Is there a way to restrict the number of attempts for a remediated question using advanced actions?

I have the following slides in my project:
content slide 1
content slide 2
question slide 1
question slide 2
Question slide 1 is a question about content slide 1. Question slide 2 is a question about content slide 2. I would like to restrict the total number of attempts to two for each question. If question 1 is answered incorrectly on the first attempt, the learner would be returned to content slide 1 for review. Clicking the next button will take the learner back to the missed quiz question and allow them a second attempt to answer it correctly. If they answer it incorrectly again, it is scored as incorrect and the learner is taken to question slide 2.
Can this be done or does remediation keep repeating until the learner answers the question correctly?
If that is the case, can I achieve my objective by using advanced actions? And, if so, can you provide step by step instructions on how to do this?

I think it could be possible, but giving you step-by-step instructions, sorry, that would take a lot of time. Did you use advanced actions already? My archived blog has a lot of use cases and tutorials, but I think it is not fair to ask on a forum for step-by-step instructions for each use case you want to create. The most important thing will be to make sure that the user always remains in the Quiz scope, you can use the new system variable cpInQuizScope while testing. There is no system variable for attempts on question level, only one on Quiz level, so you'll have to create a user variable to track the attempts on question level. A big problem is that when you leave a question slide, without using the remediation work flow, the attempts are considered as finished. Personally I would prefer for that reason to not use the default question slides. You could try out a combination of remediation and advanced actions, never did test that?
Lilybiri

Similar Messages

Is there any way to limit the number of times that a PDF can be opened?

I run a small publishing company and we want to provide exam copies of our books to professors. At present our exam copies have the words EXAM COPY as a water mark on every page and we've also made the files so that they can't be printed or easily copied. However, we'd like to also restrict these PDFs so that they can only be opened 5 times. I've read about FileOpen but that approach seems a bit more complex than needed. Is there any other way to restrict the number of times that a PDF file can be opened once it is downloaded? Thanks in advance for any suggestions.

DRM soltions like FileOpen are your best bet for PDFs. Others include Adobe's LiveCycle Rights Managment, LockLizard, Armjisoft PDF Security OwnerGuard, etc.
They all work and are priced differently, but there's really nothing for what you want to do that is both simpler and secure.

Is there a way to control the number of concurrent SMTP connections on Database Mail?

Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

Hi rkohler,
Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
of concurrent connections.
There is similar issue about database email on SQL Server 2005, you can refer to the following post.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Date picker - is there a way to restrict the minuit select list to 1/4 hr

Hi,
When using date picker item with format 'DD-MON-YYYY HH24:MI',
Is there a way to restrict the minuit select list on the calendar to 1/4 hr instead of 00 to 59. Example: 00,15,30,45
Thank you,
Francis

Hold down command key to select multiple songs, then "Get Info", and you will modify all fields at the same time.

Is there a way to increase the number of layers in PS touch for iPad? Can Adobe do something about this?

Is there a way to increase the number of layers in PS touch for iPad? Can Adobe do something about this? I have been using PS touch for iPad for a few years and ALWAYS end up with a message that I have reached the maximum allowable number of layers. not to mention of course a simple tool for drawing straight lines which is a must. I may be missing something. I would have imagined that a respectable company like Adobe would have added over the years a small upgrade to solve these issues.
thanks.

Hi Patrick,
I'm working on a 30" monitor, so it's effectively 2560x1600. It only seems to be showing 2 tracks at a time, unless there is a preference or setting I'm missing that I can't seem to find in the documentation. Here is a screenshot:
I don't see any areas for expanding the timeline. I can scroll vertically in the timeline, but I can't seem to actually get a larger static vertical area for showing more tracks at once. The only vertical resizing widget is to expand the bottom or top panels, not the timeline.
Thanks,
Jason

Is there a way to find the number of downloads of music from itunes store?

Hi,
Is there any way to find the number of downloads of each music file available on itunes store. If not exact no of downloads but atleast a relative term to find the rank of the music track From any API
Thanks
Sandeep

A: Is there a way to read the number of active sequence executions from the Engine?

Scott,
> One way of handling the issue of init once a set of instruments is to
> create a new sequence file that has a sequence to init and a sequence
> to close the instruments. Assuming that you always terminate a
> sequence and do not abort them, you could add a ProcessSetup and
> ProcessCleanup callback sequences to the client sequence file that
> using these instruments. These callbacks are automatically called by
> the process model in both the Single Pass and Test UUTs execution
> entry points. The callback sequences could call the init and close
> sequences for the hardware. In the hardware sequence file you could
> reference count the number of execution that init and close by setting
> the file globals in the sequence file to be shared across executions
> and then add a numeric value that keeps track of references for the
> instruments. The init sequence adds to the count, and the close
> sequence subtracts from the count. The init sequence inits the HW if
> the count is 0->1 and the close sequence closes the HW if the count is
> 1->0.
>
> This is one of many ways in TestStand that this could be done, not to
> mention that this could also be done in a similar way in a LabVIEW VI
> or DLL directly.
That sounds like it will work. I'll try adding a client count
increment/decrement in the DLL initialize and terminate functions. This
should essentially perform the same tasks as the callback scheme you mention
above, no?
The reason I didn't think the 'client counting' scheme would work initially
was I mistakenly thought that the termination function would not get called
under Terminate conditions. Since Terminate conditions happen a LOT during
our initial debug of new UUT types, I didn't think that would be acceptable.
I forgot that lacing the terminate funciton in a cleanup step group, I can
force it to be called in Terminate conditions.
> If you abort an execution then the reference counting idea above would
> fail to decrement properly. That might b... [Show more]
Read other 5 answers

