name: WORKORDER_INFOSYSTEM
Method: TABLES_MODIFY_LAY
In the method TABLES_MODIFY_LAY there are many table parameters for different data display of the production order .In this scenario only the header detail structure is being extended with append structure.
Add the extra fields to be displayed to through append structure to IOHEADER_TAB, here MATKL.
In the method write the code for updating the field value.
DATA : BEGIN OF st_matkl,
matkl TYPE matkl,
END OF st_matkl.
DATA : st_header TYPE ioheader.
LOOP AT ct_ioheader INTO st_header.
IF NOT st_header IS INITIAL.
SELECT SINGLE matkl
FROM mara
INTO st_matkl
WHERE matnr = st_header-matnr.
ENDIF.
st_header-matkl = st_matkl-matkl.
MODIFY ct_ioheader FROM st_header.
ENDLOOP.
Regards,
Ravi -
User exit to restrict the Short description ( POS descpn) in Artcile master
Hi
Could you please help me out with the excat user exit for restricting short description (pos description0 in artcile master. It allows 40 characters, i need it to restrict it to 30
Thanks
SreenathHi
I know for IS-R the BADI 'BADI_MATERIAL_OD'. It works for MM41/2/3 but I think that it doesn't work for this field.
I hope this helps you
Regards
Eduardo -
Is there a user exit to modify PO line item level..
Dear Friends,
Is there a user exit to modify PO line item level..
RaviHi...I'm not sure on any available customer exits for this purpose. However you can use the check function exit 'EXIT_SAPMM06E_012' of customer exit MM06E005 and using memory pointers you can change the item level data.
The other option is to use BADI ME_PROCESS_PO_CUST's method PROCESS_ITEM to change the item level value. I would prefer the BADI rather than the customer exit.. Hope it works..
Thanks,
Jude -
I need a user exit to restrict total qantity of yeild, scrap and rework on
Hi friends
I need a user exit to restrict total qantity of yeild, scrap and rework on CO14 (Confirmation of Production Order Detail) not more then total qantity field in CO03 (Production Order Display). Please also mention if what I am asking is theoratically right and if possible please explain a bit from the functional point of view.
Regards,
Anurag JainI resolved it
-
Is there any user exit in CRM_MKT_JOB_WIZARD
Hi All,
Is there any user exit in function module CRM_MKT_JOB_WIZARD? We have a requirement, where user selects 'Immediately' while scheduling job, but still it should be pooled and run over night.
Thank you,
Regards,
Rajesh.Hello,
There is a very easy way to find any BADI setting a breakpoint in class CL_EXITHANDLER.
Everything explained here:
How to find out the BADI triggered in transaction crmd_mktseg?
Regards,
Nicolas Busson. -
Is there a user exit in idoc_inbound_asynchronous
Hi ,
I want to change some data in a segment of the idoc before it is posted in SAP.
I would like to know if there is a user exit in FM idoc_inbound_asynchronous which i can use for ths.
Regards
RajeshThere are no user exits for this functon module. And i dont think any usage for it.
as this is a generic method for IDOC processing so if you want to add some custom data then you can prepare data in your own function module and then post it to this function moduel.
hope this helps.
award reward points for helpful answers -
Is there any user exit in IW54 before document saving?
Dear experts,
Is there any user exit in IW54 before document saving? I want to check some data before saving.
thanks
LanceOr BADI NOTIF_EVENT_SAVE (Change When Saving Notification)
PeteA -
Is there any user exit after saving the material doc
Hi,
Is there any user exit in the T-code:mb01/migo after saving the material doc,?I want to record some data when the doc is saved.
thanks,
lanceHi
Please check <i>The enhancement MB_CF001, includes a function module that is called up immediately before the COMMIT WORK when a goods movement is posted.</i>
Regards
Ramakrishna -
Is there any user exit for changing V1 field value?
Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-IHi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco
Maybe you are looking for
-
Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I
-
Why can't my daughter edit kadak playsport videos in imovie
I purchased an iPad 2 for my daughter along with the camera connect kit and was told on two occasions in the apple store that she would be able to edit the video from her kodak playsport on it! This is not the case the video is imported but cannot be
-
CFP-DIO-550 open multiple input and output at the same time
I am trying to read and write at different times with the cFP-DIO-550. I cant figure out how to read all the inputs at the same time. In the Create Tag.vi, I cant figure what to wire to the Item Name input. I have tried Input 0, and that works, but
-
Hi. I have a Lenove x300 laptop (running XP) hooked up to a Lenovo port replicator. I have external speakers hooked up to the port replicator. Recently, the speakers have stopped working. If I plug the speakers directly into my laptop, they work fine
-
To use the selection screen entry in another program
dear all, i have a requirement that i want to use the selection screen entry of my zmodule pool to the selection screen of a zreport and want to use its output in my module pool. how could i do this in my module pool programing?? i hope u get my ques