Is there a way to capture territory rule changes?

Hello experts,
I need to capture the change log/change history of changes of the Territory rules.
Like if Valid To is changed, then what was the previous value existing for the field.
Is there any way to capture this? Kindly suggest.
Regards.
Devashish

Please check whether rule changes are captured in standard table  crmd_terrman_log
Note: A class CL_CRM_TERRMAN_LOG_API  can be used to do it, This class writes to the CRM table: CRMD_TERRMAN_LOG ( table to log the info required for master data notification) and it has the following methods:
READ_ALL
WRITE
CLEAR
DELETE
UPDATE
Refer:
Change log for CRMM_TERRMAN
Regards,
Arjun

Similar Messages

  • I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
    Thanks again

  • Is there any way to capture maximized event of a Internal frame

    Is there any way top capture maximized and restore event of the Internal Frane ...
    Thanks in advancde
    Ravi

    Yes,
    Check the InternalFrameListener
    There are methods such as
    internalFrameActivated( InternalFrameEvent ife )
    internalFrameDeiconified( InternalFrameEvent ife )
    internalFrameIconified( InternalFrameEvent ife )
    etc.
    Jean-Francois Gilbert

  • Is there a way to only upload iWeb changes? I am not using MobileMe.

    Is there a way to only upload iWeb changes? I am not using MobileMe.

    One method you can use, along with optimizing your website for increased loading efficiency in browsers, is to publsh to a folder on your hard drive and use  Web Site Maestro to optimize and upload only the new or modified files with its Smart Handling feature.
    If you publish to a folder you can use the synchronizing feature of Cyberduck, help/en/howto/sync – Cyberduck, to upload only those new or changed files.
    OT

  • Is there a way to create a rule that sends and Auto Response for a shared mailbox?

    I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
    [email protected]
    [email protected]
    [email protected]
    I would like to create a rule that would send an auto response when someone emails one of these addresses.  However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
    Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
    Nate

    Hi 
    we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
    1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
    2. Configure the Outlook account for the shared mailbox in Outlook.
    3. Click Rules > Manage Rules & Alerts.
    4. Create a rule like the following format:
         Apply this rule after the message arrives
         Have server reply using a specific message
         Except if the subject contains specific words
         Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
    5. Apply the auto reply rules for this shared mailbox.
    Then users can receive auto reply of the shared mailbox except the exceptions we have set  when they send messages to this shared mailbox.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

  • Is there a way to capture video of what you do in preview window

    i find it fascinating to toggle rapidly forth on a scene in the preview window.
    is there any way that i could capture this rapid backwards and forwards movement on video?

    If you upgrade to iLife 09, you can have fast motion, slow motion, reverse motion without any third party tools. [See this link for a screenshot and description|http://www.kenstone.net/fcphomepage/imovie_09stone.html#clip%20adjustments]
    You could also use a screen capture application like Snapz Pro X, or similar.

  • Is there a way to capture the IP address of a user running an APEX app?

    We are trying to capture the IP address of a user logging into our application. Is there a way to do this? thanks

    Karen,
    See the APEX View APEX_WORKSPACE_ACTIVITY_LOG
    Home>Application Builder>Application Utilities>Application Express ViewsJeff

  • Is there any way to capture a list of the steps in editing a particular photo in a text file?

    I have just edited some photos for a friend who was short on time, and now she would like a list of the steps I took in editing.  Is there any way of listing those steps in a text file I could send her?

    Not so far as I know, into a text file. The History is not included in the metadata you can write out to XMP, so it cannot be extracted from there.  The History is embedded in a Catalog only.
    But it would be possible to Export as Catalog one sample image - or, a group of the images concerned. Your friend could open this very small catalog, and view the full History of what has been done to the selection of images it contains.
    Note: the History panel is only available in the Develop module, and you can only get into Develop when the image is not "offline". So your friend would need to get the right picture file(s) referenced into this small Catalog you supply. That can be done by re-browsing the location of the containing folder - so, it is not necessary for the images to be physically  living at the same path in both computers..
    More simply, by writing the final metadata out to the file, and sending the file along with its metadata, at least the finished adjustments can be looked at directly. You only need the Catalog with the History in order to see the sequence - and any changes of mind or explorations that have happened along the way.
    The sequence in which you set nondestructive adjustments does not technically matter; the Catalog method would mainly be of interest, to see an example of your working approach. The nice part about that, is that your friend could click through the History states and see how the image changes on screen - while also watching the sliders, tone curve etc moving around with each new step.

  • Is there a way to capture alerts is iOS5?

    I subscribe to about a half dozen news services and receive a lot of alerts. I don't always check them immediately (like when I'm sleeping--I stay in touch with the news but I haven't gone over the edge yet) so there are sometimes 3 or 4 or more alerts on my phone when I unlock it. I also get the normal missed call and email alerts.
    It seems to be the case that once I unlock my phone, the alerts are gone. It seems silly with an intelligent device to have to write down the source and topic of the alerts so I can track them all down once I'm inside.
    Is there some place I can see my most recent alerts? Or is there a way to keep them alive till I'm done with them? Or maybe an app that would do this for me?
    Missed calls, Tweets, instant messages, and email are easy to find by going to their respective apps, but not all the news sources are kind enough to call out the things you have been alerted about.
    Thanks for any help.

    Well, there they are. I had no idea about the notification center.
    I know. It helps to read th manual.
    Thanks.

  • Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

    Hi,
    I added a list view web part into a SharePoint 2013 page and it  is working as expected, except for one thing.
    I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
    Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
    Thanks in advance for the help.
    Regards,
    P.

    Hi,
    Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
    If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
    In addition, here is a thread with similar requirement that might help:
    http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Is there a way to retain the track changes from a Microsoft Word document when working on a IPAD word processing App?

    I am going on a work trip and want to be able to collaborate with my colleagues, almost all of whom will be using Microsoft Word on Microsoft Windows laptops and I want to draft and collaborate on documents.  The approach we always take to such collaboration is to use the track changes feature in Microsoft Word that shows changes and who made the changes.As best I could tell apples Pages software ignores the notations added by the track changes features and accepts all changes to the document making it difficult to see what changes were made and by whom.
    I would appreciate any suggestions to address this challenge.

    I noted from some similar topics that Pages seems to support track changes but that while it reflects deletions made in Microsoft Word, it does not appear to show them -- is there a way to fix this problem?

  • Is there a way to prevent users from changing the Advanced, Connection, Settings Tab?

    I need to stop network users from changing the proxy settings to avoid the firewall. Is there any way to disable or prevent them from getting to the advanced, connections tab, and changing the settings for the proxy?

    You can lock the corresponding prefs, then users won't be able to change the settings.
    See http://kb.mozillazine.org/Locking_preferences
    See also http://kb.mozillazine.org/about%3Aconfig_entries

  • Just started using Lightroom 5. Is there a way to have imported photo changes in Lightroom automatically happen on my hard drive (MAC), this includes develop/editing changes and location changes. Do I have to import them a specific way or have a change se

    Got tired of iPhoto and finally committing to using lightroom. Using the Lightroom 5 i purchased last year and want to commit to making it my primary way of managing and editing all of my photos ( about 8K). Is there a way to have imported images from my hard drive/Finder (MAC) show as the edited or moved image when i am working in lightroom? Basically want what i am doing in Lightroom to be reflected on my hard drive and vice versa so that i don't have to "add" or "copy" every time I want to work in lightroom.

    No need for apprehension Heath.
    Unfortunately Lightroom does have certain limitations:
    A particular catalog can only be accessed by one instance of Lightroom at one time.
    (ie it is not designed for multiple simultaneous access.);
    As far as I am aware a catalog cannot be accessed remotely although images can be.
    Victoria Brampton has a solution using Dropbox where both the images and the catalog are stored on Dropbox.
    Individual users download the catalog to thier workstation and work on images etc and then shut down Lightroom and update the catalog back to Dropbox.
    No one else should acessing the catalog or images while one user is using the catalog and images otherwise a conflict will arise and someones work will be erased.
    Disclaimer: this sort of setup is NOT supported by Adobe and is not risk free (for more reasons than I have elaborated).
    Tony Jay

  • Is there a way to find all config changes between clients and sap system

    We have our Dev system with clients
    310 - Developer make changes and create transport
    400 - Test client
    410 - a copy of our Production system (over 1 year ago0
    TST - this is our quality system with one client
    101
    Production system one client
    101
    I know if i do a database copy from Production to our TST system, both systems would be exact.
    Abaper Director wants to know all the configuration changes that are different between Devopment client 310 - Test and production.
    I told him that in development client 310 the abaper or functional users make most of the changes if they do  not get transported they would be missing.
    I cannot copy to client 310 otherwise we would loose all of our version management.
    Is there another way that I can see the config changes between all these clients.
    Thanks
    Joe

    You should be able to use tcode SCU0 
    Regards,
    Brian

  • Is there ANY way to keep track of changes or versions in a dynamic form, viewed in Reader

    I need to provide a measure of content control.
    I looked at acrobat.com for help.  There is a rather convoluted method and I don't know if I can get my company to go along with it.
    I have a dynamic form and it has to be dynamic, so I cannot change it to static to give it Comment/Markup ability - out of the question.
    Does anyone know of ANY way to keep track of changes or comments or anything? And if you know, please be as specific as possible.
    Thanks!

    No replies, so I assume that there isn't any way to do this at present. Do people agree that this would be a really useful feature?

Maybe you are looking for

  • Finish material is not showing at the time of confirmation

    Dear all , Finish material is not showing in the goods movement tab .So that movement type 101 is not possible at the prod ord confirmation . Goods movement is accepting in mb31. So plz suggest me

  • Tcode FB15 - assign/clear open items

    I was hoping get clarification on tcode FB15 (Assignment of Open items) In what cases do I need to manually clear a AR document? Maybe customer deposits? For example, if I apply an incoming cash payment to an open invoice, does that gets cleared auto

  • ITrip w/ dock connector giving constant background hiss/static

    i know there really isn't a forum for 3rd party gear but i thought some of you may able to help me out. i am using a 5th gen ipod. for car audio solutions: i started with the griffin roadtrip apparatus.. it was clunky and the sheer weight of the ipod

  • FOR QUEIRY REPORT

    HI EXPERTS, I want the following report PODocno, PO Date, Item NO, Qty,A/P invoiceDocno, A/P invoiceVendor Ref No Where I have copied Purchase order to GRPO and GRPO to A/P invoice I want to show for particular purchase order what is my A/P invoice n

  • Stuck at startup spinning wheel screen :(

    Hi, my macbook is only 4-months old and after running a bit sluggish tonight it beachballed. I shut off the computer, and upon trying to restart it, I've gotten nothing but the gray start-up screen with the spinning wheel. It is also making weird noi