Is there a way to prevent a form user from paging up and down or scrolling through a form?

I'm using Livecycle Designer 8.0. I'm working on a registration form (it's set up like a survey). As users respond to questions, they will be sent to the appropriate next page in the form. In doing so, they will bypass certain pages. However, if users decide to scroll through the document, or page up or down, it will take them to pages that will not be appropriate given their initial responses. In some cases, it will appear that they are responding to the same question.
This was asked before and the answer seemed to be that this is not possible to do. However, it's been a year or two since then. It is my hope that the version I'm using now allows this.
Thank you in advance for any help you can offer.

In this case, you do not want someone (whoever they are DBA etc) to connect as that
particuler user to change the password.Yes, but I wouldn't expect the users to[i] know that password. The connnect would be handled automatically, behind the scenes.
The clear implication of the OP's question and response was that users would not be allowed to change their own passwords. I'm guessing this is in response to a policy that says users mustn't have simple passwords like 123abc or mom. In such a scenario a better approach would be to apply regexp to a user's password to ensure it contains a mix of letters, numbers, punctuation, etc to achieve the desired level of complexity.
So questions, should not be regarded as daft Agreed, but the same is unfortunately not always true of business decisions. As the OP has told us not to ask we cannot know why they want to do this. Personally, I think a user's individual password should always be their responsibility; anything else strikes me as insecure. YMMV.
Cheers, APC

Similar Messages

Is there a way to prevent an end-user from changing their own password?

All you guru's out there, I need your help. Is there a way to prevent an end-user from changing their own password? Is there a function or procedure I can create or what?

In this case, you do not want someone (whoever they are DBA etc) to connect as that
particuler user to change the password.Yes, but I wouldn't expect the users to[i] know that password. The connnect would be handled automatically, behind the scenes.
The clear implication of the OP's question and response was that users would not be allowed to change their own passwords. I'm guessing this is in response to a policy that says users mustn't have simple passwords like 123abc or mom. In such a scenario a better approach would be to apply regexp to a user's password to ensure it contains a mix of letters, numbers, punctuation, etc to achieve the desired level of complexity.
So questions, should not be regarded as daft Agreed, but the same is unfortunately not always true of business decisions. As the OP has told us not to ask we cannot know why they want to do this. Personally, I think a user's individual password should always be their responsibility; anything else strikes me as insecure. YMMV.
Cheers, APC

Is there any way to prevent non-root users from rebooting the system?

This question seems to be addressed many times on the web, but the problem is that none of the wannabe-howtos work on my system. In particular, this doesn't work and this doesn't work either, because (1) I need to keep policykit installed for udisks and other dependencies to function and (2) renaming (or removing) the file /usr/share/polkit-1/actions/org.freedesktop.login1.policy has (again) no effect on the users' ability to reboot and shut down the system. Even more surprisingly, adding the following to /etc/polkit-1/rules.d/20-disable-shutdown.rules has no effect at all:
polkit.addRule(function(action, subject) {
if (
action.id == "org.freedesktop.login1.power-off" ||
action.id == "org.freedesktop.login1.reboot" ||
action.id == "org.freedesktop.login1.suspend" ||
action.id == "org.freedesktop.upower.suspend" ||
action.id == "org.freedesktop.login1.hibernate" ||
action.id == "org.freedesktop.upower.hibernate"
return polkit.Result.NO;
As a result, ordinary users (not in the wheel group and with no special permissions) can simply reboot the machine by typing reboot. I remember that a simple polkit rule (as proposed on the Fedora forum) worked fine just a few months ago, but this doesn't work nowadays. The action IDs mentioned there are no longer listed in pkaction, so it's quite obvious that some changes (and bugs) have been introduced since then. I just need to prevent the users from rebooting the machine and to keep policykit installed. Is there any way to do this?