Is there any way to limit the number of Threads running in Application(JVM)

Hello all,
is there any way to limit the number of Threads running in Application(JVM)?
how to ensure that only 100 Threads are running in an Application?
Thanks
Mohamed Javeed

You should definitely use a thread pool for this. You can specify maximum number of threads that can be run. Be note that the thread pool will only limit the number of threads that are submitted to it. So donot call "Thread"s start() method to start thread on your own. Submit it to the pool. To know more, study about executor service and thread pool creation. Actually it will not be more than 20 line code for a class and you might need maximum of 2 such classes, one for threadPool and other one for rejection handler (if you want).
Just choose the queue used carefully, you just have to pass it as a parameter to the pool.
You should use "Bounded" queue for limiting threads, but also be careful in using queues like SynchronizedQueue as the queue will execute immediately the threads submitted to it if maximum number of threads have not been running. Otherwise it will reject it and you should use rejection handler. So if your pool has a synchronized queue of size 100, if you submit 101th thread, it will be rejected and is not executed.
If you want some kind of waiting mechanism, use something like LinkedBlockingQueue. What this will do is even if you want 100 threads, you can specify the queue's size to be 1000, so that you can submit 1000 threads, only 100 will run at a time and the remaining will wait in the queue. They will be executed when each thread already executing will complete. Rejection occurs only when the queue oveflows.

My iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

my iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

If you had find my iphone activated on the iphone itself before it was stolen, then you may be able to track it.
Otherwise, there is nothing you can do.
Sorry.
Report it to the police and your wireless carrier and change your password.

Is there a way to view the timecode in iMovie for Mac?

Is there a way to view the timecode in iMovie for Mac? This is such a basic feature needed for editing; I can't believe it wouldn't be available. Am I missing something?

Do the math means you know the timecode at the beginning of each clip and when you mouse over a transition or clip you know the clip length. If you trim the clip you see how much you are trimming. With these numbers you can caulate the cursor position or find the timecode value at any frame in the clip. I am not saying it is an elegant process by any means, but if you really need to, this will work. Obviously it is a grievius situation Apple has left us in regarding timecode.

Is there any way to download the Adobe Application Manager for Mac 10.5.8?

I just subscribed to the monthly inDesign plan and was unaware I had to upgrade my system. Is there any way to download the Adobe Application Manager for Mac 10.5.8?

LisaK78 wrote:
I am trying to upgrade to Snow Leopard but I cannot figure out how to do it online. Do I actually need to purchase the disc and install it that way? Is there no way to download the update?
See:
Software update, upgrade--what's the difference?
http://support.apple.com/kb/HT1444

Is there any way to stop the delay between different sets of speakers when using airport express?

Is there any way to stop the delay between different sets of speakers when using airport express?

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

Is there a way to control the number of consumed messages from JMS?

Hi everyone,
I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
Thanks

Hi,
Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
Cheers,
Vlad

Is there a way to Limit the number of guest accounts a Sponsor can create from the sponsor portal?

Hello,
I am trying to find a way to limit the number of guest accounts a Sponsor can create from the portal. I am running ISE 1.2 and I am finding it difficult to limit the number of guests a sponsor can create.

Interesting feature that unfortunately is currently not possible. I also don't think this is a feature that will be offered in the highly anticipated v1.3. I would recommend that you reach to your Cisco team and request this feature.
Thank you for rating helpful posts!

Is there a way to restrict the network access of an application?

Is there a way to restict the network access of an application? In other words, is there a way to guarantee that an application will only operate in offline mode?

Well, more than just knowing if an application will work in offline mode, I'm interested in whether there's a way to forcibly the revoke network access of an application. For example, I don't think something like an epub reader should have network access and I want to insure it does not communicate to an external server.

Is there a way to overcome the two-connection limit for XMLHTTPRequest?

Hi, I'm using AIR SDK 2.5 from HTML/Javascript.
According to the same origin policy (SOP) there's a max of two request that can be sent to the same domain/port using AJAX (XMLHTTPRequest).
I have a long polled connection that is almost always using one ajax request, so I have only one left.
Is there a way to change the security settings in order to allow more than two simultaneous requests to the same domain/port?
Thanks,
Guille

Hi Guille,
The AIR runtime is using the Internet Explorer network stack on Windows and the Webkit's on Mac and Linux. The maximum number of connections is limited by the corresponding stack and cannot be modified from AIR.
Regards,
-Catalin

Is there a way to restrict the number of attempts for a remediated question using advanced actions?

Similar Messages

Maybe you are looking for