Is there a way to use Labview for Linux for IBM AIX 5.1.

I think any application built for linux can run on the AIX 5.1 if the application is recompiled on the AIX 5.1. So theoretically NI can just recompile there Linux version of Labview on the AIX 5.1 and it will work. Is there a possibility that NI will port Labview for AIX 5.1.

I think that the use of LabVIEW for linux is platform independent as far as hardware. I believe that as long as you are running a compatible GUI (I believe XWindows and KPT??? are two that are recommended - check ni.com/linux for more information. So, for your purposes, as long as you can install the proper GUI, and then LabVIEW for Linux, you can then run, code, compile, and deploy applications on the AIX 5.1.
I am personally VERY interested in knowing about your success (or failure, should that unlikelyhood occur) on Linux. If you browse the topics, there is actually one on non-windows useage of LabVIEW. I am currently setting up my first Linux machine at my home office, and am very curious to know how other people do with this 'adventure into unc
harted territory'. The only documented useage I have seen is in Gary Johnson's newest edition of Power Programming.
Good luck, and please keep us posted. I sense that I am the only LabVIEW for Linux fan besides yourself. But please feel free to post to this thread, and to the topic.

Similar Messages

  • Is there a way to use a single bitmapdata for multiple images with GPU mode?

    With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
    I have an app that runs in GPU mode - but I want to optimize the image management.
    I am making three sets of images in the orders of 2048, 1024 and 512 px.
    The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
    Is there a way to do this - e.g. using a masking technique?
    I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
    Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
    PNGs may be better for GPU - (no compositing) but they make for a huge app file.
    Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha.  What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general. 
    Any thoughts on optimizing would be appreciated.  I can add my code here if it helps.

    Tell Apple:
    http://www.apple.com/feedback/iphone.html
    We're all users here, just like you.

  • Is there a way to use Dropbox with Garageband for iPad?

    I'd like to be able to Garageband projects on my iPad then upload them so students could download them and work on them and resubmit them.  Does Dropbox work with this?  Also, once I put an iPad project into the desktop version, can the iPad version use it again?  Thanks for your help in advance!

    The only way I see it working for the moment is prepping the tune on GB, sending to the students via email, then the students upload the file to GB via iTunes so they can interact with it.
    I'm still in a hybrid (iPad, PC) so I do not know about using a version of the song modified on GB for Mac.

  • TS4036 I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

    I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

    Welcome to the Apple community.
    You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
    Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc.

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • I'm using TestStand/Labview to do a string value test. Is there any way to use a variable in the edit string value test?? This forces you to hard code a string to test against.

    I'm using TestStand 2.0/Labview 6i to do a string value test. Is there any way to use a string variable in the edit string value test instead of an actual string?? This forces you to hard code a string to test against.

    Hi ART,
    You can also use the LimitLoader step to load your string into to step similar to the Numeric Step type.
    There should be an example of this in the Resource Library | TestStand
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    Welcome to the Apple Community.
    Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
    Any responses you may receive may well be removed and would be wholly unreliable in any case.
    If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

  • Is there a way to turn on auto complete for text that has to be entered repeatedly? I don't want to use a pop up list.

    Is there a way to turn on auto complete for text that is repeated? I don't want to use a pop up list.

    No, not in Number for iOS.

  • Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Mac OS X 10.6 Help: Sharing your Internet connection

  • Is there any way to use a aunetreceive for a track within GarageBand?

    Is there any way to use a aunetreceive for a track within GarageBand?
    I have an application, Soundboard, which sends audio via the aunetsend plugin. I'd like to manage the output of this application within Garageband as a track. Is there any possible way to do this?
    Thanks

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Is there any way to use a For Each Loop for each property of an User Defined Type?

    Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
    Jorge Barbi Martins ([email protected])

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • I installed iCloud on to a pc.  The shorts cuts did not include notes.  Is there a way to have a short cut for notes or do I need to logon to icloud every time to use notes on my pc?

    I  installed iCloud on my pc and the short cuts did not include notes.  Is there a way to create a short cut for notes or do I have to logon to iCloud every time I use notes on my pc?

    Open the Mac App Store on your MacBook Pro
    Hold the Option key and click on “Purchases”
    Hold the Option key and click on “OS X Lion” from the purchased app list
    “Installed’ should now say “Install” which allows you to download OS X Lion.
    This assumes you are using the same Apple ID on both computers.
    Lion does not get installed on an iPad. It runs iOS.

  • I have the find my ipod app on my ipod and i lost it somewhere in my home. is there a way to use that find my ipod fature from my computer? i was hoping that the loud noise would help me to look for it.

    I have the find my ipod app on my ipod and i lost it somewhere in my home. is there a way to use that find my ipod fature from my computer? i was hoping that the loud noise would help me to look for it.

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone
    - You can also have to iPod play a sound via iCloud.

  • I received a goggle play gift card for Christmas.  Is there a way to use this card in the ITune store ?  Or is there a way to convert the google card credit into Itune credit ?

    I received a google play gift card for Christmas.  Is there a way to use this card in the App store or Itune store ?  Or is there a way to convert the google credit into itune credit ?

    No - sorry.
    GB

  • Is there a way to use standard Windows widgets?

    Is there a way to use standard Windows widgets inside LabView (6.1)? Check boxes, form controls, et c.?

    If you want to use ActiveX controls, you place an ActiveX container on the front panel, right click, choose Insert ActiveX Object and then browse for the object you want. There's several shipping examples like FamilyTree (MS TreeView object), and Ribbon, Simple Curve, and Torus that use ActiveX objects from NI.

Maybe you are looking for