karol wrote:Do said users have the ability to push the Power or Reset buttons?
No, they don't.
But come on, access permissions are a matter of principle rather than a matter of what you can possibly do with a hammer in your hand. That makes your question somewhat irrelevant to this issue. Imagine someone asking: "How can I protect my home directory from access by other users?" You would then probably ask: "Do said users have the ability to pull out the hard drive and mount it on their computer?"
Even if the users had physical access to the ACPI buttons, rebooting the computer by mistake (via software) would still be much more likely than pressing (or even holding) the ACPI buttons by mistake.
If I call rm -Rf / as a normal user, nothing should happen to the system in terms of availability to other users. Only my home directory and temporary files would vanish, but that's all. This is what permissions are there for. Similarly, when I type reboot as a normal user (no matter if I'm on SSH, on a local terminal or logged into KDE), it should be possible to simply disallow rebooting.
The idea that users logged in locally can restart the computer may be fine for laptops under certain conditions, but it is a bad idea in almost all other cases. In a "kiosk" type environment, for example, the ability to reboot and get to the bootloader can be a huge security hole, unless all your disks are encrypted, and a huge "reliability hole" in any case. Suppose you use a desktop as a home server. You want everyone to be able to log in and to connect a USB flash drive (using polkit and udisks). But you simply don't want the machine to be rebooted. Why is such a simple thing so hard to do?
Last edited by andrej.podzimek (2014-03-10 02:15:35)

Is there a way to prevent a PDF file from being forwarded?

is there a way to prevent a PDF file from being forwarded? For example, im a personal trainer and if i send a client a plan via PDF file, i want to make sure that they cannot send it to anyone else. I read about how you can secure a file by creating an ID and then having the recipient create an ID as well, but i would like to make the orocess as easy as possible for my clients and not have to have them create an ID and then send it to me. is there a better way to block the recipient from resending the PDF?

Hi Kiana,
As such there is no option to prevent the recipients from forwarding the pdf. However you can refer to this blog How do I prevent someone from forwarding a PDF?, it might be of some help.
Regards,
Aadesh

Is there any way to prevent opening the lid from waking my MBP?

Hi,
I have a problem with my screen on my MBP such that when the computer is asleep in its case the lid often comes ajar, wakes the computer, and drains the battery. Is there any way to prevent the lid opening from waking the computer?
Thanks for any ideas on how to fix this.

Option 3: Open Applications > Terminal and type sudo pmset lidwake 0 (you'll be prompted to enter your admin password). To revert to wake on lid open, use the Terminal command sudo pmset lidwake 1.

When changing "browser.newtab.url" is there any way to prevent the address bar from getting focus?

When I change "browser.newtab.url" to about:home and open a new tab, focus is set to the address bar not the search box on the firefox home page. The same thing happens if i change the url to google.com or another search engine. Is there any way to prevent this from happening.

Custom new Tab has a small bug if the start page is exactly the same as the new tab page. Then the focus of the start page is on the address bar. Just leave the "www." out in the startpage and use "www." in the new tab page then it works perfectly. e.g.
Startpage: google.com
new Tab page : www.google.com
Now the focus of the start page is on the search box.

Is there a way to prevent a Blackberry SIM from working in other smartphones?

Hi all,
Just a quick question here - we've tested and found that a SIM card with an iPhone/Android data plan on it won't work in Blackberry (at least not the data portion) but is there a way to prevent a card associated with a BES/BIS data plan from working in other Smartphones? The data use is the big issue for us.
I know this should be as simple as telling our users they're forbidden to do so, but... they're users, and we've had a few go a bit rogue...
Thanks
Environment: Bell Mobility, BESX, ActiveSync
Solved!
Go to Solution.

Hi Sparq,
Current BlackBerry smartphones require access to BIS or BES, which requires special data plans, which is why the iPhone/Android data plans don't work, but as far as I know, the same restriction doesn't exist going the other way. Your best bet would be to call your service provider (in your case, Bell?) and see if they have the ability to apply a restriction on their end. That's really the best chance you'd have for blocking them out.
Of course, if it's a serious enough issue, your company's CEO and management team could make it an offense that could result in the termination of a position as it technically could be considered theft of company assests.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Is there a way to prevent Gift Voucher Email from going to Spam folder?

Everytime I send an email to someone with a Gift Voucher or Discount Code from the system generated emails, they always end up in the Spam folder on GMail, Yahoo, etc.
Is there a way to prevent emails from being labeled as Spam with this system?

Hi Mario,
We have this problem too.
We have a vaid From email address and ours is hoted with you and your info link above says "If you are choosing to host your domain with us there is no need to do anything here. Based on our system architecture we are generating that SPF record so that all the emails sent from this domain will have include all the IPs from where emails are being sent and make sure that you will pass the SPF check."
Yet our gift vouchers and also our newsletters are ALL going to spam. It's happening to both our business catalyst sites - so is Business Catalyst being marked as a spammer and affecting us?

Is there a way to prevent an Airport Extreme from dropping an inactive device

I have the latest Airport Extreme with the latest software versions. Connected wirelessly are 2 iMacs, 2 iPads, 2 iPhones, and a printer.
Is there a way to prevent the AE from dropping an inactive device?
If any of the normally connected devices are inactive for several hours, they have to reconnect to the AE. It does not seem to cause any problems with the iMac's other than a nuisance but the iPads and iPhone occasionally seem to have a problem and it can take several minutes to reconnect to the AE.

Set dhcp reservations for each device. Beyond that there is nothing you can do in the AE to stop the device dropping out.. it is an issue on the client not the AE.
But something is wrong for it to take several minutes to connect.
What device in your network is the router? Is it the AE? (BTW the latest AE is not gen5 as per your profile.. but Gen6).
If the main modem is also a router and you have the AE setup in bridge, then all controls are in the router.
Some routers are set with a limited number of DHCP addresses and it will take time to expire one address for another to join.. check if that is the problem. But setting dhcp reservation as I suggested should fix it.
No luck.. then loads more info on the network .. modem.. make and model.. what role it has in the network.. ie is it also router?
AE setup?
Is the problem new or has it been ongoing since an upgrade to something.

Is there any way to prevent my SSIS Tasks from reformatting themselves when I want to change the Name

So all my tasks are nicely laid out in my SSIS Package. Now I want to go add a blurb to the Name to make it a little more descriptive. When I do that, Microsoft Visual Studio just automatically re-sizes the task so the entire description, name fits. When
I make it the right size, my scripting name is wrapping and that's the way I want it to look within my Package. Is there any way to stop Microsoft Visual Studio from automagically adjusting the size of my task when I click on the Name to edit?
Thanks for your review and am hopeful for a reply.

There is no way. The designer canvas received improvements in SSIS ver 2012, but this specific aspect remain unchanged.
What I do I simply use the Format -> Autolayout -> Diagram or you can also/instead Ctrl-A to select all and choose "make same size"
Arthur
MyBlog
Twitter

Is there a way to prevent your iMessage txts from being shared on all your apple devices?

Is there a way to prvent your iMessage txts from being shared on all your apple devices?

Hi,
not sure where to find original post. In RDB, it is MSP_EpmTask_UserView.TaskClientUniqueId.
Sorry, if there are now 2 answers.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Is there any way to prevent non-admin user accounts to receive software update prompts?

I am the admin account user on our MacBook Pro, and there is one standard user account on it as well. Generally we are both logged on so we can quickly switch between user accounts and 'spin the desktop'.
For some reason, all the software update notifications seem to be received when the standard user account is the active one.
I know that the standard user cannot actually update without my account password and my Apple ID, but a) The notifications confuse the non-admin user, and she gets flustered, and b) Even if she manages to cancel them from the notification area, she then has to remember to tell me verbally that she had had one.
Is there any way to stop her receiving the update notifications altogether?
Running OS X 10.8.2 on MacBook Pro.
Thanks in advance.

You should be able to do this by unchecking the software update service in the system preferences to prevent the system from running the check as the "_softwareupate" user and passing it to the notification service that broadcasts to all user accounts. Then you can check for the software update in an admin account using the following Terminal line:
/System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateCheck -Check YES
This line can be scripted via Terminal services to run on a schedule (ie, every few hours), and if there are found updates it will launch the App Store for that account and present them. Granted this approach circumvents the notification service, but should work. To try this, open TextEdit on your computer and in a new document choose "Make Plain Text" from the Format menu.
Then copy and paste the following text into the new document:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>local.softwareupdatecheck</string>
          <key>ProgramArguments</key>
          <array>
                    <string>/System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateCheck</string>
                    <string>-Check</string>
                    <string>YES</string>
          </array>
          <key>StartInterval</key>
          <integer>21600</integer>
</dict>
</plist>
When done, save the document to your desktop as "softwareupdatecheck.plist" or anything as long as it ends with ".plist." Then get information on the file in the Finder to ensure its name ends with plist and not anything else like "plist.txt" (rename it accordingly in the Info window's "Name & Extension" section.
With the file name appropriate, hold the Option key and choose the "Library" option in the Finder's "Go" menu. Then locate the folder called "Launch Agents" in the library and drag the text file to this folder. Then log out and log back into your account.
This text file is a launch agent script that instructs the system to run the program arguments every 21600 seconds (6 hours) whenever the user is logged in. The program arguments here are simply those to check for software updates for the system. You can change this time interval to be any number of seconds you would like, but there are other options to use besides the "StartInterval" key for scheduling the task. This approach simply has it repeat every number of seconds, but you can use other options to have it only run on specific hours or days, or only have it run once when you log in, etc.
If this works for you, then if you'd like to explore these other options write back here and we can go over them for you.

Is there a way to prevent the "task id" from changing automatically when a task is moved or inserted?

When moving a task in Project 2010 I've found task IDs also change. This is not the desired result. If a task is moved for whatever reason the task ID should not change. It should be consistent to the task. For example, I've created
a new project with five tasks as shown on the left below.
I've numbered the tasks to coincide with the task ID as originally created. If I move Task 4 to be after Task 1 the moved task and all subsequent tasks are renumbered as shown on the right below.
This is not the desired result. The expectation is the task ID is unique to the task when the task is created. It should never change after the fact. I view the task ID as the identity field for the task. In database terms this means
it NEVER EVER arbitrarily changes.
A similar problem occurs if a task is inserted between two tasks. If I insert task 6 after task 2 the task IDs are renumbered as shown.
Again, the task ID should never have been arbitrarily changed. This creates a referencing problem because task 6 should have had the next available higher task ID which should have been 6 and all the tasks after task 6 would not have been renumbered.
The only work around to this behavior is to create a custom number field called "Task ID" and manually assign numbers to each task. This makes referencing the tasks easy when communicating with team members. Using the built-in task
id as a reference risks the task ID being lost at any point and confusion for team members.
Is there a way to turn-off task ID renumbering when a task is moved or inserted?
Ideally any inserted task should be the next higher available task ID.
Thanks

Hi,
not sure where to find original post. In RDB, it is MSP_EpmTask_UserView.TaskClientUniqueId.
Sorry, if there are now 2 answers.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Is there any way to prevent a wifi network from becoming known?

Hi,
I'm on mid 2010 Macbook Pro running OS X 10.9.4 and I can't figure out a way to prevent a certain wifi network from becoming known. My college's network requires an in browser sign up every time and once the network becomes known it gives me an SSL error until I remove it from the list of known networks and refresh. Not too painful, but definitely something I'd like to fix. The only post I could find about this was from 2007, so I wanted to see if anything had changed. Any ideas?

In Network Preferences > Airport > Advanced, do the following:
Delete the network from the saved list of wireless networks
UNcheck "Remember networks this computer has joined"
Also (and this is equally important), every time you join this particular network, be sure to UNcheck "Remember this network" in the sign-on dialog.

Is there any way I can recover deleted pictures from Camera Roll and iCloud? Please please help me. All of my precious pictures are gone that I can never EVER get back. I dont have any iCloud or Camera Roll backup; and my PC can't download more software.

Hi everyone! I'm in need of extreme help. You see, today, two months ago I went out of the country from the United States of America. I took about 1500 pictures ONLY on my iPod touch. When I returned to the United States to my home, I accidentally deleted a little more than 100 pictures. Then, thinking I could get ALL of the pictures back at once, I restored my iPod touch from an iCloud backup I had a couple of days before. Instead of getting all of my pics back, they all got erased. The pictures that I did delete were deleted from Camera Roll AND Photo Stream (iCloud). Then, I was only able to get about 500 pictures back from iCloud. So about 1000 are still gone. When i did the restore, I thought all my pictures would be there, but they weren't and I couldn't possibly figure out why; because a restore from iTunes or iCloud is supposed to restore your device to the settings of the time you backed up your device. All of my other settings were just the way they were supposed tone for the time being, all except my pictures, which contained not one picture in any folder. So EVERYTHING from Cameta Roll was gone, and only about 500 pictures survived. I kept retoring and restoring, hoping they would come back but unfortunately they didn't. Then one time a restored again, I saw all of them back!! But then, within a blink of an eye, they disappeared as soon as I tapped on one picture. Then, I knew they were still in reach, but I just had to find them. Where could those 1000 pictures go? I looked up how to recover deleted photos, but I have to install a software. My computer CANNOT possibly take anymore software on it, my PC is very sensitive and I cannot delete anything off of it. Please please help me. What can I do to get my pictures back? They are memories that I can never EVER EVER get back. Thank you so much.

Please please help me, if you know how.

Is there a way to prevent a form user from paging up and down or scrolling through a form?

Similar Messages

Maybe you are looking for